|
|
|
|
|
|
|
[Sell]
Probecom 7.3M Rx only antenna,ring-focus antenna |
 |
|
Probecom professional supply Earth Station Antenna, Satellite Antenna, Fixed Station, VSAT Antenna, RX only Antenna,SNG Antenna,0n-the-move Antenna,Design Antenna,Cassegrain Antenna,Ring -focus Antenna,C/KU Band Antenna, on-the-move Antenna,Satellite Dish Antenna,Fly away antenna, Microwave components
Probecom 7.3M Rx only Antennas
Intelsat approved antenna&Customized satellite antenna manufacterur
Highlighted Features
*Meets CCIR 580 and INTELSAT Requirements
*CP/LP switchable feed
*High RF performance
*Galvanized stainless steel hardware
*Different frequency ranges from many feed configurations
*Ka band antenna with rotary pedestal is available
* Antenna reflector be pre-assembly in works, special designed taper-pin easy instllation and ensure on site assembly accuracy ,no theodolite required
Options
*L,S,X bands and multi-bands
*800MHz bandwidth is available
*Full motion antenna
*Feed blower or deicing with automatic controls
*Two or four Tx/Rx port in linear or circular polarized feeds
Antenna Accessory
Motorization Kits
Limit Switches
ODU Support Kits
Factory Feed System Testing and Documentation
Ocean /AirTransport Packing
Foundation Kit
Lightening Rod Kit
Grounding Kit Cable-Mounting Kit
Anti-icing and Deicing
|
|
» Posted by: Shaanxi probecom microwave technology co,ltd [China]  |
|
|
|
|
|
[Sell]
Probecom 2.4m VSAT antenna |
|
|
Probecom 2.4m VSAT antenna
Intelsat approved antenna&Customized satellite antenna manufacture
Features:
Meets or Exceeds CCIR 580 and INTELSAT Requirements
High G/T, Excellent Pattern Characteristics
Thermal Spaying Zinc Steel Ground Mount Assembly
C-band Antenna Operating in 800MHz Bandwidth Option
2-port, 3-port or 4-port Linear/Circular Feed
Field Changeable Feed System, Switchable Circular to Linear C-band
Antenna Az 0-360deg Continuous Pointing Range
2.4m C/Ku band earth station antenna specification
ELECTRICAL SPECIFICATION:
Operating Frequency, GHz
C-Band:Rx(3.625-4.2) Tx(5.85-6.425)
Ku-Band:Rx(10.95-12.75) Tx(14.0-14.5)
Polarization: Linear/ Circular
Radiation Pattern:First Sidelobe less than -14, Meet ITU-RS.580-5 and other requirements
MECHANICAL SPECIFICATION:
Azimuth 60 degree (Continuous)
Elevation 0 degree -90 degree (Continuous)
Polarization 180 degree (Continuous)
Finishes Reflector Surface Pedestal & Back Structure Aluminum panels with high-diffusing white paintThermal Spraying Zinc
ENVIRONMENTAL SPECIFICATION:
Operational Wind 72km/h Gusting to 97km/h
Survival Wind 216km/h
Temperature - 40 degree C - + 60 degree C
Relative Humidity 100%
Solar Radiation 1135Kcal/ h/ m2
Seismic (Survival) 0.3g (H), 0.15g (V)
4.5m earth station antenna,3.7m earth station antenna,6.2m satellite antenna,4.5m satellite antenna,6.2m fixed station,4.5m fixed station,3.7m VSAT antenna,3.7m satellite antenna,3.7m RX only antenna,3.7m fixed station,9m earth station antenna,2.4m VSAT antenna,2.4m satellite antenna,2.4m fixed station,7.3m fixed station,16m earth station antenna,3m earth station antenna,11.3m earth station antenna,11m satellite antenna,sng antenna,0n-the-move antenna
Contact person:Jasmine zhang
E-mail:sales@probecom.cn
TEL:0086-29-83115011
FAX:0086-29-83115033
Add:Keji Road, Xi'an, Shaanxi, China
Web: www.probecom.cn
|
|
| » Posted by: Shaanxi probecom microwave technology co,ltd [China] |
|
|
|
|
|
[Sell]
Probecom 4.5m VSAT antennas |
|
|
Probecom 4.5m VSAT antenna
Intelsat approved antenna&Customized satellite antenna manufacture
Features:
Meets or Exceeds CCIR 580 and INTELSAT Requirements
High G/T, Excellent Pattern Characteristics
Thermal Spaying Zinc Steel Ground Mount Assembly
C-band Antenna Operating in 800MHz Bandwidth Option
2-port, 3-port or 4-port Linear/Circular Feed
Field Changeable Feed System, Switchable Circular to Linear C-band
Antenna Az 0-360deg Continuous Pointing Range
4.5m C/Ku band earth station antenna specification
ELECTRICAL SPECIFICATION:
Operating Frequency, GHz
C-Band:Rx(3.625-4.2) Tx(5.85-6.425)
Ku-Band:Rx(10.95-12.75) Tx(14.0-14.5)
Polarization: Linear/ Circular
Radiation Pattern:First Sidelobe less than -14, Meet ITU-RS.580-5 and other requirements
MECHANICAL SPECIFICATION:
Azimuth 60 degree (Continuous)
Elevation 0 degree -90 degree (Continuous)
Polarization 180 degree (Continuous)
Finishes Reflector Surface Pedestal & Back Structure Aluminum panels with high-diffusing white paintThermal Spraying Zinc
ENVIRONMENTAL SPECIFICATION:
Operational Wind 72km/h Gusting to 97km/h
Survival Wind 216km/h
Temperature - 40 degree C - + 60 degree C
Relative Humidity 100%
Solar Radiation 1135Kcal/ h/ m2
Seismic (Survival) 0.3g (H), 0.15g (V)
4.5m earth station antenna,3.7m earth station antenna,6.2m satellite antenna,4.5m satellite antenna,6.2m fixed station,4.5m fixed station,3.7m VSAT antenna,3.7m satellite antenna,3.7m RX only antenna,3.7m fixed station,9m earth station antenna,2.4m VSAT antenna,2.4m satellite antenna,2.4m fixed station,7.3m fixed station,16m earth station antenna,3m earth station antenna,11.3m earth station antenna,11m satellite antenna,sng antenna,0n-the-move antenna
Contact person:Jasmine zhang
E-mail:sales@probecom.cn
TEL:0086-29-83115011
FAX:0086-29-83115033
Add:Keji Road, Xi'an, Shaanxi, China
Web: www.probecom.cn
|
|
| » Posted by: Shaanxi probecom microwave technology co,ltd [China] |
|
|
|
|
|
[Sell]
Probecom 2.4m C/KU band antenna |
|
|
Probecom 2.4m C/KU band antenna
Intelsat approved antenna&Customized satellite antenna manufacture
Features:
Meets or Exceeds CCIR 580 and INTELSAT Requirements
High G/T, Excellent Pattern Characteristics
Thermal Spaying Zinc Steel Ground Mount Assembly
C-band Antenna Operating in 800MHz Bandwidth Option
2-port, 3-port or 4-port Linear/Circular Feed
Field Changeable Feed System, Switchable Circular to Linear C-band
Antenna Az 0-360deg Continuous Pointing Range
2.4m C/Ku band earth station antenna specification
ELECTRICAL SPECIFICATION:
Operating Frequency, GHz
C-Band:Rx(3.625-4.2) Tx(5.85-6.425)
Ku-Band:Rx(10.95-12.75) Tx(14.0-14.5)
Polarization: Linear/ Circular
Radiation Pattern:First Sidelobe less than -14, Meet ITU-RS.580-5 and other requirements
MECHANICAL SPECIFICATION:
Azimuth 60 degree (Continuous)
Elevation 0 degree -90 degree (Continuous)
Polarization 180 degree (Continuous)
Finishes Reflector Surface Pedestal & Back Structure Aluminum panels with high-diffusing white paintThermal Spraying Zinc
ENVIRONMENTAL SPECIFICATION:
Operational Wind 72km/h Gusting to 97km/h
Survival Wind 216km/h
Temperature - 40 degree C - + 60 degree C
Relative Humidity 100%
Solar Radiation 1135Kcal/ h/ m2
Seismic (Survival) 0.3g (H), 0.15g (V)
4.5m earth station antenna,3.7m earth station antenna,6.2m satellite antenna,4.5m satellite antenna,6.2m fixed station,4.5m fixed station,3.7m VSAT antenna,3.7m satellite antenna,3.7m RX only antenna,3.7m fixed station,9m earth station antenna,2.4m VSAT antenna,2.4m satellite antenna,2.4m fixed station,7.3m fixed station,16m earth station antenna,3m earth station antenna,11.3m earth station antenna,11m satellite antenna,sng antenna,0n-the-move antenna
Contact person:Jasmine zhang
E-mail:sales@probecom.cn
TEL:0086-29-83115011
FAX:0086-29-83115033
Add:Keji Road, Xi'an, Shaanxi, China
Web: www.probecom.cn
|
|
| » Posted by: Shaanxi probecom microwave technology co,ltd [China] |
|
|
|
|
|
[Sell]
Probecom 3.7m VSAT antenna |
|
|
Probecom 3.7m VSAT antennaS
Intelsat approved antenna&Customized satellite antenna manufacture
Features:
Meets or Exceeds CCIR 580 and INTELSAT Requirements
High G/T, Excellent Pattern Characteristics
Thermal Spaying Zinc Steel Ground Mount Assembly
C-band Antenna Operating in 800MHz Bandwidth Option
2-port, 3-port or 4-port Linear/Circular Feed
Field Changeable Feed System, Switchable Circular to Linear C-band
Antenna Az 0-360deg Continuous Pointing Range
3.7m C/Ku band earth station antenna specification
ELECTRICAL SPECIFICATION:
Operating Frequency, GHz
C-Band:Rx(3.625-4.2) Tx(5.85-6.425)
Ku-Band:Rx(10.95-12.75) Tx(14.0-14.5)
Polarization: Linear/ Circular
Radiation Pattern:First Sidelobe less than -14, Meet ITU-RS.580-5 and other requirements
MECHANICAL SPECIFICATION:
Azimuth 60 degree (Continuous)
Elevation 0 degree -90 degree (Continuous)
Polarization 180 degree (Continuous)
Finishes Reflector Surface Pedestal & Back Structure Aluminum panels with high-diffusing white paintThermal Spraying Zinc
ENVIRONMENTAL SPECIFICATION:
Operational Wind 72km/h Gusting to 97km/h
Survival Wind 216km/h
Temperature - 40 degree C - + 60 degree C
Relative Humidity 100%
Solar Radiation 1135Kcal/ h/ m2
Seismic (Survival) 0.3g (H), 0.15g (V)
4.5m earth station antenna,3.7m earth station antenna,6.2m satellite antenna,4.5m satellite antenna,6.2m fixed station,4.5m fixed station,3.7m VSAT antenna,3.7m satellite antenna,3.7m RX only antenna,3.7m fixed station,9m earth station antenna,2.4m VSAT antenna,2.4m satellite antenna,2.4m fixed station,7.3m fixed station,16m earth station antenna,3m earth station antenna,11.3m earth station antenna,11m satellite antenna,sng antenna,0n-the-move antenna
Contact person:Jasmine zhang
E-mail:sales@probecom.cn
TEL:0086-29-83115011
FAX:0086-29-83115033
Add:Keji Road, Xi'an, Shaanxi, China
Web: www.probecom.cn
|
|
| » Posted by: Shaanxi probecom microwave technology co,ltd [China] |
|
|
|
|
|
[Sell]
16m earth station antenna |
|
|
Probecom 16m earth station antenna
Intelsat approved antenna&Customized satellite antenna manufacture
Features:
Meets or Exceeds CCIR 580 and INTELSAT Requirements
High G/T, Excellent Pattern Characteristics
Thermal Spaying Zinc Steel Ground Mount Assembly
C-band Antenna Operating in 800MHz Bandwidth Option
2-port, 3-port or 4-port Linear/Circular Feed
Field Changeable Feed System, Switchable Circular to Linear C-band
Antenna Az 0-360deg Continuous Pointing Range
16m C/Ku band earth station antenna specification
ELECTRICAL SPECIFICATION:
Operating Frequency, GHz
C-Band:Rx(3.625-4.2) Tx(5.85-6.425)
Ku-Band:Rx(10.95-12.75) Tx(14.0-14.5)
Polarization: Linear/ Circular
Radiation Pattern:First Sidelobe less than -14, Meet ITU-RS.580-5 and other requirements
MECHANICAL SPECIFICATION:
Azimuth 60 degree (Continuous)
Elevation 0 degree -90 degree (Continuous)
Polarization 180 degree (Continuous)
Finishes Reflector Surface Pedestal & Back Structure Aluminum panels with high-diffusing white paintThermal Spraying Zinc
ENVIRONMENTAL SPECIFICATION:
Operational Wind 72km/h Gusting to 97km/h
Survival Wind 216km/h
Temperature - 40 degree C - + 60 degree C
Relative Humidity 100%
Solar Radiation 1135Kcal/ h/ m2
Seismic (Survival) 0.3g (H), 0.15g (V)
4.5m earth station antenna,3.7m earth station antenna,6.2m satellite antenna,4.5m satellite antenna,6.2m fixed station,4.5m fixed station,3.7m VSAT antenna,3.7m satellite antenna,3.7m RX only antenna,3.7m fixed station,9m earth station antenna,2.4m VSAT antenna,2.4m satellite antenna,2.4m fixed station,7.3m fixed station,16m earth station antenna,3m earth station antenna,11.3m earth station antenna,11m satellite antenna,sng antenna,0n-the-move antenna
Contact person:Jasmine zhang
E-mail:sales@probecom.cn
TEL:0086-29-83115011
FAX:0086-29-83115033
Add:Keji Road, Xi'an, Shaanxi, China
Web: www.probecom.cn
|
|
| » Posted by: Shaanxi probecom microwave technology co,ltd [China] |
|
|
|
|
|
[Sell]
Probecom 13m earth station antennas |
|
|
Probecom 13m earth station antenna
Intelsat approved antenna&Customized satellite antenna manufacture
Features:
Meets or Exceeds CCIR 580 and INTELSAT Requirements
High G/T, Excellent Pattern Characteristics
Thermal Spaying Zinc Steel Ground Mount Assembly
C-band Antenna Operating in 800MHz Bandwidth Option
2-port, 3-port or 4-port Linear/Circular Feed
Field Changeable Feed System, Switchable Circular to Linear C-band
Antenna Az 0-360deg Continuous Pointing Range
13m C/Ku band earth station antenna specification
ELECTRICAL SPECIFICATION:
Operating Frequency, GHz
C-Band:Rx(3.625-4.2) Tx(5.85-6.425)
Ku-Band:Rx(10.95-12.75) Tx(14.0-14.5)
Polarization: Linear/ Circular
Radiation Pattern:First Sidelobe less than -14, Meet ITU-RS.580-5 and other requirements
MECHANICAL SPECIFICATION:
Azimuth 60 degree (Continuous)
Elevation 0 degree -90 degree (Continuous)
Polarization 180 degree (Continuous)
Finishes Reflector Surface Pedestal & Back Structure Aluminum panels with high-diffusing white paintThermal Spraying Zinc
ENVIRONMENTAL SPECIFICATION:
Operational Wind 72km/h Gusting to 97km/h
Survival Wind 216km/h
Temperature - 40 degree C - + 60 degree C
Relative Humidity 100%
Solar Radiation 1135Kcal/ h/ m2
Seismic (Survival) 0.3g (H), 0.15g (V)
4.5m earth station antenna,3.7m earth station antenna,6.2m satellite antenna,4.5m satellite antenna,6.2m fixed station,4.5m fixed station,3.7m VSAT antenna,3.7m satellite antenna,3.7m RX only antenna,3.7m fixed station,9m earth station antenna,2.4m VSAT antenna,2.4m satellite antenna,2.4m fixed station,7.3m fixed station,16m earth station antenna,3m earth station antenna,11.3m earth station antenna,11m satellite antenna,sng antenna,0n-the-move antenna
Contact person:Jasmine zhang
E-mail:sales@probecom.cn
TEL:0086-29-83115011
FAX:0086-29-83115033
Add:Keji Road, Xi'an, Shaanxi, China
Web: www.probecom.cn
|
|
| » Posted by: Shaanxi probecom microwave technology co,ltd [China] |
|
|
|
|
|
[Sell]
Probecom 11.3m earth station antennas |
|
|
Probecom 11.3m earth station antenna
Intelsat approved antenna&Customized satellite antenna manufacture
Features:
Meets or Exceeds CCIR 580 and INTELSAT Requirements
High G/T, Excellent Pattern Characteristics
Thermal Spaying Zinc Steel Ground Mount Assembly
C-band Antenna Operating in 800MHz Bandwidth Option
2-port, 3-port or 4-port Linear/Circular Feed
Field Changeable Feed System, Switchable Circular to Linear C-band
Antenna Az 0-360deg Continuous Pointing Range
11.3m C/Ku band earth station antenna specification
ELECTRICAL SPECIFICATION:
Operating Frequency, GHz
C-Band:Rx(3.625-4.2) Tx(5.85-6.425)
Ku-Band:Rx(10.95-12.75) Tx(14.0-14.5)
Polarization: Linear/ Circular
Radiation Pattern:First Sidelobe less than -14, Meet ITU-RS.580-5 and other requirements
MECHANICAL SPECIFICATION:
Azimuth 60 degree (Continuous)
Elevation 0 degree -90 degree (Continuous)
Polarization 180 degree (Continuous)
Finishes Reflector Surface Pedestal & Back Structure Aluminum panels with high-diffusing white paintThermal Spraying Zinc
ENVIRONMENTAL SPECIFICATION:
Operational Wind 72km/h Gusting to 97km/h
Survival Wind 216km/h
Temperature - 40 degree C - + 60 degree C
Relative Humidity 100%
Solar Radiation 1135Kcal/ h/ m2
Seismic (Survival) 0.3g (H), 0.15g (V)
4.5m earth station antenna,3.7m earth station antenna,6.2m satellite antenna,4.5m satellite antenna,6.2m fixed station,4.5m fixed station,3.7m VSAT antenna,3.7m satellite antenna,3.7m RX only antenna,3.7m fixed station,9m earth station antenna,2.4m VSAT antenna,2.4m satellite antenna,2.4m fixed station,7.3m fixed station,16m earth station antenna,3m earth station antenna,11.3m earth station antenna,11m satellite antenna,sng antenna,0n-the-move antenna
Contact person:Jasmine zhang
E-mail:sales@probecom.cn
TEL:0086-29-83115011
FAX:0086-29-83115033
Add:Keji Road, Xi'an, Shaanxi, China
Web: www.probecom.cn
|
|
| » Posted by: Shaanxi probecom microwave technology co,ltd [China] |
|
|
|
|
|
[Sell]
Probecom 11m earth station antenna |
|
|
Probecom 11m earth station antenna
Intelsat approved antenna&Customized satellite antenna manufacture
Features:
Meets or Exceeds CCIR 580 and INTELSAT Requirements
High G/T, Excellent Pattern Characteristics
Thermal Spaying Zinc Steel Ground Mount Assembly
C-band Antenna Operating in 800MHz Bandwidth Option
2-port, 3-port or 4-port Linear/Circular Feed
Field Changeable Feed System, Switchable Circular to Linear C-band
Antenna Az 0-360deg Continuous Pointing Range
11m C/Ku band earth station antenna specification
ELECTRICAL SPECIFICATION:
Operating Frequency, GHz
C-Band:Rx(3.625-4.2) Tx(5.85-6.425)
Ku-Band:Rx(10.95-12.75) Tx(14.0-14.5)
Polarization: Linear/ Circular
Radiation Pattern:First Sidelobe less than -14, Meet ITU-RS.580-5 and other requirements
MECHANICAL SPECIFICATION:
Azimuth 60 degree (Continuous)
Elevation 0 degree -90 degree (Continuous)
Polarization 180 degree (Continuous)
Finishes Reflector Surface Pedestal & Back Structure Aluminum panels with high-diffusing white paintThermal Spraying Zinc
ENVIRONMENTAL SPECIFICATION:
Operational Wind 72km/h Gusting to 97km/h
Survival Wind 216km/h
Temperature - 40 degree C - + 60 degree C
Relative Humidity 100%
Solar Radiation 1135Kcal/ h/ m2
Seismic (Survival) 0.3g (H), 0.15g (V)
4.5m earth station antenna,3.7m earth station antenna,6.2m satellite antenna,4.5m satellite antenna,6.2m fixed station,4.5m fixed station,3.7m VSAT antenna,3.7m satellite antenna,3.7m RX only antenna,3.7m fixed station,9m earth station antenna,2.4m VSAT antenna,2.4m satellite antenna,2.4m fixed station,7.3m fixed station,16m earth station antenna,3m earth station antenna,11.3m earth station antenna,11m satellite antenna,sng antenna,0n-the-move antenna
Contact person:Jasmine zhang
E-mail:sales@probecom.cn
TEL:0086-29-83115011
FAX:0086-29-83115033
Add:Keji Road, Xi'an, Shaanxi, China
Web: www.probecom.cn
|
|
| » Posted by: Shaanxi probecom microwave technology co,ltd [China] |
|
|
|
|
|
[Sell]
Probecom 9m earth station antenna |
|
|
Probecom 9m earth station antenna
Intelsat approved antenna&Customized satellite antenna manufacture
Features:
Meets or Exceeds CCIR 580 and INTELSAT Requirements
High G/T, Excellent Pattern Characteristics
Thermal Spaying Zinc Steel Ground Mount Assembly
C-band Antenna Operating in 800MHz Bandwidth Option
2-port, 3-port or 4-port Linear/Circular Feed
Field Changeable Feed System, Switchable Circular to Linear C-band
Antenna Az 0-360deg Continuous Pointing Range
9m C/Ku band earth station antenna specification
ELECTRICAL SPECIFICATION:
Operating Frequency, GHz
C-Band:Rx(3.625-4.2) Tx(5.85-6.425)
Ku-Band:Rx(10.95-12.75) Tx(14.0-14.5)
Polarization: Linear/ Circular
Radiation Pattern:First Sidelobe less than -14, Meet ITU-RS.580-5 and other requirements
MECHANICAL SPECIFICATION:
Azimuth 60 degree (Continuous)
Elevation 0 degree -90 degree (Continuous)
Polarization 180 degree (Continuous)
Finishes Reflector Surface Pedestal & Back Structure Aluminum panels with high-diffusing white paintThermal Spraying Zinc
ENVIRONMENTAL SPECIFICATION:
Operational Wind 72km/h Gusting to 97km/h
Survival Wind 216km/h
Temperature - 40 degree C - + 60 degree C
Relative Humidity 100%
Solar Radiation 1135Kcal/ h/ m2
Seismic (Survival) 0.3g (H), 0.15g (V)
4.5m earth station antenna,3.7m earth station antenna,6.2m satellite antenna,4.5m satellite antenna,6.2m fixed station,4.5m fixed station,3.7m VSAT antenna,3.7m satellite antenna,3.7m RX only antenna,3.7m fixed station,9m earth station antenna,2.4m VSAT antenna,2.4m satellite antenna,2.4m fixed station,7.3m fixed station,16m earth station antenna,3m earth station antenna,11.3m earth station antenna,11m satellite antenna,sng antenna,0n-the-move antenna
Contact person:Jasmine zhang
E-mail:sales@probecom.cn
TEL:0086-29-83115011
FAX:0086-29-83115033
Add:Keji Road, Xi'an, Shaanxi, China
Web: www.probecom.cn
|
|
| » Posted by: Shaanxi probecom microwave technology co,ltd [China] |
|
|
|
|
|
[Sell]
Probecom 7.3m earth station antenna |
|
|
Probecom 7.3m earth station antenna
Intelsat approved antenna&Customized satellite antenna manufacture
Features:
Meets or Exceeds CCIR 580 and INTELSAT Requirements
High G/T, Excellent Pattern Characteristics
Thermal Spaying Zinc Steel Ground Mount Assembly
C-band Antenna Operating in 800MHz Bandwidth Option
2-port, 3-port or 4-port Linear/Circular Feed
Field Changeable Feed System, Switchable Circular to Linear C-band
Antenna Az 0-360deg Continuous Pointing Range
7.3m C/Ku band earth station antenna specification
ELECTRICAL SPECIFICATION:
Operating Frequency, GHz
C-Band:Rx(3.625-4.2) Tx(5.85-6.425)
Ku-Band:Rx(10.95-12.75) Tx(14.0-14.5)
Polarization: Linear/ Circular
Radiation Pattern:First Sidelobe less than -14, Meet ITU-RS.580-5 and other requirements
MECHANICAL SPECIFICATION:
Azimuth 60 degree (Continuous)
Elevation 0 degree -90 degree (Continuous)
Polarization 180 degree (Continuous)
Finishes Reflector Surface Pedestal & Back Structure Aluminum panels with high-diffusing white paintThermal Spraying Zinc
ENVIRONMENTAL SPECIFICATION:
Operational Wind 72km/h Gusting to 97km/h
Survival Wind 216km/h
Temperature - 40 degree C - + 60 degree C
Relative Humidity 100%
Solar Radiation 1135Kcal/ h/ m2
Seismic (Survival) 0.3g (H), 0.15g (V)
4.5m earth station antenna,3.7m earth station antenna,6.2m satellite antenna,4.5m satellite antenna,6.2m fixed station,4.5m fixed station,3.7m VSAT antenna,3.7m satellite antenna,3.7m RX only antenna,3.7m fixed station,9m earth station antenna,2.4m VSAT antenna,2.4m satellite antenna,2.4m fixed station,7.3m fixed station,16m earth station antenna,3m earth station antenna,11.3m earth station antenna,11m satellite antenna,sng antenna,0n-the-move antenna
Contact person:Jasmine zhang
E-mail:sales@probecom.cn
TEL:0086-29-83115011
FAX:0086-29-83115033
Add:Keji Road, Xi'an, Shaanxi, China
Web: www.probecom.cn
|
|
| » Posted by: Shaanxi probecom microwave technology co,ltd [China] |
|
|
|
|
|
[Sell]
Probecom 6.2m c/ku band earth station antenna |
|
|
Probecom 6.2m earth station antenna
Intelsat approved antenna&Customized satellite antenna manufacture
Features:
Meets or Exceeds CCIR 580 and INTELSAT Requirements
High G/T, Excellent Pattern Characteristics
Thermal Spaying Zinc Steel Ground Mount Assembly
C-band Antenna Operating in 800MHz Bandwidth Option
2-port, 3-port or 4-port Linear/Circular Feed
Field Changeable Feed System, Switchable Circular to Linear C-band
Antenna Az 0-360deg Continuous Pointing Range
6.2m C/Ku band earth station antenna specification
ELECTRICAL SPECIFICATION:
Operating Frequency, GHz
C-Band:Rx(3.625-4.2) Tx(5.85-6.425)
Ku-Band:Rx(10.95-12.75) Tx(14.0-14.5)
Polarization: Linear/ Circular
Radiation Pattern:First Sidelobe less than -14, Meet ITU-RS.580-5 and other requirements
MECHANICAL SPECIFICATION:
Azimuth 60 degree (Continuous)
Elevation 0 degree -90 degree (Continuous)
Polarization 180 degree (Continuous)
Finishes Reflector Surface Pedestal & Back Structure Aluminum panels with high-diffusing white paintThermal Spraying Zinc
ENVIRONMENTAL SPECIFICATION:
Operational Wind 72km/h Gusting to 97km/h
Survival Wind 216km/h
Temperature - 40 degree C - + 60 degree C
Relative Humidity 100%
Solar Radiation 1135Kcal/ h/ m2
Seismic (Survival) 0.3g (H), 0.15g (V)
4.5m earth station antenna,3.7m earth station antenna,6.2m satellite antenna,4.5m satellite antenna,6.2m fixed station,4.5m fixed station,3.7m VSAT antenna,3.7m satellite antenna,3.7m RX only antenna,3.7m fixed station,9m earth station antenna,2.4m VSAT antenna,2.4m satellite antenna,2.4m fixed station,7.3m fixed station,16m earth station antenna,3m earth station antenna,11.3m earth station antenna,11m satellite antenna,sng antenna,0n-the-move antenna
Contact person:Jasmine zhang
E-mail:sales@probecom.cn
TEL:0086-29-83115011
FAX:0086-29-83115033
Add:Keji Road, Xi'an, Shaanxi, China
Web: www.probecom.cn
|
|
| » Posted by: Shaanxi probecom microwave technology co,ltd [China] |
|
|
|
|
|
[Sell]
Probecom 4.5m earth station antenna,c/ku band antennas |
|
|
Probecom 4.5m earth station antenna
Intelsat approved antenna&Customized satellite antenna manufacture
Features:
Meets or Exceeds CCIR 580 and INTELSAT Requirements
High G/T, Excellent Pattern Characteristics
Thermal Spaying Zinc Steel Ground Mount Assembly
C-band Antenna Operating in 800MHz Bandwidth Option
2-port, 3-port or 4-port Linear/Circular Feed
Field Changeable Feed System, Switchable Circular to Linear C-band
Antenna Az 0-360deg Continuous Pointing Range
4.5m C/Ku band earth station antenna specification
ELECTRICAL SPECIFICATION:
Operating Frequency, GHz
C-Band:Rx(3.625-4.2) Tx(5.85-6.425)
Ku-Band:Rx(10.95-12.75) Tx(14.0-14.5)
Polarization: Linear/ Circular
Radiation Pattern:First Sidelobe less than -14, Meet ITU-RS.580-5 and other requirements
MECHANICAL SPECIFICATION:
Azimuth 60 degree (Continuous)
Elevation 0 degree -90 degree (Continuous)
Polarization 180 degree (Continuous)
Finishes Reflector Surface Pedestal & Back Structure Aluminum panels with high-diffusing white paintThermal Spraying Zinc
ENVIRONMENTAL SPECIFICATION:
Operational Wind 72km/h Gusting to 97km/h
Survival Wind 216km/h
Temperature - 40 degree C - + 60 degree C
Relative Humidity 100%
Solar Radiation 1135Kcal/ h/ m2
Seismic (Survival) 0.3g (H), 0.15g (V)
4.5m earth station antenna,3.7m earth station antenna,6.2m satellite antenna,4.5m satellite antenna,6.2m fixed station,4.5m fixed station,3.7m VSAT antenna,3.7m satellite antenna,3.7m RX only antenna,3.7m fixed station,9m earth station antenna,2.4m VSAT antenna,2.4m satellite antenna,2.4m fixed station,7.3m fixed station,16m earth station antenna,3m earth station antenna,11.3m earth station antenna,11m satellite antenna,sng antenna,0n-the-move antenna
Contact person:Jasmine zhang
E-mail:sales@probecom.cn
TEL:0086-29-83115011
FAX:0086-29-83115033
Add:Keji Road, Xi'an, Shaanxi, China
Web: www.probecom.cn
|
|
| » Posted by: Shaanxi probecom microwave technology co,ltd [China] |
|
|
|
|
|
[Sell]
2x2 Optical Switch |
|
|
2x2 Optical Switch
anfiber.com,Anfiber company supply 2x2 Optical Switch, as a professional optical device manufacturer , high quality and low price 2x2 Optical Switch in Shenzhen,China
anfiber.com-2x2 Optical Switch, which is famous for its high performance, low insertion loss and compact dimension : (L)28.5x(W)12.5x(H)8.5(SM); (L)27.0x(W)12.6x(H)8.0(MM).It is an ideal Component for OADM，OXC，system monitor and protection. With compact package, it could be easy to integrate into a high density optical communication system.
2x2 Optical Switch Applications
Configurable OADM
Metropolitan Area Network
System Monitoring
Component Testing
R&D in Laboratory
2x2 Optical Switch Features
Low Insertion Loss
Wide Wavelength Range
Low Crosstalk
High Stability, High Reliability
Latching and Non-latching
Epoxy-free on Optical Path
2x2 singlemode Optical Switch Parameters:
Wavelength Range nm 1260~1650
Operating Wavelength nm 1310/1490/1550/1625/1650
Insertion Loss dB Typ:0.8 Max:1.0
Return Loss dB ≥50
Crosstalk dB ≥55
PDL dB ≤0.05
WDL dB ≤0.25
TDL dB ≤0.25
Repeatability dB ≤±0.02
Power Supply v 3.0 or 5.0
Lifetime times ≥107
Switch Time ms ≤8
Transmission Power mW ≤500
Operating Temperature ℃ -5～+70
Storage Temperature ℃ -40～+85
Weight g 16
Dimension mm (L)28.5×(W)12.6×(H)8.5(±0.2mm) Customization is available
2x2 multimode Optical Switch Parameters:
Wavelength Range nm 670～980 1260～1650
Operating Wavelength nm 670/785/850/980 1310/1490/1550/1625/1650
Insertion Loss dB Typ:0.8 Max:1.2 Typ:0.8 Max:1.0
Return Loss dB ≥30
Crosstalk dB ≥45
PDL dB ≤0.05
WDL dB ≤0.25
TDL dB ≤0.25
Repeatability dB ≤±0.02
Power Supply v 3.0 or 5.0
Lifetime times ≥107
Switch Time ms ≤8
Transmission Power mW ≤500
Operating Temperature ℃ -5～+70
Storage Temperature ℃ -40～+85
Weight g 16
Dimension mm (L)27.0×(W)12.6×(H)8.0(±0.2mm) customization is available
The above is 2x2 Optical Switch,manufacturer provides straightly 2x2 Optical Switch partial information, if you have any question for 2x2 Optical Switch of the price, manufacturers, model, pictures, please contact us for 2x2 Optical Switch of the latest information.
|
|
| » Posted by: www anfiber com [China] |
|
|
|
|
|
[Sell]
2x4 optical switch |
|
|
2x4 optical switch
anfiber.com,Anfiber company supply 2x4 optical switch, as a professional optical device manufacturer , high quality and low price 2x4 optical switch in Shenzhen,China.
Anfiber.com-2x4 optical switch is famous for its small volume , reliable performance, simple control mode. It is an ideal Component for OADM，OXC，system monitor and protection. With compact package, it could be easy to integrate into a high density optical communication system.
2x4 optical switch Features
Wide Wavelength Range
Low Crosstalk
High Stability, High Reliability
Unique Patent: non-glue in optical route
Simple control
2x4 optical switch Applications
Optical route switch
System Monitor
R&D in Laboratory
Configurable OADM
2x4 optical switch Parameters
Wavelength Range nm 1310 or 1490 or 1550 (SM)1310 & 1490 & 1550 (SM)850 or 1310(MM)
Insertion Loss dB Typ:1.5 Max:1.8 Typ:1.8 Max:2.0 Typ:1.8 Max:2.0
PDL dB ≤0.05
Return loss dB SM≥50 MM≥30
WDL dB ≤0.25
Crosstalk dB SM≥55 MM≥35
Repeatability dB ≤±0.02
Drive Voltage v 5.0
Lifetime time ≥107
Switch Time ms ≤8
Transmission Power mW ≤500
Operation Temperature ℃ -20~+70
Storage Temperature ℃ -40~+85
Dimension mm (L)95×(W)76×(H)15
The above is 2x4 optical switch,manufacturer provides straightly 2x4 optical switch partial information, if you have any question for 2x4 optical switch of the price, manufacturers, model, pictures, please contact us for2x4 optical switch of the latest information.
|
|
| » Posted by: www anfiber com [China] |
|
|
|
|
|
[Sell]
2x2 Optical Bypass Switch |
|
|
2x2 Optical Bypass Switch
anfiber.com,Anfiber company supply 2x2 Optical Bypass Switch, as a professional optical device manufacturer , high quality and low price 2x2 Optical Bypass Switch in Shenzhen,China
anfiber.com-2x2 Optical Bypass Switch, which is famous for its high performance, low insertion loss and compact dimension. It is an ideal Component for OADM，OXC，system monitor and protection. With compact package, it can be easy to integrate into a high density optical communication system.
2x2 Optical Bypass Switch Features:
Low Insertion Loss
Wide Wavelength Range
Low Crosstalk
High Stability and High Reliability
Epoxy-free on Optical Path
Latching and Non-latching
2x2 Optical Bypass Switch Applications:
OADM
MAN
System monitor
Component testing
Parameters: 2x2 Optical Bypass Switch
Wavelength Range nm 1260～1625
Operating Wavelength nm 1310/1550
Insertion Loss dB Typ:0.8 Max:1.0
Return Loss dB ≥50
Crosstalk dB ≥60
PDL dB ≤0.05
WDL dB ≤0.25
TDL dB ≤0.25
Repeatability dB ≤±0.02
Power Supply v 3.0 or 5.0
Lifetime times ≥107
Switch Time ms ≤8
Transmission Power mW ≤500
Operating Temperature ℃ -20～+70
Storage Temperature ℃ -40～+85
Weight g 25
Dimension mm (L)55x(W)30x(H)12.8(±0.1～0.2mm) customization is available.
The above is 2x2 Optical Bypass Switch,manufacturer provides straightly 2x2 Optical Bypass Switch partial information, if you have any question for 2x2 Optical Bypass Switch of the price, manufacturers, model, pictures, please contact us for 2x2 Optical Bypass Switch of the latest information. |
|
| » Posted by: www anfiber com [China] |
|
|
|
|
|
[Sell]
1x10 1x12 Optical Switch |
|
|
anfiber.com,Anfiber company supply 1x10 1x12 Optical Switch, as a professional optical device manufacturer in the world, high quality and low price 1x10 1x12 Optical Switch in Shenzhen,China.
Anfiber.com-1x10 1x12 Optical Switch is a kind of device ,with the ability of optical route switch. In optic fiber transmission system, it is used for optical route controlling, LAN, light source / detector changing, and protecting the change of Ethernet etc. In optical fiber test system, it is used for optical fiber and optical fiber device testing, network testing, open-air optical cable testing and optical fiber sensing.
1x10 1x12 Optical Switch Features
More Than 128Channels
Low Loss and High Reliability
Parallel Interface (TTL)
Modularized Design
Epoxy-free on Optical Path
1x10 1x12 Optical Switch Applications
Remote Monitoring in Optical Network
Testing of Fiber, Optical Component
1x10 1x12 Optical Switch series:
1x8 Optical Switch 1x10 Optical Switch 1x12 Optical Switch 1x16 Optical Switch 1x24 Optical Switch 1x32 Optical Switch 1x64 Optical Switch 1x128 Optical Switch
1x10 1x12 Optical Switch Parameters
Insertion Loss dB 1<N≤12 16<N≤32 32<N≤64 64<N≤128
Typ:0.6 Max:0.8 Typ:0.8 Max:1.0 Typ:1.2 Max:1.5 Typ:1.7 Max:2.0
Wavelength Range nm 532~980（MM） 532~980（SM） 1260~1620(MM）1260~1620（SM）
Operating Wavelength nm 650/780/850/980 650/780/850/980 1310/1490/1550/1625
1310/1490/1550/1625
Return Loss dB SM≥50、MM≥30
Crosstalk dB SM≥55、MM≥35
PDL dB ≤0.05
WDL dB ≤0.25
TDL dB ≤0.25
Repeatability dB ≤±0.02
Lifetime times 107
Transmission Power mW mW ≤500
Switch Time ms ≤10
Operating Temperature C -20～+70
Storage Temperature C -40～+85
Power Supply V +5 or 12
Dimension mm 1<N≤4 (135×40×32) 4<N≤12 (135×64×32)12<N≤16(184×78×36)16<N≤32(184×78×66) 32<N<88 (184×156×66) 88≤N≤128(184×220×66)
The above is 1x10 1x12 Optical Switch,manufacturer provides straightly 1x10 1x12 Optical Switch partial information, if you have any question for 1x10 1x12 Optical Switch of the price, manufacturers, model, pictures, please contact us for 1x10 1x12 Optical Switch of the latest information.
|
|
| » Posted by: www anfiber com [China] |
|
|
|
|
|
[Sell]
1x4 Optical Switch |
|
|
1x4 Optical Switch
anfiber.com,Anfiber company supply 1x4 Optical Switch, as a professional optical device manufacturer in the world, high quality and low price 1x4 Optical Switch in Shenzhen,China.
Anfiber-1x4 Optical Switch, which is famous for its high performance, compact dimension and simple control type. It is an ideal Component for OADM，OXC，system monitor and protection. With compact dimension, it could be easy to integrate into a high density optical communication system.
1x4 Optical Switch Features:
Wide Wavelength Range
Low Crosstalk
High Stability, High Reliability
Epoxy-free on optical path
Latching and Non-latching
1x4 Optical Switch Applications:
Switching in Optical
System Monitor
R&D in Laboratory
Configurable OADM
1x4 Optical Switch Parameters:
Wavelength Range nm 1310 or 1490 or 1550 (SM) 1310 & 1490 & 1550 (SM) 850 or 1310(MM)
Insertion Loss (1x4) dB Typ:1.0 Max:1.2 Typ:1.2 Max:1.5 Typ:1.2 Max:1.5
Insertion Loss (1x8) dB Typ:1.5 Max:1.8 Typ:1.8 Max:2.0 Typ:1.8 Max:2.0
Insertion Loss (1x16) dB Typ:2.0 Max:2.4 Typ:2.4 Max:2.6 Typ:2.4 Max:2.6
PDL dB ≤0.05
Return Loss dB SM≥50 MM≥30
WDL dB ≤0.25
Crosstalk dB SM≥55 MM≥35
Repeatability dB ≤±0.02
Power Supply v 5.0
Lifetime times ≥107
Switch Time ms ≤8
Transmission Power mW ≤500
Operating Temperature ℃ -20~+70
Storage Temperature ℃ -40~+85
Dimension mm 1<N≤4 (135×40×32) 4<N≤12 (135×64×32)12<N≤16(184×78×36) 16<N≤32(184×78×66) 32<N<88 (184×156×66) 88≤N≤128(184×220×66)
The above is 1x4 Optical Switch,manufacturer provides straightly 1x4 Optical Switch partial information, if you have any question for1x4 Optical Switch of the price, manufacturers, model, pictures, please contact us for 1x4 Optical Switch of the latest information.
|
|
| » Posted by: www anfiber com [China] |
|
|
|
|
|
[Sell]
1x2 Optical Switch |
|
|
1x2 Optical Switch
anfiber.com,Anfiber company supply 1x2 Optical Switch, as a professional optical device manufacturer in Shenzhen,China, high quality and low price 1x2 Optical Switch.
anfiber-1x2 optical switches, which is famous for its high performance, low insertion loss and compact dimension :(L) 27.0X(W) 12.6X(H) 8.0. It is an ideal Component for OADM，OXC，system monitoring and protection. With compact package, it can be easy to integrate into a high density optical communication system.
1x2 optical switches Features
Low Insertion Loss
Wide Wavelength Range
Low Crosstalk
High Stability, High Reliability
Epoxy-free on Optical Path
Latching and Non-latching
1x2 optical switches Applications
Metropolitan Area Network
R&D in Laboratory
System Monitor
Configurable OADM
1x2 optical switches Parameters:
Wavelength Range nm 670~980 1260~1650
Operating Wavelength nm 670/785/850/980 1310/1490/1550/1625/1650
Insertion Loss dB Typ:0.8 Max:1.2 Typ:0.5 Max:0.8
Return Loss dB MM<30 SM>50
Crosstalk dB MM≥30 SM≥55
PDL dB ≤0.05
WDL dB ≤0.25
TDL dB ≤0.25
Repeatability dB ≤±0.02
Power supply v 3.0 or 5.0
Lifetime times ≥107
Switch Time ms ≤8
Transmission Power mW ≤500
Operating Temperature ℃ -20~+70
Storage Temperature ℃ -40~+85
Weight g 16
Dimension mm (L)27.0X(W)12.6X(H)8.0(±0.2mm) Customization is available.
The above is 1x2 optical switches,manufacturer provides straightly 1x2 optical switches partial information, if you have any question for 1x2 optical switches of the price, manufacturers, model, pictures, please contact us for 1x2 optical switches of the latest information.
|
|
| » Posted by: www anfiber com [China] |
|
|
|
|
|
[Sell]
1x2 fiber optical Switch |
|
|
1x2 fiber optical Switch
anfiber.com,Anfiber company supply 1x2 fiber optical Switch, as a professional optical device manufacturer in Shenzhen,China, high quality and low price 1x2 fiber optical Switch.
Anfiber.com-1x2 fiber optical Switch, which is famous for its high performance, low insertion loss and compact dimension :(L) 22.5X(W) 11.8X(H) 10.2. It is an ideal Component for OADM，OXC，system monitoring and protection. With compact package, it can be easy to integrate into a high density optical communication system.
1x2 fiber optical Switch Features
Low Insertion Loss
Wide Wavelength Range
Low Crosstalk
High Stability, High Reliability
Epoxy-free on Optical Path
Latching and Non-latching
1x2 fiber optical Switch Applications
R&D in Laboratory
System Monitoring
OADM
MAN
1x2 fiber optical Switch Parameters
Wavelength Range nm 670~980 1260~1650
OperatingWavelength nm 670/785/850/980 1310/1490/1550/1625/1650
Insertion Loss dB Typ:0.8 Max:1.2 Typ:0.8 Max:1..0
Return Loss dB MM≥30 SM≥50
Crosstalk dB MM≥35 SM≥55
PDL dB ≤0.05
WDL dB ≤0.25
TDL dB ≤0.25
Repeatability dB ≤±0.02
Power supply v 3.0 or 5.0
Lifetime ≥107
Switch Time ms ≤8
Transmission Power mW ≤500
OperatingTemperature ℃ -20~+70
Storage Temperature ℃ -40~+85
Weight g 16
Dimension mm L 22.5XW 11.8XH 10.2 ±0.2
The above is 1x2 fiber optical Switch,manufacturer provides straightly 1x2 fiber optical Switch partial information, if you have any question for 1x2 fiber optical Switch of the price, manufacturers, model, pictures, please contact us for 1x2 fiber optical Switch of the latest information.
|
|
| » Posted by: www anfiber com [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 next»
|
|
|
