|
|
|
|
|
|
|
[Sell]
4-meo-pcp |
 |
|
| product name:4-meo-pcp CAS:2201-35-6 MF:C18H27NO Mol. mass:273.412 g/mol purity:above 99.5% Appearance:White or yellow powder packing:according to customers' requirements Pharmaceutical Intermediates Widely used in medicine, research, etc Can begin with small sample,any quantity is OK Can send out at the same time and send you the tracking number For the payment,you can use Western union,Money gram,bank wire |
|
» Posted by: CHINA HENGTAI INDUSTY LIMITED [China]  |
|
|
|
|
|
[Sell]
4-FMA |
|
|
| product name:4-FMA purity:99.3%--99.6% Appearance:White powder packing:according to customers' requirements Pharmaceutical Intermediates Widely used in medicine, research, etc Can begin with small sample,any quantity is OK Can send out at the same time and send you the tracking number For the payment,you can use Western union,Money gram,bank wire |
|
| » Posted by: CHINA HENGTAI INDUSTY LIMITED [China] |
|
|
|
|
|
[Sell]
4-FMC |
|
|
| product name:4-FMC CAS number:7589-35-7 Formula:C10H12FNO Mol. mass:181.206 g/mol purity:99.3%--99.6% Appearance:White or light yellow powder packing:according to customers' requirements Pharmaceutical Intermediates Widely used in medicine, research, etc Can begin with small sample,any quantity is OK Can send out at the same time and send you the tracking number For the payment,you can use Western union,Money gram,bank wire |
|
| » Posted by: CHINA HENGTAI INDUSTY LIMITED [China] |
|
|
|
|
|
[Sell]
4-FA |
|
|
| product name:4-FA CAS number:459-02-9 Formula:C9H12FN Mol. mass:153.20 g/mol purity:99.3%--99.6% Appearance:White or light yellow powder packing:according to customers' requirements Pharmaceutical Intermediates Widely used in medicine, research, etc Can begin with small sample,any quantity is OK Can send out at the same time and send you the tracking number For the payment,you can use Western union,Money gram,bank wire |
|
| » Posted by: CHINA HENGTAI INDUSTY LIMITED [China] |
|
|
|
|
|
[Sell]
4-BMC |
|
|
| product name:4-BMC 4-Bromomethcathinone Brephedrone CAS number:486459-03-4 Formula:C10H12BrNO Mol. mass:242.11 g/mol purity:99.3%--99.6% Appearance:White or light yellow powder packing:according to customers' requirements Pharmaceutical Intermediates Widely used in medicine, research, etc Can begin with small sample,any quantity is OK Can send out at the same time and send you the tracking number For the payment,you can use Western union,Money gram,bank wire |
|
| » Posted by: CHINA HENGTAI INDUSTY LIMITED [China] |
|
|
|
|
|
[Sell]
4-MEC |
|
|
| product name:4-MEC (4-Methylethcathinone) Systematic(IUPAC)name: (RS)-2-ethylamino-1-(4-methylphenyl)propan-1-one CAS number: 1225617-18-4 MF: C12H17NO Molar mass: 191.27 g/mol purity:99.3%--99.6% Appearance:White powder crystal packing:according to customers' requirements usage:as Pharmaceutical Intermediates Widely used in medicine, research, etc Can begin with small sample,any quantity is OK Can send out at the same time and send you the tracking number For the payment,you can use Western union,Money gram,bank wire |
|
| » Posted by: CHINA HENGTAI INDUSTY LIMITED [China] |
|
|
|
|
|
[Sell]
5-Meo-DALT |
|
|
| product name:5-Meo-DALT CAS:928822-98-4 MF:C17H22N2O Mol. mass:270.375 g/mol purity:above 99.5% Appearance:White or light yellow powder packing:according to customers' requirements Pharmaceutical Intermediates Widely used in medicine, research, etc |
|
| » Posted by: CHINA HENGTAI INDUSTY LIMITED [China] |
|
|
|
|
|
[Sell]
5-Meo-DMT |
|
|
| product name:5-Meo-DMT CAS number:1019-45-0 MF:C13H18N2O Mol. mass:218.298 g/mol purity:99.5% Appearance:White or light yellow powder packing:according to customers' requirements Pharmaceutical Intermediates Widely used in medicine, research, etc Can begin with small sample,any quantity is OK Can send out at the same time and send you the tracking number For the payment,you can use Western union,Money gram,bank wire |
|
| » Posted by: CHINA HENGTAI INDUSTY LIMITED [China] |
|
|
|
|
|
[Sell]
5-MEO-MIPT |
|
|
| product name:5-MEO-MIPT CAS:96096-55-8 MF:C15H22N2O MW:246.35 purity:99.3%--99.6% Appearance:White powder packing:according to customers' requirements Pharmaceutical Intermediates Widely used in medicine, research, etc Can begin with small sample,any quantity is OK Can send out at the same time and send you the tracking number For the payment,you can use Western union,Money gram,bank wire |
|
| » Posted by: CHINA HENGTAI INDUSTY LIMITED [China] |
|
|
|
|
|
[Sell]
5-Meo-AMT |
|
|
| product name:5-Meo-AMT CAS:1137-04-8 MF:C12H16N2O Mol. mass:204.2712 g/mol purity:above 99.5% Appearance:White or light yellow powder packing:according to customers' requirements Pharmaceutical Intermediates Widely used in medicine, research, etc Can begin with small sample,any quantity is OK Can send out at the same time and send you the tracking number For the payment,you can use Western union,Money gram,bank wire |
|
| » Posted by: CHINA HENGTAI INDUSTY LIMITED [China] |
|
|
|
|
|
[Sell]
PB22(QUPIC) |
|
|
| product name:PB22 Systematic(IUPAC)name: 1H-indole-3-carboxylic acid, 1-pentyl-, 8-quinolinyl ester CAS number: 1400742-17-7 MF: C23H22N2O2 purity:99.3%--99.6% Appearance:White powder crystal packing:according to customers' requirements usage:as Pharmaceutical Intermediates Widely used in medicine, research, etc Can begin with small sample,any quantity is OK Can send out at the same time and send you the tracking number For the payment,you can use Western union,Money gram,bank wire |
|
| » Posted by: CHINA HENGTAI INDUSTY LIMITED [China] |
|
|
|
|
|
[Sell]
5FPB22 |
|
|
| product name:5FPB22 Systematic(IUPAC)name: PB22F; PB-22F; 5F-PB22; 5F-PB-22 CAS number: 1400742-41-7 MF: C23H22FN2O2 purity:99.3%--99.6% Appearance:White powder crystal packing:according to customers' requirements usage:as Pharmaceutical Intermediates Widely used in medicine, research, etc Can begin with small sample,any quantity is OK Can send out at the same time and send you the tracking number For the payment,you can use Western union,Money gram,bank wire |
|
| » Posted by: CHINA HENGTAI INDUSTY LIMITED [China] |
|
|
|
|
|
[Sell]
red mercury |
|
|
| Purity: 99.99% Appearance: cherry red liquid Specific gravity: 20:20 Flashing point: 170.026 Melting point:-37.67 Boiling point: 356.720 K reaction: 0.00016 VDSI reaction: 0.30-0.29 P reaction: 9.000-8.000 Usage: pharmaceutical intermediate, gold mining, etc. |
|
| » Posted by: CHINA HENGTAI INDUSTY LIMITED [China] |
|
|
|
|
|
[Sell]
silver mercury |
|
|
| Content Mercury (Hg): 99.9% - 99.99995% Si: 0.0004% Max. Fe: 0.0002% Max. Ca: 0.0001% Max. Pb, Cu, Zn: Trace. Packing 34.5kg/flask, 1 flask/wooden case. Used in 1. mercury compounds. 2. catalytic agent and cooling agent. 3. mercury thermometer, hematomanometer, barometer and some other instruments. 4. lighting industry, manufacture mercury lamp, fluorescent lamp, ultraviolet light, etc. 5. pharmaceutical industry used for mercurochrome and dental additive. 6. mining industry as gold purification medium. |
|
| » Posted by: CHINA HENGTAI INDUSTY LIMITED [China] |
|
|
|
|
|
[Sell]
electronic potting silicon rubber |
|
|
electronic potting silicon Applications:
electronic potting silicon: is mainly applied for the surface of polycarbonate, PP, ABS, PVC, metal etc., which is suitable for the electronic moisture-proof and waterproof, fixed. It is applicable to sealing bonding coating LED for electronic parts.
electronic potting silicon Features:
electronic potting silicon: is two-component condensation cure silicone with the characteristics of low viscosity, easy operation, good bonding feature. The safety of potting compound silicone can reach the EU-ROHS requirements fully.
electronic potting silicon: Operations:
1. electronic potting silicon: First stir the Part A completely before using (to be sure the segiment is evenly mixed) to mixing the Part B with Past A.
2. electronic potting silicon:: Mix the Part A and Part B completely according to the mix ratio (10:1 by weight) and can be used after deaired about 3 minutes.
3. electronic potting silicon::This product can be vulcanized at room temperature. After basic curing then go to the next step. Full curing process will be within 24 hours. The enviromental temperature, especially the humidity, will affect the curing time greatly. Customers should make appropriate adjustments according to local conditions. The mixed silicone should be finished at one time to avoid any waste of material.
electronic potting silicon: packaging, storage and transportation:
1. electronic potting silicon: is vacuuming packed with 20kg/drum A. 2kg/drum B.
2. electronic potting silicon: should be stored in a cool dry place, avoid the sun and rain, it must be kept away from acids, alkalis, salts and other compounds.
3. electronic potting silicon:, shelf life is one year from the date of production under 25°C , and it can be re-used through a re-examination even if over its storage period.
electronic potting silicon: Standard Datasheet for Your reference:
Model: 9300#
Viscosity (cp): 800±1000
Hardness (Ao): 0 A
thermal conductivity(w/K); ≥0.2
Dielectric strength(kv/mm):≥25
Dielectric constant(1.2H):3.0-3.3
Mixing ratio (%): 1:1
Operating Time(min): 20-30
Curing Time(H):8
Any questions of silicone rubber, please feel free to contact Ms Tiffany:
TEL: 0086-755-89948294
FAX: 0086-755-89948030
MOBILE: 0086-15813726516
E-mail: hyz (at) szrl (dot) net
|
|
| » Posted by: Shenzhen Hong Ye Silicone Technology Co.,Ltd [China] |
|
|
|
|
|
[Sell]
RTV-2 silicone rubber |
|
|
[1] RTV-2 silicone rubber application:
RTV-2 silicone rubber application
RTV-2 silicone rubber is mainly applicable to make the silicone mould for cultural relic duplication,architectural decoration, resin crafts, lighting ornaments, candles, statues, model design, product exploitation, etc.
[2] RTV-2 silicone rubber features :
RTV-2 silicone rubber, silicon rubber are generally named two -component room temperature vulcanization silicone rubber, a kind elastic silicone rubber mold which features with resistance to deformation, high-temperature, acid-alkali and expansion
[3] How to choose RTV2 silicone rubber for mold making :620# Mainly be used for making various mold which features detailed pattern crafts, plastic , resin products and so on.
628# white, the usage for poly crafts, lighting and candles ,molds in multiple pieces for large products.
630# white, the usage for poly crafts, lighting and candles, multiple piece molds for large product.
[4]RTV-2 silicone rubber instruction: RTV-2 silicone rubber are generally named as two-part room temperature sulfurated silicone rubber, which features an exceptional fluidity and good operability. When mixed with 2-3% curing agent, they can still be operated within 30 minutes, but will be formed after 2-3 hours. With resistance to deformation, high temperature, acid and alkali, and expansion, silicon flexible molds are used for mold duplication and delicate mold making for poli crafts, resin crafts lighting and candle crafts.
Any questions of Liquid silicone rubber, please feel free to contact Ms Tiffany:
TEL: 0086-755-89948294
FAX: 0086-755-89948030
MOBILE: 0086-15813726516
E-mail: hyz (at) szrl (dot) net
|
|
| » Posted by: Shenzhen Hong Ye Silicone Technology Co.,Ltd [China] |
|
|
|
|
|
[Sell]
Manual mold making silicone rubber |
|
|
Applications of Manual mold making silicone rubber:
Manual mold making silicone rubber is mainly applicable to manual mold design, PVC plastic molds, cement product molds, melting point alloy molds, alloy toy craftworks, plastic toy craftworks, gifts and stationery, large statues, duplication of cultural relics, shoe sole mold fabrication, pad printing positioning, shock resistance for electronic equipments, etc.
Description of Manual mold making silicone rubber:
Manual mold making silicone rubber is flowing liquid with consistant quality in whatever color. It consists of two components, wherein component A is silicone rubber, and component B is curing agent or vulcanizing agent. Firstly process and prepare the model mold or the product to be duplicated, take certain amount of the silicone rubber, add 2-3% solidifying agent, and mix evenly for use. One mold pair can be solidified and formed in 2-3 hours. The formed mold can be used repeatedly without deformation and water shrinkage and with high temperature resistance, thereby providing fast duplication of the product with a product shrinkage 2. The 418 manual mold silicon is mainly applicable to manual molds and small number of product duplication.
Operation Instruction of Manual mold making silicone rubber:
1. The Manual mold making silicone rubber is applied to small products or products with fine patterns. The mold for the fine detailed and small products should be made of soft silicon to protect the products from easy breaking when demoulding.
2. If large product duplication or fabrication, the mold should be made of higher hardness silicone rubber so that the products made will not deform.
Any questions of Liquid silicone rubber, please feel free to contact Ms Tiffany:
TEL: 0086-755-89948294
FAX: 0086-755-89948030
MOBILE: 0086-15813726516
E-mail: hyz (at) szrl (dot) net
|
|
| » Posted by: Shenzhen Hong Ye Silicone Technology Co.,Ltd [China] |
|
|
|
|
|
[Sell]
pad printing silicone rubber |
|
|
1.The application of pad printing silicone rubber:
Pad printing silicone rubber with high printing times and abrasion,resistence,without any inpurites,with good printing effects .
2.The usage of pad printing silicone rubber:
Pad printing silicone rubber is used for making the printing pads for plastic toys, craftworks, product printing.
3.The description of pad printing silicone rubber:
The pad printing silicone rubber has the advantages of abrasion resistance, high temperature resistance, good printing effect, etc. , which made of top-quality raw material due to adding American Dupont Teflon high-temperature resistance new material, is processed through high-temperature machining.
The pad printing silicone rubber is mainly applicable to plastics toys, electroplating products, electronic toys, trademarks and irregular pattern printing.
The pad printing silicone rubber is a carrier which transfer printing the patterns on the steel plate onto the toy products' surface.
If you have any further information about Pad Printing silicone rubber, pls feel free to contact Ms Tiffany Van.
Tel: +86 755 89948294
Fax: +86 755 89948030
Mob: +86 15813726516
Email: hyz (at) szrl (dot) net |
|
| » Posted by: Shenzhen Hong Ye Silicone Technology Co.,Ltd [China] |
|
|
|
|
|
[Sell]
Liquid silicone rubber |
|
|
FEATURES of Liquid silicone rubber:
1. Two-part of Liquid silicone rubber: flowable liquid silicon and curing agent.
2. Liquid silicone rubber Cures at room temperature within 5-46hours.
3. Liquid silicone rubber has An exceptional fluidity and good operability.
4. Liquid silicone rubber has good Temperature and deformation resistance as well as low shrinkage.
5. Liquid silicone rubber has High duplication times.
Operations for Liquid silicone rubber:
Step One to use Liquid silicone rubber: Take 100g of part A and add 2g of part B and mix the silicon rubber and the curing agent evenly.
Step Two to use Liquid silicone rubber: vacuum pumping
Without exception, this takes less than 10 minutes. Otherwise, it will cause cross linking reaction, and no more further steps will be available.
Step Three to use Liquid silicone rubber: Brushing cast & Perfusion Molding operation.
Similar models of Liquid silicone rubber HY6:
model Liquid silicone rubber HY620
model Liquid silicone rubber HY625
model Liquid silicone rubber HY628
model Liquid silicone rubber HY630
model Liquid silicone rubber HY638
model Liquid silicone rubber HY640
SHELF LIFE of Liquid silicone rubber:
Liquid silicone rubber's shelf life is Twelve(12) months from date of shipment when stored at 24 C in original unopened packages.
Any questions of Liquid silicone rubber, please feel free to contact Ms Tiffany:
TEL: 0086-755-89948294
FAX: 0086-755-89948030
MOBILE: 0086-15813726516
E-mail: hyz (at) szrl (dot) net
|
|
| » Posted by: Shenzhen Hong Ye Silicone Technology Co.,Ltd [China] |
|
|
|
|
|
[Sell]
Carbon Black N220,N330,N550,N660 |
|
|
Established in Jan 2004,Zaozhuang Xinyuan Chemical Industry co., Ltd is the leading manufacture and exporter of CARBON BLACK and PIGMENT CARBON BLACK in China. Our main products are series of carbon black used for many spaces,such as master batch,plastics,pvc pipe,inks,coating,sealants and rubber,etc. Main products we offered are carbon black N220, N330, N660, N550 and pigment carbon black.
Stable quality and good service is our uniform principle. We would like to build a long stable business relationship with more customers via our hard work in the future.
|
|
| » Posted by: Zaozhuang Xinyuan Chemical Industry CO., LTD [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 next»
|
|
|
