|
|
|
|
|
[Sell]
Pit Furnace |
 |
|
| Welcome to visit jtfurnace dot com. Pit furnaces have been in use for a long time with industry and commercial heat treaters. mainly for steel parts,especially the shaft parts of normalizing, annealing, quenching,Oxidation etc. heat treatment. When the technology needs, may pass into the protective gas to reduce oxidation of components. Heat Treatment applications at temperature up to 1100 degree. advantages: 1. Heating elements are evenly distributed in the furnace chamber, the layout is reasonable. 2. Cover lifting by the manual mechanism or hydraulic device to complete, easy to operate. 3. The temperature control uses the PID automatic control power, smooth temperature control. Detailed product specifications, please visit our website. |
|
» Posted by: Foshan Jutong Industrial Furnace Co., Ltd [China]  |
|
|
|
|
|
[Sell]
Box Furnace |
|
|
| Welcome to visit jtfurnace dot com. Box Furnace is period operating furnace, mainly for steel parts,alloy steel parts, Austenitic stainless steel parts of normalizing, annealing, quenching etc. heat treatment. When the technology needs, may pass into the protective gas to reduce oxidation of components. Advantages: 1. Heating elements are evenly distributed in the furnace chamber, the layout is reasonable. 2. After protective atmosphere annealing, the product non-oxidation, eliminates the machining stress. 3. Door clamping device to improve the furnace sealing to prevent leakage of furnace gas. 4. The temperature control uses the PID automatic control power, smooth temperature control. Detailed product specifications, please visit our website. |
|
| » Posted by: Foshan Jutong Industrial Furnace Co., Ltd [China] |
|
|
|
|
|
[Sell]
Trolley Furnace |
|
|
| Welcome to visit jtfurnace dot com. Trolley Furnace is period operating furnace, mainly for large alloy steel, Austenitic stainless steel or other steel parts of normalizing, annealing, quenching etc. heat treatment, high-manganese steel water toughness processing. Advantages: 1. Heating elements are distributed in the furnace chamber, the layout is reasonable. 2. Trolley's turnover, the door opens shuts is by the electric motor through the worm gear, the worm bearing adjuster and the chain drive realizes. 3. With door and trolley and heater chain protection, safe and reliable. 4. The temperature control uses the PID automatic control power, smooth temperature control. Detailed product specifications, please visit our website. |
|
| » Posted by: Foshan Jutong Industrial Furnace Co., Ltd [China] |
|
|
|
|
|
[Sell]
LG30-H cold rolling mill 1015 |
|
|
| LG30-H cold rolling mill Technical parameter of product 1.outer diameter of rough tube:22-48mm 2.wall thickness of rough tube:2-5mm 3.length of rough tube:less than 7000mm 4.diameter of finished products :16-32mm 5.wall thickness of finished products:1.2-3.0mm Technical parameter of machine 1.diameter of roller:260 mm 2.round trip length of operating frame:603mm 3.round trip frequency of operating frame:80-120 times/minute 4.feeding amount:3-12mm (double feeding) 5.swing angle of rough tube:54-37 degree(double turning) 6.material loading method:End loading 7.continuous rolling:No 8.rolling lines:single 9.Power of main motor:DC motor 55KW |
|
| » Posted by: Kunshan Yongdeli Machinery Co.,Ltd [China] |
|
|
|
|
|
[Sell]
China Manufacturer of Solar Water Heater |
|
|
| This product Qty. of solar tubes 20pcs Diameter of solar tube 70mm Length of solar tube 1.7M Qty. of solar tubes 30pcs 1) Metal-glass evacuated tubes with Heat pipe provide 10% higher efficiency solar collection than normal all-Glass tubes 2) Able to be used in all climates 3) Copper Heat pipes for rapid heat transfer 4) Easy plug-in installation for mounting on the roof or at ground level 5) Maintenance free 6) Suitable for mains pressure water (up to 8bar / 116psi) 7) Corrosion resistant silver brazed copper header 8) Frame material: 304 2B grade standard steel 9) Casing material: 304 2B stainless steel 10) Excellent insulator in glass wool 11) Collectors may be connected in series to increase water heating capacity 12) Tubes easily replaced if broken - can be used with broken tubes 13) Ideal for commercial solar water heating applications |
|
| » Posted by: ChangZhou Nature Solar Energy Co.,LTD. [China] |
|
|
|
|
|
[Sell]
cold rolling mill2 1015 |
|
|
| LG40-H cold rolling mill Technical parameter of product 1.outer diameter of rough tube:32-62mm 2.wall thickness of rough tube:2-6mm 3.length of rough tube:less than7000mm 4.outer diameter of finished products:25-42mm 5.wall thickness of finished products:1.2-4mm Technical parameter of machine 1.diameter of roller:280 mm 2.round trip length of operating frame:822mm 3.round trip frequency of operating frame:75-105 times/minute 4.feeding amount:3-12mm(double feeding) 5.swing angle of rough tube:54-37 degree(double turning) 6.material loading method:End loading 7.continuous rolling:No 8.rolling lines :single 9.Power of main motor:DC motor 75KW |
|
| » Posted by: Kunshan Yongdeli Machinery Co.,Ltd [China] |
|
|
|
|
|
[Sell]
Furnace Muffle |
|
|
| Welcome to visit jtfurnace dot com. Furance Mulffle is the vulnerable Part of bright annealing line or protective atmosphere furnace. Our company provides customized products Detailed product specifications, please visit our website. |
|
| » Posted by: Foshan Jutong Industrial Furnace Co., Ltd [China] |
|
|
|
|
|
[Sell]
Crucible Furnace |
|
|
| Welcome to visit jtfurnace dot com. Crucible Furnace is suitable for aluminum, zinc, copper melting and holding, especially for supporting die casting machine, also use as the zinc alloy dregs material recovery furnace. Optional heating method: electricity, gas, fuel oil. Advantages: 1.Superior product performance, reliability, durability 2.With imported burner, high efficiency, fast melting 3.Furnace temperature and aluminum liquid temperature precise controllable, the aluminum liquid quality is highest, the aluminum loss by burning rate is lowest. 4.May choose the cast iron or the graphite crucible, is equipped with leakage protective device. 5.Selects the fuel gas heating to install the flue-gas recuperation, conserves energy. 6.Easy to maintain and cleaning residue, clean environment, environment emissions target and the energy efficiency target surpass the country and the European and American standard. Detailed product specifications, please visit our website. |
|
| » Posted by: Foshan Jutong Industrial Furnace Co., Ltd [China] |
|
|
|
|
|
[Sell]
Drying Oven |
|
|
| Welcome to visit jtfurnace dot com. Drying Oven is mainly used in industrial and mining enterprises and scientific research institutions of the baking, drying, low temperature sintering, heat treatment and other heating purposes, are widely used in electronics, machinery, electroplating, food, light industry. Advantages: 1. Heating elements are evenly distributed in the furnace chamber, the layout is reasonable. 2. With hot air circulation system that allows the temperature uniformity. 3. Lightweight structure, easy to move. 4. The temperature control uses the PID automatic control power, smooth temperature control. Detailed product specifications, please visit our website. |
|
| » Posted by: Foshan Jutong Industrial Furnace Co., Ltd [China] |
|
|
|
|
|
[Sell]
Solar water heaters with long holding time |
|
|
| We passed the ISO9001:2000 and the CE identification. Thermosyphon Tubular solar water heater 1) Reliable and efficient with twin-glass solar tubes. 2) Easy plug-in installation. 3) Outer tank material: colour steel-plate. 4) Reliable and efficient with twin-glass solar tubes. 5) Easy plug-in installation. 6) Outer tank material: powder coated color steel sheet. 7) Inner tank material: 0.4mm thick SUS304 food grade stainless steel plate. 8) Frame material: color steel. 9) Superior heat preservation ensured by 50 - 65mm polyurethane foam insulation laye. |
|
| » Posted by: ChangZhou Nature Solar Energy Co.,LTD. [China] |
|
|
|
|
|
[Sell]
Bright Annealing Line For Stainless Steel |
|
|
| Welcome to visit jtfurnace dot com. Bright Annealing Line For Stainless Steel is used for the process of martensitic stainless steel bright quenching, austenitic stainless steel bright annealing (solution), and for continuous production of each kind of copper material and the copper alloy middle recrystallization annealing, final annealing, Destressing annealing and so on. Advantages: 1.Absorption of foreign advanced technology, optimizing the structure design. 2.Intelligent control stable highly effective, even hardness, stable organization. 3.Energy saving and high thermal efficiency, Uses safely and conveniently. 4.Simple operation, non-industrial pollution. 5.Advanced, reliable, practical and economical. Detailed product specifications, please visit our website jtfurnace com. |
|
| » Posted by: Foshan Jutong Industrial Furnace Co., Ltd [China] |
|
|
|
|
|
[Sell]
Mesh Belt Conveyor Furnace |
|
|
| Welcome to visit jtfurnace dot com. Mesh Belt Conveyor Furnace is for continuous carburizing quenching. Advantages: 1.Absorption of foreign advanced technology, optimizing the structure design. large capacity, easy maintenance. 2.Equipped with mixing fans. In the furnace the temperature atmosphere is even. 3.The atmosphere controls stably, the processing product organization is stable 4.Underneath the furnace side is equipped with the clear slag notch. 5.With emission and waste heat recovery agencies before the furnace. 6.Oil tank with the cold heat exchanger and filter, can control the oil temperature and ensure clean. 7.Washing machine is equipped with the oil-water separator and the strong dry winds system. 8.Tempering furnace heating elements have upper and lower sub-row design layout, with the mixing fans. 9.Products with low residual austenite, hardness uniform, bright and clean surface. Detailed product specifications, please visit our website jtfurnace com. |
|
| » Posted by: Foshan Jutong Industrial Furnace Co., Ltd [China] |
|
|
|
|
|
[Sell]
ICEMAN ICE MACHINE COMPANY-Making best quality,clean and eatable ice for your business |
|
|
| 1. The 6M series include various types of equipment from 6M-100 to 6M-100F. Output of flake ice varies from 1 to 10 tons /day and the thicknesses of ice from 1 to 1.5mm. It's dry and loosen. 2. The flake ice can be put into the gap of products and reduce the exchange with external air, and keep low temperature to keep the freshness of frozen products. 3. Via adjusting the density of seawater, we can set up the temperature of ice. The density of natural seawater can be altered from 3.3% to1.1%. 4. This type of equipment can produce ice directly from seawater during sailing so that ensure the freshness of aquatic food. 5. The evaporated cylinder of seawater flake ice machine is made of aluminum alloy with plate surface of "TUFRAM". It can be used for long-time due to high efficiency and corrosion resistance. |
|
| » Posted by: Qingdao Iceman Ice Machine Company [China] |
|
|
|
|
|
[Sell]
Long life of solar water heaters |
|
|
| means outside the tank diameter 470 1, the liner material is stainless steel , a steel tank and frame color. 2.Heat tank insulation by polu yurethane foam, the thickness of 55 mm. 3.Silicon connection and sealing rings. 4, pipe and support adjustable, power bearing in general, and to ensure the tube using a long time. 5.Whole glass vacuum ultra hardborax and slilica glass. Resist 25mm hail, the service life can last 15 years. If you are using electrical heating assistance, turn off the power when taking a bath, and supple. |
|
| » Posted by: ChangZhou Nature Solar Energy Co.,LTD. [China] |
|
|
|
|
|
[Sell]
Annealing Furnace For Knife And Fork |
|
|
| Wlecome to visit jtfurnace dot com. Continuous Bright Annealing Furnace is used for the process of martensitic stainless steel bright quenching, austenitic stainless steel bright annealing (solution), and for continuous production of each kind of copper material and the copper alloy middle recrystallization annealing, final annealing, Destressing annealing and so on. Advantages: 1.Absorption of foreign advanced technology, optimizing the structure design. 2.Intelligent control stable highly effective, even hardness, stable organization. 3.Energy saving and high thermal efficiency, Uses safely and conveniently. 4.Simple operation, non-industrial pollution. 5.Advanced, reliable, practical and economical. Detailed product specifications, please visit our website jtfurnace com. |
|
| » Posted by: Foshan Jutong Industrial Furnace Co., Ltd [China] |
|
|
|
|
|
[Sell]
Roller Tilting Carburizing Furnace |
|
|
| Welcome to visit jtfurnace dot com. Roller Tilting Carburizing Furnace is mainly used for low-carbon steel and alloy steel small workpiece carburizing, carbonitriding. Advantages: 1. The equipment consists of furnace body, swiveling mechanism, tilting device, control system components. 2. Uniform temperature, carbon potential and diffusion layer, and quick carburizing. 3. Use of high-quality,high-temperature ceramic fiber insulation, good thermal insulation performance, fast heat up. 4. The temperature control uses the PID automatic control power, smooth temperature control, uniform temperature, no impact to electric network. Detailed product specifications, please visit our website. |
|
| » Posted by: Foshan Jutong Industrial Furnace Co., Ltd [China] |
|
|
|
|
|
[Sell]
Double-glass solar tube of solar water heaters |
|
|
| Reliable and efficient with twin-glass solar tubes. Easy plug-in installation. Outer tank material: stainless steel plate. Reliable and efficient with twin-glass solar tubes. Easy plug-in installation. Outer tank material: stainless steel 304/2B. Inner tank material: 0.4mm thick SUS304 food grade stainless steel plate. Frame material: stainless steel 304/2B(1.2mm thickness). Superior heat preservation ensured by 50 - 65mm polyurethane foam insulation laye. |
|
| » Posted by: ChangZhou Nature Solar Energy Co.,LTD. [China] |
|
|
|
|
|
[Sell]
Vacuum Varying Pressure Nitriding Furnace |
|
|
| Welcome to visit jtfurnace dot com. Vacuum Varying Pressure Nitriding Furnace advantages: 1.Nitriding quickly Temperature hol tages are summarized as follows (Take example of H13 aluminum nitriding processes.)ding time: 8 to 10 hours; Nitriding layer depth: 0.14 to 0.18mm; 2.High surface hardness After nitridized, surface hardness of the die can reach from HV1000 to HV1200. 3.Big capacity and low processing cost Applying vacuum impulse nitriding technology, fresh atmosphere can spread evenly, so we can load in many work pieces. 4.Small surface friction coefficient The surface nitride layer of work pieces are made compact with vacuum impulse nitriding technology, so the surface friction coefficient is small. 5.Low brittleness 6.Stable performance 7.Easy operation 8.Wide adaptability and uniform diffusion layer Detailed product specifications, please visit our website. |
|
| » Posted by: Foshan Jutong Industrial Furnace Co., Ltd [China] |
|
|
|
|
|
[Sell]
Vacuum Impulse Nitriding Furnace |
|
|
| Welcome to visit jtfurnace dot com. Vacuum impulse nitriding furnace advantages: 1.Nitriding quickly Temperature hol tages are summarized as follows (Take example of H13 aluminum nitriding processes.)ding time: 8 to 10 hours; Nitriding layer depth: 0.14 to 0.18mm; 2.High surface hardness After nitridized, surface hardness of the die can reach from HV1000 to HV1200. 3.Big capacity and low processing cost Applying vacuum impulse nitriding technology, fresh atmosphere can spread evenly, so we can load in many work pieces. 4.Small surface friction coefficient The surface nitride layer of work pieces are made compact with vacuum impulse nitriding technology, so the surface friction coefficient is small. 5.Low brittleness 6.Stable performance 7.Easy operation 8.Wide adaptability and uniform diffusion layer Detailed product specifications, please visit our website. |
|
| » Posted by: Foshan Jutong Industrial Furnace Co., Ltd [China] |
|
|
|
|
|
[Sell]
Pallet-type Continuous Bright Carburizing Quenching Furnace |
|
|
| Wlecome to visit jtfurnace dot com. Pallet-type Continuous Bright Carburizing Quenching Furnace is used in batch heat treatment for all kinds of middle and small metal parts (bearings, chains, automotive parts, standard parts, hardware tools) carburizing, carbonitriding, bright quenching etc. Advantages: 1.Optimizing the structure design, easy maintenance. 2.Atmosphere controls stably, processing product organization is stable 3.Oil tank with the cold heat exchanger, can control the oil temperature. 4.Washing machine is equipped with the oil-water separator and the strong dry winds system. 5.Tempering furnace heating elements have upper and lower sub-row design layout, with the mixing fans, temperature uniformity. The processing piece quality is stable. 6.Products with low residual austenite, hardness uniform, bright and clean surface. Detailed product specifications, please visit our website jtfurnace com. |
|
| » Posted by: Foshan Jutong Industrial Furnace Co., Ltd [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 next»
|
|
