|
|
|
|
|
[Sell]
Methyl p-methoxycinnamate |
|
|
Methyl p-methoxycinnamate Assay: 98%min CAS No.: 832-01-9 Output: Made-to-Order Appearance: white crystal solid MF: C11H12O3= 192 Usage: a natural sunscreen, UV absorption, widely used in all kinds of flavors, a kind of edible flavor |
|
» Posted by: Hubei Yuancheng Pharmaceutical Co., Ltd [China] |
|
|
|
|
|
[Sell]
Beta-bromostyrene |
|
|
Beta-bromostyrene CAS NO.: 103-64-0 Molecular Formula:C8H7Br Molecular Weight: 183.05 Appearance: Light yellow liquid Fragrance: Unique Scent Purity: 98%min Boiling point: 219-220 Degree C Refractive index (20 Degree C ): 1.604-1.608 Specific gravity (20 Degree C ): 1.422-1.426 Packing: 200kg/plastic drum |
|
» Posted by: Hubei Yuancheng Pharmaceutical Co., Ltd [China] |
|
|
|
|
|
[Sell]
CVG-200 Canners Vacuum Gauge |
|
|
the Canneed "CVG-100 and CVG-200 Canner's Vacuum Gauge", Used to measure the vacuum pressure of seamed cans. The gauge is placed on top of the can and the piercing needle is forced through the top of the can. The rubber collar forms a temporary seal to allow for measurement. CVG-100 is designed for using near the product line, Consists of a 0 to 76cm Hg vacuum gauge, pierce point, and rubber collar. Also available with dual scale to measure pressure to 15 psi. CVG-200 is designed for using in lab, Consists of a holder, a 0 to 76cm Hg vacuum gauge, pierce point, and rubber collar. Also available with dual scale to measure pressure to 15 psi. Technical data (Changes reserved): Vacuum range : 0-0.1 Mpa; (0-15 Psi; 0-76 cmHg) Resolution: 0.005 Mpa Accuracy: +/-2.5%
|
|
» Posted by: Canneed Instrument (HK) Limited [China] |
|
|
|
|
|
[Sell]
CAN-7001 CO2 Tester and Pressure Tester |
|
|
The “CAN-7001 CO2 tester and Pressure Tester “is used to measure the CO2 content in carbonated beverages filled in glass and PET bottles and cans. Once the bottle or can is placed in the tester, the handle is pulled forward and the sample is pierced consecutively. The pressure is read on the pressure gauge, as soon as the equilibrium pressure is achieved. With a dial thermometer install with model CAN-7001-T, the temperature of the liquid is read at the same time. With model CAN-7001, the bottle or can may then be removed from the instrument to measure the temperature of the liquid with a separate thermometer. The CO2 content is determined by means of the CO2 slide rule or temperature/pressure relationship charts. Technical data (Changes reserved): Press: Measuring range : 0-0.6Mpa Resolution : 0.01 Mpa. Temperature: Measuring range : 0-50℃ Resolution : 0.1℃ Sample capacity : Height: min. 50mm, max. 330mm Bottle diameter: Max. 90mm Dimensions : 200 x 130 x 400 mm (W x D x H) Net Weight : 2 kg For air determinations the IAM Air Meter can be combined with CAN-7001 or CAN-7001-T. • Determination of air content in the headspace volume, • Determination of total air content in the beverage.
|
|
» Posted by: Canneed Instrument (HK) Limited [China] |
|
|
|
|
|
[Sell]
SST-2 Secure Seal Tester For Bottle And Lid |
|
|
The “Canneed SST-2 Secure Seal Tester “is used to test seal integrity on the glass or plastic containers and cans. The SST-2 has been designed to address the special needs of sealing cans and bottles that use aluminum roll-on, twist crowns, or plastic caps. The SST-2 operates with compressed air, nitrogen, or carbon dioxide. By detecting gas leakage, rather than liquid, the Secure Seal Tester gives more sensitive, accurate readings. SST-2 is constructed from anodized aluminum, stainless steel, and plastic materials. The tester's rugged construction withstands production line abuse, yet is accurate enough for laboratory use. Technical data: Measurement range : 0-16 bar (1.6 Mpa) Pneumatic supply : Max. 16 bar (1.6 Mpa) Sample capacity : 330 mm height × 150 mm dia. max. Dimensions : 320 x 380 x 720 mm (W x D x H) Net Weight : 15 kg
|
|
» Posted by: Canneed Instrument (HK) Limited [China] |
|
|
|
|
|
[Sell]
IDG-100 Can Internal Diameter Gauge |
|
|
IDG-100, IDG-200 & IDG-300 Can Internal Diameter Gauge This unit serves for quickly checking the Internal Diameter of can. It is supply with a calibration piece. IDG-100 is for small diameter cans, Cans dia. 52-100 mm (only measure one type can), If equipped with the data processor, it can be auto calculate to achieve the actual internal diameter of the 2-piece cans, and avoid the measurement deviation caused by the "ellipse effect". IDG-200 is for large diameter cans, Cans dia. :80-260 mm (only measure one type can) IDG-300 is compatible for two (2) or three (3) sizes of cans. One type cans must equip with one calibration pieces and one set of measure blocks (change parts). If you must measure several type cans, you can order several pcs of IDG-100 or IDG-200. Or you can order several psc of calibration pieces and several sets of measure blocks. Technical data: Resolution : 0.01 mm
|
|
» Posted by: Canneed Instrument (HK) Limited [China] |
|
|
|
|
|
[Sell]
AXL-4000 Axial Load Tester |
|
|
The “CanNeed AXL-4000 Axial Load Tester” measures the axial force resistance of beverage cans in Newton. The can is placed in a support and gradually forced upwards against the pressure plate. The space between the support and the top plate can be altered with spacers. The can crashes after the peak force has been applied that the can is capable of resisting. The maximum value can now be read in the display 1)Industry Standard 2)Exceptionally Parallel Platens 3)Auto record and display the peak force value 4)Touch-screen PLC Controlled 5)Stable pressing process, data collected automatically by the microcomputer controlling system 6)Pressure plate auto reset after the test is finished. Convenience for placing / taking out the samples. 7)Display the max. and min. measuring value and average after several test. 8)Applicable for samples of different dimension. 9)Mechanical Overload Protection Configuration: AXL-4000 Axial Load Tester already included the 330ml fitting insert. Optional: 500ml fitting insert. AXL-CAL Calibration Cell For Axial Load Tester. Technical data: Measure range : 3000 N Resolution : 1N Rear Panel : RS232 Power supply : 240VAC 50-60Hz Dimensions : 500 mm x 400 mm x 600 mm (W x D x H ) Weight : 50 kg
|
|
» Posted by: Canneed Instrument (HK) Limited [China] |
|
|
|
|
|
[Sell]
CBT-100 Buckle Tester Bottom for Can |
|
|
The "Canneed CBT-100 Buckle Tester Bottom for Cans" determines the exact pressure at which the can bottom begins to buckle respectively the dome reverses. The empty flanged can or straight wall can is placed in the holder. After covering the device with a plexiglass hood pressure is applied. The can is sealed with a rubber o-ring structure. Fast pressure increase up to 5 bar (programmable to just bellow the expected buckle value), from there the „speed of pressure increase“ may be set within the device. The test is terminated as soon as the can buckles. The maximum pressure value is shown in the display. Any can of varying diameter and height may be tested: inserts are available that can be exchanged within seconds. Feature: *Industry Standard * suit empty flanged can and straight wall can *Program Logic Control System (PLC) Controlled *LCD touch-screen Display *Rs-232 Communications Capability * Overload Protection *Test Point For Calibration *"speed of pressure increase"may be set *display the max. and min. measuring value and average after several test. Technical data (changes reserved): Measure range: 0-900 Kpa Resolution: 1 Kpa Rear Panel: RS232 serial output Power supply: 115/230V/50...60Hz Pneumatic supply: 10bar Dimensions: 600 x 450 x 430 (W x D x H ) Weight: 40 kg
|
|
» Posted by: Canneed Instrument (HK) Limited [China] |
|
|
|
|
|
[Sell]
ELT-100 Leak Tester for ends |
|
|
The Canneed Leak Tester for End ELT-100 is designed for 2 ends. The end is sealed in the compound area and Pressure is applied. Leaking spots are made visible by revealing bubbles in the water bath. Each end diameter or shape requires specially adjusted holders, which can be exchanged easily. Technical data: (changes reserved) Pressured air supply: 6 bar min. Max. test pressure: Ø 50 mm: 6 bar, Ø 83 mm: 3 bar, Ø 99 mm: 2 bar Dimensions: 400 x 600 x 220 mm Weight: approx. 32 kg Water overflow bath size: 10 L
|
|
» Posted by: Canneed Instrument (HK) Limited [China] |
|
|
|
|
|
[Sell]
ACH-100 Aerosol Curl Height Gauge |
|
|
The Canneed ACH-100 Aerosol Curl Height Gauge is used for measuring the contact height of the curl 1" aperture of aerosol cans. ACH-100 is the Industry Standard. The gauge is first calibrated by setting the calibration ring on the gauge. In this case the dial has to indicate the value of 4.25 mm. The measurement on the can is then inserting the gauge up to the shank into the can and then slowly releasing the button. Technical data: Measure range: 0-10mm Resolution: 0.01mm
|
|
» Posted by: Canneed Instrument (HK) Limited [China] |
|
|
|
|
|
[Sell]
CLT-600 Leak Tester for can |
|
|
The canneed"CLT-600 Leak Tester for can" is used for checking the permeability of 3-piece cans in a water bath. The can is fixed to magnet disc plate and submerged into the water. At the same time it is subjected to pressure and leaks are revealed by air bubbles. End and side seams visible. A special parallel clamping system enables to measure different diameters and heights with one device. The clamping pressure and the test pressure may be set independantly. The operator determines the period of time the cans are under water. If he switches the by-pass lever and presses the two button valves, the cans deaerate and are lifted out of the water. The whole test cycle is automated and is pneumatically controlled by pressure regulator valves. Technical data (changes reserved): Maximum test pressure: 4 bar Max. diameter: 130 mm Max. can height: 300 mm Bath dimensions: 1500 x 600 x 500 mm (W x D x H) Dimensions: 1500 x 800 x 800 mm(W x D x H) Weight: 200 kg
|
|
» Posted by: Canneed Instrument (HK) Limited [China] |
|
|
|
|
|
[Sell]
DER-4 Digital Enamel Rater |
|
|
DER-4 Digital Enamel Rater The CanNeed DER-4 Digital Enamel Rater is able to detect the exposed metal position more easily compare to the former models. The reformative electronic design makes it more sensitive, reliable and accurate. The anticorrosion characteristic of the enhanced can body support is ensured its durability. The film coated buttons are more durable and with better corrosion resistance. DER-4 is the industry standard. The new CanNeed Enamel Rater DER-4 instrument test the coverage of the enamel coating inside food and beverage cans, aerosol-cans and also different kinds of ends. It displays an index of the amount of metal exposed by incomplete enamel coverage on a clear, easily read digital LED. The instrument applies a constant voltage across the can body and an electrode immersed in an electrolyte-filled can, and measures the resulting current. Test voltage is set at 6.3 VDC. Operating range is 0 to 500 milliamperes with accurate resolution within 0.1ma. The instrument operates in industry standard 4 second mode, continuously, or can be programmed to measure any desired time. In 4-second mode, the display shows the reading only at 4 seconds. In continuous mode the reading is displayed beside elapsed time with the 4-second reading automatically stored in memory for recall. A simple and foolproof calibration self-test verifies correct, accurate operation. Location of exposed metal can be determined by reversing voltage which causes bubbles of gas to form on exposed metal for easy visual identification. Electrolyte level and can contact sensors ensure that testing begins only when can is properly filled with electrolyte solution and good electrical contact with the can has been established. The sturdy enclosure includes a sealed-membrane keypad for protection against moisture and corrosion in the factory environment. An RS232 serial interface permits use with remote computers, printers or data collectors. The CanNeed End Panel Holder can be used with any CanNeed Enamel Rater to test for metal exposure on can ends. The test is performed in the same manner as on a can. Electrolyte is added to the plastic cup, the can end is fitted onto the beveled end of the cup, and a vacuum is applied to hold the end securely on the cup. When the cup is inverted, the electrode and can end become immersed in the electrolyte and the reading is displayed on the Enamel Rater. The CanNeed End Panel Holder consists of a lucite cup mounted to rotate on its horizontal axis. The cup is beveled to make a tight seal on the can end. An electrode and vacuum connection are mounted within the cup. On the bakelite base a vacuum stopcock and a moveable contact arm, which completes the electrical circuit when the assembly is inverted. A cable adaptor footswitch is required to connect a CANNEED End Panel Holder to the CANNEED Digital Enamel Rater. Technical Specifications (changes reserved): Sample type : 2- and 3-piece cans, aerosol-cans and different kinds of ends Range : 0 to 500 ma Resolution : 0.1mA Accuracy : ± 5% Power supply : AC115 V/230V to DC9V Rear Panel : RS232 serial output Display unit Dimensions : 162 x 200 x 80mm ( W x L x H ) Can holder Dimensions : 210 x 228 x 250 mm (W x L x H) Weight : 4 kg
|
|
» Posted by: Canneed Instrument (HK) Limited [China] |
|
|
|
|
|
[Sell]
CSS-100B Anti-noise seam saw |
|
|
CSS-100B Anti-noise seam saw The saw is provided with an anti-noise design and a special guide for 2- and 3-piece cans (65 mm dia.). Special seam circular saw with double cut for can double seam inspections. The CSS 100B was specially designed for 2- and 3-piece cans. The nitrated blades achieve together with the speed of approx. 1.000 r/min. a very plain cut surface. The seam image on VSM 6A Automatic Seam Computer (Video Seam Monitors), and automatic seam measuring systems gets thereby very clear and improves measurement speed and reliability. Technical data (changes reserved): Sample can dia. : 65mm Sample type : 2- and 3-piece cans. Saw blades: 80 x 22 x 0,5 mm , Speed: approx. 1.000 r/min. Power supply: 230 V; also available with 115 V motor Dimensions: L380×W240×H200mm Weight : 12kg
|
|
» Posted by: Canneed Instrument (HK) Limited [China] |
|
|
|
|
|
[Sell]
Seam Sight(TM) Full Automatic Seam Monitor |
|
|
The Seam SightTM Full Automatic Seam Monitor is a compact measuring system for quick and accurate automatic seam measurements and storing of seam images. The seam is positioned manually in front of the camera and is digitised by the computer. In less than 1 second the Seam SightTM software offers a measurement. The seam length, body hook, end hook, actual overlap, percentage overlap; seam gap, seam thickness and body hook butting% are measured. At the end of the measurement an evaluated seam appears including dimension lines and measured values. This may be stored in computer or printed out on a laserprinter. The values can be stored in a Excel file and are displayed in on-screen if values are within specs. Feature: 1. In less than 1 second the Seam SightTM software offers a measurement. 2. With the Golden LensTM get very clear Seam image 3. Data can be stored in a Excel file! 4. Measured values are displayed in on-screen and alarm if values are not within specs! 5. Seam image can be printed, stored! 6. Calibration function 7. LED Illumination 8. SPC function to collect the data of Mitutoyo micrometer. Seam SightTM Full Automatic Seam Monitor consisting of: * Seam Monitor * Seam SightTM Software * Calibration piece 2mm Optional: *Digital Seam Thickness Guage *Digital Countersink Guage *Interface to Seam SightTM Seam SightTM Full Automatic Seam Measuring System If the Seam SightTM Full Automatic Seam Monitor combine with the Digital Seam Thickness Guage, Digital Countersink Guage and Interface, it is a Seam SightTM Full Automatic Seam Measuring System. Technical data (changes reserved): Power supply: 115 / 230V Accuracy: +/- 0.005 mm Languages: English / Chinese Cans dia. :52-200 mm, custom made up to 300mm Dimensions: 400 X 200 X 150 mm(W X D X H) Weight: 5 kg
|
|
» Posted by: Canneed Instrument (HK) Limited [China] |
|
|
|
|
|
[Sell]
Biluochun tea |
|
|
Biluochun is also a well-known variety of green tea,produced in Dongting Mountain near the Taihu Lake in Jiangsu Wu County.has more than a thousand years of history .The taste is clean and fresh,with the facters of heavy buds ,fresh fragrant,heavy taste .has the unique nature tea and fruit fragrant . tight and heavy strip, as well as good tip; deep green and considerate pekoe; a few of tender stalk; fresh, strong and lasting aroma; fresh, mellow and sweet after taste; pure green and bright soup color; soft, even, tender green and bright leaf base. Features of superfine |
|
» Posted by: Huikangtang BeiJing Scientific Academy of Traditional Chinese Medicine [China] |
|
|
|
|
|
[Sell]
quit smoking tea |
|
|
Chinese caterpillar fungus can invigorating lung and kidney ,hemostasis apophlegmatic ,Lucid Ganoderma has the function of strengthening healthy qi .improving immunity,ginseng has the function great nourishment of renal qi ,body fluid regeneration and firm the from ,calm the nerves ,Pearl can anticancer ,antiaging ,prevent chronic pharyngitis .lily has the functions of nourishing Yin and moisturizing lung .easing mental anxiety;removing cardiopyrexia for tranquilization .Ansu Apricot Seed has the functions of depressing qi ,expelling phlegm,relieving cough and asthma .main dingredients Chinese Caterpillar Fungus ,lucid ganoderma,ginseng ,pearls ,lily ,ansu apricot seed |
|
» Posted by: Huikangtang BeiJing Scientific Academy of Traditional Chinese Medicine [China] |
|
|
|
|
|
[Sell]
Puer tea |
|
|
It originates in Puer Yunnan ,is a kind of dark tea .Pu'er Tea is a general term, in the bulk or pressed form, the sun-greened Yunnan grandifoliate species tea in Puer Prefecture as its raw material and fermented up to the local standard of Yunnan Province.The good Puer Tea is red-brown(the color of pig liver), with the special aged-aroma.it's different from the other tea it's More old more valuable,it will be more value along with the time . |
|
» Posted by: Huikangtang BeiJing Scientific Academy of Traditional Chinese Medicine [China] |
|
|
|
|
|
[Sell]
Tieguanyin |
|
|
anxi anxi tieguanyin tea is introduced the acura, entering the China tea 10 name and world top 10 tea by columns, China geographic indication protected origin, and won the Chinese well-known trademark, in just the "China expo was held in the first ten famous teas". Its long, full-bodied sweet high charm, pleasant delicacy, well-known character extraordinary. Tieguanyin colour and lustre, DaiLu shaped like pearls, shang golden, excessive edible is crisp, aroma, known as the "green leaves loftiness red edge, seven bubble have lingering fragrance" laudatory name. Through scientific analysis and practice has proved, tieguanyin contains high amino acids, vitamins, minerals, tea polyphenol, alkaloids, a variety of nutrition and efficacy composition, famous, best-selling Hong Kong, Macao, Taiwan, southeast Asia, Japan, Europe and America etc, love by consumer. Surprisingly mingyuan anxi mountains, please jun tasting tea.It between in green tea and black tea,belong to semi-fermented tea.Named after the bodhisattva Avalokitesvara (known in Chinese as Guan Yin), it has also been translated as "Iron Goddess of Mercy" (more correctly, "Compassion") after the old translation for Guan Yin's name. it has good efect to some difficult disease except the basis healthy funtions of tea ,it can be as the subsidiary product to diabetic ,lose weight ,beauty ,protect dental decay ,clearing heat and down fire ,anti-smoking and sober you up. 1, tieguanyin tea polyphenol compounds can prevent excessive oxidation, delay senescence. 2 the vitamin C, tieguanyin tea and vitamin E can prevent carcinogens. Three, tieguanyin tea of tea polyphenols compounds and vitamins can resist arteriosclerosis. 4, can reduce and control diabetes, can make blood sugar, diabetes reduced. 5, reduce weight didnt, fall hematic fat, triglyceride and cholesterol. 6, tieguanyin tea about the fluoride 40% ~ 80% dissolved in water, the calcium combined with extremely easily with teeth. 7, heat fall fire, good. 8, tieguanyin refreshing the caffeine PE thoughts, excited central nervous, enhance thinking, improve efficiency. |
|
» Posted by: Huikangtang BeiJing Scientific Academy of Traditional Chinese Medicine [China] |
|
|
|
|
|
[Sell]
Hygetropin HGH |
|
|
Supply Authentic Hygetropin, 8 iu per vial, 25 vials per kit, 1 kit 200 iu. we are making door to door shipping service and assured term of shipment. we dropship the orders from eu, the usa, hk, china. any interests, pls contact us high quality,cheap price,fast shipping, 100% safe shipping guaranteed Brand new & Sealed as can be seen in the photo. Characteristics of Hygetropin The volume exclusion high efficiency liquid chromatography analysis indicated that the purity of the batched final products of Hygetropin is 99.9% which greatly surpasses the purities of domestic known related products. |
|
» Posted by: WUYI DATIAN DEYOU FACOTRY [China] |
|
|
|
|
|
[Sell]
Ulva latuca |
|
|
Origin: Vietnam High quality and competitive price We can supply all kinds of Seaweed such as: Ulva lactuca, Sargassum, E. Cottonii, etc. For more information please contact rosyATsovimexcoDOTcom Thanks and best regards, Rosy (Ms) |
|
» Posted by: Sovimex Co. , Ltd [Viet Nam] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 next»
|
|