|
|
|
|
|
|
[Sell]
Hall Effect System electromagnetic effect |
|
|
1. Function Measurement of Hall Effect and magnetic resistance, curves of I-V and R-T. Parameters to be measured: Hall Effect- sheet resistance, resistivity, Hall coefficient, conductivity type, Hall mobility, carrier concentration; Magnetic resistance effect: I-V curve: I-V curves at different temperature and magnetic field. R-T curve: Under different magnetic field, the curves for resistance changes with temperature. 2. Material to be measured: Semiconductor materials: Si, Ge, AlGaAs, GaAs, GaN, HgCdTe, CdTe, etc. Low impedance materials: metals, transparent oxides, weak magnetic semiconductor materials, TMR materials. Ferrite. 3. Technical Details: Magnetic field range: 1.7T (pole spacing 22mm) 1.1T (pole spacing 40mm) Resistance range: 1mΩ ~ 10MΩ Carrier concentration: 106 ~ 1019cm3 Migration rate: 100 ~ 105cm2/Vs Systematic measurement errors: <2% Measurents from room temperaure (300K) to 77K (LN2). 4. Features: 1). Real-time closed-loop control system using magnetic fields, can provide high stability of the magnetic field, the user can freely change the magnetic field required for testing; 2). Test samples in the low-temperature nitrogen atmosphere, the sample temperature and the temperature of the gas exchange is the same, there is no heat transfer due to measurement errors caused by temperature and temperature gradient effects within the sample; 3). Quick and easy replacement of the sample to improve the testing efficiency; 4). Automated testing software, can achieve a constant magnetic field variable-temperature automatic testing, automatic constant temperature, magnetic field test, or variable-temperature magnetic field of automated testing, variable-temperature magnetic field of automated testing is a more complete and comprehensive testing; 5. Electrode contacts: 4 or 6 6. Temperature environment: The standard variable-temperature system with no option but to carry out measurements at room temperature. Liquid nitrogen Dewar or refrigerator available options, the line of low temperature test. 7. Magnetic field: The use of electromagnets can produce 0 ~ 2T variable magnetic field. 8. Sample max. voltage: 200V 9. Current range of sample: ±10nA to±1A; 10. Resistance range: 1mΩ ~ 10MΩ |
|
» Posted by: Dexing Magnet Tech. Co., Ltd [China] |
|
|
|
|
|
[Sell]
DXMC25-100 generator field coil helmholtz magnetic induction coil |
|
|
DXMC25-100 One Axis DC Helmholtz Coil Introduction: Using two same coils with equal radius and turns,arrange them to be coaxial and let their distance be equal to the radius of the coil,this called Helmholtz coil. DXMC25-100 one axis Helmholtz coil is consist of two coils with average radius 250mm, to generate 100Gs uniform magnetic field. Technical parameters: 1. Center magnetic field Hmax : 100Gs 2. Magnetic field center evenness(^H/H) : 0.1% 3. Even magnetic space : D83 X 83 mm3 4. Average diameter : 500mm 5. Weight : 10kg 6. DC resistance : 4 Ohm 7. Power of power source: 600W 8. Continious working time (200Gs) : 30min Application: 1. to generate standard magnetic field 2. calibration for Hall probes and various magnetometers 3. compensation for earth magnetic field 4. judgement for magnetic shielding effect 5. measurement and removement for space radiation magnetic field 6. for magnetic properties 7. study for biomagnetism Note: Magnetic field intensity: the value of the magnetic field in the magnetic field center, when power is maximum Uniform area: the relatively homogeneous magnetic field space surrounding magnetic field center, or the required magnetic field for users’experiments Space uniformity: the magnetic deviation degree in uniform area Stability: the degree of change when the magnetic field working over a period of time. Working time: the longest using time Work period: the interval time between continuous work for more than two times |
|
» Posted by: Dexing Magnet Tech. Co., Ltd [China] |
|
|
|
|
|
[Sell]
3 Axis Helmholtz Coil magnetic field induction coil |
|
|
Helmholtz Coil Using two same coils with equal radius and turns,arrange them to be coaxial and let their distance be equal to the radius of the coil,this called Helmholtz coil. It can be used to generate magnetic field from extremely weak magnetic to hundreds of Gauss. Specifications: Model Shape Average radius (cm) Center magnetic field(Gs) Power (W) Even magnetic field space(mm3) Magnetic field center evevness ^H/H DXHC75-5 square 75 5 500 375×375×375 1×10-2 250×250×250 1×10-3 DXHC75-2 square 75 2 300 60×60×60 1×10-4 DXHC60-10 square 60 10 700 200×200×200 1×10-3 48×48×48 1×10-4 DXHC60-2 square 60 2 200 300×300×300 1×10-2 DXHC50-20 square 50 20 800 250×250×250 1×10-2 DXHC50-2 square 50 2 100 40×40×40 1×10-4 DXHC40-50 square 40 50 1500 200×200×200 1×10-2 DXHC40-10 square 40 10 400 133×133×133 1×10-3 DXHC40-2 square 40 2 100 32×32×32 1×10-4 DXMC30-300 round 30 300 5500 150×150×150 1×10-2 DXMC30-50 round 30 50 1000 24×24×24 1×10-4 DXHC30-10 round 30 10 200 150×150×150 1×10-2 DXHC30-2 round 30 2 50 100×100×100 1×10-3 DXMC25-1000 round 25 1000 8000 Ø125×125 1×10-2 DXMC25-500 round 25 500 4000 Ø83×83 1×10-3 DXMC25-50 round 25 50 500 Ø20×20 1×10-4 DXMC25-10 round 25 10 100 Ø125×125 1×10-2 DXMC25-2 round 25 2 20 Ø83×83 1×10-3 DXMC20-500 round 20 500 2500 Ø100×100 1×10-2 DXMC20-50 round 20 50 500 Ø67×67 1×10-3 DXMC20-10 round 20 10 100 Ø16×16 1×10-4 DXMC20-5 round 20 5 50 Ø100×100 1×10-2 DXMC20-2 round 20 2 30 Ø67×67 1×10-3 DXMC15-300 round 15 300 1000 Ø75×75 1×10-2 DXMC15-100 round 15 100 400 Ø12×12 1×10-4 DXMC15-10 round 15 10 50 Ø50×50 1×10-3 DXMC10-200 round 10 200 400 Ø50×50 1×10-2 DXMC10-50 round 10 50 100 Ø8×8 1×10-4 DXMC10-10 round 10 10 30 Ø50×50 1×10-2 DXMC7-100 round 7 100 100 Ø35×35 1×10-2 DXMC7-50 round 7 50 50 Ø23×23 1×10-3 DXMC7-10 round 7 10 20 Ø6×6 1×10-4
|
|
» Posted by: Dexing Magnet Tech. Co., Ltd [China] |
|
|
|
|
|
[Sell]
Strong magnetic field powerful electromagnet electric magnet |
|
|
DXSG Series Fixed Air Gap Electromagnet: Double-yoke fixed air gap electromagnets have the best rigidity, they can installed vertically or at certain angle, and the magnetic field is horizontal. This kind of electromagnets are suitable for applications of the situation that requires strict magnetic field gap changes and high magnetic field evenness, such as NMR test, vibration sample magnetometer and so on. The magnetic air gap can be changed through replacing magnetic pole-head. DXSG Double-Yoke Fixed Air Gap Electromagnet Model Pole Diameter (mm) Air Gap Range (mm) Polar Face (mm) Maximum Magnetic Field (T) Power (KW) DXSG-100 Ø100 10 Ø50 2.0(10mm air gap) 1.6 DXSG-130 Ø130 30 Ø60 1.7(30mm air gap) 3.0 DXSG-200 Ø200 30 Ø100 1.7(30mm air gap) 5.0 DXSG-300 Ø300 30 Ø80 2.7(30mm air gap) 20.0 DXSG-380 Ø380 25 Ø150 2.95(25mm air gap) 22.0 DXSG-550 Ø550 50 Ø140 3.5(50mm air gap) 50.0 More models, please visit our website or contact us.
|
|
» Posted by: Dexing Magnet Tech. Co., Ltd [China] |
|
|
|
|
|
[Sell]
Adjustable Air Gap Powerful Electromagnet |
|
|
DXSB Double-Yoke Double-Tuning Adjustable Air Gap Electromagnet Introduction of DXSB Double-Yoke Double-Tuning Adjustable Air Gap Electromagnet: Designed with best rigidity, magnetic circuit symmetry. The electromagnet can be fixed upright, down or to certain angle. This kind of electromagnet can be used in many kinds of magnetic testing. For example: magnetic material testing, vibration sample magnetometer, magnetic susceptibility testing, Hall Effect research, Torsion magnetometer, magneto-optical effect test, hysteresis flex test and MRI test, etc. Model Pole Diameter (mm) Air Gap Range (mm) Pole Face (mm) Magnetic field index Power Air Gap (mm) Maxium Magnetic Field(T) DXSB-50 D50 0-80 D50 10 1.0 0.3KW DXSB-100 D100 0-80 D60 10 2.0 1.6KW D100 20 1.15 DXSB-130 D130 0-100 D60 10 2.55 3.0KW D120 30 1.3 DXSB-175 D175 0-120 D60 10 2.65 5.0KW D100 50 1.4 D150 100 0.7 DXSB-200 D200 0-140 D60 10 2.8 8.0KW D80 30 1.8 D140 70 1.0 DXSB-250 D250 0-140 D60 10 3.2 12.0KW D80 40 2.1 D120 80 1.3 DXSB-280 D280 0-150 D70 10 3.45 16.0KW D120 70 1.7 DXSB-380 D380 0-180 D100 40 2.4 20.0KW
|
|
» Posted by: Dexing Magnet Tech. Co., Ltd [China] |
|
|
|
|
|
[Sell]
DX-2012H DC Hysteresis Graph Test System for Hard Magnet |
|
|
DX-2012H DC Hysteresis Graph Test System Automatic measurement of the demagnetization curve of permanent magnetic material such as ferrite, AlNiCo, NdFeB, SmCo, etc. Accurate measurement of the magnetic characteristic parameters of remanence Br, coercive force HcB, intrinsic coercive force HcJ and maximum magnetic energy product (BH)max. Windows measurement software applied simply. The product conforms to China National Standards GB/T 3217-92, GB 11209-89 and international standard IEC 404-5. Adopt ATS structure, users can customize different configuration as required: According to the intrinsic and size of measured sample to decide the electromagnetic size and corresponding testing power supply; Select different measuring coil and probe according to the option of measuring method. Decide to whether choosing fixture in accordance with sample shape. Decide to whether selecting heating installation or not according to the test requirement. General Features of DC Hysteresis Graph (DX-2012H) Automatic measurement on saturation hysteresis loop and magnetic characteristic parameters of generally permanent-magnet material such as Ferrite, Rubber & Plastic Magnet and AlNiCo, etc.: Js, Br, HcB, HcJ, (BH)max and µrec. Automatic measurement on demagnetization curve and magnetic characteristic parameters of rare earth permanent-magnet materials such as NdFeB and SmCo, etc. at the second quadrant: Br, HcB, HcJ, Hk(H90) and (BH)max. Test sample shapes: circular ring, round cake, square, tile and other irregular shapes. Adopt B coil + fluxmeter to measure magnetic induction, zero shift of integrator can be self-corrected through software. Adopt J coil + fluxmeter to measure magnetical polarization, remnant coil area of J coil can be automatically compensated through software. Magnetic field intensity can be measured with Hall magnetometer, nonlinear error of hall probe can be corrected through software, within 0 ~ 2.4T range, nonlinear error can be controlled within±0.2%. Adopt H coil + fluxmeter to measure magnetic field intensity, Hall magnetometer only used to indicate zero point of magnetic field so as to thoroughly eliminate nonlinear error of hall probe. Optimal range of field voltage, fluxmeter and magnetometer can be automatically set up. Magnetization, testing and demagnetization of general permanent magnetic sample completed at one time, time set up 20 seconds ~ 60 seconds. Rare earth permanent magnetic samples need saturation magnetizing before testing, testing time 60 seconds ~ 120 seconds. The sample after tested is in demagnetization or magnetizing status, freely selected by users. Select heating head and temperature controller to detect magnetic characteristics of Ferrite, AlNiCo and rare earth material under high temperature (maximal 220°C). Select shoe jig for direct measurement on magnetic shoe. Technical Data of DC Hysteresis Graph (DX-2012H) System Specifications Test AlNiCo standard sample, measuring error on entire magnetic hysteresis cycle estimated: B: 1%, H: 1% Parameters measured Br(%) HcB(%) HcJ (%) (BH)max(%) Uncertainty (k=2) 1 1 1 2 Repeatability (constant temperature) ± 0.3 ± 0.3 ± 0.3 ±1 Instrument Specifications TPS-2000H Test Power Supply DCT150 Electromagnet Output Voltage: 0 ~±100V Output Current:±20A (maximum value) Stability: superior to 0.05% Stability: superior to 0.05% Head Diameter: 150mm shrink to 80mm Head Spacing: 0 ~ 50mm (continual adjustable) Maximal Magnetic Field: 2.4T (head spacing 10mm, coil current 30A) LZ-210B Fluxmeter DCT200 Electromagnet Range: 2.5, 5, 10, 20mWb Full Range Precision: 0.5% Zero Shift: 2µWb /30 seconds (2.5mWb) Head Diameter: 200mm shrink to 120mm Head Spacing: 0 ~ 50mm (continual adjustable) Maximal Magnetic Field: 2.4T (head spacing 10mm, coil current 40A) LZ-210H Magnetometer DCT250 Electromagnet Range: 0.5, 1, 1.5, 3T Full Range Precision: 0.5% Non-Linearity:±0.2% (software correction) Head Diameter: 250mm shrink to 150mm Head Spacing: 0 ~ 50mm (cont |
|
» Posted by: Dexing Magnet Tech. Co., Ltd [China] |
|
|
|
|
|
[Sell]
DX-160 Full digital high precision gaussmeter teslameter magnetic tester |
|
|
DX-160 Full-digital high-precision gauss meter DX-160 Full-digital high-precision gaussmeter/teslameter is designed for high-test precision, high-resolution magnetic field test applications. It provides a wide-range measurement from DC to up to 50kHz AC magnetic field measurement. It also has functions of auto-zeroing and auto-range. Maximum value, minimum value, peak and valley is selectable at hold mode. This instrument can measure and display 6 parameters simultaneously. Units of measure optional Gauss, Tesla, A / M or Oe. This instrument also provides RS232 interface for communications with PC. It is designed and manufactured in accordance with ISO-9001 standard. With the functions of bright VGA color graphics, full menu operation, 5 ¾-bit readings, high-resolution 1 / 600000, it makes you convenient to observe 0.0001mT weak changes in the high magnetic field measurements. It is able to measure maximum at 30KG (3T).It has a large-capacity data storage and you can review the historical-data according to storage time and it can upload data to PC. Products are mainly sold to large institutes, universities and research departments of large factories. Optional: Remote Control System, Gauss Meter Professional mapping software, Industrial control output components, zero gauss chamber Features 5 ¾-bit resolution on VGA color panel Basic DC accuracy: ±0.20% of reading Time and display brightness configurable Basic resolution: 0.00001 mT Maximum/minimum/peak/valley holding and interface locking Threshold setting and alarming Data-storage(auto/manual)/historical-data reviewing Auto-zero, automatic/manual range Probe Auto Calibration / Auto Memory operation mode RS-232C interface / data output Display units optional Gauss, Tesla, A / M or Oe Zero setting / relative measurement mode Communication baud rate adjustment / working temperature display Matching Zero Gauss Chamber/Gauss Meter Professional mapping software dozens of optional basic probe (standard 0.50mm ultra-thin probe) Model-160 Specifications Range 1mT = 10Gs *(0.1mG-30Gs)/(1mGs-300Gs)/(0.01Gs-3000Gs)/(0.1Gs-30KG) Resolution 0.1mGs(0.01uT) Accuracy (display value) DC Reading of 0.20% ± 0.005% range AC ±1% of reading Frequency range DC mode Dc to 50Hz AC mode 2Hz to50kHz Analog Output Output Voltage ±3V F.S. Connectors Standard BNC Additional effects Temperature Coefficient ±(0.02% ±1 count)/ ºC Temperature range Working temperature 0ºC to +50ºC Storage temperature -20ºC to +60ºC Panel Display 3.5 inch VGA, 320 x 240 Pixel Communication Interface RS-232 Standard 9-pin D-type connectors Supply power Voltage: 200/240v Frequency: 50-60 Hz
|
|
» Posted by: Dexing Magnet Tech. Co., Ltd [China] |
|
|
|
|
|
[Sell]
portable gauss meter |
|
|
DX-102 Gaussmeter is a DSP designed hand-held Gauss meter, based on the latest technology of hall-effect measuring instruments for measurement of the magnetic field strength. It has a maximum range up to 0 - ± 30mT, 0 - ± 300mT, 0 - ± 3000mT, and a minimum basic accuracy up to 1.0%, as well as powerful test and display function, easy to carry. It is the best on-site surface magnetic field measuring instrument. Application: Measurement of surface magnetic field, DC coil magnetic field, Air-gap magetic field of DC electromagnet. Features: 1. Onekey zero adjustment automatically 2. Measuring range change automatically 3. Lock the change of peak and relatative mode. 4. Beautiful appearance, clear dot matrix frequency display 5. Calibrated by standard magnetic field. 6. Low carbon saving energy due to low-voltage circuit design. 7. High accuracy and linearity using imported GaAs-hall sensor 8. Power off automatically 9. Peak holding 10. Polarity identifying Technical Parameters: Power Supply 6V battery Measuring Range 0-±30.0mT,0-±300mT,0-±3000mT three gears,gear shifting automatically Accuracy More than 1.0% (full scale) Resolution 0.1 mT(1Gs) Working Condition Temp.: 0~50ºC, humidity:35~80% Normal Probe 0.65mm(D)×3.5mm(W) Senstive area:0.5x0.5mm 1Gs Thin Probe 0.32mm(D)×1.2mm(W) Senstive area:0.25x0.25mm 1Gs Dimension 170mm×90mm×40m Weight 450g
|
|
» Posted by: Dexing Magnet Tech. Co., Ltd [China] |
|
|
|
|
|
[Sell]
New Arrivl lower cost GSM Alarm system King Pigeon S160 SafeBox |
|
|
Android App/ios iKeypad Available Now!!! Make Control Easier! ASK US FOR MORE DETAILS! Specifications: Home Alarm System,S160; 16 Wireless Zones;1Wired Zones; GSM SMS Intruder Alarm; Wireless GSM Home security alarm; GSM Alarm >>>Simple Menu of King Pigeon S160 Alarm Panel: 1) Intelligent GSM Home Alarm system 2) Watchdog Guardian Alarm 3) 16 Wireless + 1 Wired Alarm Zones 4) Home DIY security alarm 5) Easy Arm or Disarm 6)Call control function 7)Top quality GSM Alarm system! If you need more information,please connect with me below: skype: homealarmsystem QQ:1623971938 T:8613823157132 |
|
» Posted by: King Pigeon Hi-Tech.Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
Turn ON/OFF your system with a free call from your mobile |
|
|
GSM Wireless Remote Gate opener: 1.Remote gate opener for door 2.Automatic Door GSM gate opener 3.GSM network free Gate Opener The GSM Gate Opener RTU5015 is a very simple device which can be used for authorized door access, controlling gates, switching of remote equipments, car parking systems. Actually the GSM Gate Opener RTU5015 can be used in places which require to turn ON/OFF your system, machines, equipments remotely with a FREE call from your mobile phone. Just dial from Authorized User number then the Barrier and doors are opened, or the machine are turn on or off by the GSM Gate Opener. There are no call costs, the GSM Gate Opener rejects the call from authorized number then carrys out the turn ON/OFF action. What Applications suitable for? 1.Home and garage owners 2.Business companies 3.Hotels 4.Warehouses 5.Parking places 6.Hospitals 7.Other place need remote switching applications 8.Simple Security Alarm Systems applications If you need more information,please connect with me below: skype: homealarmsystem QQ:1623971938 T:8613823157132 |
|
» Posted by: King Pigeon Hi-Tech.Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
CW series high grade acoustic guitar |
|
|
Scale length:(64.3 cm) Number of Frets: 20 Neck Material: Nato Inlays Material: Dot Top Material: Laminated mahogany Back and Sides: Laminated mahogany Fingerboard material: rosewood Bridge Material: rosewood Binding Material: Ivory ABS Machine Heads: Chrome die cast Pickguard: none Rosette: artwork Special Electronics: optional
|
|
» Posted by: Wolfgang Musical Instrument (China) Limited [China] |
|
|
|
|
|
[Sell]
Monster Beats Dr.Dre Studio Headphone yellow ugg |
|
|
http://www.dayshopping.net/Beats-Studio-Headphone/pro-c1079.html Monster Beats Dr.Dre Studio Headphone yellow: 1.cheap wholesale sutdio headphone,Extreme Comfort is Music to Your Ears, Less Noise, More Music With Powered Isolation! Website:www.dayshopping.net 2. Price: Fair. the more you order, the cheaper price you get! Tell me how many you need, so I will give you the best price! 3. Payment: PayPal, Western Union, Money Gram, T/T, Credit Card. 4. Shipment: EMS, DHL, UPS 5. Delivery time: 5-7 days! 6. Guarantee: Customs Guarantee! If package is got by Customs, we can resend one free! any interest ,pls go to my website and email me. many thanks Website:www.dayshopping.net Email:dayshoppingnet@yahoo.com |
|
» Posted by: dayshoppingnet [China] |
|
|
|
|
|
[Sell]
linear scale |
|
|
Advantage: 1 manufacturer specializes in linear scale & dro 2 ODM & OEM 3 various models, thickness and demensions 4 high precision. Specifications: 1, Bar pitch: 0.02mm (50 line pairs/mm), 0.04mm (25 line pairs/mm) 2, Resolution: 0.0005mm, 0.001mm, 0.005mm, 0.01mm 3, Accuracy: +-0.003mm,+-0.005mm, +-0.008mm, +-0.01mm (20 °C 1000mm) 4, Reference mark: 1 ref. mark every 50mm or 100mm, distance-coded 5, Measuring lengths: 50mm to 1000mm 6, Output signal: TTL, HTL, EIA-422-A, 1Vpp, 11uApp 7, Max. speed of response: 30m/min, 60m/min, 120m/min 8, Operating temperature: 0 to 45°C 9, Storage temperature: -40 to 55°C Application: 2.All kinds of measuring mechanism instrument displacement measurement: spring testing machine three coordinate machine projector microscope. 2.All kinds of machine tool's digital display system: lathe milling machine grinder boring machine drilling machine wire-cutting spark machine, etc 3. All kinds of CNC machine tool supporting the use of: CNC milling machining center CNC grinding, etc 4. May meet PC PLC used in the various types of automatic mechanism of displacement measurement
|
|
» Posted by: Guizhou JaYa Machinery Co.,Ltd [China] |
|
|
|
|
|
[Sell]
1X128 Optical Switch |
|
|
1X128 Optical Switch anfiber.com,Anfiber company supply 1X128 Optical Switch, as a professional optical device manufacturer in the world, high quality and low price 1X128 Optical Switch in Shenzhen,China. Anfiber.com-1X128 Optical Switch is a kind of device ,with the ability of optical route switch. In optic fiber transmission system, it is used for optical route controlling, LAN, light source / detector changing, and protecting the change of Ethernet etc. In optical fiber test system, it is used for optical fiber and optical fiber device testing, network testing, open-air optical cable testing and optical fiber sensing. 1X128 Optical Switch Features More Than 128Channels Low Loss and High Reliability Parallel Interface (TTL) Modularized Design Epoxy-free on Optical Path 1X128 Optical Switch Applications Ring Network Remote Monitoring in Optical Network Testing of Fiber, Optical Component 1X128 Optical Switch series: 1x8 Optical Switch 1x10 Optical Switch 1x12 Optical Switch 1x16 Optical Switch 1x24 Optical Switch 1x32 Optical Switch 1x64 Optical Switch 1x128 Optical Switch 1X128 Optical Switch Parameters Insertion Loss dB 1<N≤12 16<N≤32 32<N≤64 64<N≤128 Typ:0.6 Max:0.8 Typ:0.8 Max:1.0 Typ:1.2 Max:1.5 Typ:1.7 Max:2.0 Wavelength Range nm 532~980(MM) 532~980(SM) 1260~1620(MM)1260~1620(SM) Operating Wavelength nm 650/780/850/980 650/780/850/980 1310/1490/1550/1625 1310/1490/1550/1625 Return Loss dB SM≥50、MM≥30 Crosstalk dB SM≥55、MM≥35 PDL dB ≤0.05 WDL dB ≤0.25 TDL dB ≤0.25 Repeatability dB ≤±0.02 Lifetime times 107 Transmission Power mW mW ≤500 Switch Time ms ≤10 Operating Temperature C -20~+70 Storage Temperature C -40~+85 Power Supply V +5 or 12 Dimension mm 1<N≤4 (135×40×32) 4<N≤12 (135×64×32)12<N≤16(184×78×36)16<N≤32(184×78×66) 32<N<88 (184×156×66) 88≤N≤128(184×220×66) The above is 1X128 Optical Switch,manufacturer provides straightly 1X128 Optical Switch partial information, if you have any question for 1X128 Optical Switch of the price, manufacturers, model, pictures, please contact us for 1X128 Optical Switch of the latest information. 1X128 Optical Switch series: 1x8 Optical Switch 1x10 Optical Switch 1x12 Optical Switch 1x16 Optical Switch 1x24 Optical Switch 1x32 Optical Switch 1x64 Optical Switch 1x128 Optical Switch |
|
» Posted by: www anfiber com [China] |
|
|
|
|
|
[Sell]
1X64 Optical Switch |
|
|
1X64 Optical Switch anfiber.com,Anfiber company supply 1X64 Optical Switch, as a professional optical device manufacturer in the world, high quality and low price 1X64 Optical Switch in Shenzhen,China. Anfiber.com-1X64 Optical Switch is a kind of device ,with the ability of optical route switch. In optic fiber transmission system, it is used for optical route controlling, LAN, light source / detector changing, and protecting the change of Ethernet etc. In optical fiber test system, it is used for optical fiber and optical fiber device testing, network testing, open-air optical cable testing and optical fiber sensing. 1X64 Optical Switch Features More Than 128Channels Low Loss and High Reliability Parallel Interface (TTL) Modularized Design Epoxy-free on Optical Path 1X64 Optical Switch Applications Ring Network Remote Monitoring in Optical Network Testing of Fiber, Optical Component 1X64 Optical Switch series: 1x8 Optical Switch 1x10 Optical Switch 1x12 Optical Switch 1x16 Optical Switch 1x24 Optical Switch 1x32 Optical Switch 1x64 Optical Switch 1x128 Optical Switch 1X64 Optical Switch Parameters Insertion Loss dB 1<N≤12 16<N≤32 32<N≤64 64<N≤128 Typ:0.6 Max:0.8 Typ:0.8 Max:1.0 Typ:1.2 Max:1.5 Typ:1.7 Max:2.0 Wavelength Range nm 532~980(MM) 532~980(SM) 1260~1620(MM)1260~1620(SM) Operating Wavelength nm 650/780/850/980 650/780/850/980 1310/1490/1550/1625 1310/1490/1550/1625 Return Loss dB SM≥50、MM≥30 Crosstalk dB SM≥55、MM≥35 PDL dB ≤0.05 WDL dB ≤0.25 TDL dB ≤0.25 Repeatability dB ≤±0.02 Lifetime times 107 Transmission Power mW mW ≤500 Switch Time ms ≤10 Operating Temperature C -20~+70 Storage Temperature C -40~+85 Power Supply V +5 or 12 Dimension mm 1<N≤4 (135×40×32) 4<N≤12 (135×64×32)12<N≤16(184×78×36)16<N≤32(184×78×66) 32<N<88 (184×156×66) 88≤N≤128(184×220×66) The above is 1X64 Optical Switch,manufacturer provides straightly 1X64 Optical Switch partial information, if you have any question for 1X64 Optical Switch of the price, manufacturers, model, pictures, please contact us for 1X64 Optical Switch of the latest information. 1X64 Optical Switch series: 1x8 Optical Switch 1x10 Optical Switch 1x12 Optical Switch 1x16 Optical Switch 1x24 Optical Switch 1x32 Optical Switch 1x64 Optical Switch 1x128 Optical Switch |
|
» Posted by: www anfiber com [China] |
|
|
|
|
|
[Sell]
Weighing Balances |
|
|
We make CS series Weighing Scales and CB series Weighing Balances. If you are interested in our products, please visit www.szkhj.com, thanks very much. |
|
» Posted by: Kehuijie International Enterprises Limited [China] |
|
|
|
|
|
[Sell]
Weighing Scales |
|
|
A complex of weighing scale and calculator Multiple weighing units (g,oz,ozt,ct,dwt,gn,tl) Capacity/Accuracy:100g/0.01g, 200g/0.01g, 300g/0.01g, 500g/0.1g, 1000g/0.1g Unique handhold design with large LCD Excellent load cell Backlight display Auto power off function Auto calibration Count function Low battery indicator Overload indicator Stainless steel weighing pan (50x60mm) Two AAA (1.5Vx2) alkaline batteries Dimension: 120x70x20mm |
|
» Posted by: Kehuijie International Enterprises Limited [China] |
|
|
|
|
|
[Sell]
subwoofer - EEA200-05B |
|
|
We sales woofer,speaker,loudspeaker,subwoofer and other acoustic components.We keep our prices low and quality is excellent and quick delivery, provide comprehensive product information.we are chinese exporter. |
|
» Posted by: Changzhou Esuntech Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
HD/3G-SDI Fiber Optic Transmission System |
|
|
HD/3G-SDI Fiber Optic Transmission System HDT/R-S1001/S-20KM Description HD/3G-SDI Video Fiber Optic Transmission System could transmit SDI signal (1.48Gbps-2.97Gbps) over extended distances, the SDI signal could be embedded audio and control data, SDI signal auto recognition, not need to select by hand, goes beyond the reach of traditional coaxial cable. Advantage  1 channel digital, uncompressed and real-time HD-SDI Video  1 channel RS-485 (RS-232/RS-422) control data  Support SMPTE 259M / SMPTE 344M  Support embedded audio  HD-SDI/3G-SDI optional  Without software pre-set, plug and play  Stand-alone, 1U rack mount or 4U rack mount (optional).  More power supply and LED indicator light Application It is widely used in HD CCTV, HDTV, Large LED display ,Traffic controlling, AV recreation center, Sports ground, Multimedia conference system, Military exercises control system, Security monitoring system, Intelligent transportation system, Water conservancy, Oil industry, Chemical industry, Aerospace industry, Customs, Airport, Port, Prison, Museum, Hotel, and etc.
|
|
» Posted by: Shenzhen Huatiancheng Technology Co.,Ltd [China] |
|
|
|
|
|
[Sell]
Mirror polishing electronic mould |
|
|
Electronic Accessories Mould AIVO MOULD CO., LTD (Email: sales@aivo-mould.com; MSN: aivo-mould@hotmail.com; Skype: aivo-mould) can make all kinds of electronic accessories mould according to customer' s requirements. After got the drawing or samples, we will quote within 36 hours. Our moulds are both excellent in quality and reasonable at price. Specifications of electronic accessories mould: 1. Quick Details of electronic accessories mould: Brand Name: AIVO MOULD Shaping Mode: Plastic Injection Mould Product Material: Steel Product: Plastic Injection Electronics Accessories Quality Certificate: ISO:9001 2000 Cavity: Single or Multi Drawing files: PROE/UG/AutoCAD/Solidwork etc Part Material: PP, ABS, PC, PE, Nylon, etc Surface Treatment: Texture, Polish, etc Facilities: CNC, Grinding, Milling, Lathe, EDM machine Mold Steel: P20/H13/718H/2738, NAK80/S136 Applications: Electronics, Packaging, Industrial Mould Base: LKM/DME/HASCO/FUTABA, etc 3. Our advantage: a.Best design, competitive price b.10 years Rich experience worker c.Professional in design & making plastic mould d.One stop solution mould e.On time delivery f.Best after-sale service g.Specialized in kinds of plastic mould 4. Other Information: Product/Service (We Sell): plastic Moulds, Household Moulds, Auto Part Moulds, Injection Moulds, double color mould, moulds, household molding, auto molding, plastic molding, injection molding, electric mould, commodity mould, auto parts mould, home appliance mould, etc. Aivo Mould Co., Ltd Web: www.aivo-mould.com Mail: sales@aivo-mould.com MSN: aivo-mould@hotmail.com Skype: aivo-mould
|
|
» Posted by: Aivo Mould Co., Ltd [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 next»
|
|
|