|
|
|
|
|
|
|
[Sell]
Medical Grade liquid silicone rubber for shoe insoles |
 |
|
Application of Medical Grade liquid silicone rubber for shoe insoles
The product is a two component high elongation silicone gel designed for silicone food care products, such as silicone insole.
This product cured at room temperature to a soft track gel with the addition of curing agent. The soft nature and cushioning effect offer this product provides excellent protection for our food health care.
Technique Data of HY-Q625# Medical Grade liquid silicone rubber for shoe insoles
Model HY-Q625
Appearance Transparent
Mixing Ratio 1:1
Operating time (Mins 25°C) 30-40
Curing time (Mins 25°C) 2-4h
Hardness (A°) 25±2
Density ( g/cm 3 ) 1.08
Viscosity (CS) 6000 ± 2000
Tensile-strength( kgf/cm2 ) 3.3
Tear-strength (kgf /cm ) 8±2
Elongation-break(%) 420
Retractility(%) ≤0.1
Features of Medical Grade liquid silicone rubber for shoe insoles
1.convenient 1:1 mixed ratio by weight
2. high elongation gel
3. low viscosity easily pourable
4.room temperature vulcanized and heat acceleration
5. soft track and selcky gel
6. absorbs shock and protets delicate mechanical component
7. no creativ by –product, no concerns nogarding corrosion
Q: What are Foot Relief Insoles designed to do?
A: Foot Relief Insoles are fluid filled insoles that have five primary benefits and a long list of secondary benefits. The insoles are designed to cushion, massage, absorb shock, give arch support, and increase circulation. The liquid insole will form to almost any shape foot giving you a customized fit after only a few minutes of wear. Many customers refer to our liquid filled insoles as "liquid orthotics" because of the way the insoles stretch slightly allowing the liquid to fill in the unique arches of your foot providing maximum comfort.
Any questions abt Medical Grade liquid silicone rubber for shoe insoles , pls feel free to contact Ms Sabrina
Tel: +86-755-89948006
Fax:+86-755-89948030
Mob: +86-18938867533
Email:hyse@szrl.net
Skype: pengpeng2580 |
|
» Posted by: Hongye Silicon Rubber Co.,Ltd [China]  |
|
|
|
|
|
[Sell]
platinum cure molding rubber silicone rtv |
|
|
Strenghts for platinum cure molding rubber silicone rtv
Platinum cure molding rubber silicone rtv is used for prototyping and the reproduction of parts. Silicone moulds can be constructed in many different forms depending on the shape of the part you are making. In this section we will outline how to create the easiest one part flat back mould.
Why platinum cure molding rubber silicone rtv
Silicone is the first choice of material when casting 3 dimentional shapes that contain undercuts as it exhibits excellent release properties, a high level of surface detail, very good chemical and high temperature resistance.
It comes in a two-component system (base + catalyst) available in a hardness range of very soft to medium. It is available for making moulds that are poured, brushed or sprayed
Features of platinum cure molding rubber silicone rtv
1. Good characteristics of easy-operation
2. Light viscosity and good flowability
3. Low shrinkage
4. Favorable tension
5. No deformation
6. Favorable hardness
7. High temperature resistance, acid and alkali-resistance and ageing resistance
8. Food grade, non-toxic
Datasheet of platinum cure molding rubber silicone rtv
Model Color Mixing ratio Pot life (mins) Demouled time (hrs) Hardness(A0) Tensile-strength (kgf/cm2) Tear-strength (kgf/cm) Viscosity (cps) Elongation (%)
HY-E625 translucent 1 : 1 30-60 4±1 25±2 35±2 25±2 6000±3000 ≥400
HY-E630 translucent 1 : 1 30-60 4±1 30±2 40±2 23±2 7000±3000 ≥395
HY-E635 translucent 1 : 1 30-60 4±1 35±2 47±2 22±2 8000±3000 ≥470
Any questions for platinum cure molding rubber silicone rtv, pls feel free to contact Ms Sabrina
Tel: +86-755-89948006
Fax:+86-755-89948030
Mob: +86-18938867533
Skype: pengpeng2580 |
|
| » Posted by: Hongye Silicon Rubber Co.,Ltd [China] |
|
|
|
|
|
[Sell]
Liquid Molding silicone rubber/(RTV) silicone rubber |
|
|
Liquid Molding silicone rubber/(RTV) silicone rubber application
liquid molding silicone rubber is suitable for industries such as toys, gifts, furniture decoration, construction decoration, stationery, resin crafts, unsaturated resin crafts, poly resin crafts, candle crafts, plastic crafts, plastercrafts, artificial plant and animal crafts, Buddhist statue crafts.
Liquid molding silicone rubber/ (RTV) silicone rubber features
a) Good characteristics of easy-operation
b) Good flowability and light viscosity
c) Low shrinkage
d) No deformation
e) Favorable tension
f) Favorable hardness
g) High temperature resistance, acid and alkali-resistance and aging resistance
Liquid molding silicone rubber/ (RTV) silicone rubber description
Tin-based silicones, also called condensation-cure silicones, are two-component materials which cure at room temperature(RTV)to flexible, high tear-strength rubbers. Tin cured silicones can be poured onto models or they can be made brushable by adding a thixotropic additive. They are ideal for molds where easy release or high temperature resistance is required. Tin cured silicones can be used for casting polyurethane, epoxy and polyester resins, waxes, all gypsum products and low-temperature metals. Our tin-cured silicone systems are the most economical. They are best used for casting resins and low melt metals.
Liquid molding silicone rubber/ (RTV) silicone rubber instruction
During operate the three important thing to pay attention
1. weigh theliquid silicone rubber and curing agent exatly
2. Stir theliquid silcone rubber and curing agent evenly
3.we shouldchoose the right hardness to making diffirent size of product mold
Liquid molding silicone rubber/ (RTV) silicone rubber Datasheet
Model HY-635
Appearance white
Mixing proportion of curing agent (%) 3%
Operating time (mins 25 0C ) 30-45
Curing time(hours 25 0C) 6-8
Hardness (A°) 35±2
Density ( g/cm3) 1.08
Viscosity (mPas -25 0C) 28000±3000
Tensile-strength(kgf /cm2) ≥49
Tear-strength (kgf /cm) ≥27
Elongation-break(%) ≥ 530
Any questions of mold making silicon rubber, please feel free to contact Ms Sabrina
Tel: +86-755-89948006
Fax:+86-755-89948030
Mob: +86-18938867533
Skype: pengpeng2580 |
|
| » Posted by: Hongye Silicon Rubber Co.,Ltd [China] |
|
|
|
|
|
[Sell]
mold making silicone rubber |
|
|
mold making silicone rubber application
mold making silicone rubber is primarily intended for mold making of gypsum, concrete, poly resin ,PU resin, unsaturated resin crafts, lighting and candles crafts , plastic toys , stationery gifts crafts industry, large statue, Buddha, relievo furniture, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils Factory, European buildings, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.
mold making silicone rubber desription
mold making silicone rubber is a kind of flowable liquid silicone, the quality has nothing to do with the color. It consists of two components. Part A is a flowable liquid silicone rubber, part B is the curing agent. Firstly, after your previous work of dealing with the original model, take some liquid silicone rubber , add 2%-3% curing agent of the amount of silicon, and mix them evenly. Then after vacuum-pumping the mixture, you can pour it into the mold frame. The silicone mold will cured in 2-4 hours.
mold making Silicon rubber datasheet
Model: HY-625 mold making silicon rubber
Appearance: white
Viscosity (cs): 17000-20000
Hardness (A): 24-26
Tensile strength(kgf/cm2 ) ≥32
Tear strength (kgf /cm):≥28
Elongation break(%):≥500
Retractility (%):≤0.2
Curing agent mixed rate (%):2-3
Operate time (min): 30
Curing time (hours): 2-4
Model: 630# mold making silicon rubber
Appearance: white
Viscosity (cs): 19000-25000
Hardness (A): 28-32
Tensile strength(kgf/cm2 ) ≥35
Tear strength (kgf /cm):≥30
Elongation break(%):≥470
Retractility (%):≤0.2
Curing agent mixed rate (%):2-3
Operate time (min): 30
Curing time (hours): 2-4
Model: HY-635 mold making silicon rubber
Appearance: white
Viscosity (cs): 30000-33000
Hardness (A): 35
Tensile strength(kgf/cm2 ) ≥40
Tear strength (kgf /cm):≥32
Elongation break(%):≥450
Retractility (%):≤0.2
Curing agent mixed rate (%):2-3
Operate time (min): 30
Curing time (hours): 2-4
mold making silicone rubber features:
1. Good characteristics of easy-operation
2. Light viscosity and good flowability
3. Low shrinkage
4. Excellent tensile and tear strength
5.Favorable hardness
6. High temperature resistance, acid and alkali-resistance and ageing resistance
7. High duplication times
Any questions of mold making silicon rubber, please feel free to contact Ms Sabrina
Tel: +86-755-89948006
Fax:+86-755-89948030
Mob: +86-18938867533
Skype: pengpeng2580 |
|
| » Posted by: Hongye Silicon Rubber Co.,Ltd [China] |
|
|
|
|
|
[Sell]
Medical Grade liquid silicone rubber for shoe insoles |
|
|
Application of Medical Grade liquid silicone rubber for shoe insoles
The product is a two component high elongation silicone gel designed for silicone food care products, such as silicone insole.
This product cured at room temperature to a soft track gel with the addition of curing agent. The soft nature and cushioning effect offer this product provides excellent protection for our food health care.
Technique Data of HY-Q625# Medical Grade liquid silicone rubber for shoe insoles
Model HY-Q625
Appearance Transparent
Mixing Ratio 1:1
Operating time (Mins 25°C) 30-40
Curing time (Mins 25°C) 2-4h
Hardness (A°) 25±2
Density ( g/cm 3 ) 1.08
Viscosity (CS) 6000 ± 2000
Tensile-strength( kgf/cm2 ) 3.3
Tear-strength (kgf /cm ) 8±2
Elongation-break(%) 420
Retractility(%) ≤0.1
Features of Medical Grade liquid silicone rubber for shoe insoles
1.convenient 1:1 mixed ratio by weight
2. high elongation gel
3. low viscosity easily pourable
4.room temperature vulcanized and heat acceleration
5. soft track and selcky gel
6. absorbs shock and protets delicate mechanical component
7. no creativ by –product, no concerns nogarding corrosion
Q: What are Foot Relief Insoles designed to do?
A: Foot Relief Insoles are fluid filled insoles that have five primary benefits and a long list of secondary benefits. The insoles are designed to cushion, massage, absorb shock, give arch support, and increase circulation. The liquid insole will form to almost any shape foot giving you a customized fit after only a few minutes of wear. Many customers refer to our liquid filled insoles as "liquid orthotics" because of the way the insoles stretch slightly allowing the liquid to fill in the unique arches of your foot providing maximum comfort.
Contact Ms.Vanessa
Tel: +86-0755-89311987
Mob: +86-18938867602
FAX: +86-0755-89948030
Youtuebe: https://www.youtube.com/user/siliconeRTV
Website: http://www.szrl.net
E-Catalogue: http://le-marketeur.com/Silicone-Rubber/E-Catalogue2013.swf
ADDRESS: Building A, No.3, Hongling First Road, Liulian Shibi, Pingdi Street, Longgang, Shenzhen, Guangdong, China
Zip code: 518117
|
|
| » Posted by: SHENZHEN HONG YE JIE TECHONOLOGY CO., LTD. [China] |
|
|
|
|
|
[Sell]
HY-9055 of Electronic Potting Silicone Rubber |
|
|
1. Product Feature of Electronic Potting Silicone Rubber
HY-9055 silicone rubber is a kind of low viscosity, Inherent flame resistance, two components addition cured potting silicone with heat-conducting. It cures with both on room temperature and heated temperature. It has the feature of the higher temperature the faster of the curing time. It can be applied to electronic components for insulation, waterproofing, fixed and flame retardant. It mainly applied in electronic components surface with materials of PC(Poly-carbonate)、PP、ABS、PVC, etc. and metal materials.
2. Typical Application of Electronic Potting Silicone Rubber
HY-9055 electronic potting silicone rubber could be applied to
- high powered electronics,
- DC/DC module and circuit board which requires heat dissipation and high temperature resistance.
-It can be broadly used for LED screen, Wind Power Generator, PCB substrate, etc.
3. Technical Guidelines of of Electronic Potting Silicone Rubber
a, Pls put part A and part B in separate container and stir evenly before mixing the two part together.
b, Mixing Ratio: part A: part B = 1:1
c, Deaeration the mixture in vacuum pump under 0.08 MPa for 3-5 minutes.Then the mixture could be used for pouring.
Note: The thickness of the silicone affects the curing time. If the silicone used is a little thick,then the curing time will be a little longer.The temperature also affects the curing time.When in lower temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization. With temperature of 80～100℃, the silicone will cure in 15 minutes; while in 25℃ room temperature, the silicone will cure around 8 hours.
4.Notes of Electronic Potting Silicone Rubber
a.The following material may hinder the curing of HY-9055, So pls use after the test. When necessary, pls clean the application areas.
Organotin compound or Condensation silicone with organotin
Sulphur, sulfide and sulfur rubber materials.
Amine compounds as well as contains the amine materials.
Contact Ms.Vanessa
Tel: +86-0755-89311987
Mob: +86-18938867602
FAX: +86-0755-89948030
Youtuebe: https://www.youtube.com/user/siliconeRTV
Website: http://www.szrl.net
E-Catalogue: http://le-marketeur.com/Silicone-Rubber/E-Catalogue2013.swf
ADDRESS: Building A, No.3, Hongling First Road, Liulian Shibi, Pingdi Street, Longgang, Shenzhen, Guangdong, China
Zip code: 518117
|
|
| » Posted by: SHENZHEN HONG YE JIE TECHONOLOGY CO., LTD. [China] |
|
|
|
|
|
[Sell]
Rtv Liquid Moulding Silicone Rubber |
|
|
1. Application of rtv liquid moulding silicone rubber :
RTV liquid molding casting silicone rubber is mainly applied for making various molds,such as reproduction of poly resin, epoxy, polyurethane-polymer, plaster, gypsum casting and moulding, soaps, candle & lighting, architecture, decorative arts and crafts, plastic toy, gift and stationery, big statue, cultural relic product, etc..
2. rtv liquid moulding silicone rubber data sheet
Model Appearance Viscosity(cs) Hardness(A°) Tensile Strength(kgf/cm) Tear Strength(KN/cm) Elongation(%) Mixing Ratio(%) Operating Time(H/250C) Curing Time(H/250C)
HY- 625 white 20000±1000 25±2 36±2 22±2 500 2~3 0.5 4~6
HY- 638 white 23000±2000 34±2 49±2 23±2 470 2~3 0.5 4~6
3. Operation tips of rtv liquid moulding silicone rubber
a. adding too much silicone oil will destroy the molecular of silicone rubber, which will cause a decrease of the tensile and tear strength of the mold and deformation may occur.
b. remember to take the proper silicone rubber to make the mold for suitable products. for products with delicate and complicated patterns, you are expected to use soft silicone to make molds. While for products with easy and smooth patterns, you should choose hard silicone rubber.
Plus: We have free CD on how to operate for our customers enclosed with product package.
Packaging Details: 25kg/drum and 200kg/drum
Delivery Time: within 3 days after payment confirmed in our bank.
Payment Terms: L/C,T/T, Western Union
Notice of rtv liquid moulding silicone rubber
1. sample is avalible
2. Reach certificate is avalible
3. FDA ,MSDS, RHOS, GSG are avalible
4. HS code:39100000
Please dont hesitate to ask if you have any questions about rtv liquid moulding silicone rubber , here Ms Vanessa is at your service:
Tel: +86-0755- 89311987
Mob: +86- 18938867602
FAX: +86-0755-89948030
Website: http://www.szrl.net
Youtuebe: https://www.youtube.com/user/siliconeRTV
|
|
| » Posted by: SHENZHEN HONG YE JIE TECHONOLOGY CO., LTD. [China] |
|
|
|
|
|
[Sell]
pad printing silicone rubber |
|
|
Place of Origin: Guangdong China (Mainland) Brand Name: Hong Ye Silicone Rubber
Min.Order Quantity: 200 Kilogram/Kilograms
Supply Ability: 8 Ton/Tons per Day
Port: shen zhen
Payment Terms: L/C,T/T,Western Union
Packaging Detail: 25kg/drum and 200kg/drum
Delivery Detail: within 3 days after payment confirmed in our bank.
USD:$10.48-14.78/kg
pad printing silicone rubber Application:
pad printing silicone rubber is mainly use for printing irregular patterns of plastic toys, electroplating toys and trade makers. Pad printing silicone rubber as a carrier which transfers patterns on the steel plate to the toys products surface.
pad printing silicone rubber Description:
pad printing silicone rubber has the advantages of abrasion resistance, high temperature resistance, good printing effect, etc. , which made of top-quality raw material due to adding American Dupont Teflon high-temperature resistance new material, is processed through high-temperature machining.
pad printing silicone rubber Datasheet:
Model Appearance Viscosity (cps) Hardness (Ao) Tensile Strength (Mpa) Tear Strength (KN/m) Elongation (%) Mixing Ratio(%)
928 red / white 15000 28±2 ≥25 ≥7 ≥420 9:1
pad printing silicone rubber Instruction:
Pad printing silicon rubber is two-component silicon, part A is the liquid silicon rubber, part B is the catalyst. The usual mixing ratio for silicon rubber and catalyst is 100:2-3, eg. We take 100grams of liquid silicon rubber, then we add 2-3 grams catalyst, mix then evenly and pour it to your mold. Then after 2-4 hours, you will obtain a printing pad.
pad printing silicone rubber Frequently asked question:
The reasons why the silicone pad has a short service life are listed as follows:
(1)The problem caused by inappropriate filtration of silicone rubber, and impurities in the packaging process due to the uncleanness of barrels and bags.
(2)The short service life of the silicone pad has a close relationship with the adding amount of silicone oil. The more the silicone oil added, the softer the silicone pad will be. The silicone oil will destroy the molecule of the silicone rubber, thereby bringing about the non-durable and easy ageing of the silicone pad.
(3)All the users should know the properties of pad printing silicone rubber. The service life of the silicone pad has close relationship with the size of the printed patterns. For example, if a big pattern to be printed, a big silicone pad is required; if a small pattern to be printed, a small silicone pad (the silicone pad has to be adjusted according to the size of the patterns, and the proportion between the size of the silicone pad and the pattern is 3:1.)
Why liquid silicone rubber for pad printing is incomplete or not clear?
(1)If the silicon pad is too hard while the pattern is very delicate or small, the printing patterns will be incomplete or not very clear, for in that way the silicon pad could not adsorb the printing ink from the steel plate well. If your pattern is very delicate or small, please use soft silicon pad for pad printing.
(2)If the percentage of water in the ink is very high, the printing pattern also will be incomplete, and spot may appeared. For this situation, please clean your ink box, or change the printing ink or Tianna water.
Need any help on silicone rubber, please feel free to contact Ms Lily:
Tel:86-755-89212369
Mob/Whatsapp:86-18938867593
E-mail: hyxe(at)szrl(dot)net
Skype:happynancy417 |
|
| » Posted by: SHENZHEN HONG YE JIE TECHONOLOGY CO., LTD. [China] |
|
|
|
|
|
[Sell]
M11 |
|
|
| M11 my whatsapp +8618968058020 |
|
| » Posted by: Hangzhou Zhenghan Biological Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
pentedrone |
|
|
| pentedrone my whatsapp +8618968058020 |
|
| » Posted by: Hangzhou Zhenghan Biological Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Butylone |
|
|
| Butylone my whatsapp +8618968058020 |
|
| » Posted by: Hangzhou Zhenghan Biological Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
MPHP |
|
|
| MPHP my whatsapp +8618968058020 |
|
| » Posted by: Hangzhou Zhenghan Biological Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Methoxetamine |
|
|
| Methoxetamine my whatsapp +8618968058020 |
|
| » Posted by: Hangzhou Zhenghan Biological Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
A-PVP |
|
|
| A-PVP my whatsapp +8618968058020 |
|
| » Posted by: Hangzhou Zhenghan Biological Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
A-PVTÂ |
|
|
| A-PVT my whatsapp +8618968058020 |
|
| » Posted by: Hangzhou Zhenghan Biological Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
6APB |
|
|
| 6APB my whatsapp +8618968058020 |
|
| » Posted by: Hangzhou Zhenghan Biological Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
5APDB |
|
|
| 5APDB my whatsapp +8618968058020 |
|
| » Posted by: Hangzhou Zhenghan Biological Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
5MAPB Â |
|
|
| 5MAPB my whatsapp +8618968058020 |
|
| » Posted by: Hangzhou Zhenghan Biological Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
PV8crystal |
|
|
| PV8 crystal my whatsapp +8618968058020 |
|
| » Posted by: Hangzhou Zhenghan Biological Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
4F-PV8 Â |
|
|
| 4F-PV8 my whatsapp +8618968058020 |
|
| » Posted by: Hangzhou Zhenghan Biological Technology Co., Ltd. [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 next»
|
|
|
