|
|
|
|
|
|
[Sell]
Manufacture of RTV pad printing silicone rubber |
|
|
Manufacture of RTV pad printing silicone rubber usages: Manufacture of RTV Pad Printing Silicone Rubber is mainly use for printing irregular patterns on plastic toys, shampoo, pen, glass, electroplating toys and trade makers and so on. Manufacture of RTV pad printing silicone rubber description Manufacture of RTV Pad Printing Silicone Rubber as a carrier which transfers patterns on the steel plate to the toys products surface. Manufacture of RTV pad printing silicone rubber features: 1) High print times 2) Abrasion resistance. 3) Good printing effects 4) Permanent and durable Manufacture of RTV pad printing silicone rubber operation instructions: Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly. Step Two: vacuum pumping Without exception, this step takes less than 10 minutes. Note: The time for vacuum-pumping should be less than 3-5 minutes. Otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated. Step Three: Pouring the vacuumed mixture into the original mold slowly, Shelf life for manufacture of RTV pad printing silicone rubber 8~10months, when stored in a dry & cool place under the room temperature 25. Packing for manufacture of RTV pad printing silicone rubber 20kgs/drum vacuumed packing For more information, please feel free to contact Ms. Susie Office No.: 0086-755-89212380 Mob: +86-18938867549 Skype: susie0017 Email: hysx(at)szrl(dot)net Welcome to our website www dot szrl dot net
|
|
» Posted by: SHENZHEN HONG YE JIE SILICONER RUBBER TECHNLOGY CO., LTD [China] |
|
|
|
|
|
[Sell]
Platinum cured silicone rubber |
|
|
Platinum cured silicone rubber description Platinum cure silicone rubber is a kind of FDA grade silicone, generally named two components silicone rubber with translucent appearance, Part A and part B mixing in 1:1. It?s suitable for molds making application. Platinum cure silicone rubber applications Platinum cure silicone rubber mainly used for making concrete stones, wax molds, PU molds, resin molds, gypsum casting, candle molding and chocolate , candy and any other food product molds making Platinum cure silicone rubber advantages 1) Non- shrinkage (less than 0.1%) 2) High tensile and tear strength with high copy times 3) Exceptional fluidity and good operability (mixing ratio at 1:1) 4) High temperature resistant in 250 Centigrade Platinum cure silicone rubber operation instructions Step One: Take 100g of part A and 100g of part B and mix in 1:1 and mix the two parts evenly. Step Two: vacuum pumping Without exception, this step takes less than 10 minutes. Note: The time for vacuum-pumping should be less than 3-5 minutes. Otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated. Step Three: Pouring the mixture into the frame with original mold slowly. Shelf life for platinum cured silicone rubber 8~10months, when stored in a dry & cool place under the room temperature 25. Packing for platinum cured silicone rubber 20kg/drum for part A+ 20kg/drum for part B in one set 200 kg/drum for part A+ 200kg/drum for part B in one set For more information, please feel free to contact Ms. Susie Office No.: 0086-755-89212380 Mob: +86-18938867549 Skype: susie0017 Email: hysx(at)szrl(dot)net Welcome to our website www dot szrl dot net
|
|
» Posted by: SHENZHEN HONG YE JIE SILICONER RUBBER TECHNLOGY CO., LTD [China] |
|
|
|
|
|
[Sell]
Silicone rubber for concrete molds |
|
|
Silicone rubber for concrete molds Silicone rubber for concrete molds applications 1. Silicone rubber is mainly used for concrete statue ,concrete veneer, concrete paving, concrete fountain , faux stone, man -made stone and all kinds of concrete products . Silicone rubber for concrete molds features Silicon rubber for concrete molds is white flowing liquid with general hardness of 22-50A?after curing with features ------ (1) high tensile & tear strength (2) high duplication times (3) Low linear shrinkage (4) resistance to high-temperature (5) Low shrinkage and non-deformation (6)resistance to acid-alkali and expansion Silicon rubber for concrete molds operation instructions Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly. Step Two: vacuum pumping Without exception, this step takes less than 10 minutes. Note: The time for vacuum-pumping should be less than 3?5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated. Step Three: Pouring the vacuumed silicone mixture into the frame with original concrete mold . Shelf life for silicon rubber concrete molds 10~12months, when stored in a dry & cool place under the room temperature 25. Packing for silicon rubber for concrete molds 1kg/ bottle , 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing,200 kg/drum For further information, pls contact with Miss Kimberly TEL: 0086-755-89948006 Mobile: 0086-13554758940 Mail : hyyf(at)szrl(dot)net Welcome to visit www (dot)szrl (dot)net anytime .
|
|
» Posted by: SHENZHEN HONG YE JIE TECHONOLOGY CO; LTD [China] |
|
|
|
|
|
[Sell]
Silicon rubber for mold making |
|
|
Silicon rubber for mold making Silicon rubber for mold making applications 1. Silicon rubber for mold making can used for poly resin crafts, PU crafts, PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy , stationery gifts crafts industry, 2. Silicon rubber for mold making is applicable for large statue Buddha, relieve ,furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold 3. Silicon rubber for mold making is intend for artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on. Silicon rubber for mold making features Silicon rubber for mold making is white flowing liquid with general hardness of 22-50A?after curing with features ------ (1) high tensile & tear strength (2) high duplication times (3) Low linear shrinkage (4) resistance to high-temperature (5) Low shrinkage and non-deformation (6)resistance to acid-alkali and expansion Silicon rubber for mold making operation instructions Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly. Step Two: vacuum pumping Without exception, this step takes less than 10 minutes. Note: The time for vacuum-pumping should be less than 3?5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated. Step Three: Brushing cast & Perfusion Molding operation Shelf life for silicon rubber for mold making 10~12months, when stored in a dry & cool place under the room temperature 25. Packing for silicon rubber for mold making 1kg/ bottle , 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing,200 kg/drum For further information, pls contact with Miss Kimberly TEL: 0086-755-89948006 Mobile: 0086-13554758940 Mail : hyyf(at)szrl(dot)net Welcome to visit www (dot)szrl (dot)net anytime .
|
|
» Posted by: SHENZHEN HONG YE JIE TECHONOLOGY CO; LTD [China] |
|
|
|
|
|
[Sell]
Platinum cured silicone rubber for tire mold |
|
|
Platinum cured silicone rubber for tire mold Description of platinum cured silicone rubber platinum cure silicone rubber is a kind of translucent liquid , generally named two-components silicone rubber with mixing in 1:1 .It is mainly suitable for tire molds making . Advantage of platinum cure silicone rubber for tire mold 1)Non- shrinkage 2)high tensile and tear strength with high copy times 3) exceptional fluidity and good operability (mixing ratio at 1:1 ) 4)high temperature resistant in 250 Centigrade Operation instruction of platinum cure silicone rubber for tire mold Step One: Take 100g of part A and 100g of part B and mix in 1:1 and mix the two part evenly. Step Two: vacuum pumping Without exception, this step takes less than 10 minutes. Note: The time for vacuum-pumping should be less than 3-5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated. Step Three: Pouring the mixture into the frame with original mold slowly . Shelf life for silicon rubber for mold making 8~10months, when stored in a dry & cool place under the room temperature 25. Packing for silicon rubber for mold making 20kg/drum for part A+ 20kg/drum for part B in one set ,200 kg/drum for part A+ 200kg/drum for part B in one set For further information, pls contact with Miss Kimberly TEL: 0086-755-89948006 Mobile: 0086-13554758940 Mail : hyyf(at)szrl(dot)net Welcome to visit www (dot)szrl (dot)net anytime .
|
|
» Posted by: SHENZHEN HONG YE JIE TECHONOLOGY CO; LTD [China] |
|
|
|
|
|
[Sell]
Platinum cured silicone rubber |
|
|
Platinum cured silicone rubber Description of platinum cured silicone rubber platinum cure silicone rubber is a kind of FDA grade silicone , generally named two-components silicone rubber with translucent appearance, Part A and part B mixing in 1:1 .It is suitable for molds making application. Applications of platinum cure silicone rubber Platinum cure silicone rubber mainly used for making concrete stones, wax molds, PU molds, resin molds, gypsum casting, candle molding and chocolate , candy and any other food product molds making Advantage of platinum cure silicone rubber 1)Non- shrinkage (less than 0.1% ) 2)high tensile and tear strength with high copy times 3) exceptional fluidity and good operability (mixing ratio at 1:1 ) 4)high temperature resistant in 250 Centigrade Operation instruction of platinum cure silicone rubber Step One: Take 100g of part A and 100g of part B and mix in 1:1 and mix the two part evenly. Step Two: vacuum pumping Without exception, this step takes less than 10 minutes. Note: The time for vacuum-pumping should be less than 3-5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated. Step Three: Pouring the mixture into the frame with original mold slowly . Shelf life for silicon rubber for mold making 8~10months, when stored in a dry & cool place under the room temperature 25. Packing for silicon rubber for mold making 20kg/drum for part A+ 20kg/drum for part B in one set ,200 kg/drum for part A+ 200kg/drum for part B in one set For further information, pls contact with Miss Kimberly TEL: 0086-755-89948006 Mobile: 0086-13554758940 Mail : hyyf(at)szrl(dot)net Welcome to visit www (dot)szrl (dot)net anytime .
|
|
» Posted by: SHENZHEN HONG YE JIE TECHONOLOGY CO; LTD [China] |
|
|
|
|
|
[Sell]
Silicon rubber for mold making |
|
|
Silicon rubber for mold making applications 1. Silicon rubber for mold making can used for poly resin crafts, PU crafts, PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy , stationery gifts crafts industry, 2. Silicon rubber for mold making is applicable for large statue Buddha, relieve ,furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold 3. Silicon rubber for mold making is intend for artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on. Silicon rubber for mold making features Silicon rubber for mold making is white flowing liquid with general hardness of 22-50A?after curing with features ------ high tensile & tear strength high duplication times Low linear shrinkage resistance to high-temperature Low shrinkage and non-deformation (6) resistance to acid-alkali and expansion Silicon rubber for mold making operation instructions Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly. Step Two: vacuum pumping Without exception, this step takes less than 10 minutes. Note: The time for vacuum-pumping should be less than 3?5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated. Step Three: Brushing cast & Perfusion Molding operation Shelf life for silicon rubber for mold making 10~12months, when stored in a dry & cool place under the room temperature 25. Packing for silicon rubber for mold making 1kg/ bottle , 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing,200 kg/drum For more information , pls feel free to contact Ms Mabel office no. :0086-755-89948019 Mob:86-18929239655 Skype: mabel9166 Email :hyh(at)szrl(dot)net Welcome to our website www dot szrl dot net
|
|
» Posted by: SHENZHEN HONG YE JIE TECHONOLOGY CO LTD [China] |
|
|
|
|
|
[Sell]
platinum cured silicone rubber |
|
|
Description of platinum cured silicone rubber platinum cure silicone rubber is a kind of translucent liquid , generally named two-components silicone rubber with mixing in 1:1 .It?s mainly suitable for tire molds making . Advantage of platinum cure silicone rubber for tire mold 1)Non- shrinkage 2)high tensile and tear strength with high copy times 3) exceptional fluidity and good operability (mixing ratio at 1:1 ) 4)high temperature resistant in 250 Centigrade Operation instruction of platinum cure silicone rubber for tire mold Step One: Take 100g of part A and 100g of part B and mix in 1:1 and mix the two part evenly. Step Two: vacuum pumping Without exception, this step takes less than 10 minutes. Note: The time for vacuum-pumping should be less than 3?5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated. Step Three: Pouring the mixture into the frame with original mold slowly . Shelf life for silicon rubber for mold making 8~10months, when stored in a dry & cool place under the room temperature 25. Packing for silicon rubber for mold making 20kg/drum for part A+ 20kg/drum for part B in one set ,200 kg/drum for part A+ 200kg/drum for part B in one set For more information , pls feel free to contact Ms Mabel office no. :0086-755-89948019 Mob:86-18929239655 Skype: mabel9166 Email :hyh(at)szrl(dot)net Welcome to our website www dot szrl dot net
|
|
» Posted by: SHENZHEN HONG YE JIE TECHONOLOGY CO LTD [China] |
|
|
|
|
|
[Sell]
Pad Printing Silicon Rubber |
|
|
Pad Printing Silicon Rubber Usages: ? Pad printing silicone rubber?is mainly use for?printing irregular patterns on plastic toys, shampoo, pen, glass ,electroplating toys and trade makers and so on . Pad Printing Silicon Rubber description Pad printing silicone rubber as a carrier which transfer patterns on the steel plate to the toys products surface. . Pad Printing Silicon Rubber Features: ? High print times abrasion resistance.? Good printing effects Permanent and durable Pad Printing Silicon Rubber Operation Instructions:?. Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly. Step Two: vacuum pumping Without exception, this step takes less than 10 minutes. Note: The time for vacuum-pumping should be less than 3?5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated. Step Three: Pouring the vacuumed mixture into the original mold slowly, Shelf life for silicon rubber for mold making 8~10months, when stored in a dry & cool place under the room temperature 25. Packing for silicon rubber for mold making 20kgsFor more information , pls feel free to contact Ms Mabel office no. :0086-755-89948019 Mob:86-18929239655 Skype: mabel9166 Email :hyh(at)szrl(dot)net Welcome to our website www dot szrl dot net /drum vacuumed packing
|
|
» Posted by: SHENZHEN HONG YE JIE TECHONOLOGY CO LTD [China] |
|
|
|
|
|
[Sell]
Platinum cured silicone rubber |
|
|
Description of platinum cured silicone rubber platinum cure silicone rubber is a kind of FDA grade silicone , generally named two-components silicone rubber with translucent appearance, Part A and part B mixing in 1:1 .It?s suitable for molds making application. Applications of platinum cure silicone rubber Platinum cure silicone rubber mainly used for making concrete stones, wax molds, PU molds, resin molds, gypsum casting, candle molding and chocolate , candy and any other food product molds making Advantage of platinum cure silicone rubber 1)Non- shrinkage (less than 0.1% ) 2)high tensile and tear strength with high copy times 3) exceptional fluidity and good operability (mixing ratio at 1:1 ) 4)high temperature resistant in 250 Centigrade Operation instruction of platinum cure silicone rubber Step One: Take 100g of part A and 100g of part B and mix in 1:1 and mix the two part evenly. Step Two: vacuum pumping Without exception, this step takes less than 10 minutes. Note: The time for vacuum-pumping should be less than 3?5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated. Step Three: Pouring the mixture into the frame with original mold slowly . Shelf life for silicon rubber for mold making 8~10months, when stored in a dry & cool place under the room temperature 25. Packing for silicon rubber for mold making 20kg/drum for part A+ 20kg/drum for part B in one set ,200 kg/drum for part A+ 200kg/drum for part B in one set For more information , pls feel free to contact Ms Mabel office no. :0086-755-89948019 Mob:86-18929239655 Skype: mabel9166 Email :hyh(at)szrl(dot)net Welcome to our website www dot szrl dot net
|
|
» Posted by: SHENZHEN HONG YE JIE TECHONOLOGY CO LTD [China] |
|
|
|
|
|
[Sell]
Liquid Silicone rubber for gypsum molds |
|
|
Liquid Silicone rubber for gypsum applications 1. Liquid Silicone rubber can used for gypsum crafts, gypsum statues , gypsum ceiling rose , gypsum columns , gypsum line , gypsum ceiling board ,and all kinds of gypsum decorations . Liquid Silicone rubber for gypsum features Liquid Silicone rubber is two part silicone with general hardness of 22-50A?after curing with features ------ high tensile & tear strength high duplication times Low linear shrinkage resistance to high-temperature Low shrinkage and non-deformation resistance to acid-alkali and expansion Liquid Silicone rubber for gypsum operation instructions Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly. Step Two: vacuum pumping Without exception, this step takes less than 10 minutes. Note: The time for vacuum-pumping should be less than 3?5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated. Step Three: Pouring the mixture into the frame with original gypsum mold slowly . Shelf life for Liquid Silicone rubber 10~12months, when stored in a dry & cool place under the room temperature 25. Packing for Liquid Silicone rubber 1kg/ bottle , 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing,200 kg/drum |
|
» Posted by: SHENZHEN HONG YE JIE TECHONOLOGY CO LTD [China] |
|
|
|
|
|
[Sell]
Silicon rubber for mold making |
|
|
Silicon rubber for mold making applications 1. Silicon rubber for mold making can used for poly resin crafts, PU crafts, PU resin crafts, gypsum crafts ,unsaturated resin crafts, lighting and candles crafts, plastic toy, stationery gifts crafts industry, 2. Silicon rubber for mold making is applicable for large statue Buddha, relieve ,furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold 3. Silicon rubber for mold making is intend for artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.
|
|
» Posted by: Shenzhen Hong Ye Jie Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Platinum cured silicone rubber for tire mold |
|
|
Description of platinum cured silicone rubber: Platinum cure silicone rubber is a kind of translucent liquid, generally named two components silicone rubber with mixing in 1:1. It?s mainly suitable for tire molds making. Advantage of platinum cure silicone rubber for tire mold: 1) Non-shrinkage 2) High tensile and tear strength with high copy times 3) Exceptional fluidity and good operability (mixing ratio at 1:1) 4) High temperature resistant in 250 Centigrade
|
|
» Posted by: Shenzhen Hong Ye Jie Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Platinum cured silicone rubber |
|
|
Description of platinum cured silicone rubber Platinum cure silicone rubber is a kind of FDA grade silicone, generally named two-components silicone rubber with translucent appearance, Part A and part B mixing in 1:1. It?s suitable for molds making application. Applications of platinum cure silicone rubber Platinum cure silicone rubber mainly used for making concrete stones, wax molds, PU molds, resin molds, gypsum casting, candle molding and chocolate, candy and any other food product molds making
|
|
» Posted by: Shenzhen Hong Ye Jie Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Pad Printing Silicon Rubber |
|
|
Pad Printing Silicon Rubber Usages: Pad printing silicone rubber is mainly used for printing irregular patterns on plastic toys, shampoo, pen, glass, electroplating toys and trade makes and so on. Pad Printing Silicon Rubber description Pad printing silicone rubber as a carrier which transfers patterns on the steel plate to the toys products surface. Pad Printing Silicon Rubber Features: 1)High print times 2)Abrasion resistance. 3)Good printing effects 4)Permanent and durable For further information, pls contact with Miss Cecilia TEL: 086-0755-89948013 Mobile: 086-15273276985 Mail : hyyi(at)szrl(dot)net Welcome to visit www (dot)szrl (dot)net anytime .
|
|
» Posted by: Shenzhen Hong Ye Jie Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Liquid Silicone rubber for gypsum molds |
|
|
Liquid Silicone rubber for gypsum applications 1. Liquid Silicone rubber can used for gypsum crafts, gypsum statues , gypsum ceiling rose , gypsum columns , gypsum line , gypsum ceiling board ,and all kinds of gypsum decorations . Liquid Silicone rubber for gypsum features Liquid Silicone rubber is two part silicone with general hardness of 22-50 shore A after curing with features : (1) high tensile & tear strength (2) high duplication times (3) Low linear shrinkage (4) resistance to high-temperature (5) Low shrinkage and non-deformation (6)resistance to acid-alkali and expansion For more information, pls feel free to contact Ms Cecilia Office No.: 086-0755-89948013 Mob: 86-15273276985 Skype: summertaoteng Email: hyyi(at)szrl(dot)net Welcome to our website www dot szrl dot net
|
|
» Posted by: Shenzhen Hong Ye Jie Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Liquid Silicone rubber for gypsum molds |
|
|
Liquid Silicone rubber for gypsum applications 1. Liquid Silicone rubber can used for gypsum crafts, gypsum statues , gypsum ceiling rose , gypsum columns , gypsum line , gypsum ceiling board ,and all kinds of gypsum decorations . Liquid Silicone rubber for gypsum features Liquid Silicone rubber is two part silicone with general hardness of 22-50A?after curing with features (1) high tensile & tear strength (2) high duplication times (3) Low linear shrinkage (4) resistance to high-temperature (5) Low shrinkage and non-deformation (6)resistance to acid-alkali and expansion Liquid Silicone rubber for gypsum operation instructions Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly. Step Two: vacuum pumping Without exception, this step takes less than 10 minutes. Note: The time for vacuum-pumping should be less than 3 to 5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated. Step Three: Pouring the mixture into the frame with original gypsum mold slowly . Shelf life for Liquid Silicone rubber 10 to 12months, when stored in a dry and cool place under the room temperature 25. Packing for Liquid Silicone rubber 1kg/ bottle , 5 kg per drum vacuumed packing, 25kgs per drum vacuumed packing,200 kg per drum For more information , pls feel free to contact Mr. Choice office no. :0086-755-89948013 Mob:86-15200358715 Skype: CDlove-cho.ice Email :hyyc(at)szrl(dot)net Welcome to our website www dot szrl dot net
|
|
» Posted by: SHENZHEN HONG YE JIE TECHONOLOGY CO; LTD. [China] |
|
|
|
|
|
[Sell]
Platinum cured silicone rubber |
|
|
Description of platinum cured silicone rubber platinum cure silicone rubber is a kind of FDA grade silicone , generally named two-components silicone rubber with translucent appearance, Part A and part B mixing in 1:1 .It?s suitable for molds making application. Applications of platinum cure silicone rubber Platinum cure silicone rubber mainly used for making concrete stones, wax molds, PU molds, resin molds, gypsum casting, candle molding and chocolate , candy and any other food product molds making Advantage of platinum cure silicone rubber 1)Non- shrinkage (less than 0.1% ) 2)high tensile and tear strength with high copy times 3) exceptional fluidity and good operability (mixing ratio at 1:1 ) 4)high temperature resistant in 250 Centigrade Operation instruction of platinum cure silicone rubber Step One: Take 100g of part A and 100g of part B and mix in 1:1 and mix the two part evenly. Step Two: vacuum pumping Without exception, this step takes less than 10 minutes. Note: The time for vacuum-pumping should be less than 3?5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated. Step Three: Pouring the mixture into the frame with original mold slowly . Shelf life for silicon rubber for mold making 8~10months, when stored in a dry & cool place under the room temperature 25. Packing for silicon rubber for mold making 20kg/drum for part A+ 20kg/drum for part B in one set ,200 kg/drum for part A+ 200kg/drum for part B in one set Any more information , pls feel free to contact Mr. Choice office no. :0086-755-89948013 Mob:86-15200358715 Skype: CDlove-cho.ice Email :hyyc(at)szrl(dot)net Welcome to our website www dot szrl dot net
|
|
» Posted by: SHENZHEN HONG YE JIE TECHONOLOGY CO; LTD. [China] |
|
|
|
|
|
[Sell]
Pad Printing Silicon Rubber |
|
|
Pad Printing Silicon Rubber Usages: Pad printing silicone rubber is mainly use for printing irregular patterns on plastic toys, shampoo, pen, glass ,electroplating toys and trade makers and so on . Pad Printing Silicon Rubber description Pad printing silicone rubber as a carrier which transfer patterns on the steel plate to the toys products surface. . Pad Printing Silicon Rubber Features: 1) High print times 2) abrasion resistance. 3) Good printing effects 4) Permanent and durable Pad Printing Silicon Rubber Operation Instructions: . Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly. Step Two: vacuum pumping Without exception, this step takes less than 10 minutes. Note: The time for vacuum-pumping should be less than 3 to 5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated. Step Three: Pouring the vacuumed mixture into the original mold slowly, Shelf life for silicon rubber for mold making 8 to 10months, when stored in a dry and cool place under the room temperature 25. Packing for silicon rubber for mold making 20kgs per drum vacuumed packing For further information, pls contact with Mr. Choice office no. :0086-755-89948013 Mob:86-15200358715 Skype: CDlove-cho.ice Email :hyyc(at)szrl(dot)net Welcome to our website www dot szrl dot net
|
|
» Posted by: SHENZHEN HONG YE JIE TECHONOLOGY CO; LTD. [China] |
|
|
|
|
|
[Sell]
Silicon rubber for mold making |
|
|
Silicon rubber for mold making Silicon rubber for mold making applications 1. Silicon rubber for mold making can used for poly resin crafts, PU crafts, PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy , stationery gifts crafts industry, 2. Silicon rubber for mold making is applicable for large statue Buddha, relieve ,furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold 3. Silicon rubber for mold making is intend for artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on. Silicon rubber for mold making features Silicon rubber for mold making is white flowing liquid with general hardness of 22-50A?after curing with features ------ (1) high tensile & tear strength (2) high duplication times (3) Low linear shrinkage (4) resistance to high-temperature (5) Low shrinkage and non-deformation (6)resistance to acid-alkali and expansion Silicon rubber for mold making operation instructions Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly. Step Two: vacuum pumping Without exception, this step takes less than 10 minutes. Note: The time for vacuum-pumping should be less than 3?5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated. Step Three: Brushing cast & Perfusion Molding operation Shelf life for silicon rubber for mold making 10~12months, when stored in a dry & cool place under the room temperature 25. Packing for silicon rubber for mold making 1kg/ bottle , 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing,200 kg/drum Any more information , pls feel free to contact Mr. Young office no. :0086-755-89212365 Mob:86-18824631337 Skype: Dirk_Young Email :hyya(at)szrl(dot)net Welcome to our website www dot szrl dot net
|
|
» Posted by: Shenzhen Hong Ye Jie Techonology Co;LTD [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 next»
|
|
|