|
|
|
|
|
|
|
[Sell]
Excavator 001 |
 |
|
| KDG serial hydraulic excavator is a new generation of advanced digger machine. which is a kind of mini excavator and shares the leading level in both the domestic and international market. It is the ideal working machine for agriculture, water conservation and engineering construction. Engine System Equipped with engine which is researched and developed by our company; Enjoys perfect performance,higher power, lower fuel consumption, exhaust and noise. Compact Structure, No Tail Rotation The no tail rotation structure is applied; as a result, the tail part is contained within the pedrail range and the excavator can now work freely even in the long and narrow area. The machine working efficiency is greatly improved. Boom Side-shift Device With the side-shift device on the front, the excavator can work on the cliff or wall directly and easily, so that the machine application range is widened. Good Stability It is designed with excellent stability in every digging direction, in order to ensure comfort and safety for the driver. Instrument The liquid crystal electric monitor is used to check the operation conditions, such as the fuel level, cooling water temperature, and alarm system. Operation System World-class advanced operation system is applied for easy operation of boom, bucket rod, rotation, earth pushing and swing; the labor intensity is also reduced. Beautiful and Fashionable Appearance The whole covering surface is pressed and painted with advanced technology, so the machine appearance is extremely colorful and attractive. Convenient Daily Check Open the rear cover, left cover and front door, and then check the hydraulic system, engine system and the accessory parts, there is no need for any tools. Easy Maintenance It takes only few minutes to disassemble the right cover, front cover, tool tank and check the inner parts. Maintenance-free Battery First-class quality and long working time. Hydraulic System Application of full power variable control system results in high efficiency and low fuel consumption and avoids enginesshutting down from over load. It is featured by fine compound action cooperation, large digging force and traction force, and world famous hydraulic components. Technical data: Model KDG15 Bucket capacity (m3) 0.05 Standard bucket width (with/without sharpener) (mm) 460.7/398 Operation weight (kg) 1720 Overall dimension (LxHxD) (mm) 3570x2260x1350 Engine model KD373 Engine rated output (kw/r/min) 10.7/2200 Max. digging height (mm) 3365 Max. dumping height (mm) 2305 Max. digging depth (mm) 2105 Max. vertical digging depth (mm) 1830 Max. digging radius (mm) 3875 Side-shift amount for big boom(left/right) 53/57 Min. front gyration radius (mm) 1505(1035) Min. rear gyration radius (mm) 640 Max. digging force(bucket) (Kn) 11 Pedrail Rubber Pedrail width (mm) 250 Travelling speed (km/h) 2.4 Grade ability (%) 50 Gyration speed (r/min) 8 Shovel mould board (width) (mm) 1350 Shovel mould board (height) (mm) 253 Lifting distance (up/down) (mm) 215/160 Hydraulic pump Variable plunger pump x 2 + Gear pump x 1 Rotary motor Cycloidal hydraulic motor Travelling motor Plunger hydraulic motor Fuel tank capacity (L) 20 |
|
» Posted by: Hydman Enterprises Co.,Ltd. [China]  |
|
|
|
|
|
[Sell]
Wheel loader 001 |
|
|
| KDD serial wheel loader is researched and developed independently by our company, which is a kind of medium and small size loader with four wheel drive and full hydraulic drive, and shares the leading level in both the domestic and foreign market. Designing theory: advanced technology, excellent performance, reliable running, easy operation, safe and comfortable traveling. It is widely used in different sites, such as engineering construction, highway and mine operation. Front/Rear Axle Planetary transmission is equipped with a compact structure and big torque. Friction sheet and antiskid transmission ensure strong cross-country and climbing capacity. Cab With new steel frame, the cab features wider view field, reliable safety and low noise. Spacious cab is provided with instruments and control devices in reasonable arrangement for convenient operation. Noise-absorbing, thermal insulation, and high class decoration materials are used for internal decoration. The low vibration suspending seat is designed specially for the operators and improves human feeling. The air conditioner is optional. Humper Supporting device for lifting operation to prevent sudden falling and ensure safety and reliability. Welding Structure New-style articulated front/rear frames, small turning radius, good through and climbing capacity. Good carrying capacity and stability. Hydraulic System The variable plug pump motor is adopted in the traveling system which leads to simple operation, stable traveling and reliable performance. The high-pressure gear pump is adopted in the working system which leads to quick lifting speed and high efficiency. All the hydraulic parts are well-known brands in China, with perfect and reliable performance. Wide Thread Steel Radial Tyre Excellent cutting proof and wearproof performance, wide antiskid groove, good heat dispersion and self-washing performance, big adhesive to ground, and nice traction. Widely applied for mining, earth-moving, loading and digging operation. Electric System The cable and jacket are made of anti-flaming material. High-grade battery and electric parts are applied to ensure more reliable and stable system. Technical data: Model KDD05 Type Rubber-tyred, hinge joint turing 12h Rated powerkW/(r/min) 17.9/2200 Overall dimension (LxWxH) (mm) 362013302440 With cab 362013301800 With pedrail Wheelbase(mm) 1080 Wheel track(mm) 1550 Operation weight(kg) 2200 Min. turning radius(mm) 3000 Grade ability(%) 30 Min. Ground clearance(mm) 240 Speed(km/h) High speed 0-15 Low speed 0-5 Travelling system Closed system, variable plunger pump, variable motor Working system Quantified gear pump Dumping height(mm) 1900 Dumping reach(mm) 700 Working time Lifting(s) 4.5 Descending&Pitch( (s) 9.5 Bucket capacity(m) 0.30 Rated loading weight(kg) 500 Dumping angle() 45o Max traction force [kN(kgf)] 13.5 |
|
| » Posted by: Hydman Enterprises Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
Tow truck 002 |
|
|
| Characteristic: E-type2-stage tow hitch can be romotely controlled by lever next to the drivers seat Full-hydraulic power steering 2-Sped automatic transmission,power assised brakingEngine ,transmission,main parts are all from Japan,extra tranmission oil coler and forward reverse interlock futher guarantee reliablility and duralility. SPECIFICATIONS: 1) Max.drawbar pull(kg):2000,2500,3000 2) Max.towed weight(with a train of trailer) (kg):39000,49000,54000 3) Max.gradeability: 45% Main Technical Specifications Model code QCD20-KM QCD25-KM QCD30-KM Max.drawbar pull kg 2000 2500 3000 Max.towed weight at dry even concrete durface With one trailer kg 26000 33000 36000 With a train of trailers kg 39000 49000 54000 Travel speed Forward km/h 26 26 30 Backward km/h 23 23 26 max.gradeability No load % 45 45 38 Overall length(with coupler) mm 3085 3085 3105 Overall width mm 1440 1440 1440 Overall height mm 1420 1420 1440 Min.turning radius Outer mm 3265 3265 3265 Floor height mm 425 425 425 Seat height mm 980 980 990 Center height coupler mm 350/450 350/450 350/450 Min.ground clearance mm 130 130 130 Truck weight(No load) kg 3550 4050 4400 Engine TD27 CYQD32 |
|
| » Posted by: Hydman Enterprises Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
0.017mm stainless steel wire |
|
|
| Material: 316,316L stainless steel Diameter:0.017~0.03mm Application: Chemical industry; high quality filters and elements;anti-radiation cloth.etc |
|
| » Posted by: Hydman Enterprises Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
Punched Slot Screen |
|
|
| Punched Slotted Screen Composed of base pipe, high-density punched slot shroud and stainless steel support rings, : It has 3-4 layers: Base pipe: Slotted API 5CT Filter screen: wire-mesh, or metal cotton ( and inner protective layer) Protective jacket: Punched stainless. All the layers are connected by welded backup ring The HUEIG punched slot screen has following features: 1, higher filtering ability , with higher self-cleaning ability. Besides, rigid filtering shroud, and effectively protects. 2 Effective across area is approximately 3-5 times as big as slotted screen.. 3, higher base pipe mechanical strength by addoping API tubing 4, High corrosion resistance, and great tripping-in performance Specs and details may be obtained by e-mail or telephone |
|
| » Posted by: Hebei United Energy Industry Co. Ltd. [China] |
|
|
|
|
|
[Sell]
wire wrapped screen |
|
|
| Wire Wrapped Screen Composed of base pipe and wrapped wire which made of support rod and profile wire, Base pipe: API 5CT tubings Wrapped wires: mainly are stainless materials such as 302304304L316316L 434L. Length:5000- 6000MM Features 1,solid structure, high porosity, precise gap size. 2,Easy to wash, long life, reliable. 3,low cost for sand control operating. 4, High temperature tolerance. Specs and Details may be obtained by e-mail or telephone. . |
|
| » Posted by: Hebei United Energy Industry Co. Ltd. [China] |
|
|
|
|
|
[Sell]
AMWEI NTC Thermistors Temperature Sensor Probe Assemblies |
|
|
NTC Thermistor can be assembled in housing in a variety of configurations for temperature sensing, measurement, detection, indicator, monitoring and control. Thermistor temperature sensor probe assemblies can conveniently attach to or be an integral part of any system to monitor or control temperature.The choice of assembly is dependent on the application. The primary factors which determine the optimum configuration of a thermistor assembly are the operating environment, mounting, time response and minimum dissipation constant.
The two factors which do vary considerably with thermistor sensor probe assembly design are time constant and dissipation constant. The time constant will typically be of greater duration in encapsulated thermistors. This is, of course, due to additional mass surrounding the thermistor element; therefore, extending the thermal transfer time. Dissipation constant will also be greater in assemblies. The additional housing mass serves well as a heat sink. Greater power is therefore required to induce self-heating. Both time constant and dissipation constant will vary with the selected thermistor and housing. Heat transfer properties of the housing, thermistor location, mass and wire type determine these constants.
Applications for temperature sensing include air temperature sensors, surface temperature sensors and immersion temperature sensors. Housings for air temperature sensors are often simple, inexpensive devices such as molded plastic shells, deep-drawn brass or aluminum cylinders, or even stainless steel tubes. Surface temperature sensors are designed to match the contour of the surface to be sensed, whether it's flat, curved, or round. Mounting holes or clips are often used to simplify installation of the sensor. Immersion temperature sensors are designed so that the sensing element will be surrounded by the medium to be sensed, often times a liquid. The sensing portion will normally protrude through a hole or orifice while a portion of the assembly will remain outside the medium to allow for the signal to be read. Immersion housings are usually threaded to allow them to be screwed into a hole or opening. Immersion part requests to be liquid and humidity prevention.
The material used for the housing will be dependent upon the temperature range needed, response time, cost, and special considerations such as UL, FDA or NSF requirements in food and/or medical applications. Some of the materials available include stainless steel, copper, plastic, teflon, brass, aluminum, epoxy and heat shrinkable tubing. |
|
| » Posted by: AMWEI Thermistor [China] |
|
|
|
|
|
[Sell]
Polycrystalline silicon solar cells 45W |
|
|
Speifications
Cell Polycrystalline silicon solar cells
125mm*52mm
No.of cells and connections 36(4*9)]
Dimension 537*665*28(mm)
Weighe 5.8kg
Limits
Operating temperature -40 to +85℃
Maximum system voltage 715VDC
Characteristics
Model ADD-45M
Open circuit voltage(Voc) 21.9v
Optimum operating voltage(Vmp) 17.v
Short circuit current(Isc) 2.78A
Optimum operating current(Imp) 2.50A
Maximum power at STC(Pm) 45Wp
STC:1000W/㎡， 25℃， AM1.5
Temperature and coefficients
NOCT 46℃±2℃
Current temperature coefficient %/K 0.06±0.01
Voltage temperature coefficient mV/K -(165±10)
Power temperature coefficient %/K -(0.5±0.05) |
|
| » Posted by: ADD Solar Energy Group Co.,Ltd [China] |
|
|
|
|
|
[Sell]
COPPER CATHODE/COPPER SCRAP FOR SELL |
|
|
WE ARE A SCRAP EXPORTING COMPANY WE HAVE READY STOCK COPPER SCRAP, COPPER CATHODE, COMPRESSOR SCRAP, CAR BATTERY SCRAP,HMS 1&2,
WE ARE A SCRAP EXPORTING COMPANY WE HAVE READY STOCK COPPER SCRAP, COPPER CATHODE, COMPRESSOR SCRAP, CAR BATTERY SCRAP,HMS 1&2, USED RAILS R50 R65,
SPECIFICATION OF COPPER WIRE BERRY
CHEMICAL COMPOSITION
Element...........(%)
Copper............99.60% (Min.)
Lead................0.006% (Max.)
Bismuth............0.003% (Max.)
Total impurities.........0.09% (Max.)excluding Ag & Oxygen
STANDARD CONFORMI TO :(C11000 (ETP) Content 99.60%.) |
|
» Posted by: AMICAM SARL [Cameroon]  |
|
|
|
|
|
[Sell]
Wooden Sauna Bucket |
|
|
| Wooden Sauna Bucket 1.Material: wood 2.Durable to use,and the best price |
|
| » Posted by: Foshan Tong Wong Steam Bath Equipment Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Manufactuer of Massage Bathtub Control Panel |
|
|
| Manufactuer of Massage Bathtub Control 1.With CE standard 2.With simple apearance 3.With leakage,ultra-temperature,antidry protection 4. Custom-made is available. Massage Bathtub Controller with CE: 1. air pump 2. water pimp 3.lock key 4.light 5.more functions are available The AD series controller is widely applied in shower rooms, steam rooms, massage pools, massage bathtubs, and beauty mechanisms. Meanwhile, we have some professional engineers and designers to design and develop new products according to the needs of consumers. Superior quality to make comfortable life. |
|
| » Posted by: Foshan Tong Wong Steam Bath Equipment Co., Ltd. [China] |
|
|
|
|
|
[Sell]
3-9KW Mini Sauna Heater with CE |
|
|
| 3-9KW Mini Sauna Heater with CE Feature of sauna heater: 1.Energy efficient 2.Digital controls included 3.Flatwall mount 4.Double overheat protection for high reliable 5.Stainless steel elements 6.Heating elements offer long life and enhanced protection against corrison 7.partially painted /stainless steel body 8.Built-in 30-110 degrees celsius temperature and 1-8 hours of time controller Technology Parameters 1.Available from 3KW to 9KW 2.Dimension 410*250*570mm 3.Voltage 220V 4.Current 13.6-41A 5.Sauna room volume 3-14 6.Stone volume 10-15kg stone 7.Temperature sering 25C-60C 8.Time setting(min)1-99 |
|
| » Posted by: Foshan Tong Wong Steam Bath Equipment Co., Ltd. [China] |
|
|
|
|
|
[Sell]
China offer Box Furnace |
|
|
| Welcome to visit jtfurnace dot com. Please email to jtfurnace at hotmail dot com. China Box Furnace is period operating furnace, mainly for steel parts,alloy steel parts, Austenitic stainless steel parts of normalizing, annealing, quenching etc. heat treatment. When the technology needs, may pass into the protective gas to reduce oxidation of components. China Box Furnace Advantages: 1. Heating elements are evenly distributed in the furnace chamber, the layout is reasonable. 2. After protective atmosphere annealing, the product non-oxidation, eliminates the machining stress. 3. Door clamping device to improve the furnace sealing to prevent leakage of furnace gas. 4. The temperature control uses the PID automatic control power, smooth temperature control. Detailed China Box Furnace specifications, please visit our website jtfurnace dot com. And email to jtfurnace at hotmail dot com. |
|
| » Posted by: Foshan Jutong Industrial Furnace Co., Ltd [China] |
|
|
|
|
|
[Sell]
Large power Sauna Bath Heater SC-210 |
|
|
| Large power Sauna Bath Heater SC-270 Feature of Sauna heater:21KW-30KW 1.Energy efficient 2.Digital controls included 3.Flatwall mount 4.Double overheat protection for high reliable 5.Stainless steel elements 6.Heating elements offer long life and enhanced protection against corrison 7.partially painted /stainless steel body 8.Built-in 30-110 degrees celsius temperature and 1-8 hours of time controller Technology Parameters: 1.Available from 21KW to 30KW 2.Voltage: 380V 3Current 55.3A-79A Controller: 1.sauna light: 2.Temperature sering 25C-60C 3.Time setting(min)1-99 |
|
| » Posted by: Foshan Tong Wong Steam Bath Equipment Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Bathroom Exhaust Fan |
|
|
| Bathroom Exhaust Fan : 1. High air flow 2. Low noise 3. Long lifetime 4.Using in steam room |
|
| » Posted by: Foshan Tong Wong Steam Bath Equipment Co., Ltd. [China] |
|
|
|
|
|
[Sell]
China offer Pit Tempering Furnace |
|
|
| Welcome to visit jtfurnace dot com. Please email to jtfurnace at hotmail dot com. China Pit Tempering Furnace is period operating furnace, for the light alloy parts heat treatment and steel parts tempering. China Pit Tempering Furnace advantages: 1. Heating elements are evenly distributed in the furnace chamber, the layout is reasonable. 2. Cover lifting by the manual mechanism or hydraulic device to complete, easy to operate. 3. The temperature control uses the PID automatic control power, smooth temperature control. Detailed China Pit Tempering Furnace specifications, please visit our website jtfurnace dot com. And email to jtfurnace at hotmail dot com. |
|
| » Posted by: Foshan Jutong Industrial Furnace Co., Ltd [China] |
|
|
|
|
|
[Sell]
Pit Furnace with protective atmosphere |
|
|
| Welcome to visit jtfurnace dot com. Please email to jtfurnace at hotmail dot com. Pit Furnace With Protective Atmosphere is period operating furnace, mainly for steel parts, Copper parts, especially each kind of transformer mutual inductor ferrite core components and each kind of silicon steel plate silicon sheet steel of nitrogen atmosphere in the annealing and tempering heat treatment. Pit Furnace With Protective Atmosphere Advantages: 1. Heating elements are evenly distributed in the furnace chamber, the layout is reasonable. 2. Electric furnace with hot air circulation system that allows the muffle atmosphere and temperature uniformity. 3. Can be equipped with vacuum pump, increase the ventilation rate, the atmosphere is more pure. 4. Has the protective atmosphere, after the annealing the product non-oxidation, eliminates the machining stress, enhances the iron core magnetism performance, reduces the iron loss. 5. The temperature control uses the PID automatic control power, smooth temperature control. Detailed Pit Furnace with protective atmosphere specifications, please visit our website jtfurnace dot com. And email to jtfurnace at hotmail dot com. |
|
| » Posted by: Foshan Jutong Industrial Furnace Co., Ltd [China] |
|
|
|
|
|
[Sell]
China offer Pit Furnace |
|
|
| Welcome to visit jtfurnace dot com. Please email to jtfurnace at hotmail dot com. China Pit Furnace have been in use for a long time with industry and commercial heat treaters. mainly for steel parts,especially the shaft parts of normalizing, annealing, quenching, Oxidation etc. heat treatment. When the technology needs, may pass into the protective gas to reduce oxidation of components. Heat Treatment applications at temperature up to 1100 degree. China Pit Furnace advantages: 1. Heating elements are evenly distributed in the furnace chamber, the layout is reasonable. 2. Cover lifting by the manual mechanism or hydraulic device to complete, easy to operate. 3. The temperature control uses the PID automatic control power, smooth temperature control. Detailed China Pit Furnace specifications, please visit our website jtfurnace dot com. And email to jtfurnace at hotmail dot com. |
|
| » Posted by: Foshan Jutong Industrial Furnace Co., Ltd [China] |
|
|
|
|
|
[Sell]
Quenching Furnace with protective atmosphere |
|
|
| Welcome to visit jtfurnace dot com. Please email to jtfurnace at hotmail dot com. Pit type Quenching Furnace with protective atmosphere, mainly for various dies and machinery components in the protective atmosphere such as quenching heat treatment without oxidation. Quenching Furnace with protective atmosphere Advantages: 1. Use of high-quality high-temperature ceramic fiber insulation, thermal insulation performance, fast heat up. 2. The temperature control uses the PID automatic control power, smooth temperature control, temperature uniformity, no impact to electric network. 3. Uses the water cooling seal ring form to ensure no leakage. 4. The cover is equipped with a drip device, into ammonia tube, sampling tube, exhaust pipe, U-type pressure gauge, easy control and can achieve carbonitriding process. 5. Optional infrared CO2 analyzer, oxygen sensor to achieve automatic control and recording of the furnace carbon potential. Detailed Quenching Furnace with protective atmosphere specifications, please visit our website jtfurnace dot com. And email to jtfurnace at hotmail dot com. |
|
| » Posted by: Foshan Jutong Industrial Furnace Co., Ltd [China] |
|
|
|
|
|
[Sell]
China Offer Roller Type Carburizing Furnace |
|
|
| Welcome to visit jtfurnace dot com. Please email to jtfurnace at hotmail dot com. Roller Type Carburizing Furnace is mainly used for low-carbon steel and alloy steel small workpiece carburizing, carbonitriding. Roller Type Carburizing Furnace Advantages: 1. The equipment consists of furnace body, swiveling mechanism, tilting device, control system components. 2. Uniform temperature, carbon potential and diffusion layer, and quick carburizing. 3. Use of high-quality,high-temperature ceramic fiber insulation, good thermal insulation performance, fast heat up. 4. The temperature control uses the PID automatic control power, smooth temperature control, uniform temperature, no impact to electric network. Detailed Roller Type Carburizing Furnace specifications, please visit our website jtfurnace dot com. And email to jtfurnace at hotmail dot com. |
|
| » Posted by: Foshan Jutong Industrial Furnace Co., Ltd [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 next»
|
|
|
