|
|
|
|
|
|
|
[Sell]
Celestial Fairy fish road sequins 4 g 10 g |
 |
|
| With good stroke and long throw, the hook position can be adjusted according to the specific fish or the hook product can be added to the left and right half rotation swimming style, with good swinging posture in the water. Low air resistance and better long-range performance than ordinary sequins. Porous design, good identification from different angles, good attraction to fish. Sequins can also add side gullies and other operations to deal with different fish (each kind of fish bite the bait in different ways, different hook positions, different fish rate) |
|
» Posted by: Huapinchuhai [China]  |
|
|
|
|
|
[Sell]
Celestial transfiguration sequin 2.8g multi-pose multi-shape Luya |
|
|
| The position of the hook can be adjusted or the hook can be added according to the specific fish. High speed, then perpendicular to the direction of the sequin high speed swing. The appropriate speed can be chosen according to the species. Sequins can also add side grooves and other operations to deal with different fish (each fish bite the bait in different ways, different hook positions, different fish rate) |
|
| » Posted by: Huapinchuhai [China] |
|
|
|
|
|
[Sell]
Copper coated steel pipe |
|
|
| Copper plated steel tube is made of high quality seamless tube, and the electrolytic copper molecules with 99.9% content are uniformly covered on the low carbon steel core, so that the copper and steel core are fully bonded. It has the characteristics of thick copper layer, good adhesion and non - stripping. Its advantages are large tensile strength, strong corrosion resistance (can guarantee service life in more than 50 years). Copper-plated steel tubes are highly protective after being buried underground, either through natural corrosion or electrochemical reaction. The copper plated steel tube and the grounding wire are welded by hot flux, so that the grounding device is completely protected by copper, which makes it a real maintenance-free grounding device. Copper plated steel tube specification model: Product name: Diameter length copper thickness mm copper coated steel tube ZH-GW-R50 50 3-6m/ piece Customizable ZH-GW-R60 60 ZH-GW-R80 80 |
|
| » Posted by: Huapinchuhai [China] |
|
|
|
|
|
[Sell]
Copper plating Angle |
|
|
| Copper-plated Angle steel is produced by electroplating process, which realizes the high combination of copper and steel. The outer copper layer is composed of 99.99% electrolytic copper molecules, which not only overcomes the defects of galvanic cell reaction in the casing process, but also solves the defects such as insufficient purity of the copper layer and the Yin and Yang of the surface copper layer in the hot dip continuous casting process. Feature 1: Excellent anticorrosive copper plated round steel material indicates that the copper layer is thick and 99.99% electrolytic copper molecules, with an average thickness of more than 0.25mm, have strong corrosion resistance and a service life of more than 50 years. Feature 2: Better conductivity Copper plated round wire because the surface copper layer is composed of 99.99% electrolytic copper molecules, so it has excellent conductivity, its own resistance is far lower than conventional materials. Feature 3: Wider application Range The product is suitable for soil conditions with different humidity, temperature and PH value. Feature 4: Safe and quick installation of copper clad steel circular wire, complete fittings, special connection pipe or exothermic welding connection, solid joint, convenient installation, greatly improving the construction efficiency. Feature 5: Construction cost reduction Compared to the traditional use of pure copper grounding, the cost has been greatly reduced. Copper plating Angle steel L50*50*5, L63*63*6 application range: petrochemical industry, oil storage depot, power plant, substation, communication base station, airport, network room and other places of lightning protection grounding engineering |
|
| » Posted by: Huapinchuhai [China] |
|
|
|
|
|
[Sell]
Hot flux exothermic welding die |
|
|
| The method of hot flux welding is to use the reaction between compounds to produce high temperature, the molten metal through the investment mold to reach the welding site and form a certain shape, size to meet the requirements of the process of permanent joint. This method allows welding between copper and copper, copper and steel, copper and galvanized steel, the same metal or different metals. In order to weld between different specifications and different types of conductors, a special mold is made for welding. The two ends of the conductors need to be welded are fixed in a mold. Hot flux is put in and the ignition powder is ignited. The reaction produces a high temperature to melt the powder into a liquid. Our company for different hot flux specifications, the corresponding supporting mold. The current-carrying capacity of the fusion junction is the same as that of the conductor, with good conductivity. After testing, the change of dc resistance ratio before and after welding is close to zero. This is any kind of traditional connection can not be compared. 2. Good mechanical properties because it is a melt joint, so the joint and the conductor is a molecular bond, is a permanent joint. 3. The impact resistance stability test shows that the conductor melts before the joint under the impact of a short period of large current, so it will not be damaged by the surge current. 4. Strong corrosion resistance Due to the melt joint, no contact indicates, no residual stress, and the joint is covered with pure copper, thus greatly enhancing the corrosion resistance of the conductor. 5. There is no need for external energy, special equipment or professional operators to freely regulate the reaction temperature. It can be operated indoors or outdoors, and the whole connection process can be completed in a short time. 6. Simple and safe connection according to the metal characteristics of the welded conductor, different reaction temperatures can be configured to make the welded joint stronger and more perfect. Product specifications: Hot melt flux ZH-EW-F65 according to the welding conductor and mold configuration corresponding flux model ZH-EW-F90 90# ZH-EW-F150 150# ZH-EW-F200 200# ZH-EW-F250 250# ZH-EW-F300 300# Mold ZH-EW-CS Welding accessories point musket according to the required welding body connection Zh-ew-mp ignition device For more welding problems can call us, we will provide professional services. |
|
| » Posted by: Huapinchuhai [China] |
|
|
|
|
|
[Sell]
Electrolytic ion grounding electrode |
|
|
| The ion earthing system is composed of advanced sustained-release earthing electrode (including reversible sustained-release filler), initiator and enhanced electrolytic ion filler. The surface of the electrode is red copper alloy to ensure the highest electrical conductivity and long service life, and with two kinds of fillers inside and outside, the fillers are non-toxic compounds, no pollution to the environment. It has been proved by experiments that the direct cause of high soil resistivity is the lack of auxiliary conductivity of free ions. The filler outside the earthing conductor is the material with strong water absorption, strong adsorption and high cation exchange ability as the main body, with a long term, resistance reduction, corrosion resistance, high coefficient of expansion is not affected by temperature changes, high voltage impact resistance of a variety of chemical materials as auxiliary materials. It is mainly used to solve the problems of humidity, ion generation content, corrosion protection and so on around the grounding conductor, so that the conductor and the earth are closely connected, which reduces the contact resistance between the electrode and the soil, improves the resistivity of the surrounding soil, and effectively enhances the lightning conductivity release ability. The inside of the conductor is filled with special ionic compounds that fully absorb moisture from the air. Through the delisting action, the active electroions can be effectively released into the soil and interact with the moisture in the soil and the air, which can further promote the external slow release and drag reduction of the conductor, and keep the resistance value stable for a long time. The compounds in the conductor gradually combine into a colloidal transparent state over time. We make use of the conductive property of colloidal compounds, so that the whole system can be in the state of ion exchange for a long time, thus forming an ideal electrolytic ion grounding system. Electrolytic ion grounding electrode specification model: product model diameter length material impact current PH value mm mm R electrolytic ion grounding electrode ZH-CGES50 50 1500 copper tube ≤1% 7±5% copper tube ≤1% 7±5% copper tube ≤1% 7±5% 3000 copper tube ≤1% 7±5% * If there are other requirements please contact the factory for more information about products and services. Construction method: 1. Drill a hole with a diameter of about 30cm with a depth of 1.5-3.5m (slightly longer than the length of ion earthing rod) depending on the type used. 2. 3. Connect the ground wire to the wiring end of the cover end of the ion ground rod, and tear off the adhesive tape on the ion exchange hole of the cover end; 4. Place the ion grounding electrode in the hole, and fill the remaining backfill agent into the gap in the hole; 5. In case of multiple construction, connect all the roots with horizontal grounding wires; One will lead to the ground test point; 6, test, meet the requirements, return earth tamping. 7. Complete the construction. |
|
| » Posted by: Huapinchuhai [China] |
|
|
|
|
|
[Sell]
Copper plated steel strand copper clad steel strand |
|
|
| 15-60 yuan/meter. Copper clad steel strand property: The single wire and strand of electroplated copper coated steel are new composite materials made by electroplating the electrolytic copper molecules with 99.9% content to the core of high quality low carbon steel. The product has not only the strength and toughness of steel, but also the good conductivity and corrosion resistance of copper. The products are widely used in high-frequency coaxial cable, steel wire communication, electrified railway, subway light rail, power and petrochemical system grounding line. Compared with copper strand, it has the advantages of low density, high strength and low cost. Application: the products are widely used in high-frequency coaxial cable, steel wire communication, electrified railway, subway light rail, power and petrochemical system grounding line. Specification and model: Cable diameter (Mm2) ZH10C 10 7/1.4 0.085664 10.78 4.2 ZH 16C 16 7/1.7 0.126311 15.89 5.1 ZH 25C 25 7/2.1 0.203000 24.94 6.4 ZH30C 30 7/2.3 0.231205 29.096.9 ZH35C 35 7/2.5 0.280000 35.19 7.6 ZH50C 50 19/1.8 0.39000 49.97 9 ZH70C 70 19/2.1 0.545000 70.27 10.5 ZH95C 0.758000 93.26 12.5 ZH120C 120 19/2.8 0.953066 120.36 14.2 ZH150C 150 37/2.3 1.220000 147.11 16 ZH185C 185 37/2.5 1.503000 184.54 17.7 ZH240C 240 37/2.8 1.970000 232.73 19.8 ZH300C 300 37/3.2 2.405000 299.43 22.5 |
|
| » Posted by: Huapinchuhai [China] |
|
|
|
|
|
[Sell]
Copper plating round steel |
|
|
| Copper coated steel circular line is also known as copper plated round steel, copper coated round steel, etc. It is divided into two types: straight line, generally 6 meters/root, rolled into a disk, generally 100 meters/disk. Product features: copper clad steel grounding round wire is made by electroforming technology, a new type of grounding body, and adopts the most advanced technology will be 99.9% purity electrolytic copper cover to the surface of special steel core made of conductive performance is excellent, but the cost is much lower than pure copper, anti-corrosion performance is far better than galvanized steel, has good conductivity, low resistance, anticorrosion performance is superior, transportation convenience, construction is convenient, high efficient construction, a lot of advantage, is instead of round steel, Angle steel, galvanized flat steel, etc. The best choice of the traditional ground material. Application: it is suitable for the grounding, protection grounding, lightning protection grounding and anti-static grounding of horizontal earthing body in general environment and special environment where chemical corrosive medium is produced in wet, saline and acidic soil pole. Copper plated round steel wire zH-GW-R10, 10 6m/ root, 100m/ disk ZH-GW-R12, 12 ZH-GW-R13.2, 13.2 ZH-GW-R14, 14 ZH-GW-R16, 16 copper plated steel wire, copper clad steel wire. |
|
| » Posted by: Huapinchuhai [China] |
|
|
|
|
|
[Sell]
Tin-plated copper flat steel |
|
|
| 25-80 yuan/m tinned copper conductor, tin plated copper flat steel is first coated with a layer of electrolytic copper, tin and then in the copper layer surface electroplating, the process to ensure the permanent between tin and copper layer and steel reinforced molecular combination, no physical defects such as cracks, ensure the conductor of oneness, when installing a laying effectively prevent become warped, craze, fall off wait for a circumstance; Tin plated copper flat steel can effectively prevent the oxidation reaction of copper layer because of the tin layer on the surface, which is beneficial to enhance the anti-corrosion performance of the ground conductor and increase the service life of the whole ground network. At the same time, because the surface color of tin-plated copper conductor is similar to that of ordinary galvanized material, it is not easy to be distinguished, and it is not easy to be considered as precious metal when used in outdoor, so it is not easy to be lost. Zh-gw-f304s 30*4mm 6M ZH-GW-F404S 40*4mm 6m ZH-GW-F505s 50*5mm 6m ZH-GW-F606s 60*6mm 6m |
|
| » Posted by: Huapinchuhai [China] |
|
|
|
|
|
[Sell]
Copper plated flat steel copper clad flat steel |
|
|
| 1. Manufacturing process characteristics: Electroplating process is adopted to realize the high combination of copper and steel. The outer copper layer is composed of 99.99% electrolytic copper molecules, which not only overcomes the defects of galvanic cell reaction in the casing process, but also solves the defects such as insufficient purity of the copper layer and the Yin and Yang of the surface copper layer in the hot dip continuous casting process. 2. The excellent anticorrosive materials show that the copper layer is thick and 99.99% electrolytic copper molecules, so the corrosion resistance is strong and the service life is more than 50 years. 3. Better Conductivity As the surface copper layer is composed of 99.99% electrolytic copper molecules, it has excellent conductivity and its own resistance is far lower than that of conventional materials. The product is suitable for soil conditions with different humidity, temperature and PH value. 5. The installation of safe and fast accessories is complete, the use of special connection pipe or hot-melt flux connection, joint firm, convenient installation, greatly improve the construction efficiency. 6. Reduced construction cost. Compared with the traditional grounding with pure copper material, the cost has been greatly reduced. Copper plated flat steel size specification weight copper plated thickness mm kg Copper plated flat steel ZH-GW-F425 3*30 0.7065 ZH-GW-F430 4*30 0.9420 ZH-GW-F440 4*40 1.2560 ZH-GW-F450 4*50 1.5700 ZH-GW-F550 5*50 1.9625 ZH-GW-F650 6*50 Application scope: lightning protection grounding engineering for petrochemical industry, oil storage depot, power plant, substation, communication base station, airport, network machine room and other places. |
|
| » Posted by: Huapinchuhai [China] |
|
|
|
|
|
[Sell]
Copper plated ground rod |
|
|
| 17 yuan -150 yuan per root. The electroplated copper earthing rod produced by our company is used to cover the electrolytic copper molecules with 99.9% content uniformly on the low carbon steel core, so that the copper and the steel core are fully bonded. It has a thick copper layer, good adhesion, not peeling (can be rolled thread) and other characteristics. Its advantages are large tensile strength, strong corrosion resistance (can guarantee service life in more than 50 years). Electroplated copper earthing rod has strong protection both in natural corrosion and electrochemical reaction after deep underground. The earthing rod and earthing wire are welded by hot flux, so that the earthing device is completely protected by copper, which makes it a true maintenance-free earthing device. 1. Copper layer thickness ≥0.254mm (UL standard ≥0.254mm) 2. Flatness error ≤1mm/m 3. Plasticity of copper layer: The ground rod (wire) is bent into A U shape, and there is no crack on the inner and outer edge of the bending Angle; 4. Copper binding degree: The adhesion test showed that the copper layer was peeled off at the jaw bite of the vise, and the rest copper and steel were well combined. No strip size of existing combined thread earthing rod Product name type Thread Copper plating thickness mm mm Combination copper earthing rod ZH-GR14.2*1200 mm 16 ZH-GR17.2*1200 3/4 ZH-GR18*1200 M 18 ZH-GR20*1200 M 20 Fitting Size Product Name type Material Remarks Driving head Q0058 steel or percussion head for protection of earthing rod when hammer earth rod Connectors L0058 brass for connection between combined earthing rods L0034 L0016 L0018 L0020 bit Z0058 steel for combined earthing rods for drilling into the ground Z0034 Z0016 Z0018 Z0020 Note description Copper plated grounding rod ZH-GR14.2*1500 0.254 single root type grounding rod, one end flat and one end pointed specification model and copper layer thickness can be customized. Single root type ground rod, one end flat and one end pointed specifications and copper thickness can be customized. Zh-gr18 *2500 0.254 ZHGR20*1500 For other requests, please contact the factory for more information about products and services. |
|
| » Posted by: Huapinchuhai [China] |
|
|
|
|
|
[Sell]
Buddhist articles for incense burner pure copper incense burner sandalwood incense burner bamboo stick incense burner for buddhist temple hall |
|
|
| 4 "tall 9.2 cm, diameter 8 cm, diameter 12 cm. 5 "tall 10.5 cm, diameter 9.5 cm, diameter 14.5 cm. 6 "high 12.5 cm, diameter 12 cm, diameter 17.5 cm. 7 "tall 13.5 cm, diameter 14 cm, diameter 20 cm. The 8 "height is 14.5 cm, the diameter is 16 cm, the diameter is 22.5cm. The pure copper incense drawing process is fine |
|
| » Posted by: Huapinchuhai [China] |
|
|
|
|
|
[Sell]
The new trend nine - minute Hong Kong style versatile straight leg casual wide-leg pants |
|
|
| Very japanese-style pants, simple wide-leg pants to enhance daily aura, using viscose rayon fabric, thin and breathable easy to handle, with a simple coat is very brilliant. |
|
| » Posted by: Huapinchuhai [China] |
|
|
|
|
|
[Sell]
Summer solid-color pocket trim cotton T-shirt with loose round collar and half sleeve hem |
|
|
| The whole cotton knitted material is selected. The neckline, sleeves and hem are designed with contrasting colors to make the garment full of vitality in a calm and stable manner. The garment is divided into layers. |
|
| » Posted by: Beijing Huapinchuhai Technology Co. LTD [China] |
|
|
|
|
|
[Sell]
Summertime trendy graphic print casual bottom round neck T-shirt |
|
|
| This T-shirt is made of light cotton knitted material, and the shoulder-falling design can be matched with the T-shirt or shirt, with rich layering feeling. The printing pattern on the back is very design feeling, which is languidly casual and can easily control various pants |
|
| » Posted by: Beijing Huapinchuhai Technology Co. LTD [China] |
|
|
|
|
|
[Sell]
New cartoon graffiti T-shirts for both men and women |
|
|
| There is no redundant or complicated process. Materials with different properties are spliced together. Abstract printing brings artistic tension |
|
| » Posted by: Beijing Huapinchuhai Technology Co. LTD [China] |
|
|
|
|
|
[Sell]
2020 New trendy male Yuppie slung trousers |
|
|
| It is a very handsome knitted baggy pants with elastic waist rope design, loose low profile, free and random. The fabric is pure cotton knitted, which is very comfortable to wear next to the body. It can be matched with simple boots, which makes it look like a very spontaneous ranger. |
|
| » Posted by: Beijing Huapinchuhai Technology Co. LTD [China] |
|
|
|
|
|
[Sell]
The new Korean version of the trend in 2020 relaxed casual radish pants |
|
|
| A simple knit pants, pure cotton material, there is a certain thickness and pendant degree, low slightly, the tolerance of the leg shape is larger, can be matched with the coat of loose form, up and down loose state more lazy and relaxed. |
|
| » Posted by: Beijing Huapinchuhai Technology Co. LTD [China] |
|
|
|
|
|
[Sell]
The new South Korean version of the trend of small leg pants slim-fit leg pants |
|
|
| This halon pants is easy to wear and is very inclusive to the body shape. The gear is a little low, with smooth stitching lines. The comfort of high-quality pure cotton knitting is excellent, which makes it very slim and easy to match |
|
| » Posted by: Beijing Huapinchuhai Technology Co. LTD [China] |
|
|
|
|
|
[Sell]
2020 new line decorative comfortable cotton T-shirt |
|
|
| 2020 new line decorative comfortable cotton T-shirt |
|
| » Posted by: Beijing Huapinchuhai Technology Co. LTD [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 next»
|
|
|
