|
|
|
|
|
|
|
[Sell]
Four Roller Rubber Calender |
 |
|
| Fourroller rubber calender is mainly used to Roll-extrusion for rubber sheet, conveyor belt. Sticking & friction rubber of fabrics. The rolls are made of chilled alloy cast iron with bored cavities and can be heated by steam or cooled by water homogenously to meet different requirements. The machine is consisted of bedplate, frame, rolls , motor , coupling ,speed ratio gear , adjusting spacing device , the adjusting temperature device of roll . The bedplate is whole model, Installation convenience. Roll are made of chilled case alloy iron, the working surface of roll is hardness and smoothly. steam and cooling water can pass through inner of the rolls so that surface temperature can be adjusted . Roll fluctuation arrange , under roll is initiative roll , motor pass through coupling ,To make under roll driving , above roll by under roll pass though speed radio driving . Roll bearing adopt roll bearing, high precision, long service life , Axes pathway is no abrasion . Adjusting spacing device is consisted of one left and one right hand wheel. The bearing bases need is moved and reached nip by worm and worm wheel. Model XY-F 630 XY-4 1120A XY-4 1400 XY-4 1730 XY-4 2130 XY-4I 630 XY-4L 630 Roll diameter (mm) 230 360 400 610 710 Roll working length (mm) 630 1120 1400 1730 2130 Roll speed ratio 1:1:1:1 0.73:1:1:0.73 1:1.383:1.383:1 1:1.4:1.4:1 1:1:1:1 Middle-roll linear speed(m/min) 2.1-21 6.7-20.1 8.8-26.39 8-50 8-50 Adjusting nip product thickness(mm) 0-10 10 10 20 0-20 Min. Calendering product thickness(mm) 0.2 0.2 0.2 0.15 0.15 Calendering product width(mm) 100-500 500-920 1200 1500 1900 Motor power(KW) 15 55/18.3 75/25 160 185 Overall dimensions(mm) 3300940 2350 60001620 2490 65001970 2740 70104105 3730 76504560 4080 Weight(kg) ~4800 ~14650 ~18650 ~62000 ~67000 |
|
» Posted by: Qingdao Everfine Machinery Co., Ltd [China]  |
|
|
|
|
|
[Sell]
Platen Vulcanizing Press |
|
|
| Platen vulcanizing press is used for all kinds of vulcanizing mould, rubber and plastic mould products, and non-mould products. Being a column structure and downward pressing type, the heating plate opens by the self-weight of the heating plate, platform and plunger. The rising of the plunger makes the heating plate close while the hydraulic oil provides the pressure. Type XLB-DQ400X400X2 XLB-DQ400X400X2 XLB-DQ600X600X2 XLB-DQ750X850X2(4) Total Pressure(mn) 0.25 0.50 1.00 1.60 Plate Size(mm) 400X400 400X400 600X600 750X850 Daylight(mm) 125 125 125 125 Daylight No 2 2 2 2(4) Piston Stroke(mm) 250 250 250 250(500) Unit Area Pressure(kg/cm2) 20 31 28 25 Main Motor Power(Kw) 3 2.2 2.2 3 Overall Dimension(mm) 1300X800X1500 2400X550X1500 1401X680X1750 1900X950X2028 Weight(Kg) 1150 1300 3500 6500(7500) |
|
| » Posted by: Qingdao Everfine Machinery Co., Ltd [China] |
|
|
|
|
|
[Sell]
Three Roller Rubber Calender |
|
|
| Three roller rubber calender is mainly used to Roll-extrusion for rubber sheet, conveyor belt. Sticking & friction rubber of fabrics. The rolls are made of chilled alloy cast iron with bored cavities and can be heated by steam or cooled by water homogenously to meet different requirements. The machine is consisted of bedplate, frame, rolls , motor , coupling ,speed ratio gear , adjusting spacing device , the adjusting temperature device of roll . The bedplate is whole model, Installation convenience. Roll are made of chilled case alloy iron, the working surface of roll is hardness and smoothly. steam and cooling water can pass through inner of the rolls so that surface temperature can be adjusted . Roll fluctuation arrange , under roll is initiative roll , motor pass through coupling ,To make under roll driving , above roll by under roll pass though speed radio driving . Roll bearing adopt roll bearing, high precision, long service life , Axes pathway is no abrasion . Adjusting spacing device is consisted of one left and one right hand wheel. The bearing bases need is moved and reached nip by worm and worm wheel. Model XY-3I 630 XY-3I 1120A XY-3I 1400 XY-3I 1200 XY-3I 1730 XY-3I 2130 XY-3 1120A XY-3I 1500 XY-3l1120A Roll diameter (mm) 230 360 400 450 610 710 Roll working length (mm) 630 1120 1400 1200(1500) 1730 2130 Roll speed ratio 1:1:1 1:1:1 1:1:1 1:1:1 1:1:1 1:1:1 1:1.42:1 0.733:1:1 1:1.383:1.383 1:1.5:1 1:1.4:1 1:1.48:1 0.733:1:0.733 1:1.383:1 Middle-roll linear speed (m/min) 7.97 7.0-21.06 8.8-26.39 8.36-25.08 5.4-54 8-50 Adjusting nip range (mm) 0-7 0-10 0-10 0-6 0-20 0-20 Min.Calendering product thickness (mm) 0.2 0.2 0.2 0.15 0.15 0.15 Calendering product width (mm) 100-500 500-920 1200 1100(1400) 1500 1900 Motor power (kw) 7.5 40/13.3 55/18.3 75/25 132 185 Overall dimensions (mm) 25707401500 555016402120 650015002440 7120(7420)22002900 701039503730 765045604080 Weight (kg) ~4200 ~12750 ~26000 ~27000 ~52000 ~67000 |
|
| » Posted by: Qingdao Everfine Machinery Co., Ltd [China] |
|
|
|
|
|
[Sell]
Rubber Mixing Mill with Stock Blender |
|
|
| Rubber mixing mill with stock blender is chiefly used for the mastication, mixing, warming up and sheeting of rubber, especially as accessory of internal mixers to make rubber sheets. The rollers are made of chilled cast iron with vanadium and titanium alloys. The roller face is hard and anti-wear. The internal cavity is processed to make temperature well proportioned on the roll surface. The machine is equipped with an overload protection device to prevent the major components from being damaged due to overloading. The machine is also equipped with an emergency device. When an emergency accident happens, just draw the pull rod, and the machine will stop immediately. It is safe and reliable. The transmission system adopts a hard facing gear reducer, which has a compacted structure with higher transmission effciency, lower noise and longer service life. The base frame is a complete framework, which is convenient for installation. NOTE: all the models may be optionally equipped with either copper bushes or rolling bearings. Model XKY-550 XKY-660 XKY-710 Item Roll diameter mm 550 660 710 Roll working length mm 1500 2130 2200 Linear speed of front roll m/min 31.17 32 30.26 Speed ratio of rolls 01:01.1 01:01.1 01:01.1 Compound feeding capacity kg 140 165 190 Motor power kW 110 240 280 Dimensions L mm 6210 7650 9120 W mm 2630 3460 3850 H mm 2900 2720 2930 Gross weight t ~28 ~53 ~59 |
|
| » Posted by: Qingdao Everfine Machinery Co., Ltd [China] |
|
|
|
|
|
[Sell]
Hard Tooth type Rubber Mixing Mill |
|
|
| Hard tooth type rubber mixing mill is used for the rubber compounding and sheeting 1. The rolls are made of chilled cast iron. The roll surface is hard and wearable. The internal cavity is processed to make temperature well proportioned on the roll surface. 2. The machine is equipped with an overload protection device to prevent the major components from being damaged due to overloading. 3. The machine is also equipped with and emergency device. When an emergent accident happens, just draw the pull rod, and the machine will stop immediately. It is safe and reliable. 4. The transmission system adopts a hard facing gear reducer, which has a compacted structure with higher transmission efficiency, lower noise and longer service life. 5. The base frame is a whole framework, which is convenient for installation. The main technical parameter Model X(S)K-400 X(S)K-450 Rolls diameter(mm) 400 450 Working length of rolls(mm) 1000 1200 Linear speed of front roll(m/min) 20 23.2 Speed ratio of front & rear roll 01:01.3 01:01.3 Max. roll gap(mm) 15 15 Feeding capacity per batch(kg) 20-35 25-50 Driving motor power(kw) 45 55 Overall dimension(mm) L 2850 3300 W 1850 1800 H 2000 2000 Weight(ton) 7.2 11 |
|
| » Posted by: Qingdao Everfine Machinery Co., Ltd [China] |
|
|
|
|
|
[Sell]
Cold Feed Rubber Extruder |
|
|
| cold feed rubber extruder 1. cold feed rubber extruder is used to tread crowded system, inner tube, cushion belt, rubber hose ect. Semi-finished products, also can be used for cable with glue. 2. Don't need cooking machine, can reduce investment and production cost 3. A constant temperature and feed rate of the materials, the finished product has a high uniformity and temperature. 4. The laid for extruder has nothing to do with glue material workshop, more suitable for no mixed refine workshop company 5. Extensive use replace head or screw can squeeze system different kinds of rubber products Product Name Cold feed rubber extruder Type XJW-90 XJW-120 XJW-150 Screw dia. (mm) 90 120 150 Max. Screw speed(r/min) 45 40 35 Feeding Roll Dia. (Mm) 72 120 120 Motor Model & Power MotorZ4, the power will be decided according to the extrusion head equipped. Zone of Hot Water Circulating 3-4 3-4 3-4 Max. Total Power of Hot Water Circulating Heating(KW) 48 48 48 Capacity(Kg/h) It will be decided according to the extrusion head equipped Overall Dimensions(mm)(without die head and hopper) 3045 2052 1453 4250 2290 1490 4277 2211 1503 Weight(Kg) 5000 5500 8000 |
|
| » Posted by: Qingdao Everfine Machinery Co., Ltd [China] |
|
|
|
|
|
[Sell]
Hydrocarbon Resin C5 for Rubber and Tyre |
|
|
The Credrez series of HCR-C5100 and HCR-C5101 Series of Petroleum Resins are pure C5 Hydrocarbon Resins without aormatic content applied exclusively in tire and rubber compounding. They have an excellent compatibility with a wide variety of elastomers including natural rubber (NR), synthetic rubber, polyethylene, polypropylene, Styrene-Isoprene-Styrene (SIS), Styrene-ethylene-butadiene-styrene(SEBS) and Ethylene Vinyl Acetate (EVA), and also have a good compatibility with the natural tackifying resins (such as Terpene, Rosin and thereof derivatives). Additionally, the product can be used in rubber compounding as tackifying agent, reinforcement agent, softening agent as well as the filling agent, etc.
Performance
Light Color
Excellent Tackifying Property
Good softening and reinforcement properties in rubber mixing process, can enhance the ductility and peel resistance of rubber compounding.
Improve the tackiness of raw rubber without effecting the curing time and cured property of rubber compounding.
limited influence on vulcanization time and physical properties after vulcanization
Avoids the sticky problem to rubber processing machines
Contributes to a uniform dispersion of filling material in rubber compounding |
|
| » Posted by: Puyang Tiancheng Chemical Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
Rubber Strainer |
|
|
| Rubber strainer is used for straining impurities out of rubber compound. Structure 1. The rubber strainer can be used in different applications, including single head, double head, hot feed, cold feed, etc. 2. The head is fitted with a mechanical cutter, which operates hydraulically. The operation is simple and easy. 3. The machine body is equipped with a temperature regulation device. The screw an bushes are subjected to nitrogenation treatment to get enough strength and excellent wear-resistance. 4. Cole feed rubber strainers of various specifications are supplied for users to select. Model Srew Motor power Produce capacity Diameter L/D Highest rotational speed of screw shaft Unit mm L/D r/min Kw Kg/h XJL-120 120 4.8:1 45 22 180 XJWL-120 120 12:01 45 75 260 XJDL120 120 12:01 45 75 480 XJL-150 150 4.8:1 45 37 400 XJWL150 150 12:01 45 132 520 XJDL150 150 12:01 45 132 1050 XJL-200 200 4.5:1 40 75 800 XJL-250 250 4.5:1 40 90 1600 |
|
| » Posted by: Qingdao Everfine Machinery Co., Ltd [China] |
|
|
|
|
|
[Sell]
Rubber Sheeting Mill |
|
|
| Rubber sheeting mill is chiefly used as accessory of internal mixers to make rubber sheets. The rollers are made of chilled cast iron with vanadium and titanium alloys. The roller face is hard and anti-wear. The internal cavity is processed to make temperature well proportioned on the roll surface. The machine is equipped with an overload protection device to prevent the major components from being damaged due to overloading. The machine is also equipped with an emergency device. When an emergency accident happens, just draw the pull rod, and the machine will stop immediately. It is safe and reliable. The transmission system adopts a hard facing gear reducer, which has a compacted structure with higher transmission effciency, lower noise and longer service life. The base frame is a complete framework, which is convenient for installation. NOTE: all the models may be optionally equipped with either copper bushes or rolling bearings. Model XKY-550 XKY-660 XKY-710 Item Roll diameter mm 550 660 710 Roll working length mm 1500 2130 2200 Linear speed of front roll m/min 31.17 32 30.26 Speed ratio of rolls 01:01.1 01:01.1 01:01.1 Compound feeding capacity kg 140 165 190 Motor power kW 110 240 280 Dimensions L mm 6210 7650 9120 W mm 2630 3460 3850 H mm 2900 2720 2930 Gross weight t ~28 ~53 ~59 |
|
| » Posted by: Qingdao Everfine Machinery Co., Ltd [China] |
|
|
|
|
|
[Sell]
Rubber Refiner |
|
|
| Rubber refiner is mainly used for refining of reclaimed rubber and rubber sheeting. The rolls are made of chilled alloy cast iron with Wear-resistant hard surfaces. The two rolls are smooth ones with bored cavities and can be cooled homogeneously. The protective device is provided to protect the main parts from damage due to overload. In case of emergency, the safety rod is pulled down and the rolls will be stopped immediately. Type XKJ-450 XKJ-480 Roller Diameter (mm) 450/510 480/610 Working length of rollers (mm) 800 800 Linear speed of front roller (m/min) 37.5 26.4 Friction ratio of front and rear roll 01:01.7 01:01.8 Max gap (mm) 10 15 Capacity per batch (Kg) 200 300 Overall dimension (mm) 406022001470 503025801780 Weight (Kg) about 10000 about 20000 |
|
| » Posted by: Qingdao Everfine Machinery Co., Ltd [China] |
|
|
|
|
|
[Sell]
Hot Feed Rubber Extruder |
|
|
| Rubber Extruder: type and spec. Item. XJ-65 XJ-85 XJ-115 XJ-150 XJ-200 XJ-250 Screw dia.(mm) 65 85 115 150 200 250 L/D 4 4.8 4.8 4.4 4.4 4.5 Screw rolational speed(r/min) 20.27 35.47 27.40 53.72 20~60 27~81 22.4~67.2 19.7~59.1 Motor power(kw) 7.5 17 30 15.3~55 33.3~100 33.3~100 Overall dimensions LWH(mm) 16006751053 20507351275 27706651300 35858141470 454911401750 495011501483 Capacity (kg/h) 50~80 62~270 100~350 800 1500~2200 3500 Total weight(t) 1.5 2.6 3.3 4.5 7.21 9 |
|
| » Posted by: Qingdao Everfine Machinery Co., Ltd [China] |
|
|
|
|
|
[Sell]
Dispersion Kneader |
|
|
| Dispersion Kneader can be applied in the separate or mixing refining of raw glue, mix glue, rubber, plastic and other raw materials to manufacture various rubber products such as EVA frothing soles, rubber soles, TPR soles, rubber roller wheels, sponge, tyres, balls, rubber belts, capsules, grease seals, shockproof rubber, adhesive tapes, electric products and rubber products for vehicle. aaa Item Model X(S)N-10X32 X(S)N-20X34 X(S)N-35X30 X(S)N-55X30 X(S)N-75X30 X(S)N-110X30 Total volume of mixing chamber L 25 45 75 125 180 250 Working volume of mixing chamber L 10 20 35 55 75 110 Driving motor power KW 15 22 55 75 110 185 Tilting motor power KW 1.1 1.5 2.2 2.2 4 4 Tilting angle 140 140 140 140 140 140 Rotational speed of the rotor(front/rear) r/min 32/23.5 34/28 30/24.5 30/24.5 30/24.5 30/24.5 Pressure of compressed air MPa 0.5~0.8 0.5~0.8 0.5~0.8 0.6~0.8 0.6~0.8 0.6~0.8 Capacity of compressed air m3/min 0.5 0.7 0.9 1.0 1.0 1.5 Pressure of cooling water(rubber mixing) MPa 0.2~0.4 0.2~0.4 0.3~0.4 0.3~0.4 0.3~0.4 0.3~0.4 Pressure of heating steam(plastics mixing) MPa 0.5~0.8 0.5~0.8 0.5~0.8 0.5~0.8 0.5~0.8 0.5~0.8 L mm 2580 2630 3200 3280 3330 3930 Overall dimensions W mm 1300 1520 1900 1930 2620 3000 H mm 2280 2550 2950 3070 3340 3660 Weight Kg 3300 4500 6500 7500 10500 14500 |
|
| » Posted by: Qingdao Everfine Machinery Co., Ltd [China] |
|
|
|
|
|
[Sell]
Batch-off Machine |
|
|
| Batch off machine is the downstream auxiliary to the mixer or the dispersion mixer. It works with the double conical-screw extruder sheeter and is designed to perform continuous operations of rubber slab conveying, separant applying, air cooling, drying, cutting and wig-wag stacking. Model XPG-600 XPG-800 Max.Rubber sheet width (mm) 600 800 The thickness of the rubber sheet (mm) 4-10 4-10 Temperature over room temperature 10 15 Linear speed of taking-in conveyer (m/min) 24.075 35 Linear speed of sheet hanging chain (m/min) 0.822 0.117-1.17 Hanging height of the sheet hanging bar (mm) 1000-1500 1000-1500 Number of cooing fans Sets 12 20 Total power (kw) 13.7 28.8 Overall dimensions(L*W*H) mm 14253*4500*3405 16800*4700*3520 About weight (t) 11 16.8 |
|
| » Posted by: Qingdao Everfine Machinery Co., Ltd [China] |
|
|
|
|
|
[Sell]
Titanium Dioxide Anatise |
|
|
【Specification】
1.Titanium Dioxide Anatase CSBA01-01
TiO2 %(m/m) ≥ 98.00 Chromatic Aberration Value L ≥98.5
( L* a* b* value ) A 0.15+/0.3 B 0.5+/-0.3
Coloring power(compared with standard sample)100 Matter volatile at 105C. Deg., %(m/m) ≤ 0.5 PH of aqueius suspension 6.5-8.0 Oil absorption, g/100g ≤ 22 45um sieve residue, %(m/m) ≤ 0.06 Resistiviiy of Aqueous Extract, om ≥ 20 Water dispersancy, % ≥ 65 2. Titanium Dioxide Anatase CSA-100
TiO2 content(m/m) ≥98 Color (as compared with reference standard) Not lower than
Whiteness (compared with standard sample) approximately
Tint reducing power (as compared with reference standard) ≥105
Volatile at 105`C %(m/m) ≤0.4 Volatile at 105`C after 24h stay at(23+/-2)`C/RH (50+/-5)%, %(m/m) ≤0.5
Water soluble substances, %(m/m) ≤0.5 PH value of aqueous suspension 6.5-8.0 Oil absorption, g/100g ≤24 Residue on sieve 45Um, %(m/m) ≤0.06 Resistance of aqueous extract, Ωm ≥20 【Application】
Widely used in painting, coating, printing oil, paper making, plastic, rubber, artificial fiber, welding electric, enamel, electric appliances and construction material etc...
|
|
| » Posted by: Chemsol Industry Co., Ltd [China] |
|
|
|
|
|
[Sell]
Conveyor Belt Vulcanzing Line |
|
|
| Conveyor Belt Producing line is of high automation level and compact advanced structure, suitable to vulcanize giant conveyer belt such as nylon conveyer belt, common conveyer belt, anti-fire conveyer belt, wire rope conveyer belt and rubber plate etc. We can design and produce conveyor belt vulcanizing press completely according to customer's request. |
|
| » Posted by: Qingdao Everfine Machinery Co., Ltd [China] |
|
|
|
|
|
[Sell]
banbury mixer |
|
|
| Banbury mixer is the best machine for mixing of big quantity plastic and rubber material. 1. The diversity of rotor type can meet different mixing requirements.User can choose any kind of rotors(the mixer with different rotor has different total volume and working volume. 2. Drive sysyem adopts DC motor or AC inverter motor to realize stepless speed adjustment or adopts Acmotor with gear box etc.The drive system has the advantages of steady drive,lower noise and long service life etc. 3. The standard rotr adopts the right drive system.According to users needs we also can supply the left drive system. 4.Drive sysyem adopts DC motor or AC inverter motor to realize stepless speed adjustment or adopts Acmotor with gear box etc.The drive system has the advantages of steady drive,lower noise and long service life etc. 5.On-site operation cabinets and electrical control cabinets adopt PLC communication,results in reduction of equipment troubles and installation cost. Model X(S)M-50*40 X(S)M-80*40 X(S)M-110*40 X(S)M-250/20A Total volume of mixing chamber L 50 80 110 253 Working capacity of mixing chamber L 30 60 82.5 140 Rotating speed of rear rotor r/min 40 40 40 23.2 Speed ratio of rotor 1:1.172 1:1.15 1:1.15 1:1.16 Pressure of compressed air MPa 0.6-0.8 0.6-0.8 0.6-0.8 0.6-0.8 Compressed air consume m3/h 20 30 60 40 Pressure of cooling MPa 0.3-0.4 0.3-0.4 0.3-0.4 0.2-0.4 Steam pressure MPa 0.8 0.5-0.8 0.5-0.8 0.5-0.8 Steam consume m3/h 200 300 720 720 Power of driven moter KW 95 210 240 240 Overall dimension(L*W*H) mm 5560*2700*3250 7000*2760*4500 6620*2640*4392 7100*3905*4953 About weight t 14 24 24 35 |
|
| » Posted by: Qingdao Everfine Machinery Co., Ltd [China] |
|
|
|
|
|
[Sell]
pad printing silicone rubber |
|
|
Pad printing silicone is specially designed for silicon pads which requires to be exquisite, without impurity or granules, and has advantages such as wearability, high-temperature resistance, and good in printing effect due to adding American Dupont Teflon high-temperature resistance new material. Applications: It is mainly used for printing irregular patterns of plastic toys,electronic toys,trademarks,electroplating products. Silicone pad is a carrier which transfer printing the patterns Tel:086-0755-89948019
Email:taozhulee24@hotmail.com;
Tel:086-0-13715184359
Lorna
|
|
| » Posted by: Hongye Jie Techonology Co.Ltd Shenzhen [China] |
|
|
|
|
|
[Sell]
Manual Mold Design Silicone Rubber |
|
|
The product is mainly applied in manual mold design,PVC plastic mould,melting-point alloy mould,alloy toy crafts,big statue,plastic toy, pad printing orientation, gift and stationery, cement product mould,electronic appliances vibration resistance, craftwork, shoe sole mould production, etc.Requirements for the silicone rubber:low shrinkage,no deformation of the mould, good elasticity,the more moulds duplicated the better,etc086-0755-89948019
Email:taozhulee24@hotmail.com;
Tel:086-0-13715184359
Lorna
|
|
| » Posted by: Hongye Jie Techonology Co.Ltd Shenzhen [China] |
|
|
|
|
|
[Sell]
molding silicone rubber |
|
|
molding silicone rubber are generally named two-component room temperature vulcanization silicone rubber,a kind elastic silicone rubber mold which features with resistance to deformation,acid-alkali,high-temperature and expansion.It mainly applicable to product exploitation,lighting ornaments, model design,architectural decoration,make the silicone mould for cultural relic duplication,candles, statues,resin crafts,etc.
Email:taozhulee24@hotmail.com
Tel:086-0-13715184359
Tel:086-0755-89948019
Lorna
|
|
| » Posted by: Hongye Jie Techonology Co.Ltd Shenzhen [China] |
|
|
|
|
|
[Sell]
Exhaust Cold Feed Rubber Extruder |
|
|
| Exhaust Cold Feed Rubber Extruder is applicable to produce vulcanized rubber in continuous mode at normal atmosphere or less pressure, such as rubber covering of electric wire and cable, and inner of hose, and different from material sealing joint strip, and so on. Advantage: The special design and material of screw shaft are used for a well smelting and mixing. On that base, by the vacuum system of the machine to excrete gas, water and the other volatile matter in rubber. The compact ability and quality of product is improved. The material of all screw shafts and liners is 38CrMoAlA high quality steel, the surface of them is processed by nitrogen treatment and the very hardness HRC is 60~65. Their resistance to wear and corrosion is very good. Type Screw shaft diameter Length/Diameter ratio(L/D) Highest rotational Speed of screw shaft(r/min) Motor power (kW) Highest produce Capacity(kg/h) XJWP-45 45 12-14 61 11 30 XJWP-60 60 14-16 61.5 22 65 XJWP-65 65 14-16 61.5 22 80 XJWP-75 75 14-16 61.5 30 110 XJWP-90 90 14-16 61.5 45 200 XJWP-120 120 16-18 55 90 420 XJWP-150 150 18-20 46 160 680 XJWP-200 200 20-22 36 250 1200 |
|
| » Posted by: Qingdao Everfine Machinery Co., Ltd [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 next»
|
|
|
