|
|
|
|
|
[Sell]
PET-polyethylene terephthalate |
|
|
PET (polyethylene terephthalate) Parameter Unit Grade PET 4 PET3 PET 2 PET 1 I.V. dL/g 0.80 ± 0.020 0.820 ± 0.020 0.770 ± 0.020 0.870 ± 0.020 DEG % 1.40 ± 0.30 1.40 ± 0.30 1.20 ± 0.30 1.10 ± 0.30 – COOH mmol/kg ≤ 35 ≤ 35 ≤ 35 ≤ 35 AA ug/g ≤ 1.0 ≤ 1.0 ≤ 1.0 ≤ 1.0 Color value L / ≥ 80 ≥ 80 ≥ 80 ≥ 80 B / ≤ 1.0 ≤ 1.0 ≤ 1.0 ≤ 1.0 Powder mg/kg ≤ 100 ≤ 100 ≤ 100 ≤ 100 Melting point °C ≥ 240 ≥ 240 ≥ 245 ≥ 240 Density g/cm3 1.40 ± 0.01 1.40 ± 0.01 1.40 ± 0.01 1.40 ± 0.01 Moisture % ≤ 0.2 ≤ 0.2 ≤ 0.2 ≤ 0.2 Ash % ≤ 0.08 ≤ 0.08 ≤ 0.08 ≤ 0.08 Package: 25KG PP bag or as buyer's request
|
|
» Posted by: Qingdao Volterra Plastic&Rubber Material Import&Export Ltd [China] |
|
|
|
|
|
[Sell]
PA6 |
|
|
PA6 PA6 property data sheet (ITEM) (UNIT) (STANDARD) GF30 Tensile Strength MPa ISO 527-2 170 Tensile Elongation % ISO 527-2 2 Flexural Strength MPa ISO 178 225 Flexural Module MPa ISO 178 8000 Charpy Notch Impact KJ/m2 ISO 179-1 17 Izod Notch Impact KJ/m2 ISO 180 18 Mass Density g/cm3 ISO 1183 1.37 H.D.T °C ISO 75 220 Package: 25KG BAG OR as buyer's request
|
|
» Posted by: Qingdao Volterra Plastic&Rubber Material Import&Export Ltd [China] |
|
|
|
|
|
[Sell]
PVC RESIN |
|
|
Product: PVC RESIN Appearance:White Flake or Blocks or Powder Usage: It is used in the insulation material of PVC tube, panel, hard transparent sheet, foil, disc, PVC monofilament, blow molding product, appliance insulation material. Type SG1 SG2 SG3 SG4 SG5 SG6 SG7 Viscosity,ml/g(or K value) 156-144 (77-75) 143-136 (74-73) 135-127 (72-71) 1350-1250 126-119 (70-69) 1250-1150 118-107 (68-66) 1100-1000 106-96 (65-63) 950-850 95-87 (62-60) 850-750 Number of Impurity Partical max. 30 30 30 30 30 30 40 Volatiles Content%, max. 0.4 0.4 0.4 0.4 0.4 0.4 0.4 Appearing Density, g/ml, min. 0.42 0.42 0.42 0.42 0.42 0.45 0.45 Number of Grain/400cm2 max. 40 40 40 40 40 40 40 Plasticizer Absorbency Value of 100g Resin 25 25 25 22 19 16 14 Whiteness %, min 74 74 74 74 74 74 70 Water Extractant Solution Conductivity, s/m max. 0.005 0.005 0.005 Residule Chlore Thylene Content, mg/kg, max. 5 5 5 5 5 5 5 Ethylidence Chloride mg/kg max. 150 150 150 150 150 150 150 Packing: 25kg in net PP bag, 20MT in the 20'FCL
|
|
» Posted by: Qingdao Volterra Plastic&Rubber Material Import&Export Ltd [China] |
|
|
|
|
|
[Sell]
LDPE |
|
|
LDPE CAS:9002-88-4 Products Form Color: Milky white Shape: Round granular Physical Properties LDPE has good toughness, low temperature resistance,creep, and large thermal expansion. LDPE is easy to process molding, can be extrusion, blow molding. Item LDPE Density(g/cm3) 0.92 Tension strength/Mpa 18 Elongation/% 1000 Embrittlement temperature℃ -35 Melting Point/℃ 155 Package: 25KG pp bag or as buyer's request
|
|
» Posted by: Qingdao Volterra Plastic&Rubber Material Import&Export Ltd [China] |
|
|
|
|
|
[Sell]
EPS--EXPANDABLE POLYSTYRENE |
|
|
EPS (EXPANDABLE POLYSTYRENE) INSPECTION UNIT SPEC RESULTS BEAD SIZE WT% MIN.95.00 99.4 BLOWING AGENT WT% MIN.6.00 6.86 MOISTURE WY% MAX.1.00 0.43 PRE-EXPANSION DENSITY KG/M3 MAX.15.0 13.5 BEAD DISTRIBUTION DIAMETER,MM 1.41 +1.19 +1.00 +0.90 +0.84 +0.71 +0.60 + 0.50 PAN PERCENTAGE 0.0 0.1 9.8 41.5 24.2 24.1 0.3
|
|
» Posted by: Qingdao Volterra Plastic&Rubber Material Import&Export Ltd [China] |
|
|
|
|
|
[Sell]
EVA |
|
|
EVA Raw material EVA virgin9% Performance of projects Test condition Testing method Test data Data unit Basic properties VA content SGC 9 % Melt Flow Index 190°C ASTM D-1238 2.0 G/10min Density ASTM D-1505 0.938 G/m³ Mechanical properties Tensile Elongation at Break ASTM D-638 290 Kg/m2 Hardness ASTM D-2240 38 Shore D Flexural Modulus ASTM D-747 500 Kgm2 Tensile Yield Strength ASTM D-638 290 Kg/m2 Tensile Fracture Strength ASTM D-638 800 % Thermal properties Brittle Temperature ASTM D-746 -70 °C Melting point SGC 93 °C Softening point ASTM D-1525 64 °C
|
|
» Posted by: Qingdao Volterra Plastic&Rubber Material Import&Export Ltd [China] |
|
|
|
|
|
[Sell]
PP |
|
|
PP-Polypropylene Injection Grade Attributes: High Stiffness Applicant: General Houseware Properties Data Sheet Properties Test Method Data Melt Flow Rate 230∩, 2.16kg D-1238 8.0 g/10min Density D-1505 0.9g/Р Mold Shrinkage HPC Method 1.60% Tensile Strength at Break D-638 350kg/Р Ultimate Elongation D-638 >100 % Flexural Modulus of Elasticity D-790 15,000 kg/Р Hardness D-648 115 R IZOD Impact Strength 23∩ D-256 3.0 kg.cm/cm Heat Resistance 130∩ Air Oven <500 Hour Heat Distotion 4.6kg/Р D-648 105 ∩
PACKAGE: 25KG BAG OR AS BUYER'S REQUEST
|
|
» Posted by: Qingdao Volterra Plastic&Rubber Material Import&Export Ltd [China] |
|
|
|
|
|
[Sell]
ABS |
|
|
ABS Property Unit Test Method Test Condition AG12A0 Tensile Strength kg/cm2 ( MPa) ASTM D-638 ( ISO527) 23℃ 510 (50) Flexural Strength kg/cm2 ( MPa) ASTM D-790 ( ISO178) 23℃ 750 (74) Flexural Modulus kg/cm2 ( MPa) ASTM D-790 ( ISO178) 23℃ 25000 (2450) Rockwell Hardness  R-Scale ASTM D-785 ( ISO2039/2 ) 23℃ R-106 Izod Impact Strength kg-cm/cm ( J/m ) ASTM D-256 ( ISO R180 ) 23℃ 1/4'' bar 30 (294) Vicat Softening Temperature ℃ ASTM D-1525 (ISO 306) 1Kg load 103 Heat Deflection Temperature ℃ ASTM D-648 (ISO 75/A) Unannealed 18.6kg/cm2 ( 1/2'' bar ) 88 Annealed ( 80℃×8Hr ) 100 Melt Flow Index g/10 min ASTM D-1238 ( ISO1133 ) 200℃×5Kg ( 49N ) 1.6 220℃×10Kg ( 98N ) 17 Molding Shrinkage % FCFC Method 23℃ 0.4~0.7 Specific Gravity   ASTM D-792 ( ISO1183 ) 23℃/23℃ 1.04 Flammability UL-94 FILE NO. E162823 1/16" HB All Color Application for Toys, Shoe heels, Clock housing, Stereo housing, Suitcase, Plates, Refrigerator liner. Package: 25KG PP bag or as buyer's request |
|
» Posted by: Qingdao Volterra Plastic&Rubber Material Import & Export Ltd [China] |
|
|
|
|
|
[Sell]
PBT-polybutylece terephthalate |
|
|
PBT property data sheet Test Items Unit pecification Density g/cm3 1.25~1.35 Melting Rang 210~230 Melting Index g/10min 7.0~15.0 Submit strength Mpa ≥50 Submit Elongation 5.0~10.0 Elongation at break ≥100 Hardness ≥70 Appearance mm 3×4 Packnng 900kg 1200mm*1200mm*1000mm 25kg 800mm*500mm*200mm Viscosity Di/g ≥1.25 Package: 25KG PP bag or as buyer's request
|
|
» Posted by: Qingdao Volterra Plastic&Rubber Material Import & Export Ltd [China] |
|
|
|
|
|
[Sell]
POM-Polyoxymethylene |
|
|
POM-----Polyoxymethylene 1.UL 94 HB 2.MFI: 27.0 G/10min 3.Melting point: 165 POM Features: Low viscosity, thermal stability, the middle class mobility, generally for use in molding. performance of project technical data test conditions method of test test unit water absorption 23.C 60% RH ASTM D-570 0.22% MeltFlowRate--- ASTM D-1237 27.0 G/10min Theproportionofthe physical properties --- ASTM D-792 1.41 --- Mechanical properties of tensile strength 23 °C ASTM D-638 62.3 MPa tretching the length 23 °C ASTM D-638 50% Flexural strength 23 °C ASTM D-790 91.2 MPa Bending modulus of 23 °C ASTM D-790 2.62 GPa Tear strength 2mm ASTM D-732 54.9 MPa IZODimpactstrengthofthe3.2mm ASTM D-256 54 J / m Tensilestrength1.6mm ASTM D-1822 98 KJ/m2 Color: any color as you require Package: standard 25 KG/BAG
|
|
» Posted by: Qingdao Volterra Plastic&Rubber Material Import & Export Ltd [China] |
|
|
|
|
|
[Sell]
PA66 |
|
|
PA66 PA66 GF30 property data sheet ITEM Test method unit PA66 GF30 Color Black Proportion 1183 g/cm3 1.29 Heat resistance (continuous) ℃ 120 Heat resistance (short-term) ℃ 240 Melting point ℃ 255 Linear thermal expansion coefficient (average 23-100°C) m/(m.k) 50×10-6     - (average 23-150°C) m/(m.k) 60×10-6 Flammability (UL94) 4589 HB Water absorption (dipping into water at 23℃ for 24H) 62 % 0.39 -( dipping into water at 23℃) 62 % 5.5 Bending tensile stress/ Tensile stress off shock 527 MPa -/100 Breaking tensile strain 527 % 5 Tensile modulus of elasticity 527 MPa 5900 Package: 25KG PP bag or as buyer's request |
|
» Posted by: Qingdao Volterra Plastic&Rubber Material Import & Export Ltd [China] |
|
|
|
|
|
[Sell]
PET-polyethylene terephthalate |
|
|
PET (polyethylene terephthalate) Parameter Unit Grade PET 4 PET3 PET 2 PET 1 I.V. dL/g 0.80 ± 0.020 0.820 ± 0.020 0.770 ± 0.020 0.870 ± 0.020 DEG % 1.40 ± 0.30 1.40 ± 0.30 1.20 ± 0.30 1.10 ± 0.30 – COOH mmol/kg ≤ 35 ≤ 35 ≤ 35 ≤ 35 AA ug/g ≤ 1.0 ≤ 1.0 ≤ 1.0 ≤ 1.0 Color value L / ≥ 80 ≥ 80 ≥ 80 ≥ 80 B / ≤ 1.0 ≤ 1.0 ≤ 1.0 ≤ 1.0 Powder mg/kg ≤ 100 ≤ 100 ≤ 100 ≤ 100 Melting point °C ≥ 240 ≥ 240 ≥ 245 ≥ 240 Density g/cm3 1.40 ± 0.01 1.40 ± 0.01 1.40 ± 0.01 1.40 ± 0.01 Moisture % ≤ 0.2 ≤ 0.2 ≤ 0.2 ≤ 0.2 Ash % ≤ 0.08 ≤ 0.08 ≤ 0.08 ≤ 0.08 Package: 25KG PP bag or as buyer's request
|
|
» Posted by: Qingdao Volterra Plastic&Rubber Material Import & Export Ltd [China] |
|
|
|
|
|
[Sell]
PVC RESIN |
|
|
Product: PVC RESIN Appearance:White Flake or Blocks or Powder Usage: It is used in the insulation material of PVC tube, panel, hard transparent sheet, foil, disc, PVC monofilament, blow molding product, appliance insulation material. Type SG1 SG2 SG3 SG4 SG5 SG6 SG7 Viscosity,ml/g(or K value) 156-144 (77-75) 143-136 (74-73) 135-127 (72-71) 1350-1250 126-119 (70-69) 1250-1150 118-107 (68-66) 1100-1000 106-96 (65-63) 950-850 95-87 (62-60) 850-750 Number of Impurity Partical max. 30 30 30 30 30 30 40 Volatiles Content%, max. 0.4 0.4 0.4 0.4 0.4 0.4 0.4 Appearing Density, g/ml, min. 0.42 0.42 0.42 0.42 0.42 0.45 0.45 Number of Grain/400cm2 max. 40 40 40 40 40 40 40 Plasticizer Absorbency Value of 100g Resin 25 25 25 22 19 16 14 Whiteness %, min 74 74 74 74 74 74 70 Water Extractant Solution Conductivity, s/m max. 0.005 0.005 0.005 Residule Chlore Thylene Content, mg/kg, max. 5 5 5 5 5 5 5 Ethylidence Chloride mg/kg max. 150 150 150 150 150 150 150 Packing: 25kg in net PP bag, 20MT in the 20'FCL |
|
» Posted by: Qingdao Volterra Plastic&Rubber Material Import & Export Ltd [China] |
|
|
|
|
|
[Sell]
PP-Polypropylene |
|
|
PP-Polypropylene Injection Grade Attributes: High Stiffness Applicant: General Houseware Properties Data Sheet Properties Test Method Data Melt Flow Rate 230∩, 2.16kg D-1238 8.0 g/10min Density D-1505 0.9g/Р Mold Shrinkage HPC Method 1.60% Tensile Strength at Break D-638 350kg/Р Ultimate Elongation D-638 >100 % Flexural Modulus of Elasticity D-790 15,000 kg/Р Hardness D-648 115 R IZOD Impact Strength 23∩ D-256 3.0 kg.cm/cm Heat Resistance 130∩ Air Oven <500 Hour Heat Distotion 4.6kg/Р D-648 105 ∩ PACKAGE: 25KG BAG OR AS BUYER'S REQUEST |
|
» Posted by: Qingdao Volterra Plastic&Rubber Material Import & Export Ltd [China] |
|
|
|
|
|
[Sell]
PP-Polypropylene |
|
|
Properties Test Method Data Melt Flow Rate 230∩, 2.16kg D-1238 8.0 g/10min Density D-1505 0.9g/Р Mold Shrinkage HPC Method 1.60% Tensile Strength at Break D-638 350kg/Р Ultimate Elongation D-638 >100 % Flexural Modulus of Elasticity D-790 15,000 kg/Р Hardness D-648 115 R IZOD Impact Strength 23∩ D-256 3.0 kg.cm/cm Heat Resistance 130∩ Air Oven <500 Hour Heat Distotion 4.6kg/Р D-648 105 ∩ PACKAGE: 25KG BAG OR AS BUYER'S REQUEST |
|
» Posted by: Qingdao Volterra Plastic&Rubber Material Import & Export Ltd. [China] |
|
|
|
|
|
[Sell]
PA6 |
|
|
(ITEM) (UNIT) (STANDARD) GF30 Tensile Strength MPa ISO 527-2 170 Tensile Elongation % ISO 527-2 2 Flexural Strength MPa ISO 178 225 Flexural Module MPa ISO 178 8000 Charpy Notch Impact KJ/m2 ISO 179-1 17 Izod Notch Impact KJ/m2 ISO 180 18 Mass Density g/cm3 ISO 1183 1.37 H.D.T °C ISO 75 220 Package: 25KG BAG OR as buyer's request |
|
» Posted by: Qingdao Volterra Plastic&Rubber Material Import & Export Ltd. [China] |
|
|
|
|
|
[Sell]
PET-polyethylene terephthalate |
|
|
PET (polyethylene terephthalate) Package: 25KG PP bag or as buyer's request
|
|
» Posted by: Qingdao Volterra Plastic&Rubber Material Import & Export Ltd. [China] |
|
|
|
|
|
[Sell]
PP-Polypropylene |
|
|
PP-Polypropylene Injection Grade Attributes: High Stiffness Applicant: General Houseware Properties Data Sheet Properties Test Method Data Melt Flow Rate 230∩, 2.16kg D-1238 8.0 g/10min Density D-1505 0.9g/Р Mold Shrinkage HPC Method 1.60% Tensile Strength at Break D-638 350kg/Р Ultimate Elongation D-638 >100 % Flexural Modulus of Elasticity D-790 15,000 kg/Р Hardness D-648 115 R IZOD Impact Strength 23∩ D-256 3.0 kg.cm/cm Heat Resistance 130∩ Air Oven <500 Hour Heat Distotion 4.6kg/Р D-648 105 ∩
|
|
» Posted by: Qingdao Volterra Plastic&Rubber Material Import & Export Ltd. [China] |
|
|
|
|
|
[Sell]
HDPE high-density polyethylene |
|
|
CAS:9002-88-4 HDPE-High Density Polyethylene Grade: Blow molding grade, injection molding grade, etc. High-density polyethylene (HDPE) or polyethylene high-density (PEHD) is a polyethylene thermoplastic made from petroleum. It takes 1.75 kilograms of petroleum (in terms of energy and raw materials) to make one kilogram of HDPE. Application: Make barrela, plastic bottle and bag, make all kind of pipes, make shading net, and make cable wire-insulating.
|
|
» Posted by: Qingdao Volterra Plastic&Rubber Material Import & Export Ltd. [China] |
|
|
|
|
|
[Sell]
LDPE Low-density Polyethylene |
|
|
LDPE CAS:9002-88-4 Products Form Color: Milky white Shape: Round granular Physical Properties LDPE has good toughness, low temperature resistance,creep, and large thermal expansion. LDPE is easy to process molding, can be extrusion, blow molding.
|
|
» Posted by: Qingdao Volterra Plastic&Rubber Material Import & Export Ltd. [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 next»
|
|