|
|
|
|
|
|
|
[Sell]
RTV Liquid Moulding Silicone Rubber( for Concrete, PU Resin , Gypsum Casting) |
 |
|
Specification
- Durable
- High tear strength for replication
- Low shrinkage
- High simulation
- Cover fine details
RTV Liquid Moulding Silicone Rubber( for Concrete, PU Resin , Gypsum Casting)
1. Application of rtv liquid moulding silicone rubber :
liquid molding casting silicone rubber is mainly applied for making various molds,such as reproduction of poly resin, epoxy, polyurethane-polymer, plaster, gypsum casting and moulding, soaps, candle & lighting, architecture, decorative arts and crafts, plastic toy, gift and stationery, big statue, cultural relic product, etc..
2.Features of rtv liquid moulding silicone rubber
RTV liquid moulding silicone rubber has the following features
a. low viscosity, exceptional fluidity and easy operation : 21000 cps suitable for pouring
b. resistance to deformation, high-temperature 220 degree centigrade
c. acid, alkali and ageing-resistance
d. low shrinkage< 0.2%
e. good tensile strength 36±2 (kgf/cm)
f. high reproduction times |
|
» Posted by: hongyejie [China]  |
|
|
|
|
|
[Sell]
Port and Dock Construction Hose |
|
|
Dredge suction & discharge hose can be used for abrasive and corrosive materials delivery, and it is also used for flood discharge. Besides, it is also used for port and dock construction and this is port and dock construction hose. It is very flexible and it can be connected to pipeline tightly by flanges. And it is highly resistant to abrasion, corrosion and seawater, so it is becoming more and more popular in port and dock construction. Port and dock construction hose is composed of three parts: tube, reinforcement and cover. Tube is made from high quality synthetic rubber (NR, SBR and BR), making hose resistant to abrasion and corrosion. Reinforcement is made from multiple layers of high tensile spiral steel wires, making hose resistant to bending, kink, fatigue and wave. Besides, reinforcement makes hose have solid structure and suitable for high working pressure environment. Cover is made from synthetic rubber (NR, SBR and BR), making hose resistant to abrasion, corrosion, seawater, weather, ozone and aging.
If you are interested contact us via sales@suction-hose.com. |
|
| » Posted by: Hebei Huayu Special Rubber Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Sewage Suction and Discharge Hose |
|
|
Dredge suction & discharge hose is resistant to abrasion, so it can be used to deliver sand, slurry and gravel. It is resistant to corrosion, so it is also used to deliver corrosive sewage, and this is sewage suction & discharge hose. It has excellent flexibility and it can be connected tightly to pipeline. Its structure is similar to slurry suction & discharge hose and seawater suction & discharge hose. It is composed of three parts: tube, reinforcement and cover. Tube is made from high quality synthetic rubber (NR, SBR and BR), making hose resistant to corrosion and work well in delivering sewage. Reinforcement is made from multiple layers of high tensile spiral steel wires, making hose resistant to bending and fatigue. And sewage suction & discharge hose can bear very high working pressure due to the high tensile spiral steel wire reinforcement. Cover is made from NR, SBR or BR, making hose resistant to corrosion, abrasion, weather, ozone and aging.
If you are interested contact us via sales@suction-hose.com. |
|
| » Posted by: Hebei Huayu Special Rubber Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Seawater Suction and Discharge Hose |
|
|
| Dredge suction & discharge hose can be used to deliver many kinds of abrasive materials, such as slurry, sand and gravel. It is also used to handle seawater, and this is seawater suction & discharge hose. It is mainly used for seawater suction, delivery and discharge. It is composed of three parts: tube, reinforcement and cover. Tube is made from high quality synthetic rubber (NR, SBR and BR), making hose resistant to seawater and corrosion. Reinforcement is made from multiple layers of high tensile spiral steel wires, making hose resistant to kink, bending and wave in handling seawater. Besides, the hose is suitable for high working pressure environment and it has solid structure because of the high tensile reinforcement. Cover is made from high quality synthetic rubber (NR, SBR and BR), making hose resistant to abrasion, corrosion, seawater, heat, weather, ozone and aging. The hose is very flexible and it is easy to install & dismantle, because it is connected to pipeline tightly by flange.If you are interested contact us via sales@suction-hose.com. |
|
| » Posted by: Hebei Huayu Special Rubber Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Sand Suction and Discharge Hose |
|
|
Dredge suction and discharge hose features excellent abrasion resistance, so it is mainly used to deliver abrasive material - sand, and this is sand suction and discharge hose. It is easy to install & dismantle and it can be connected to pipeline tightly because of the flanges on the ends. Its structure is same to slurry suction & discharge hose and gravel suction & discharge hose. It is composed of three parts: tube, reinforcement and cover. Tube is made from synthetic rubber, such as NR, SBR and BR, making hose have excellent abrasion resistance. Reinforcement is made from multiple layers of high tensile spiral steel wires, making hose have solid structure and bear high working pressure. And this kind of hose is resistant to kink and fatigue thanks to the reinforcement. Cover is made from high quality synthetic rubber (NR, SBR and BR), making hose resistant to abrasion, corrosion, heat, weather, ozone and aging. Sand suction and discharge hose has long service life as a result. Therefore, it is becoming more and more popular in dredging industry.
If you are interested contact us via sales@suction-hose.com.
|
|
| » Posted by: Hebei Huayu Special Rubber Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Slurry Suction and Discharge Hose |
|
|
Dredge suction & discharge hose can be used for slurry dredging in many places, such as river, lake and sea, and this is the slurry suction & discharge hose. It is mainly used for slurry suction, delivery and discharge. Slurry is abrasive, so slurry suction & discharge hose is highly resistant to abrasion. It is composed of three parts: tube, reinforcement and cover. Tube is made from high quality synthetic rubber, such as NB, SBR and BR, making hose resistant to abrasion and corrosion. Reinforcement is made from multiple layers of high tensile spiral steel wires, making hose resistant to kink and fatigue. And the high tensile reinforcement makes hose suitable for high working pressure environment. Cover is made from synthetic rubber (NR, SBR and BR), making hose resistant to abrasion, corrosion, weather, ozone, aging and cut. The hose has excellent flexibility and it can be connected to pipeline tightly by flange.
If you are interested contact us via sales@suction-hose.com. |
|
| » Posted by: Hebei Huayu Special Rubber Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Dredge Suction and Discharge Hose |
|
|
Dredge suction & discharge hose, also called mud suction & discharge hose, is mainly used for sewage, slurry, seawater and sand suction & discharge in many places. It is also used for flood discharge and port and dock construction. It has excellent flexibility and it is resistant to wave. It is composed of three parts: tube, reinforcement and cover. Tube is made from high quality synthetic rubber, such as NR, SBR and BR, making hose resistant to abrasion and seawater. Reinforcement is made from multiple layers of high tensile spiral steel wires, making hose have solid structure and bear high working pressure. Besides, reinforcement makes hose resistant to bending and fatigue. Cover is made from synthetic rubber, like NR, SBR and BR, making hose resistant to abrasion, corrosion, seawater, heat, weather, ozone and aging. The hose can be connected to pipeline very well, which can reduce the sea wave, so it can deliver medium flows smoothly.
If you are interested contact us via sales@suction-hose.com. |
|
| » Posted by: Hebei Huayu Special Rubber Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Gravel Suction and Discharge Hose |
|
|
| Dredge suction & discharge hose can be used for gravel transport ship to deliver gravel in many places, and this is the so-called gravel suction & discharge hose. Its outstanding feature is that it has excellent abrasion resistance, so it works well in delivering gravel which is highly abrasive. Gravel suction & discharge hose is composed of three parts: tube, reinforcement and cover. Tube is made from synthetic rubber (NR, SBR or BR), making hose resistant to abrasion and corrosion. Reinforcement is made from high tensile spiral steel wires, making hose resistant to kink and fatigue. Besides, the high tensile reinforcement makes hose have solid structure and bear high working pressure. Cover is made from high quality synthetic rubber (NR, SBR or BR), making hose resistant to abrasion, corrosion, weather, ozone, aging and heat. The hose can be connected to pipeline tightly by flanges. And it has excellent flexibility. |
|
| » Posted by: Hebei Huayu Special Rubber Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Open Two-Roll Mixing Mill Machine,Rubber Mixing Mill,Open Mixing Mill Machine |
|
|
Rubber Mixing Mill,Two-Roll Mixing Mill For Rubber,Open Type Rubber Mixing Mills
The machine is used for mixing and kneading raw rubber,synthetic rubber,thermoplastics or EVA with chemicals into even materials.The even materials can be fed to calender,hot presses or other processing machinery for making rubber or plastic products.
Rubber mixing mill machine for double roller machine, mainly open refining organic (1), (2) for casting for welding), frame, rollers, gears, lubrication device, heating, cooling device, roller is adjusting device, safety brake and motor, gear, etc. The roller adopts safe cold hard cast-iron, formed by the surface grinding smooth surface. Inside the hollow cylinder for use, can according to the requirement, the steam and cooling water are used to regulate the temperature of the rolls. Two rolls with different relative rotation speed, rubber roller into two slot by mechanical processing. |
|
| » Posted by: Qingdao Xincheng Yiming Rubber Machienry Co.,Ltd [China] |
|
|
|
|
|
[Sell]
silicone rubber for coating textile |
|
|
Price: USD$ 10.23-12.98/KG
Place of Origin: Guangdong China (Mainland) Brand Name: Hong Ye Silicone Rubber
Min.Order Quantity: 200 Kilogram/Kilograms
Supply Ability: 8 Ton/Tons per Day
Port: shen zhen
Payment Terms: L/C,T/T,Western Union
Delivery Detail: within 3 days after payment confirmed in our bank.
silicone rubber for coating textile Application:
silicone rubber for coating textile is specially used for skid-proof purpose of frilals, underclothes and widely applied for cotton fabric, polyester-mixed cotton cloth, nylon cloth, flax, woolen, insulating cloth, etc.
silicone rubber for coating textile Specification:
1) long working time during room temperature,
2) Vulcanizing quickly under high temperature,
3) Non heavy metal and solvent, non-toxic and innocuity to human body.
4) Excellent third dimension and softness after using the silicone rubber to the textile.
silicone rubber for coating textile Datasheet:
Model TB3130
Appearance Transparent
Hardness(shore A) 30±2
Mix ratio(A:B) 1:1
Viscosity(mPa.s) 60000~100000
Tensile strength(Mpa) 4.6
Tear-strength(KN/m) 19±2
Elongation(%) 360
Pot life/working time(25°C) 12-24 hours
curing time(100-120°C) 10~20(mins)
silicone rubber for coating textile Operation guideline:
1) Stirring A and B to uniformity before using.
2) Mixing A and B component according to A: B = 1:1 by weight or volume, coating the mixture on the textile or socks.
3) Baking the textile or socks in drying oven for 1-3min.
silicone rubber for coating textile Shelf life:
8-10 months when stored under 24°C in original unopened packages.
silicone rubber for coating textile Package:
If ratio is 1:1 :Packed in 20kg/pail + 20kg/pail and 200kg/pail + 200kg/pail.
If ratio is 10:1 :Packed in 20kg/pail + 2kg/pail and 200kg/pail + 20kg/pail.
please feel free to contact Ms kaka:
Tel:86-755-89212365
Mob/Whatsapp:86-18938867528
E-mail: hykat)resinpu(dot)com
Skype:hykat)resinpu(dot)com
|
|
| » Posted by: SHENZHEN HONG YE JIE TECHONOLOGY CO., LTD. [China] |
|
|
|
|
|
[Sell]
Rtv Molding Silicone Rubber For Shoe Sole Mold Making |
|
|
Feature:
1.Good characteristics of easy-operation
2.Low shrinkage
3.Favorable tension
4.No deformation
5.High temperatureresistance, acid and alkali-resistance and ageing resistanc
Using Instruction:
Component A is white flowing liquid and component B is the curing agent. For example, take silicone rubber of 100g and add 3-5% curing agent for mixing evenly. After the silicone rubber and the curing agent are completely mixed, put the silicon into a vacuum machine for deairing to remove the bubbles. After deaired, pouring the liquid silicone rubber into the product to be duplicated or into the mold frame.
Note: the product is used for pouring or brushing technique. That is to say, fix the product or sole model to be duplicated onto a plane plate, then enclose the plane frame with wooden plates to prevent the leakage of the silicon , mix the silicone rubber and the curing agent evenly according to the mixing ratio of 100 : 3-5 and pour them onto the sole model, then brush evenly with a wooden plate or a brush, and fill up the mold frame with gypsum after the silicone rubber is dried.
Rtv Molding Silicone Rubber For Shoe Sole Mold Making Storage and Precautions:
The product, which is an environmentally-friendly liquid silicone product, is not easy to burn and can be stored and transported as non-hazardous goods. The shelf life of the product is about one year from the date of production. Inspection is required when exceeding the time limited. It can continue to be used in case of neither thickening nor deterioration.
Any questions of RTV molding silicone rubber, Certifications: RoHS.MSDS.SGS ISO9001:2000
Place of Origin: Guangdong China
Brand Name: HY silicone rubber
Model Number: HY6,HY7 series rubber for mold making
Payment: FOB SHENZHEN USD6-10
Shipping Terms: shenzhen port / by sea
Minimum Order Quantity: 200 Kilogram
Packaging Details: 25kg/drum and 200kg/drum
Delivery Time: within 3 days after payment confirmed in our bank.
Payment Terms: L/C,T/T, Western Union, Paypal
Supply Ability: 8 Ton per Day
Any questions for our Silicone Rubber, pls feel free to contact Lydia:
Tel: 86-755-89212380
Fax:+86-0755-89948030
Mob: +86-18988789546
Facebook: samuelsilicone(at)gmail(dot)com
Skype: samuelsilicone(at)hotmail(dot)com
|
|
| » Posted by: HONG YE CHEMICAL PLANT CO; LTD. [China] |
|
|
|
|
|
[Sell]
Addition cure silicon rubber for artificial stone products |
|
|
Applications of rtv-2 rtv liquid silicone rubber for concrete molds:
E642# addition molding silicone could be mainly used for making concrete stones, precision molds, PU molds, resin molds, gypsum casting, candle molding, for life casting, fabric finishing, seal for electronic components and solar circuit board, trademark decoration. etc.
Datasheets of rtv liquid silicone rubber for concrete molds
Model E640#
Appearance High Transparent
Mixing Ratio 10:1
Viscosity part A (Mpa.s) 55000±2000
Viscosity part B (Mpa.s) 3500±1000
Viscosity mixed(Mpa.s) 7000 ±1000
Operating time ( Mins 25°C) 20-40mins
Curing time ( Hrs 25°C) 3~12hrs
Hardness (A°) 40-42
Tensile-strength(kgf /cm2 ) 45±3
Tear-strength (Kgf/cm ) 20±3
Elongation-break(%) 280±30
Retractility(%) ≤0.1
Features of rtv liquid silicone rubber for concrete mold
Two-parts, flowable liquid silicon & curing agent.
Can solve the problem of not lighting of the candles and the problem of sticky and white stains on the surface of cement & stone products.
Good tensile strength and tear strength,low shrinkage.
It gets cured at room temperature 25 0C within 5-7 hours.
An exceptional fluidity and good operability, easy to be demolded.
Suitable for pouring methods of operation for small sized molds making.
Desprition of rtv liquid silicone rubber for concrete molds
E642# addition molding silicone is generally named two-components silicone rubber, Part A and part B. It features an exceptional fluidity and good operability. The mixing ratio is 1:1,mainly be suitable for making molds application.
Q642 addition cure silicone rubber is mainly used for molds making for food grade products. And it is also develop to solve the problem of not lighting of the candles and the problem of sticky and white stains on the surface of cement & stone products.
OPERRATING INSTRUCTION of rtv liquid silicone rubber for concrete molds for garden:
1.Stir part A and part B with right mixing ratio
evenly. And get the mixture for vacuum-
pumping. (If there is no vacuumizer,you can just pour the mixture slowly from the corner so that less bubbles caused).
2. Enclose the product (the original model) with four plastic plates or wooden plates.
3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.
4. Pour the mixture with correct mixing ratio into the model frame.
After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .
PACKAGE of liquid silicone rubber for large concrete casting:
Packed in clean 5kg/pail, 25kg/pail, 200kg/pail.
Certifications: RoHS.MSDS.SGS ISO9001:2000
Place of Origin: Guangdong China
Brand Name: HY silicone rubber
Model Number: HY6,HY7 series rubber for mold making
Payment: FOB SHENZHEN USD6-10
Shipping Terms: shenzhen port / by sea
Minimum Order Quantity: 200 Kilogram
Packaging Details: 25kg/drum and 200kg/drum
Delivery Time: within 3 days after payment confirmed in our bank.
Payment Terms: L/C,T/T, Western Union, Paypal
Supply Ability: 8 Ton per Day
Any questions for our Silicone Rubber, pls feel free to contact Lydia:
Tel: 86-755-89212380
Fax:+86-0755-89948030
Mob: +86-18988789546
Facebook: samuelsilicone(at)gmail(dot)com
Skype: samuelsilicone(at)hotmail(dot)com |
|
| » Posted by: HONG YE CHEMICAL PLANT CO; LTD. [China] |
|
|
|
|
|
[Sell]
Pad Printing Silicon Rubber |
|
|
Pad Printing Silicon Rubber Usages:
Pad printing silicone rubber is mainly use for printing irregular patterns on plastic toys, shampoo, pen, glass ,electroplating toys and trade makers and so on .
Pad Printing Silicon Rubber description
Pad printing silicone rubber as a carrier which transfer patterns on the steel plate to the toys products surface.
Pad Printing Silicon Rubber Features:
1)High print times
2)abrasion resistance.
3)Good printing effects
4)Permanent and durable
Pad Printing Silicon Rubber Operation Instructions:
Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3—5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Pouring the vacuumed mixture into the original mold slowly,when it turns dry,you can take the product out,then the mold is done.
Shelf life for Pad Printing Silicon Rubber
8~10months, when stored in a dry & cool place under the room temperature 25.
Packing for Pad Printing Silicon Rubber
20kgs/drum vacuumed packing
Certifications: RoHS.MSDS.SGS ISO9001:2000
Place of Origin: Guangdong China
Brand Name: HY silicone rubber
Model Number: HY6,HY7 series rubber for mold making
Payment: FOB SHENZHEN USD6-10
Shipping Terms: shenzhen port / by sea
Minimum Order Quantity: 200 Kilogram
Packaging Details: 25kg/drum and 200kg/drum
Delivery Time: within 3 days after payment confirmed in our bank.
Payment Terms: L/C,T/T, Western Union, Paypal
Supply Ability: 8 Ton per Day
Any questions for our Silicone Rubber, pls feel free to contact Lydia:
Tel: 86-755-89212380
Fax:+86-0755-89948030
Mob: +86-18988789546
Facebook: samuelsilicone(at)gmail(dot)com
Skype: samuelsilicone(at)hotmail(dot)com |
|
| » Posted by: HONG YE CHEMICAL PLANT CO; LTD. [China] |
|
|
|
|
|
[Sell]
HY 9055 Electronic Potting Compound silicon rubber |
|
|
Product Feature
HY 9055 is a kind of low viscosity, Inherent flame resistance, two components addtion cured potting silicone with heat-conducting. It cures with both on room temperature and heated temperature. It has the feature of the higher temperature the faster of the curing time. It can be applied to electronic components for insulation, waterproofing, fixed and flame retardant. It mainly applied in electronic components surface with materials of PC(Poly-carbonate)、PP、ABS、PVC, etc. and metal materials.
Typical Application
HY 9055 could be applied to
- high powered electronics,
- DC/DC module and circuit board which requires heat dissipation and high temperature resistance.
-It can be broadly used for LED screen, Wind Power Generator, PCB substrate, etc.
Technical Parameters
Features Part A Part B
Before Curing Appearence Gray Fluid White Fluid
Viscosisty（25℃cps） 2500±500 2500±500
Operation features Mixing Ratio 1：1
Viscosisty(after mixing) （cps） 2000～3000
Operating Time（25℃ hr） 120
Curing time （min，25℃） 480
Curing time（80℃ hr） 20
After Curing Hardness（Shore A） 55±5
Thermal conductivity [W（m•K）] ≥0.8
Dielectric Strength（KV/mm） ≥25
Permittivity（1.2MHz）
3.0～3.3
Volume Resisivity（Ω•cm） ≥1.0Ă—1016
linear expansibility [m/（m•K）] ≤2.2Ă—10-4
Fire Resistance 94-V1
(Pls note: the above data for this product in 25 ℃ temperature, 55 percent humidity conditions, for reference. The accurate data is measured by customers when using.)
TECHNICAL GUIDELINES
1, Pls put part A and part B in separate container and stir evenly before mixing the two part together.
2, Mixing Ratio: part A: part B = 1:1
3, Deaeration the mixture in vacuum pump under 0.08 MPa for 3-5 minutes.Then the mixture could be used for pouring.
4, Pls note that the thickness of the silicone affects the curing time. If the silicone used is a little thick,then the curing time will be a little longer.The temperature also affects the curing time.When in lower temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization. With temperature of 80～100℃, the silicone will cure in 15 minutes; while in 25℃ room temperature, the silicone will cure around 8 hours.
Notes:
1.The following material may hinder the curing of HY 9055, So pls use after the test. When necessary, pls clean the application areas.
 Organotin compound or Condensation silicone with organotin
 Sulphur, sulfide and sulfur rubber materials.
 Amine compounds as well as contains the amine materials.
 Pewters solder flux
2. HY 9055 should be sealed storage.The mixture should be used up disposably to avoid causing waste.
3. HY 9055 belongs to non-dangerous goods, but keep away from mouth and eyes.
4. When it gets stratified after a period of storage, Please mix it evenly before using,which does not affect the performance.
PACKAGE
20Kg/pail as a set (Part A 10Kg + Part B 10Kg)
Any comments pls feel free to contact Ms Sabrina
Tel: +86-755-89948006
Fax:+86-755-89948030
Mob: +86-18938867533
Email:hyse@szrl.net
Skype: sabrinapeng0601 |
|
| » Posted by: Hongkong Hong Ye Silicone Technology Co.,Ltd [China] |
|
|
|
|
|
[Sell]
Silastic RTV silicone rubber |
|
|
Silastic RTV silicone rubber
1Two part of Silastic RTV silicone application :
RTV silicone is mainly be used for mold making for poly resin crafts,Pu crafts, Pu resin Crafts, gypsum/ plaster moldings, light and candle crafts, Statues and , cement, concretes and so on
2Two part of Silastic RTV silicone Features :
1) Resistance to deformation and expansion
2) Low shrinkage
3) Excellent molding times.
4) Easy operation
5) Low viscosity . good fluidity
6) High molding times
2 Operation of Two part of Silastic RTV silicone
If the customer wants to make large products and large size molds, the mold should be made ofsilicon rubber for mold making with high hardness. On the contrary, if the mold with fine and precision patterns, it should be made of silicon with low hardness. The amount of the curing agent depends on the actual requirements of the customer.
Operations
Step One: Take 100g of part A and add 2g of part B and mix the silicon rubber and curing agent evenly.
Notes: Moulding silicon rubber is a kind of flowing liquid and it contains two parts. Part A is a kind of white flowing liquid and part B is the curing agent. Remember to mix part A and part B evenly, otherwise the silicon rubber will be partly solidified and this will give birth to difficulties in your final operation. What’s more, the finished moulds will meet a short life. All of these will cause a waste of silicon rubber.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes. Otherwise, it will cause cross linking reaction, and no more further steps will be available.
Any questions of silicone rubber for mold making, pls feel free to contact Ms Sabrina
Tel: +86-755-89948006
Fax:+86-755-89948030
Mob: +86-18938867533
Email:hyse@szrl.net
Skype: sabrinapeng0601 |
|
| » Posted by: Hongkong Hong Ye Silicone Technology Co.,Ltd [China] |
|
|
|
|
|
[Sell]
Silicone rubber for mold making |
|
|
Brief description:
Silicone rubber for mold making:
1. resistance to deformation, high-temperature
2. high reproduction times
3. good tensile strength
4. exceptional fluidity and good operability.
Detailed description:
Silicone rubber for mold making
Silicone rubber for mold making applications
Silicone rubber for mold making is primarily intended for poly resin crafts, PU crafts, PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy , stationery gifts crafts industry, a large statue Buddha, furniture, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.
Silicone rubber for mold making description
Silicone rubber for mold making is white or red flowing liquid with general hardness of 22-50A°after curing. Molding silicon rubber is a kind elastic silicon rubber mold which features with resistance to deformation, high-temperature, acid-alkali and expansion as well as high reproduction times, good tensile strength, tear strength and elongation.
Frequently asked questions of silicone rubber for mold making
Why does the silicone rubber mold have few molding times?
The silicone rubber mold has few molding times is due to follwoing reasons: adding too much silicone oil which will destroy the molecular of silicone rubber; making the mold for small and fine detailed products with higher hardness silicone rubber which is easy to break; making the mold for large products with soft silicone rubber which will reduce the tensile and tear strength of the mold, and the mold will have deformation. Thus, we should take the proper silicone rubber to make the mold for suitable products.
pls feel free to contact Ms Sabrina
Tel: +86-755-89948006
Fax:+86-755-89948030
Mob: +86-18938867533
Email:hyse@szrl.net
Skype: sabrinapeng0601
Place of Origin Guangdong China
Brand Name Hong Ye Silicone Rubber
Model Number HY625 HY630 silicone rubber
Payment & Shipping Terms:
Minimum Order Quantity: 200 Kilogram
Price: FOB shenzhen USD 5.8~7.5
Packaging Details: 25kg/drum and 200kg/drum
|
|
| » Posted by: Hongkong Hong Ye Silicone Technology Co.,Ltd [China] |
|
|
|
|
|
[Sell]
Liquid Pad Printing Silicone Rubber Material |
|
|
Specification
- Durable
- Good effects for printing
- Good quality without any impurity
- Good resilience
- Adjustable hardness
1. Applications of liquid pad printing silicone rubber
Pad printing silicone rubber is mainly use for printing irregular patterns of plastic toys, electroplating toys and trade makers . Pad printing silicone rubber as a carrier which transfer patterns on the steel plate to the toys products surface
2. Features of liquid pad printing silicone rubber
a. resistance to deformation, high-temperature
b. high printing times
c. good aging resistance
d. exceptional elasticity
e. great printing effect
3. Operation Instructions of liquid pad printing silicone rubber
Pad printing silicone rubber is two-component silicone, part A is liquid silicon rubber, part B is catalyst. The usual mixture of silicone rubber and catalyst is 100: 2 or 100: 3. E.g. we take 100g of liquid silicon rubber and 2g-3g catalyst, mix them and pour it to your mold. A fter 2-4 hours, you will get a Pad printing silicone rubber
4. FAQ of liquid pad printing silicone rubber
Why the silicon pad is non-durable?
This problem is caused not by the liquid silicon rubber itself, but in the process of filtering, the filtering handled not properly and impurities are not all filtered out; or in the process of packing as containers not cleaned thoroughly.
As the silicon oil will break the molecular chain of the silicon rubber. More silicon oil added, softer the pad printing will be, meanwhile nondurable and easy ageing it will also turn to be.
Some customers do not know well about the performance of silicon rubber. Actually, the durability of printing pad is closely related to the size of printing pattern. Some factories do not want to take the trouble to change the printing pad. While in fact, for large pattern, large silicone pads should be used, otherwise, use small one.(Generally, the ratio of the silicone pad to printing pattern is 3:1
6. Other details of liquid pad printing silicone rubber
Place of Origin Guangdong China
Brand Name Hong Ye Silicone Rubber
Model Number HY901, HY902, HY912, HY916, pad printing silicone rubber
Payment & Shipping Terms:
Minimum Order Quantity: 100 Kilogram
Price: FOB shenzhen USD 18/kg
Packaging Details: 20kg/drum, 25kg/drum and 200kg/drum
Delivery Time: within 3 days after payment confirmed in our bank
Payment Terms: L/C at sight, T/T, Western Union
Supply Ability: 8 Ton per Day
Certifications:RoHS, MSDS, SGS, ISO9001:2000
|
|
| » Posted by: Shenzhen Hong Ye Jie Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Electronic Potting Silicone Rubber |
|
|
1. Product Feature of Electronic Potting Silicone Rubber
HY 9055 silicone rubber is a kind of low viscosity, Inherent flame resistance, two components addtion cured potting silicone with heat-conducting. It cures with both on room temperature and heated temperature. It has the feature of the higher temperature the faster of the curing time. It can be applied to electronic components for insulation, waterproofing, fixed and flame retardant.
2. Typical Application of Electronic Potting Silicone Rubber
HY 9055 electronic potting silicone rubber could be applied to
- high powered electronics,
- DC/DC module and circuit board which requires heat dissipation and high temperature resistance.
-It can be broadly used for LED screen, Wind Power Generator, PCB substrate, etc.
3. Technical Guidelines of of Electronic Potting Silicone Rubber
a, Pls put part A and part B in separate container and stir evenly before mixing the two part together.
b, Mixing Ratio: part A: part B = 1:1
c, Deaeration the mixture in vacuum pump under 0.08 MPa for 3-5 minutes.Then the mixture could be used for pouring.
Note: The thickness of the silicone affects the curing time. If the silicone used is a little thick,then the curing time will be a little longer.The temperature also affects the curing time.When in lower temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization. With temperature of 80~100℃, the silicone will cure in 15 minutes; while in 25℃ room temperature, the silicone will cure around 8 hours.
4.Notes of Electronic Potting Silicone Rubber
a.The following material may hinder the curing of HY 9055, So pls use after the test. When necessary, pls clean the application areas.
Organotin compound or Condensation silicone with organotin
Sulphur, sulfide and sulfur rubber materials.
Amine compounds as well as contains the amine materials.
Pewters solder flux
b. HY 9055 should be sealed storage.The mixture should be used up disposably to avoid causing waste.
c. HY 9055 belongs to non-dangerous goods, but keep away from mouth and eyes.
d. When it gets stratified after a period of storage, Please mix it evenly before using,which does not affect the performance.
SHELF LIFE AND TRANSPORTATION
1. Twelve(12) months when stored at 24C in tightly closed original packages.
2. This kind of product is non-dangerous product, which could be transported as general chemicals.
3. Storage beyond the expired date doesnot necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
|
|
| » Posted by: Shenzhen Hong Ye Jie Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Medical Grade liquid silicone rubber for shoe insoles |
|
|
Specification
- Food grade
- Medical grade
- High tear strength
- Fast curing time
- High translucent
Application of Medical Grade liquid silicone rubber for shoe insoles
The product is a two component high elongation silicone gel designed for silicone food care products, such as silicone insole.
This product cured at room temperature to a soft track gel with the addition of curing agent. The soft nature and cushioning effect offer this product provides excellent protection for our food health care.
Features of Medical Grade liquid silicone rubber for shoe insoles
1.convenient 1:1 mixed ratio by weight
2. high elongation gel
3. low viscosity easily pourable
4.room temperature vulcanized and heat acceleration
5. soft track and selcky gel
6. absorbs shock and protets delicate mechanical component
7. no creativ by –product, no concerns nogarding corrosion
Q: What are Foot Relief Insoles designed to do?
A: Foot Relief Insoles are fluid filled insoles that have five primary benefits and a long list of secondary benefits. The insoles are designed to cushion, massage, absorb shock, give arch support, and increase circulation. The liquid insole will form to almost any shape foot giving you a customized fit after only a few minutes of wear. Many customers refer to our liquid filled insoles as "liquid orthotics" because of the way the insoles stretch slightly allowing the liquid to fill in the unique arches of your foot providing maximum comfort.
|
|
| » Posted by: Shenzhen Hong Ye Jie Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
[CN] Liquid platinum cure silicone rubber for adult women sex toys making |
|
|
Specification
Food grade
High tear strength
Not sticky
Suitable hardness
Durable
1. Description -Liquid platinum cure silicone rubber for adult women sex toys making
Liquid platinum cure silicone rubber for adult women sex toys making is generally named two-components silicone rubber, Part A and part B. It features an exceptional fluidity and good operability.
The mixing ratio is 1:1 or 1:1,mainly be suitable for making molds for adult sex toys, it’s FOOD GRADE silicone rubber.
2. Other Applications - Liquid platinum cure silicone rubber for adult women sex toys making
This liquid silicone rubber not only excellent for adult women sex toys making, it could also be mainly used for making concrete stones, wax molds, PU molds, resin molds, gypsum casting, candle molding and chocolate , candy and any other FDA food product mold making,prototyping etc.
4. Features- Liquid platinum cure silicone rubber for adult women sex toys making
(1)high tensile & tear strength
(2) Low linear shrinkage
(3)free Curing agent
(4)brushing & pouring
(5) high duplication times
3. Instruction- Liquid platinum cure silicone rubber for adult women sex toys making
Liquid platinum cure silicone rubber for adult women sex toys making are generally named as two-part room temperature sulfurated silicone rubber, which features an exceptional fluidity and good operability. When mixed with 2-3% curing agent, they can still be operated within 30 minutes, but will be formed after 2-3 hours. With resistance to deformation, high temperature, acid and alkali, and expansion, silicon flexible molds are used for mold duplication and delicate mold making for poli crafts, resin crafts lighting and candle crafts.
|
|
| » Posted by: Shenzhen Hong Ye Jie Technology Co., Ltd. [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 next»
|
|
|
