|
|
|
|
|
|
[Sell]
Sand Crusher/Sand Maker/Sand Making Machinery |
|
|
This sand production line has features of high automation, low operating costs, high crushing ratio, low energy consumption, large output, convenient maintenance, uniform granularity and good shape of the products, reasonable gradation, and the produced sand conforms to the national standard of construction sand. The whole line is highly automatic with low operation cost, high crushing ratio, low power consumption, high capacity, low pollution and easy maintenance. The size of the finished product is even and in good shape, which meets the national sand-making standards. From this page, you can get the Ball Mill,Lime Kiln,Sand Making Machinery,Sand Maker,Ceramic Ball Mill,Ball Mill. if you are interested in our products,please contact us by E-mail or telphone, thank you. http://www.rawmill.com http://www.ksmachines.com/Rod-Mill.htm http://www.ksmachines.com/Stone-Washer.htm |
|
» Posted by: Henan King State Heavy Industrial Machinery Co., Ltd. [China] |
|
|
|
|
|
[Sell]
QT6-15 Automatic Hollow Block Making Machine/Cement Brick Machine |
|
|
QT6-15 Automatic Hollow Block Production Line Features: 1. Easy to operate and maintain with PLC control 2. Perfect design, stable and reliable quality and high production output 3. Auto stacking system promote higher efficiency 4. Machine, electricity, hydraulic are all combined together and controlled by PLC to protects running with safety 5. Vibrating by hydraulic-pressure motor, two manipulators controlled by oil cylinder raise up feeding and vibrating efficiency Introduction: 1. Special material storing system: It can move forward and backward, easy to clean the material adding hopper. The integrative design can ensure the accuracy of material supply, so the blocks/bricks can have the same density. 2. Special material feeding system: It adopts advanced vibrating technology, with the help of the material-feeding bar, the material can be instantaneously spread evenly and meet the requirement of being quick but even. 3. Integrated oil system: It adopts the model of international standard. The system has the specialties of long lifespan, good weather resistance and low energy consumption. Importing important components is another guarantee of good quality. 4. Intellectualized PLC control system: It has a Human-Machine Interface --the operator can totally control the machine without any training. It can also automatically operate, analyze compaction, adjust material feeding and diagnose the malfunction. It is easy and safe to use. QT6-15 Technology Data Outside size 3400*2000*2800( mm) Weight 9000KG Rated pressure 21MP Vibration frequency 50HZ,3000-4000r/min Pallet size 695*560*15(mm) Power 45kw Standard brick 32pcs/mould 240*115*51mm 61440pcs/8hours Multi-hole brick 16pcs/mould 240*115*90mm 30720pcs/8hours Hollow brick 6pcs/mould 390*190*190mm 11520pcs/8hours
|
|
» Posted by: Haiyan Huagong Machinery Co., Ltd [China] |
|
|
|
|
|
[Sell]
GRP FITTING |
|
|
Zhongyi FRP Co., Ltd manufactures filament wound pipe, pipe fittings and flanges of different diameter in accordance with standards published by ASTM, ANSI, AWWA, ASME . Pipe, pipe fittings and flanges are manufactured from corrosion resistant epoxy vinyl ester, polyester, isophthalic resins. Pipes & ducts Pipes & ducts are manufactured using the "Dual helix" filament winding process on computer controlled machines. By adjusting the relative speed of mandrel rotation and glass distribution head movement, helical reinforced layers with different angles can be wound. In order to increase the pipe stiffness, especially on large diameter pipes, silica sand can be added to parallel layers of wall. Nominal diameter Nominal size of pipe and fitting is based on internal diameter. The range of available sizes is 25 to 3000 mm. Nominal pressure classes: Pipes and fittings are classified according to nominal pressure. Standard pressure classes are 4, 6, 10, 16, 20 and 25 bars. Intermediate or higher-pressure classes are considered on request or depending on the design parameters and conditions Nominal lengths Pipes have a length of six meters up to ND150 and 12 meters for bigger diameters. Fittings A wide range of fittings as elbows, reducers, tees, caps, flanges etc. is available. Fittings are manufactured by the hand lay-up, contact molding and spray-up process. In hand lay-up and contact molding processes veil and alternate layers of mat and woven roving saturated with resin are applied on the mold. In spray-up process continuous strand roving is fed through a chopper gun, combined with catalyzed resin, and sprayed onto the mould surface Prefabrication spools Prefabricated spools save installation time as well as costs, freeing the designer from being limited to standard fittings and allowing junction sizes shapes to be specified and manufactured as a better alternative to a complex series of joints.
|
|
» Posted by: ZHONGYI FRP CO.,LTD. [China] |
|
|
|
|
|
[Sell]
Unbonded PC Strand, Construction 1 x 7 and Diameter: 7.94mm-17.80mm. |
|
|
1.Unbonded PC strand are mainly used for prestressed steel structure, a variety of rail and road bridges, factory plant, high-rise building, prestressed construction and a variety of building foundation columns and the transformation of reinforcement, the city's overpass, Shell safety of nuclear power stations, television tower, water towers, concrete silo, sewage treatment, anchoring the rock, water conservancy and hydropower project, the standard pre-stressed concrete structures, poles, water pipes, crane beam, the level of large plates, hollow Floor, and so on. 2.Unbonded PC strand is widely used for construction including Earth Anchor, rock anchor, PC bridge, retaining wall and dam, building slab, etc, ?Unbonded PC is mainly used in U-Turn anchors. In order to avoid environmental problems and public resentment, steel wire and strands can be removed after construction. U-Turn anchors also are used as permanent anchors. ?Earth Anchor is also named temporary construction anchor or soil anchor. It can prevent collapsing of surrounding soil before completion of buildings. Soil anchor will be removed after building completes. ?Rock anchor also named permanent anchor can as reinforcement of sloped surface, and it can prevent buoyancy of a building. The PC strand in rock anchor is permanently buried in the ground. ?Buoyancy Anchor Used to prevent buoyancy of a building during preparation of foundation.
|
|
» Posted by: Ledning PC Wire Factory [China] |
|
|
|
|
|
[Sell]
sell High Quality Geonet |
|
|
HuaAn's Geonet is a biaxial/ biplanar geonet manufactured from high quality high density polyethylene resin. The rib formation of Huaan Geonet allows for high flow in both machine and cross machine directions. With thicknesses ranging from 200 mil to 300 mil Huaan geonet is designed to meet all the needs of transmitting fluids in high load applications such as landfill cells and low load transmission of fluid for drainage and methane gases in landfill closure applications. Manufactured with high density polyethylene resin the material exhibits chemical resistance equal to our HDPE Geomembrane materials. Huaan's geonets are UV stabilized. Applications include: Landfill cells, leak location in double lined systems, landfill caps for both drainage and methane gas collection and landscape drainage systems. CE111 CE121 CE131 CE131B CE141 CE151 CE152 Roll Width (m) 2.5 2.5 2.5 2.0 2.0 2.5 1.25(double layer) Mesh (mm) (8×6)±2 (8×6)±2 (27×27)±3 (22×22)±3 (60×60)±5 (74×74)±5 (74×74)±5 Thickness (mm) 2.9 3.3 5.2 4.8 7.1 5.9 5.9 The biggest tensile strength≥ (KN/m) 2.0 7.68 5.80 6.40 6.50 4.82 4.82 Deformation to peak load ≤ (%) 41.0 20.2 16.5 18.6 12 23.2 23.2 Load to 10% of deformation ≥ (KN/m) 1.32 6.80 5.20 5.74 6.0 3.83 3.83 Deformation to 5% of peak load ≤(%) 6.10 3.20 3.70 3.50 3.20 4.40 4.40 Remark The special specification can be made as contract or agreement. |
|
» Posted by: Hebei HuaAn Geogrid Co., Ltd. [China] |
|
|
|
|
|
[Sell]
sell High Quality Geocell |
|
|
Geocell is consisted in high intensity HDPE wide ribs, shaped in reticulation after welding hard. It has retractile performance, can be folded when transport, and fill stone material or concrete when extend it, formed a whole solid structure. It act as under lay, increase the bearing strength of groundwork, also can be used in slope as protecting framework. GS-250 GS-200 GS-150 GS-100 GS-75 GS-50 Height (mm) 250 200 150 100 75 50 Welding Distance (mm) 400 Rib Thickness (mm) 1±0.05 Weight (mm) 3310±200 2648±200 1986±200 1324±200 993±200 62±200 Combining Power of Welding Spot (N) 2560 2050 1460 1023 864 560 Remark: The special specification can be made as contract or agreement. |
|
» Posted by: Hebei HuaAn Geogrid Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Steel - plastic Composite Geogrid |
|
|
Huaan steel-plastic composite geogrid is made by steel-plastic reinforced belt with new technologies. Due to regular coarse vein of light on the surface of the product formed by prolonging and compression, it endures high tensile strength and frictional and resistance between filled earths, comprehensively prohibits the shearing of foundation soil, lateral extrusion and uplifting. The great rigidity of reinforced earth cushion will facilitate the dispersion Uniformly transmission of upper foundation load to lower soft soil layer, and thus improves the bearing capacity of the foundation. The reinforced soil cushion increases the integral rigidity of the foundation in the scope of compressed layer, and facilitates the adjustment of foundation deformation |
|
» Posted by: Hebei HuaAn Geogrid Co., Ltd. [China] |
|
|
|
|
|
[Sell]
sell Quality Plastic Welding Grid |
|
|
Plastic Welding grill is the company based on market demand, self-developed high-strength geogrid. Plastic welding geogrid is a polypropylene-based material, by adding anti-aging agent and other additives, by extrusion stretching into the rough surface of refined embossing of high-strength rib to rib by plane at right angles, by ultrasonic welding made its point of intersection. Applicable to reinforced earth retaining wall abutments, steep slopes, soft-based projects such as the reinforcement, reinforcement. Color of the product according to customer requirements. Technical characteristics of products: 1, high intensity; 2, bending folding, good anti-fatigue, anti-corrosion, continuous rolling; 3, and the role of soil friction force Yin large, wide application scope, it is suitable for high-load engineering use. 4, the construction steel grille is more than safe, easy to scratch the workers. The company's products a single ribs intensity range 2.5-20KN, adjustable mesh size range 50-150mm, intensity per square meter range from 50-400KN. |
|
» Posted by: Hebei HuaAn Geogrid Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Supply High Quality Geogrid Reinforcing |
|
|
Geogrids are flexible, synthetic meshes which are manufactured specifically for slope stabilization and earth retention. Grids are available in a variety of materials, sizes and strengths. They can be made of high tensile strength plastics or woven polyester yarns, and are typically packaged at the factory in rolls. The grids are rated by Long-Term Allowable Design Strength (LTADS) with values ranging from 500 to 3,000 pounds per linear foot (7.3N/m to 43.8N/m). These products are flexible, very durable, and have long-term design strength. Geogrid reinforcing is designed to be used in conjunction with retaining wall block and soil to stabilize the mass behind the wall. Geogrid reinforcing should be used (or may even be required) for reinforcing segmental retaining walls whenever the retaining walls are higher than 3', the retaining wall slopes, there are surcharges (any downward pressures imposed above the retaining wall level, such as parking areas, etc.), the retaining walls are created by moving soil to create additional usable space, or the retaining walls are being used to hold back soil around swimming pools. See Installing Geogrid Reinforcing for detailed installation instructions. Geogrid Reinforcing Applications Base courses for road, railway, and airport construction Construction of access roads and transportation links Retaining structures and very steep banks Slope stabilization Noise-protection embankments Contaminated land reclamation Piled embankments Landfill construction Bridging of hollows and sink holes |
|
» Posted by: Hebei HuaAn Geogrid Co., Ltd. [China] |
|
|
|
|
|
[Sell]
sell Quality Curves with Geogrid |
|
|
Inside Curves Geogrid needs to have 100% coverage around an inside curve. To achieve this, additional layers need to be installed either above or below the course where the grid is required to fill voids that are created. Cut geogrid to required lengths per the approved plan. Lay out the primary geogrid around the curve butting front edges together. Make sure strength direction runs perpendicular to wall face. Mark the blocks or take note of the areas where there are voids in the grid placement. Place the filler piece of grid on the next course (or the course below) to cover the void left on the primary layer. Outside Curves Cut geogrid to required lengths per the approved plans. Lay out the geogrid around the curve. Lift the section of grid that overlaps and place the fill material to separate. Grid layers need to be separated by a 3 in. (75 mm) layer of approved fill material. Never compact directly on the geogrid. |
|
» Posted by: Hebei HuaAn Geogrid Co., Ltd. [China] |
|
|
|
|
|
[Sell]
sell Quality PET Geogrid |
|
|
Terylene geogrid is a new material for reinforce road base, it made by terylene filament, and covered by special solution. High longitudinal and horizontal strength, low elongation rate, anti-alkali and aging resistance. Specification Tensile Strength KN/M longitude        latitude Percentage Elongation ≤ % Covering Rate ≥ % DJG100×120 100 120 20 20 DJG100×100 100 100 20 20 DJG80×80 80 80 20 20 DJG80×50 80 50 20 20 DJG50×50 50 50 20 20 DJG50×35 50 35 20 20 DJG40×40 40 40 20 20 DJG30×30 30 30 20 20 DJG20×20 20 20 20 20 DJG100 100 10 20 20 DJG80 80 10 20 20 DJG50 50 10 20 20 DJG40 40 10 20 20 |
|
» Posted by: Hebei HuaAn Geogrid Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Supply Black Mesh Debris Netting |
|
|
Black 3/16" single 2'X2' mesh nylon rope netting, UV protected, Tested to 17,500 pounds. Comes with 5/8" poly-pro rope border. Custom made to your size. Complete system available with all hardware to meet your specific requirements.
|
|
» Posted by: Anping KenJoy Debris Netting Inc [China] |
|
|
|
|
|
[Sell]
supply Various Colors of Plastic Netting |
|
|
Plastic mesh is made through thermal spraying and cold solidifying. It offers the features of wear-resistance, anti-corrosion, flexibility and it can be used in replacement of metal wire. Color: Black, white, red, green, yellow, blue, etc. Features: Plastic mesh is known as universal mesh, made with high-density polyethylene as raw material, refined by adding other additives. It enjoys corrosion resistance, light weight, long life, non-toxic, tasteless and good transparency. - Manufactured from PE. U.V stabilized with the rectangular mesh type, oval mesh type and diamond mesh type. - Re-usable - Usually packed in rolls in plastic film or bags with labels inside, and loosely loaded into the container - Can be manufactured in any height from 1.0m to 1.8m - Many different mesh sizes and roll sizes are available for these products. We can also produce other sizes as per customers' requirements.
|
|
» Posted by: Anping KenJoy Debris Netting Inc [China] |
|
|
|
|
|
[Sell]
Sell The size is 50x2m Scaffold Netting |
|
|
50 x 2m. Durable woven HDPE (High Density Polyethelyne) netting for the containment of falling debris. Scaffold Sheeting is used for covering scaffolding structures. Scaffold Sheeting has many purposes. 1. Scaffold Sheeting Enhances the security for the workers on the scaffolding. 2. Serves as a climate shield to protects workers, machinery and open constructions against rain, wind, snow etc. 3. Ensures a stable working climate on the scaffold so deadlines can be achieved regardless of the weather. 4. Protects the surroundings from any building dust or other building waste.
|
|
» Posted by: Anping KenJoy Debris Netting Inc [China] |
|
|
|
|
|
[Sell]
Sell Quality Construction Safety Netting |
|
|
Construction safety netting include vertical debris netting and horizontal debris netting. Vertical Wire Mesh for Construction Safety: In the construction of buildings, vertical wire mesh for safety is used to circle the building site, in order to prevent the construction materials or workers to fall down from higher places. Applications of Vertical Wire Mesh for Construction Safety: To prevent the people or articles from falling down, or to avoid possible harms caused by falling articles and to protect the workers in high places and the passing pedestrians, also to keep the site clean. Features: Vertical wire mesh for construction safety enjoys several features. First, this vertical wire mesh for construction has finer opening to 2000 opening per 100 square centimeter compared to common vertical safety wire mesh (max. 800 opening per 100 square centimeter). So it can prevent articles with bottom area under 100 square centimeter and offers better safety features. Secondly, our vertical wire mesh for construction safety is knitted with very special method. Firm knots, uniform openings and sizes. It is firm, tough, durable and economic. Thirdly, this products offers good air permeability, can be closed for working and keep the constructional site nice and clean.
|
|
» Posted by: Anping KenJoy Debris Netting Inc [China] |
|
|
|
|
|
[Sell]
supply High Quality Safety Netting |
|
|
Material: Fiber glass wire Weaving: Plain weaving Characteristics: this kind of product is high intensity, good paste, clothing stickers, and excellent positioning. Application: Widely used in self-adhesives fiberglass drywall joint tape, strengthening mesh for stone, fiberglass mesh cloth, through years of efforts, our research and development on various fiberglass mesh products has achieved a great success. It is an ideal material for the construction industry
|
|
» Posted by: Anping KenJoy Debris Netting Inc [China] |
|
|
|
|
|
[Sell]
supply Various Uses Horizontal Debris Netting |
|
|
In the construction of buildings, vertical wire mesh for safety is used to prevent the construction materials to fall down from higher places to hurt the workers in lower places. Applications of Horizontal Debris Netting: It is used in construction, installation, work high above ground, power station, ship, water construction and various working sites. Features: Our horizontal wire mesh for construction safety offers high strength, good elasticity, easy installation, non-pollution. It is environmental-friendly, soft, anti-aging, corrosion resistant, worm resistant, cold resistant, etc
|
|
» Posted by: Anping KenJoy Debris Netting Inc [China] |
|
|
|
|
|
[Sell]
supply High Tensile Vertical Debris Netting |
|
|
In the construction of buildings, vertical wire mesh for safety is used to circle the building site, in order to prevent the construction materials or workers to fall down from higher places. Applications of Construction Debris Netting: To prevent the people or articles from falling down, or to avoid possible harms caused by falling articles and to protect the workers in high places and the passing pedestrians, also to keep the site clean. Features: Vertical wire mesh for construction safety enjoys several features. First, this vertical wire mesh for construction has finer opening to 2000 opening per 100 square centimeter compared to common vertical safety wire mesh (max. 800 opening per 100 square centimeter). So it can prevent articles with bottom area under 100 square centimeter and offers better safety features. Secondly, our vertical wire mesh for construction safety is knitted with very special method. Firm knots, uniform openings and sizes. It is firm, tough, durable and economic. Thirdly, this products offers good air permeability, can be closed for working and keep the constructional site nice and clean.
|
|
» Posted by: Anping KenJoy Debris Netting Inc [China] |
|
|
|
|
|
[Sell]
Sell Quality Construction Debris Netting |
|
|
Construction Debris Netting is an application of debris netting. It is manufactured by high density polyethylene monofilaments. New improved webbing with extra reinforcement, and eyelets at close intervals of 10cm Ideal for indoor and outdoor application.
|
|
» Posted by: Anping KenJoy Debris Netting Inc [China] |
|
|
|
|
|
[Sell]
supply Length is 50-100m Debris Net |
|
|
Debris net, a kind of scaffolding netting, is manufactured from high density polyethylene monofilaments. Debris nets serve mainly for construction safety, mainly vertical debris netting and horizontal debris netting with different designs and loading capacities. Specifications Material: knitted knotless virgin HDPE. Length: 50m-100m or as required. Width: 2m-10m or as required. Weight:100g-300g / square meters or as required. Contains reinforced edges at side and middle. Easy to install, Economic and secure solution. Treated with UV: ensure the nets keep long lifespan. Applications * Scaffolding Enclosures and Safety Netting * Wind Protection or Paint Over spray * Temporary Walls and Dust Control * Sandblast Containment or Fence Line Highlights * Knitted Debris Fabric * Available in 50%, 70% and 90% * Installs Easily & Easy to Handle * Can be hung Vertically or Horizontally * Open weave allows air movement * Flame Retardant & Non-Flame Available * Can be purchased in yellow, green, blue, black or white * Roll Goods, Custom Fabrication |
|
» Posted by: Anping KenJoy Debris Netting Inc [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 next»
|
|
|