|
|
|
|
|
|
|
[Sell]
Platinum cured silicone rubber |
 |
|
Platinum cured silicone rubber
Description of platinum cured silicone rubber
platinum cure silicone rubber is a kind of FDA grade silicone , generally named two-components silicone rubber with translucent appearance, Part A and part B mixing in 1:1 .It?s suitable for molds making application.
Applications of platinum cure silicone rubber
Platinum cure silicone rubber mainly used for making concrete stones, wax molds, PU molds, resin molds, gypsum casting, candle molding and chocolate , candy and any other food product molds making
Advantage of platinum cure silicone rubber
1)Non- shrinkage (less than 0.1% )
2)high tensile and tear strength with high copy times
3) exceptional fluidity and good operability (mixing ratio at 1:1 )
4)high temperature resistant in 250 Centigrade
Operation instruction of platinum cure silicone rubber
Step One: Take 100g of part A and 100g of part B and mix in 1:1 and mix the two part evenly.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3?5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Pouring the mixture into the frame with original mold slowly .
Shelf life for silicon rubber for mold making
8~10months, when stored in a dry & cool place under the room temperature 25.
Packing for silicon rubber for mold making
20kg/drum for part A+ 20kg/drum for part B in one set
,200 kg/drum for part A+ 200kg/drum for part B in one set
Any more information , pls feel free to contact Mr. Young
office no. :0086-755-89212365
Mob:86-18824631337
Skype: Dirk_Young
Email :hyya(at)szrl(dot)net
Welcome to our website www dot szrl dot net
|
|
» Posted by: Shenzhen Hong Ye Jie Techonology Co;LTD [China]  |
|
|
|
|
|
[Sell]
Platinum cured silicone rubber for tire mold |
|
|
Platinum cured silicone rubber for tire mold
Description of platinum cured silicone rubber
platinum cure silicone rubber is a kind of translucent liquid , generally named two-components silicone rubber with mixing in 1:1 .It?s mainly suitable for tire molds making .
Advantage of platinum cure silicone rubber for tire mold
1)Non- shrinkage
2)high tensile and tear strength with high copy times
3) exceptional fluidity and good operability (mixing ratio at 1:1 )
4)high temperature resistant in 250 Centigrade
Operation instruction of platinum cure silicone rubber for tire mold
Step One: Take 100g of part A and 100g of part B and mix in 1:1 and mix the two part evenly.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3?5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Pouring the mixture into the frame with original mold slowly .
Shelf life for silicon rubber for mold making
8~10months, when stored in a dry & cool place under the room temperature 25.
Packing for silicon rubber for mold making
20kg/drum for part A+ 20kg/drum for part B in one set
,200 kg/drum for part A+ 200kg/drum for part B in one set
Any more information , pls feel free to contact Mr. Young
office no. :0086-755-89212365
Mob:86-18824631337
Skype: Dirk_Young
Email :hyya(at)szrl(dot)net
Welcome to our website www dot szrl dot net
|
|
| » Posted by: Shenzhen Hong Ye Jie Techonology Co;LTD [China] |
|
|
|
|
|
[Sell]
Pad Printing Silicon Rubber |
|
|
Liquid Silicone rubber for gypsum molds
Liquid Silicone rubber for gypsum applications
1. Liquid Silicone rubber can used for gypsum crafts, gypsum statues , gypsum ceiling rose , gypsum columns , gypsum line , gypsum ceiling board ,and all kinds of gypsum decorations .
Liquid Silicone rubber for gypsum features
Liquid Silicone rubber is two part silicone with general hardness of 22-50A?after curing with features ------
(1) high tensile & tear strength
(2) high duplication times
(3) Low linear shrinkage
(4) resistance to high-temperature
(5) Low shrinkage and non-deformation
(6)resistance to acid-alkali and expansion
Liquid Silicone rubber for gypsum operation instructions
Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3?5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Pouring the mixture into the frame with original gypsum mold slowly .
Shelf life for Liquid Silicone rubber
10~12months, when stored in a dry & cool place under the room temperature 25.
Packing for Liquid Silicone rubber
1kg/ bottle , 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing,200 kg/drum
Any more information , pls feel free to contact Mr. Young
office no. :0086-755-89212365
Mob:86-18824631337
Skype: Dirk_Young
Email :hyyaATszrl(dot)net
Welcome to our website 3wdotszrldot net
|
|
| » Posted by: Shenzhen Hong Ye Jie Techonology Co;LTD [China] |
|
|
|
|
|
[Sell]
Liquid Silicone rubber for gypsum molds |
|
|
Liquid Silicone rubber for gypsum molds
Liquid Silicone rubber for gypsum applications
1. Liquid Silicone rubber can used for gypsum crafts, gypsum statues , gypsum ceiling rose , gypsum columns , gypsum line , gypsum ceiling board ,and all kinds of gypsum decorations .
Liquid Silicone rubber for gypsum features
Liquid Silicone rubber is two part silicone with general hardness of 22-50A?after curing with features ------
(1) high tensile & tear strength
(2) high duplication times
(3) Low linear shrinkage
(4) resistance to high-temperature
(5) Low shrinkage and non-deformation
(6)resistance to acid-alkali and expansion
Liquid Silicone rubber for gypsum operation instructions
Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3?5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Pouring the mixture into the frame with original gypsum mold slowly .
Shelf life for Liquid Silicone rubber
10~12months, when stored in a dry & cool place under the room temperature 25.
Packing for Liquid Silicone rubber
1kg/ bottle , 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing,200 kg/drum
Any more information , pls feel free to contact Mr. Young
office no. :0086-755-89212365
Mob:86-18824631337
Skype: Dirk_Young
Email :hyyaATszrl(dot)net
Welcome to our website 3wdotszrldot net
|
|
| » Posted by: Shenzhen Hong Ye Jie Techonology Co;LTD [China] |
|
|
|
|
|
[Sell]
Silicon rubber for mold making |
|
|
Silicon rubber for mold making applications
1. Silicon rubber for mold making can used for poly resin crafts, PU crafts, PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy , stationery gifts crafts industry,
2. Silicon rubber for mold making is applicable for large statue Buddha, relieve ,furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold
3. Silicon rubber for mold making is intend for artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.
Silicon rubber for mold making features
Silicon rubber for mold making is white flowing liquid with general hardness of 22-50A?after curing with features ------
(1) high tensile & tear strength
(2) high duplication times
(3) Low linear shrinkage
(4) resistance to high-temperature
(5) Low shrinkage and non-deformation
(6)resistance to acid-alkali and expansion
Silicon rubber for mold making operation instructions
Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3?5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Brushing cast & Perfusion Molding operation
Shelf life for silicon rubber for mold making
10~12months, when stored in a dry & cool place under the room temperature 25.
Packing for silicon rubber for mold making
1kg/ bottle , 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing,200 kg/drum
For more information , pls feel free to contact sophia office
no. :0086-755-89212365
Skype: sophia2013718
Email :hyyh(at)szrl(dot)net
Welcome to our website www dot szrl dot net
|
|
| » Posted by: SHENZHEN HONG YE JIE TECHONOLOGY CO; LTD. [China] |
|
|
|
|
|
[Sell]
Platinum cured silicone rubber for tire mold |
|
|
Description of platinum cured silicone rubber
platinum cure silicone rubber is a kind of translucent liquid , generally named two-components silicone rubber with mixing in 1:1 .It?s mainly suitable for tire molds making .
Advantage of platinum cure silicone rubber for tire mold
1)Non- shrinkage
2)high tensile and tear strength with high copy times
3) exceptional fluidity and good operability (mixing ratio at 1:1 )
4)high temperature resistant in 250 Centigrade
Operation instruction of platinum cure silicone rubber for tire mold
Step One: Take 100g of part A and 100g of part B and mix in 1:1 and mix the two part evenly.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3?5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Pouring the mixture into the frame with original mold slowly .
Shelf life for silicon rubber for mold making
8~10months, when stored in a dry & cool place under the room temperature 25.
Packing for silicon rubber for mold making
20kg/drum for part A+ 20kg/drum for part B in one set
,200 kg/drum for part A+ 200kg/drum for part B in one set
For more information , pls feel free to contact sophia office
no. :0086-755-89212365
Skype: sophia2013718
Email :hyyh(at)szrl(dot)net
Welcome to our website www dot szrl dot net
|
|
| » Posted by: SHENZHEN HONG YE JIE TECHONOLOGY CO; LTD. [China] |
|
|
|
|
|
[Sell]
Pad Printing Silicon Rubber |
|
|
Pad Printing Silicon Rubber Usages:
Pad printing silicone rubber is mainly use for printing irregular patterns on plastic toys, shampoo, pen, glass ,electroplating toys and trade makers and so on .
Pad Printing Silicon Rubber description
Pad printing silicone rubber as a carrier which transfer patterns on the steel plate to the toys products surface.
.
Pad Printing Silicon Rubber Features:
1) High print times
2) abrasion resistance.
3) Good printing effects
4) Permanent and durable
Pad Printing Silicon Rubber Operation Instructions:
. Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3?5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Pouring the vacuumed mixture into the original mold slowly,
Shelf life for silicon rubber for mold making
8~10months, when stored in a dry & cool place under the room temperature 25.
Packing for silicon rubber for mold making
20kgs/drum vacuumed packing
For more information , pls feel free to contact sophia office
no. :0086-755-89212365
Skype: sophia2013718
Email :hyyh(at)szrl(dot)net
Welcome to our website www dot szrl dot net
|
|
| » Posted by: SHENZHEN HONG YE JIE TECHONOLOGY CO; LTD. [China] |
|
|
|
|
|
[Sell]
Platinum cured silicone rubber |
|
|
Description of platinum cured silicone rubber
platinum cure silicone rubber is a kind of FDA grade silicone , generally named two-components silicone rubber with translucent appearance, Part A and part B mixing in 1:1 .It?s suitable for molds making application.
Applications of platinum cure silicone rubber
Platinum cure silicone rubber mainly used for making concrete stones, wax molds, PU molds, resin molds, gypsum casting, candle molding and chocolate , candy and any other food product molds making
Advantage of platinum cure silicone rubber
1)Non- shrinkage (less than 0.1% )
2)high tensile and tear strength with high copy times
3) exceptional fluidity and good operability (mixing ratio at 1:1 )
4)high temperature resistant in 250 Centigrade
Operation instruction of platinum cure silicone rubber
Step One: Take 100g of part A and 100g of part B and mix in 1:1 and mix the two part evenly.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3?5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Pouring the mixture into the frame with original mold slowly .
Shelf life for silicon rubber for mold making
8~10months, when stored in a dry & cool place under the room temperature 25.
Packing for silicon rubber for mold making
20kg/drum for part A+ 20kg/drum for part B in one set
,200 kg/drum for part A+ 200kg/drum for part B in one set
For more information , pls feel free to contact sophia office
no. :0086-755-89212365
Skype: sophia2013718
Email :hyyh(at)szrl(dot)net
Welcome to our website www dot szrl dot net
|
|
| » Posted by: SHENZHEN HONG YE JIE TECHONOLOGY CO; LTD. [China] |
|
|
|
|
|
[Sell]
Silicone rubber for concrete molds |
|
|
Silicone rubber for concrete molds applications
1. Silicone rubber is mainly used for concrete statue ,concrete veneer, concrete paving, concrete fountain , faux stone, man -made stone and all kinds of concrete products .
Silicone rubber for concrete molds features
Silicon rubber for concrete molds is white flowing liquid with general hardness of 22-50A?after curing with features ------
(1) high tensile & tear strength
(2) high duplication times
(3) Low linear shrinkage
(4) resistance to high-temperature
(5) Low shrinkage and non-deformation
(6)resistance to acid-alkali and expansion
Silicon rubber for concrete molds operation instructions
Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3?5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Pouring the vacuumed silicone mixture into the frame with original concrete mold .
Shelf life for silicon rubber concrete molds
10~12months, when stored in a dry & cool place under the room temperature 25.
Packing for silicon rubber for concrete molds
1kg/ bottle , 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing,200 kg/drum
For more information , pls feel free to contact sophia office
no. :0086-755-89212365
Skype: sophia2013718
Email :hyyh(at)szrl(dot)net
Welcome to our website www dot szrl dot net
|
|
| » Posted by: SHENZHEN HONG YE JIE TECHONOLOGY CO; LTD. [China] |
|
|
|
|
|
[Sell]
Liquid Silicone rubber for gypsum molds |
|
|
Liquid Silicone rubber for gypsum applications
1. Liquid Silicone rubber can used for gypsum crafts, gypsum statues , gypsum ceiling rose , gypsum columns , gypsum line , gypsum ceiling board ,and all kinds of gypsum decorations .
Liquid Silicone rubber for gypsum features
Liquid Silicone rubber is two part silicone with general hardness of 22-50A?after curing with features ------
(1) high tensile & tear strength
(2) high duplication times
(3) Low linear shrinkage
(4) resistance to high-temperature
(5) Low shrinkage and non-deformation
(6)resistance to acid-alkali and expansion
Liquid Silicone rubber for gypsum operation instructions
Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3?5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Pouring the mixture into the frame with original gypsum mold slowly .
Shelf life for Liquid Silicone rubber
10~12months, when stored in a dry & cool place under the room temperature 25.
Packing for Liquid Silicone rubber
1kg/ bottle , 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing,200 kg/drum
For more information , pls feel free to contact sophia office
no. :0086-755-89212365
Skype: sophia2013718
Email :hyyh(at)szrl(dot)net
Welcome to our website www dot szrl dot net
|
|
| » Posted by: SHENZHEN HONG YE JIE TECHONOLOGY CO; LTD. [China] |
|
|
|
|
|
[Sell]
Spiral Wire High Pressure Hose |
|
|
Our company can supply spiral wire high pressure hose including four spiral wire high pressure hose, multi-spiral high pressure hose and spiral wire reinforced high pressure hose.
Four spiral wire high pressure hose Our spiral wire high pressure hose consists of three parts: seamless oil resistant neoprene rubber tube, spiral plies of high tensile steel wire, and synthetic rubber that is resistant to oil, abrasion and weather.
The temperature ranges from -40?C to +121?C (-40?F to 250?F).
The hose can be operated at high working pressures and because of this it finds its applications on modern construction, marine, mining, and forestry equipment. It?s very flexible and the length can be customized.
Nominal specifications:
Size code I.D. O.D. WP(psi) Burst Pressure Bend radius Weight (lbs./100ft)
in mm in mm psi in mm
6 3/8 9.5 0.84 21.34 6450 25800 7.0 178 53
8 1/2 12.7 0.96 24.38 6000 27550 9.0 228 60
12 3/4 19.0 1.26 32.00 6000 25370 11.0 279 101
16 1 25.4 1.50 38.10 5500 25370 13.5 342 137
20 1-1/4 31.8 1.78 45.21 5000 20300 18.0 457 165
Construction:
Black and oil resistant synthetic rubber tube, synthetic rubber cover and four layers spirally wrapped high tensile steel wire reinforcement. It is weather, oil, fuel, ozone and abrasion-resistant.
Four layer wire sprial reinforced high pressure hose
Application:
It can be used in petroleum-based high pressure fluids of very high pressure and tight bends because of extraordinary flexibility, excellent bend radius properties and exceptional impulse life. The working temperature can up to +125?C.
Specifications:
Size code
I.D. O.D.
WP (psi) Burst Pressure Bend radius
Weight (lbs./100ft)
in mm in mm psi in mm
12 3/4 19.0 1.26 32.0 5000 20000 9.5 241 113
16 1 25.4 1.52 38.6 5000 20000 12.0 305 135
20 1-1/4 31.8 1.96 49.7 5000 20000 16.5 419 241
24 1-1/2 38.1 2.26 57.4 5000 20000 20.0 508 321
32 2 50.8 2.79 70.8 5000 20000 25.0 635 444
Multi-spiral high pressure hose
This multi-spiral hose is used in extreme pressure applications where high working pressures and superior resistance to impulsion are required. The working machines can be heavy duty types due to the multi-spiral construction of the high pressure hose.
Reinforcement: six or more spiral plies of high tensile steel wire.
Nominal specifications:
Size code
I.D.
O.D.
WP (psi) Burst Pressure
Bend radius
Weight (lbs./100ft)
in mm in mm psi in mm
12 3/4 19.0 1.26 32.0 5000 20000 9.5 241 113
16 1 25.4 1.52 38.6 5000 20000 12.0 305 135
20 1-1/4 31.8 1.96 49.7 5000 20000 16.5 419 241
24 1-1/2 38.1 2.26 57.4 5000 20000 20.0 508 321
32 2 50.8 2.79 70.8 5000 20000 25.0 635 444 |
|
| » Posted by: Kachet High Pressure Hose Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Wire Braided High Pressure Hose |
|
|
Wire braid high pressure hoses consist of many types in term of the layer number. Here we will introduce two kinds of wire braid hoses, namely high pressure single wire braid hose and double wire braid hose. Steel wire braid high pressure hose can be used to transport gas and hydraulic fluids in the relatively high pressure and temperature, such as hot oil, grease, crude oils, air and water. They are widely used in the fields of mine hydraulic bracket, automatic hydraulic systems of oil field exploiting machine, mine projects and other industrial sectors, especially used as jackhammer component. It can work in the temperature of -40?C to +100?C, and the maximum temperature can be +125?C. If you want more information, visit the page of technical parameters of wire braid high pressure hose.
Single wire braid hoses
In order to provide flexible connections in high pressure and temperature working systems our single braid hoses are made of three parts: oil resistant synthetic rubber lining, single wire braid reinforcement and rubber cover that are oil, fuel and abrasion resistant.
Nominal specifications:
I.D. O.D. W.P. WEIGHT
INCH/MM MM PSI BAR KG/MT
3/16? (5mm) 11.8 3630 250 0.17
1/4? (6mm) 13.4 3270 225 0.22
5/16? (8mm) 15 3120 215 0.25
3/8? (10mm) 17.4 2610 180 0.33
1/2? (13mm) 20.6 2320 160 0.42
5/8? (16mm) 23.7 1890 130 0.51
3/4? (19mm) 27.7 1530 105 0.65
1? (25mm) 35.6 1280 88 1.05
1-1/4? (32mm) 43.5 920 63 1.19
1-1/2? (38mm) 50.6 730 50 1.61
2? (51mm) 64 580 40 2.05
Double wire braid hoses
In order to have a better tolerance in the severe high pressure and temperature working environment, our company offer double wire braid high pressure hoses to compensate for the weakness of single wire braid hoses. They can give you a measure of safety and higher working pressure.
Applications:
Double wire braid high pressure hose is widely used in the daily life and industry because its features of moderate price, large scope of applications and providing of a measure of safety.
This product can withstand very high temperature, pressure and vacuum. All possibilities of burst have been reduced to a great extent due to the fabrication of the second wire braid.
Double wire braids high pressure hose construction:
Oil resistant synthetic rubber tube, two wire braid reinforcement and oil, fuel, weather and abrasion resistant synthetic rubber cover.
Nominal specifications:
ID OD WP WEIGHT
INCH/MM MM PSI BAR KG/MT
3/16? (5mm) 13.4 6000 420 0.29
1/4? (6mm) 15 5800 400 0.35
5/16? (8mm) 16.7 5000 350 0.39
3/8? (10mm) 19.1 4800 330 0.51
1/2? (13mm) 22.2 4000 280 0.62
5/8? (16mm) 25.4 3630 250 0.76
3/4? (19mm) 29.3 3120 215 0.97
1? (25mm) 38.1 2400 165 1.52
1-1/4? (32mm) 48.3 1820 125 1.88
1-1/2? (38mm) 54.6 1310 90 2.15
2? (51mm) 67.4 1160 80 2.95 |
|
| » Posted by: Kachet High Pressure Hose Co., Ltd. [China] |
|
|
|
|
|
[Sell]
High Pressure Steam Hose |
|
|
For hot water and saturated steam, high pressure air hose and water hose cannot handle, our high pressure steam hoses with steel wire braids are given the best solutions.
Products Specifications:
Standard: they are in accord with European standard and ISO standard.
Construction: the tube is made of black and smooth butyl, the reinforcement is steel wire braid, and the cover is EPDM, black, fabric finish, perforated with red marking according to EN standard
Operating pressure: 18 bar (180 bar burst pressure at 20?C)
Temperature range: -40?C to max. 210 ?C
Standard roll length: 40m, special lengths are available on request
Single wire steam hose
Construction:
Tube: made of nitrile, black color and oil, heat resistance.
Reinforcement: single high tensile steel wire braid
Cover: made of rubber, black color, resistant to oil and heat.
Technical parameters:
Size ID (IN.) Wire Braids OD (IN.) Approximate Weight Pounds Per 100 Ft. Working Pressure (PSI)
1/2 1 1 52 150
3/4 1-1/4 1 68 150
1 1-1/2 1 90 150
Double wire steam hose
Construction:
Tube: made of EPDM, black color and oil, heat resistance. The working pressure can up to 250psi.
Reinforcement: double high tensile steel wire braid
Cover: made of EPDM, black color, resistant to oil and heat with a fabric impression.
Technical parameters:
Size ID (IN.) Wire Braids OD (IN.) Approximate Weight Pounds Per 100 Ft. Working Pressure (PSI)
1/2 1-1/8 2 55 250
3/4 1-3/8 2 71 250
1 1-5/8 2 90 250
1-1/4 1-31/32 2 124 250
1-1/2 2-7/32 2 155 250
2 2-23/32 2 180 250 |
|
| » Posted by: Kachet High Pressure Hose Co., Ltd. [China] |
|
|
|
|
|
[Sell]
High Pressure Air Hose |
|
|
We not only offer high pressure hydraulic hose and also supply high pressure hoses that used for air. High pressure air hoses are widely used in underwater diving, for example scuba diving. It is an important and part of diving dress and other types of surface supplied diving equipment. In the other hand air hoses can be used for air brakes between tractors and semi-trailers. The air high pressure hoses can work in the operating pressure in excess of 300 bars that are 30Mpa and 4400 psi.
In the following we will introduce two types of air high pressure hoses: high pressure steel reinforced air hose and PVC air hose.
High Pressure Steel Reinforced Air Hose
Application:
Durable hose for compressed air which contains particles of lubricant.
It?s suitable for use in quarries, mines, tunnels, and construction of roads.
Indicators:
Braided steel wire can be used in extreme high pressure conditions
Sleeve, well distinguished color painting of the outer layer of rubber
Operating temperature:-35 ? C to +80 ? C
Safety factor: 5: 1
Inner layer: SBR, black, smooth. It?s suitable for air containing oil
Reinforcement: steel wire braid
Outer layer: SBR, yellow. It?s abrasion-resistant, weatherproof, and cloth impression.
Specifications
Inner diameter
(mm) Inner diameter
(inch) Wall thickness
(mm) Outer diameter
(mm) Operating pressure
(bar) Number of inserts Bending radius
(mm)
13.0 1/2 5.6 24.2 40 1 65
25.4 1 6.4 38.2 40 1 125
38.0 1-1/2 7.5 53.0 40 2 190
50.8 2 8.0 66.8 40 2 260
PVC Air Hose
PVC air hose is also called high pressure air hose tubing.
Construction and features:
The middle layer is made of high strength synthetic fiber.
Inner and outer layers are made of PVC compound material. They have high pressure resistance,good flexible and excellent durability, weather resistant, and chemical anticorrosion.
Application: general used on high-pressure industrial applications, compressed air in garages and service stations, factory air lines, pesticide spraying, automation machinery and pneumatic lines, etc.
Working temperature ranges from -10?C to +65?C.
Specifications
Size (inch) ID OD Weight W.P. Length
inch mm inch mm Lb./ft. Kg/m psi MPA m/roll
1/4 0.26 6.5 0.47 12 0.073 0.109 300 2.0 100
9/32 0.30 7.5 0.51 13 0.081 0.121 300 2.0 100
5/16 0.33 8.5 0.55 14 0.089 0.133 300 2.0 100
3/8 0.39 10 0.63 16 0.113 0.168 300 2.0 100
1/2 0.51 13 0.79 20 0.166 0.248 300 2.0 100
5/8 0.63 16 0.98 25 0.266 0.397 300 2.0 100
3/4 0.75 19 1.12 28.5 0.325 0.485 300 2.0 100
1 0.98 25 1.36 34.5 0.408 0.6.8 220 1.5 50
1-1/4 1.26 32 1.73 44 0.658 0.981 220 1.5 50
1-1/2 1.50 38 1.97 50 0.762 1.136 220 1.5 50
2 1.97 50 2.52 64 1.151 1.716 150 1.0 50 |
|
| » Posted by: Kachet High Pressure Hose Co., Ltd. [China] |
|
|
|
|
|
[Sell]
High Pressure Hydraulic Hose |
|
|
High pressure hydraulic hose is an important part of most hydraulic machines and other equipment, which is used to transmit working fluids. High pressure hoses and other channels carry the largest compressive load of all the other components of the hydraulic machines. Their durability determines the service life of machinery, regardless of its type. This feature calls for the right choice of hoses: they should be of the highest quality and most guaranteed lifetime.
High pressure hydraulic hose is special designed to move the working fluid in the hydraulic machines and mechanisms. Hose runs on the principle of flexible pipe for transporting fluids under high pressure.
Applications:
Hydraulic high pressure hoses are suitable for the transportation of hydraulic fluids based on mineral and oils, emulsions, water-glycol fluids and lubricants based on vegetable and mineral oils. But they are not suitable for transporting hydraulic fluids based on chlorinated hydrocarbons, and phosphate esters. Therefore they are used in various industries: construction and road equipment, lifting equipment, timber and agricultural machinery, industrial equipment, etc.
The company draws attention to its customers a wide range of hydraulic hoses for high pressure. Here you can select the high pressure hoses of all possible types, sizes and purposes. We present the hydraulic hoses fully certified to meet international standards of GOST, DIN, EN, ISO, and SAE.
High pressure hose 1SN DIN EN 853 and 2SN have the same tube, cover layer and operating temperature. 1SN DIN EN 853 has one layer high tensile steel wire braid reinforcement, and 2SN DIN EN 853 has two layers high tensile steel wire braid reinforcement. They are all wire braided high pressure hoses.
Tube: oil resistant synthetic rubber
Cover: Synthetic rubber, abrasion resistant
Operating temperature: -40 ? C to +100 ? C (+120 ? C max.)
High pressure hose 1SN specifications
Dash size Internal D Outside D W.P. B. Bending radius Weight
mm. inch mm. mm. bar bar mm. kg / m
6 1/4 " 6.4 4.13 225 900 100 0.226
8 5/16 " 8.0 15.0 215 850 115 0.265
10 3/8 " 9.5 4.17 180 720 130 0.335
12 1/2" 7.12 6.20 160 640 180 0.415
16 5/8 " 16.0 7.23 130 520 200 0.496
19 3/4" 19.0 7.27 105 420 240 0.638
25 1 " 4.25 35.6 88 350 300 0.980
31 1-1 / 4 " 8.31 43.5 63 250 420 1.207
38 1-1 ;/ 2 ;" 38.1 50.6 50 200 500 1.560
51 2 " 50.8 64 40 160 630 2.108
High pressure hose 2SN DIN EN 853 specifications
Dash Size Internal D Outside D W.P. B.P. Bending radius Weight
mm. inch mm. mm. bar bar mm. kg/m
6 1/4" 6.4 15.0 400 1600 100 0.376
8 5/16" 8.0 6.16 350 1400 115 0.412
10 3/8" 9.5 19.0 330 1320 130 0.519
12 1/2" 7.12 2.22 275 1100 180 0.630
16 5/8" 16.0 4.25 250 1000 200 0.780
19 3/4" 19.0 3.29 215 850 240 0.959
25 1" 4.25 38.1 165 650 300 1.409
31 1-1/4" 8.31 48.3 125 500 420 2.059
38 1-1/2" 38.1 54.6 90 360 500 2.385
51 2" 50.8 67.3 80 320 630 3.050
63 2-1/2" 63 81.0 70 280 760 4.190
76 3? 75.5 93.0 35 140 900 4.500
High pressure hose 4SP DIN EN 856 and 4SH have the same construction
Tube: oil resistant synthetic rubber
Reinforcement: four high tensile steel wire helix
Cover: Synthetic rubber, abrasion resistant
Operating temperature:-40 ? C to +100 ? C (+120 ? C max.)
High pressure hose 4SP specifications
Dash Size
Internal D Outside D W.P. B.P. Bending radius Weight
mm. inch mm. mm. bar bar mm. kg/ m
6 1/4" 6.4 8.17 450 1800 150 0.615
10 3/8" 9.5 4.21 445 1780 180 0.850
12 1/2" 7.12 6.24 415 1660 230 0.935
16 5/8" 16.0 5.28 350 1400 250 1.146
19 3/4" 19.0 32.1 350 1400 300 1.554
25 1" 4.25 39.7 280 1120 340 2.033
31 1-1/4" 8.31 50.8 210 840 460 3.176
38 1-1/2" 38.1 57.1 172 688 560 3,657
51 2" 50.8 70.6 172 688 660 5.137
High pressure hose 4SH DIN EN 856 specifications
Dash Size
Internal D Outside D W.P. B.P. Bending radius Weight
mm. inch mm. mm. bar bar mm. kg/m
19 3/4" 19.0 32.2 420 1680 280 1.566
25 1" 4.25 38.7 380 1520 340 2.087
31 1-1/4" 8.31 |
|
| » Posted by: Kachet High Pressure Hose Co., Ltd. [China] |
|
|
|
|
|
[Sell]
High Pressure Garden Hose |
|
|
Any plants in your garden plot are in need of constant and adequate watering. It doesn?t matter whether the plants are growing in your garden or this garden ornamental plants or flowers in the lawn. If they are not watered with water, they can quickly languish or even die at all. So there is another question - how best to provide the necessary watering, while not spending a lot of money and time. Our special high pressure garden hoses are the best choice for you to solve the problems.
High pressure garden hose specifications:
Color is often outside in semi-transparent green, dark green, yellow and other colors, and customized colors are welcomed.
It has a 3-layer construction. The outside and inside layers are made of PVC, and the middle reinforcement layer is high tensile and long-lasting synthetic fiber or polyurethane. Working Temperature: -5?C to 65?C
size metric measurement length W.P. B.P. Weight Packing Measurement
At 23?C
inch I.D.(mm) O.D.(mm) m/roll MPA MPA kg/roll D*H(mm)
3/8 10 14 15 1.0 3.0 1.5 255*80
1/2 11.5 15.5 20 1.0 3.0 2.3 340*80
1/2 12 16 100 1.2 3.6 11.5 500*190
1/2 12 17 30.5 1.5 4.5 4.7 360*120
5/8 15 19 50 1.0 3.0 7.2 440*155
5/8 15 20 50 1.2 3.6 9.3 405*185
5/8 16 22 30.5 1.2 3.6 7.4 450*140
3/4 19 24 50 0.8 2.5 11.4 530*170
Characteristics:
Any color, diameter and length are available.
Flexible, elastic, durable, light weight with excellent adaptability
Excellent weather resistance and high pressure tolerance
Application:
It can withstand daily use in the garden or cottage in summer, as the plants need daily watering. However in winter the temperature is very low and the hose should not be used but stored in the shed. It is necessary that the hose is not collapsed and lost their properties in the cold.
Garden hoses are widely used for irrigation and washing in parks, factories and families, gardening, and car spray washing. |
|
| » Posted by: Kachet High Pressure Hose Co., Ltd. [China] |
|
|
|
|
|
[Sell]
High Pressure Water Hose |
|
|
Specialized high-pressure hose is designed not only to fully meet all the required conditions of practicality and convenience in transportation of water, but also, at the same time it to be able to withstand the sometimes enormous pressures on it transported by water. Our high pressure water hoses are produced to give you best solutions for transferring water in high pressure environment.
High pressure water hose is also called water jetting hose. It can help to clean yards or outdoors without effort because of the high pressure function. Therefore it is widely used in many industries such as construction, and agriculture. And it also can be used in our daily life for firefighting because it is very necessary to use high pressure hose for transferring water to put out the fire. The working temperature ranges from -30?C ~ +85?C (-22?F ~ +185?F). So the high pressure water hose has great difference of high pressure garden hose.
Construction:
Our high pressure water hoses consist of three layers. The tube is made of smooth black SBR. It?s resistant to air, water and oil mist. The reinforcement layer is high tensile synthetic cord with wire helix. The cover is similar to the inner tube. That is to say the cover is corrugated black SBR or EPDM, and it has strong resistance to abrasion, weather and ozone.
Nominal specifications:
TYPE ID OD WP BP L
Code inch mm mm bar bar m
HPWH-50-62-20 2 51 62 20 51 60
HPWH-65-75-20 2-1/2 63 75 20 51 60
HPWH-80-89-20 3 76 89 20 51 60
HPWH-100-118-20 4 102 118 20 51 40
HPWH-125-144-20 5 127 144 20 51 40
HPWH-150-169-20 6 152 169 20 51 40
HPWH-200-228-20 8 203 228 20 51 12
HPWH-250-284-20 10 254 284 20 51 12
HPWH-300-339-20 12 305 339 20 51 12 |
|
| » Posted by: Kachet High Pressure Hose Co., Ltd. [China] |
|
|
|
|
|
[Sell]
High Pressure Hose |
|
|
High pressure hoses (HPH) are flexible pipes used for liquid, oil, emulsions and gas under high pressure conditions. Hoses are made of different materials and with different technologies depending on the operating environment, limiting pressure, climatic conditions and the working fluid for which they are transferring. See more on tips on installing fittings to high pressure hoses.
Applications:
High pressure hoses meet the highest European standards and are certified to the requirements of the ISO standard. They are used for industry and transport, the cars and trucks of all brands. Hoses are used for: power steering, fuel system, cooling system, heating system, oil coolers, and air brake systems.
Standard design of high pressure hoses:
All high pressure hoses are two main layers - the inner and the outer, mostly manufactured by extrusion of synthetic rubber. For the inner layer they use oil-resistant synthetic rubber. Also some manufacturers equip their hoses inner layer of Nitrile (NBR) to extend the lifetime of several high pressure hoses. For the outer layer of high pressure hoses they also use the abrasion resistant synthetic rubber.
To improve the thermal stability, high pressure hoses sometimes are covered with flexible or winded of high temperature-resistant polymers. The braided layer is made of steel wire, brass or mixed. High pressure hoses are packed in coils, which subsequently cut to length on-demand and pressure test the various fittings for hoses with insert sleeve on special hydraulic presses for crimping.
Classification and choosing:
High pressure hoses are the most important part of modern equipment. They are used in use all hydraulic systems, gas and water supply. According to the material, they are classified into rubber hose, PVC hose, and nylon hoses. In term of the knitted forms they are divided into spiral wire high pressure hose and wire braid high pressure hose. According to the applications there are high pressure air hose, steam hose, garden hose, hydraulic hose, and water hoses.
Of course it is important to choose the optimum hose for your systems. You need to carefully approach the study of features and characteristics of the environment.
Double wire-braid high pressure hose with black cover and brass fittings |
|
| » Posted by: Kachet High Pressure Hose Co., Ltd. [China] |
|
|
|
|
|
[Sell]
ultra thin rubber sheet |
|
|
ultra thin rubber sheet From EAGET GROUP CO.,LTD
--Thickness :0.07mm、0.1mm、0.2mm、0.3 mm、0.4 mm、0.5 mm、0.6 mm、0.7 mm、0.8 mm、0.9 mm、1.0 mm
--Width:100mm、200mm、300 mm、400 mm、500 mm、600 mm、700 mm、800 mm、900 mm、1000 mm???2800 mm
--physical properties for silicon sheet
withstand voltage :4.0KV-10KV
Working temperature:-60-220 ℃
Density:1.3
Hardness:40-90ShoreA
Elongation at break:300%
Tear strength:22Kn/m
Our EAGET Group rubber sheets types :
--hypalon fabric,neoprene polyester,silicone fabric,viton polyester
--thin silicone rubber sheeting
--Solar or Glass laminating silicone sheeting/2.6m,3.2m,3.8m width rubber sheet
--Laminated glass furnace vacuum silicone bag
--Garment industry latex sheeting
--Pure Gum rubber sheet
--Electric insulation/Antistatic rubber sheet(ESD)
--Skirting rubber sheet
--Insulation rubber sheet
--Oil-proof Rubber Sheet
--Fabric Texture Rubber Sheet/Cloth Insertion/ Metal insertion rubber sheet
--Sponge/foam rubber sheet with back adhesitive
--Silica plate adhere to Aluminum for hot stamp,printing industry
Need more details of "",just ask EAGET GROUP ! |
|
| » Posted by: EAGET GROUP CO.,LTD [China] |
|
|
|
|
|
[Sell]
Rubber Bellow Custom |
|
|
Rubber bellow custom/rubber corrugated sleeve from EAGET
--highly flexible, able to withstand the heat
--the appropriate thickness, unparalleled quality, excellent performance
--provide a variety of sizes and lengths
--Suitable for: Aerospace, petrochemical industry, sports coupling, chemical, automotive industry
Our Eaget Rubber is very good at suppling various rubber sheets/mats, extrusions, moldings, PU, Teflon, and PVC products.
Herein below is the advantage in our rubber molding parts:
Develop more than 1, 000 standard rubber molding parts, which are usually ex stock or within Very short lead times.
Specialty rubber molding processes
Rubber to metal bonding
Combination of multi hardness compounds
Insert molding - fabric, metal, plastic etc
Autoclave processing of shaped hose.
Tape adhesive process
Punch rubber flange gasket, washers etc
Need more details of "custom rubber bellows", pls feel free to contact EAGET GROUP, and will be replied within 24 hours |
|
| » Posted by: EAGET GROUP CO.,LTD [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 next»
|
|
|
