|
|
|
|
|
|
[Sell]
RTV tin catalyst silicone rubber |
|
|
Applications of RTV tin catalyst silicone rubber: RTV tin catalyst silicone rubber is mainly applicable to manual mold design, RTV tin catalyst silicone rubber can used to PVC plastic molds, cement product molds, melting point alloy molds, alloy toy craftworks, plastic toy craftworks, gifts and stationery, RTV tin catalyst silicone rubber can also used for large statues, duplication of cultural relics, shoe sole mold fabrication, pad printing positioning, shock resistance for electronic equipments, etc Features of RTV tin catalyst silicone rubber: 1. RTV tin catalyst silicone rubber have Good characteristics of easy-operation 2. RTV tin catalyst silicone rubber have Good characteristics of Ligh viscosity and good flowability 3. RTV tin catalyst silicone rubber have Good characteristics of Low shrinkage 4. RTV tin catalyst silicone rubber have Good characteristics of Favorable tension 5. RTV tin catalyst silicone rubber have Good characteristics of No deformation 6. RTV tin catalyst silicone rubber have Good characteristics of Favorable hardness 7. RTV tin catalyst silicone rubber have Good characteristics of High temperature resistance, 8. RTV tin catalyst silicone rubber have Good characteristics of acid and alkali-resistance 9, RTV tin catalyst silicone rubber have Good characteristics of ageing resistance For getting further information about RTV tin catalyst silicone rubber, PLS contact with Miss Nancy mob: 86-18938867585 |
|
» Posted by: shenzhen hongye jie technology co.,ltd [China] |
|
|
|
|
|
[Sell]
molding silicon rubber |
|
|
Applications of molding silicon rubber molding silicon rubber is mainly applied for making various molds,such as reproduction of poly resin, epoxy, polyurethane-polymer, plaster, gypsum, soaps, candle & lighting, architecture, decorative arts and crafts, plastic toy, gift and stationery, big statue, cultural relic product, etc.. Features of molding silicon rubber Low shrinkage, no deformation, good elasticity, high duplication times, etc. If you need more information of molding silicon rubber,PLS contact Miss Nancy Feng : TEL: 0086 -755 - 89948013 Mobile: 0086 -18938867585
|
|
» Posted by: shenzhen hongye jie technology co.,ltd [China] |
|
|
|
|
|
[Sell]
Dow Corning Silicone RTV 3481 |
|
|
Applications of HY625# similar to DC silicone RTV 3481# RTV- silicone rubber is mainly be used as following: 1.Decoration building mould making, including architecture column, porch column, interior column etc 2.Unsaturated rein crafts, epoxy resin crafts, poly resin crafts , plastic toys and so on. 3.Concrete decoration, garden statue ,plant, sculpture, Buddha and animal crafts . Introduction RTV-2 silicone rubber for molding are generally named Two part room-temperature Valcanizatoin silicone rubber, a kind elastic silicone rubber mold which features good resistance to deformation, good durability Features of Rtv-2 silicone rubber 1 .Two part of liquid fluid: liquid white silicone and curing agent. 2. Cure at room-temperature within 4-8 hours, but all performance will act perfectly when it cure within 24 hours. 3 .Good fluidity and excellent operation. 4 .Good resistance to weather, temperature, aging, acid.. 5 .Excellent tear strength, comfortable duplication times. Technology short compare of our HY625# and DC Silicone RTV 3481 : Model Color Mixing ratio (%) Pot life (mins) Demould time ( hrs) Hardness ( A0 ) Tensile-strength (kgf/cm2) Tear-strength (kgf/cm) Viscosity (cps) Shrinkage rate (%) Elongation (%) type DC3481# white 100 : 5 90 24 25 ≥ 40 ≥ 23 25000 ≤0.5 370% condensation HY625# white 100 : 5 30 4-6 25 ≥ 39 ≥ 25 23000 ≤0.3% 500% condensation Attention: Usually , we do not suggest customer to add silicone oil to the silicone to adjust the shore A. If necessary, we would suggest to add as 5% silicone oil. For getting further information about our silicone products, PLS contact with Miss Nancy TEL: 0086.-755-89948013 or Mobile: 0086-18938867585
|
|
» Posted by: shenzhen hongye jie technology co.,ltd [China] |
|
|
|
|
|
[Sell]
molding silicon rubber |
|
|
molding silicon rubber Applications of molding silicon rubber molding silicon rubber is mainly applied for making various molds,such as reproduction of poly resin, epoxy, polyurethane-polymer, plaster, gypsum, soaps, candle & lighting, architecture, decorative arts and crafts, plastic toy, gift and stationery, big statue, cultural relic product, etc.. Features of molding silicon rubber Low shrinkage, no deformation, good elasticity, high duplication times, etc. molding silicon rubber If the customer wants to make large products and large size molds, the mold should be made of silicon rubber with high hardness. On the contrary, if the mold with fine and precision patterns, it should be made of silicon with low hardness. The amount of the curing agent depends on the actual requirements of the customer. If molds requiring fast drying and demold, more curing agent is needed; contrarily, if molds requiring slower drying and demold, less curing agent is needed. (Note: our company does not recommend you to add silicone oil. If a special soft silicone mold or fine detailed and complex patterns products are required, 5%-10% silicone oil can be added to soften the mold for easy demold.) If you need more information of molding silicon rubber, PLS contact Miss Nancy Feng : TEL: 0086 -755 - 89948013 Mobile: 0086 -18938867585 |
|
» Posted by: shenzhen hongye jie technology co.,ltd [China] |
|
|
|
|
|
[Sell]
Sandblast hose |
|
|
Sandblast Hose 1) 25mm I.D. x 40mm O.D. x 20M long working pressure: 10-15KG blasting pressure: 40-60KG Packed in one weaving bag 2) 32mmI.D. x 48mm O.D. x 20M long working pressure: 10-15KG blasting pressure: 40-60KG Packed in one weaving bag
|
|
» Posted by: Shanghai Yuchang Sandblast Equipment Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Medical Grade liquid silicone rubber for shoe insoles |
|
|
Medical Grade liquid silicone rubber for shoe insoles Application of Medical Grade liquid silicone rubber for shoe insoles The product is a two component high elongation silicone gel designed for silicone inner bra electronic potting application, this product cured at room temperature to a soft tracky gel with the addition of curing agent. The soft nature and cushioning effect offer this product provides excellent protection of electronical assemblines from external humidity,mechanical shock and libration. Technique Data of HY-E625# Medical Grade liquid silicone rubber for shoe insoles Model HY-E625# Appearance Translucent Mixing Ratio 1:1 Operating time (Mins 25°C) 30-40 Curing time (Mins 25°C) 2-4h Hardness (A°) 25±2 Density ( g/cm 3 ) 1.08 Viscosity (CS) 6000 ± 2000 Tensile-strength( kgf /cm2 ) 25 ± 2 Tear-strength (kgf /cm2 ) >16 Elongation-break(%) 380 ± 50 Retractility(%) ≤0.1 Features of Medical Grade liquid silicone rubber for shoe insoles 1.convenient 1:1 mixed ratio by weight 2. high elongation gel 3. low viscosity easily pourable 4.room temperature vulcanized and heat acceleration 5. soft tracky and selcky gel 6. absorbs shock and protets delicate mechanical component 7. no creativ by –product, no concerns nogarding corrosion Any question abt RTV-2 liquid silicone rubber for mold making pls feel free to ask Aimee: Tel: 86-755-89948158 Mob: 86-18938867541 Fax: 86-755-89948030 Web: www dot szrl dot net Email: hysz@szrl.net |
|
» Posted by: Shen Zhen Hong Ye Jie Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Liquid life casting silicone rubber for adult women sex toys making |
|
|
Liquid life casting silicone rubber for adult women sex toys making 1. Description -Liquid life casting silicone rubber for adult women sex toys making Liquid life casting silicone rubber for adult women sex toys making is generally named two-components silicone rubber, Part A and part B. It features an exceptional fluidity and good operability. The mixing ratio is 1:1 or 1:1,mainly be suitable for making molds for adult sex toys. 2. Applications - Liquid life casting silicone rubber for adult women sex toys making Liquid life casting silicone rubber for adult women sex toys making could be mainly used for making concrete stones, wax molds, PU molds, resin molds, gypsum casting, candle molding and chocolate , candy and any other FDA food product mold making,prototyping etc. 3. Instruction- Liquid life casting silicone rubber for adult women sex toys making Liquid life casting silicone rubber for adult women sex toys making are generally named as two-part room temperature sulfurated silicone rubber, which features an exceptional fluidity and good operability. When mixed with 2-3% curing agent, they can still be operated within 30 minutes, but will be formed after 2-3 hours. With resistance to deformation, high temperature, acid and alkali, and expansion, silicon flexible molds are used for mold duplication and delicate mold making for poli crafts, resin crafts lighting and candle crafts. 4. Features- Liquid life casting silicone rubber for adult women sex toys making high tensile & tear strength (2) Low linear shrinkage (3)free Curing agent (4)brushing & pouring (5) high duplication times Any question abt RTV-2 liquid silicone rubber for mold making pls feel free to ask Aimee: Tel: 86-755-89948158 Mob: 86-18938867541 Fax: 86-755-89948030 Web: www dot szrl dot net Email: hysz@szrl.net |
|
» Posted by: Shen Zhen Hong Ye Jie Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Durable silicon rubber for pad printing |
|
|
Durable silicon rubber for pad printing: Quick details : Price: 7.8-15.6usd/kg Place of Origin: Guangdong China (Mainland) Brand Name: Hong Ye silicon rubber Color: Any color is available Certificate: ISO9001,SGS,REACH,RHOS application: for electronic toys ,trademark,silicon color Sample: free Package: 20kg/drum port:shenzhen Specifications: Features of durable pad printing silicon rubber : ★ good printing effect ; ★ clear printing ; ★ excellent resilience; ★ without any impurity. Durable silicon rubber for pad printing Characteristics of durable silicon rubber for pad printing: ★ Durable pad Printing silicone rubber is a double-component silicone rubber, and can be vulcanized in room temperature. Solidify time depends on the mount of curing agent, the more the curing agent, the faster the curing. Application of durable silicon rubber for pad printing: ★ Durable silicon rubber for pad printing is applicable to plastics toys, electroplating products, PVC toys, plastics toys, craftworks, trademarks and irregular pattern printing .it has the advantage of abrasion resistance, high temperature resistance, good printing effect, etc. Usage of durable pad Printing silicone rubber: 1. Uniformly stir the pad printing silicone rubber for 5-10 minutes in the package barrel before use. 2. Clean the mold with detergent, and dry up the mold by a piece of cloth or an air gun and then coat the mold with a layer of release agent. 3. The normal proportion between the printing silicone and si-oil depends on the requirements of the customers. If pattern is too big, a soft silicon pad is needed and the amount of si-oil is increased. Contrarily, if a silicon pad with high hardness is needed, the silicone oil should be added less or not. The appropriate hardness of general pad printing silicone rubber is 15A?~-25 A?; if too much silicone oil is added, the silicon pad is so soft that the printing times is limited, thereby bringing about abrasion intolerance, solvent intolerance and ageing FQA of durable pad Printing silicone rubber : ★ Why is the absolutely pure silicon rubber non-durable are? 1. Because of the imcompleted process of filtering , there are some impurities left in the pad printing silicon rubber . 2. As we know, silicon oil is a additive which will destroy the molecular chain of the pad printing silicon rubber ,then it will cause the easy ageing . 3. some customers don?t change the printing pad according to the size of the pattern , for large pattern, large silicon pad should be used ,otherwise ,use small one . Packaging & delivery : Packaging Detail: 25kg/drum 200kg/drum Delivery Detail: 3 days after receiving the bank receipt Any question abt RTV-2 liquid silicone rubber for mold making pls feel free to ask Aimee: Tel: 86-755-89948158 Mob: 86-18938867541 Fax: 86-755-89948030 Web: www dot szrl dot net Email: hysz@szrl.net |
|
» Posted by: Shen Zhen Hong Ye Jie Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Good qulity silicon rubber for mould making |
|
|
Good qulity silicon rubber for mould making : Quick details : Price: 6.2 -10.2usd/kg Place of Origin: Guangdong China (Mainland) Brand Name: Hong Ye silicon rubber Color:white Certificate: ISO9001,SGS,REACH,RHOS features: Hot stamping silicone roller,Special high temperature resistance Sample: free Package: 25kg/drum and 200kg/drum port:shenzhen Specifications of RTV-2 liquid silicon rubber for mould making ★Moderate hardness ★high tear strength and intensity ★high intensity ★outstanding alkaline and heat resistance ★less deformation Applications of RTV2 liquid silicone rubber for mould making ★RTV2 liquid silicone rubber for mould making is intended for statue mold making , candles. ★RTV2 liquid silicone rubber for mould making is application for plastic toys, relieve furniture. ★RTV2 liquid silicone rubber for mould making is used for architectural decoration, furniture decorative. ★RTV2 liquid silicone rubber for mould making is application for sculpture, art crafts mold making and so on. Features of RTV2 liquid silicone rubber for mould making ★RTV2 liquid silicone rubber for mold making is flowing liquid with general hardness of 22-50A? after curing with features: ★RTV2 liquid silicone rubber for mold making is resistance to deformation and high-temperature, acid-alkali and expansion ★ RTV2 liquid silicone rubber for mold making is good tensile strength, tear strength and elongation ★ RTV2 liquid silicone rubber for mold making is high reproduction times Frequently asked questions of RTV2 liquid silicone rubber for mold making ★Why does the silicone rubber mold have few molding times? RTV2 liquid silicone rubber for mold making has few molding times is due to follwoing reasons: Adding too much silicone oil which will destroy the molecular of silicone rubber; Making the mold for small and fine detailed products with higher hardness silicone rubber which is easy to break; Making the mold for large products with soft silicone rubber which will reduce the tensile and tear strength of the mold, and the mold will have deformation. Thus, we should take the proper silicone rubber to make the mold for suitable products. Packaging & delivery : Packaging Detail: 25kg/drum 200kg/drum Delivery Detail: 3 days after receiving the bank receipt Any question abt RTV-2 liquid silicone rubber for mold making pls feel free to ask Aimee: Tel: 86-755-89948158 Mob: 86-18938867541 Fax: 86-755-89948030 Web: www dot szrl dot net Email: hysz@szrl.net |
|
» Posted by: Shen Zhen Hong Ye Jie Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Addition (platinum) cured RTV-2 Silicones |
|
|
Addition (platinum) cured RTV-2 Silicones Quick details : Price: 6.2 -10.2usd/kg Place of Origin: Guangdong China (Mainland) Brand Name: Hong Ye silicon rubber Color:white (as request) Certificate: ISO9001,SGS,REACH,RHOS Sample: available mixing ratio: 1:1 port:shenzhen Description of Addition RTV-2 cured silicons ★addition RTV-2 cured silicones are generally named as two-part addition silicone rubber that vulcanises at room temperature. ★addition RTV-2 cured silicones Part A is a flowable liquid, part B is the curing agent(platinum catalyst). ★addition RTV-2 cured silicones features an exceptional fluidity ,good operability,excellent physical properties and very low shrinkage. ★addition RTV-2 cured silicones mixing ratio between Part A and Part B can be 10:1 or 1:1. Main application of addition (platinum) RTV-2 cured silicones ★ Rapid prototyping (urethane casting/silicone tooling/vacuum casting) ★ Concrete moulding ★ PU resin casting ★ General Mould making ★ Superior manual mold design Addition silicon mian pro perties ★ addition RTV-2 cured silicones is almost nil shrinkage ★ addition RTV-2 cured silicones is high chemical resistance to aggressive components of some types of resins ★ addition RTV-2 cured silicones is good tear strength (this feature ensures higher resistance to wearing and shearing) ★ addition RTV-2 cured silicones is high degree of precision in reproduction ★ addition RTV-2 cured silicones is high dimensional stability over time and non-deformability ★ addition RTV-2 cured silicones is high resistance to high temperatures and ageing (resit to -60-200?C) ★ addition RTV-2 cured silicones is excellent non-stick effect ★ addition RTV-2 cured silicones is environmental, odorless and nontoxic Notice of addition RTV-2 cured silicones All above addition RTV-2 cured silicones is forbidden to mix with organic compounds of condensation cure silicone rubber,otherwise, the silicone rubber will not cure, and also should not mix with organic compounds containing S, P, N as well as metallic salt of organic acids. It also will cause this product cure uncompletely or not cure. Packaging & delivery : Packaging Detail: 20kg/drum and 200kg/drum Delivery Detail: 3 days after receiving the bank receipt Any question abt RTV-2 liquid silicone rubber for mold making pls feel free to ask Aimee: Tel: 86-755-89948158 Mob: 86-18938867541 Fax: 86-755-89948030 Web: www dot szrl dot net Email: hysz@szrl.net
|
|
» Posted by: Shen Zhen Hong Ye Jie Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Silicon rubber for mold making |
|
|
Silicon rubber for mold making Silicon rubber for mold making applications 1. Silicon rubber for mold making can used for poly resin crafts, PU crafts, PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy , stationery gifts crafts industry, 2. Silicon rubber for mold making is applicable for large statue Buddha, relieve ,furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold 3. Silicon rubber for mold making is intend for artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on. Silicon rubber for mold making features Silicon rubber for mold making is white flowing liquid with general hardness of 22-50A?after curing with features ------ (1) high tensile & tear strength (2) high duplication times (3) Low linear shrinkage (4) resistance to high-temperature (5) Low shrinkage and non-deformation (6)resistance to acid-alkali and expansion Silicon rubber for mold making operation instructions Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly. Step Two: vacuum pumping Without exception, this step takes less than 10 minutes. Note: The time for vacuum-pumping should be less than 3?5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated. Step Three: Brushing cast & Perfusion Molding operation Shelf life for silicon rubber for mold making 10~12months, when stored in a dry & cool place under the room temperature 25. Packing for silicon rubber for mold making 1kg/ bottle , 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing,200 kg/drum For more information , pls feel free to contact Ms Mary office no. :0086-755-89948019 Mob:86-18938867578 Skype: mary901116 Email :hyxh(at)szrl(dot)net Welcome to our website www dot szrl dot net
|
|
» Posted by: SHENZHEN HONG YE JIE TECHONOLOGY CO; LTD. [China] |
|
|
|
|
|
[Sell]
Silicone products ( Rubber products ) |
|
|
We can design and produce according to your requirements. We have our own tool design, molding and produce department, many years production experience and professional technology. certificate:ISO9001,ISO14001,ROHS,REACH,UL,FDA Excellent quality, reasonable competitive price&timely delivery assure the quality and machine ability. Our markets are mainly in European Union and the United States and have cooperated with many famous companies. We can design the rubber injection mould according to your drawings and your requirements. We can make all kinds of mold rubber part .The applicable material will be silicone,NR,NBR,SBR,EPDM,CR,TPE,PVR ETC,We also provide the assembly of the products.Your suggestions and requirements will also be considered during our design and production. We can provide a full and good service with competitive price for your products. Very Brief Step: 1.Climents offer drawings in format of stp,igs,prt or solidworks and sufficient information of their plastic parts. 2.We offer the quotation of plastic injection molds and plastic injection molding(plastic parts)in half a day. 3.Clients conside our quotations. 4.Clients place the order. 5.We design and manufacture the rubber injection molds in lead time after confirming the drawings and detailed information with clients again. 6.Rubber injection mold trial samples sent to clients to get their confirmation and see if there is any modification before mass production. 7.Arrange mass production at once and finish the production before the lead time. For getting further information about silicone rubber Products, PLS contact with Miss Caroline TEL: +86-755-89948019 Mobile: +86-18938867567 Email: cathy19900719(at)gmail (dot )com or hysf(at)szrl(dot)net Website : www(dot)szrl(dot)net
|
|
» Posted by: Shenzhen Hong Ye Jie Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Shoe mold silicone rubber |
|
|
1. Shoe mold silicone rubber applications Shoe mold silicone rubber is mainly used for shoe molds, sand casting, sole sampling, plaster models, simple products, products with non-complex patterns, as well as product models with stable size and non-deformation. 2. Features of Shoe mold silicone rubber a. mainly used for shoe soles mold making b. Two-component silicone rubber with tin-catalyst c. Cured under room temperature d. low shrinkage e. excellent flexibility & easy demould 3. Shoe Mold Silicone Rubber Using Instruction: The component A of shoe Mold Silicone Rubber is white flowing liquid and the component B is the curing agent. a. Take silicone rubber of 100g and add 2% curing agent for mixing evenly. b. After the silicone rubber and the curing agent are completely mixed, put the silicon into a vacuum machine for desiring to remove the bubbles. c. After desired, pouring the liquid silicone rubber into the product to be duplicated or into the mold frame. Notes: Shoe mold silicone rubber is used for pouring or brushing technique. That is to say, fix the product or sole model to be duplicated onto a plane plate, then enclose the plane frame with wooden plates to prevent the leakage of the silicon, mix the silicone rubber and the curing agent evenly according to the mixing ratio of 100: 2 and pour them onto the sole model, then brush evenly with a wooden plate or a brush, and fill up the mold frame with gypsum after the silicone rubber is dried Place of Origin Guangdong China Brand Name Hong Ye Silicone Rubber Model Number HY218, HY238 shoe mold silicone rubber Payment & Shipping Terms: Minimum Order Quantity: 200 Kilogram Price: FOB Shenzhen USD 4.8~5.4/KG Packaging Details: 25kg/drum and 200kg/drum Delivery Time: within 3 days after payment confirmed in our bank Payment Terms: L/C, T/T Supply Ability: 8 Ton per Day Certifications: RoHS.MSDS.SGS ISO9001:2000 Further information on Mould making silicone rubber is available. Any questions of RTV-2 silicone rubber for Mould making silicone rubber, please feel free to contact Leah Please feel free to contact Leah. Mobile: 0086-18938867561 Tel: 0086-755-89948294 Fax: 0086-755-89948030 E-mail: Hyji(at)szrl(dot)net Website: www(dot)szrl(dot)net
|
|
» Posted by: Shenzhen Hong Ye Jie Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Addition cure silicone rubber |
|
|
1. Applications of Addition cure silicone rubber: Addition cure silicone rubber is mainly used for metallic arts & crafts, baby nipples, cake; candy food grade products mold making, life casting, medical catheter and so on. 2. Features of addition cure silicone rubber: Two-component silicone rubber with platinum catalyst With high transparency, tensile strength, and tear strength. Nontoxic & reach to Food grade With good heat stability and weather ability (temperature resistant range of -60~250 C) With heat-ageing resistance Place of Origin Guangdong China Brand Name Hong Ye Silicone Rubber Model Number HY-E620, HY-E630, HY-E642 addition cure silicone rubber Payment & Shipping Terms: Minimum Order Quantity: 100 Kilogram Price: FOB Shenzhen USD 9.35~14/KG Packaging Details: 20kg/drum and 200kg/drum Delivery Time: within 3 days after payment confirmed in our bank. Payment Terms: L/C,T/T Supply Ability: 8 Ton per Day Certifications: RoHS.MSDS.SGS ISO9001:2000 Any further information required of addition cure silicone rubber, pls feel free to contact Ms Leah (sales manager) Mobile: 0086-18938867561 Tel: 0086-755-89948013 Fax: 0086-755-89948030 E-mail: LeahRTV(at)hotmail(dot)net Website: www(dot)szrl(dot)net
|
|
» Posted by: Shenzhen Hong Ye Jie Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Mould making silicone rubber |
|
|
1. Applications of Mould making silicone rubber Mould making silicone rubber is primarily intended for: Poly resin crafts, PU crafts, PU resin crafts, gypsum crafts, unsaturated resin crafts Lighting and candles crafts, plastic toy, stationery gifts crafts industry A large statue Buddha, statues Buddha, artifacts copied Furniture, furniture decorative materials, building decoration materials, large-scale cement mold Artificial fossils Factory, Europe component factory Simulation landscapes, animals and plants sculpture, sandstone crafts 2. Features of Mould making silicone rubber Mould making silicone rubber is a two-part condensation liquid rubber. It is a kind of white or red flowing liquid with general hardness of 22-50A° after curing which has the advantage of: Low viscosity, exceptional fluidity and easy operation Resistance to deformation, high-temperature Acid, alkali and ageing-resistance Low shrinkage good tensile strength, High reproduction times 3. Operation tips of Mould making silicone rubber Adding too much silicone oil will destroy the molecular of silicone rubber, which will cause a decrease of the tensile and tear strength of the mold and deformation may occur. Remember to take the proper silicone rubber to make the mold for suitable products. For products with delicate and complicated patterns, you are expected to use soft silicone to make molds. While for products with easy and smooth patterns, you should choose hard silicone rubber. Plus: We have free CD on how to operate for our customers enclosed with product package. Place of Origin Guangdong China Brand Name Hong Ye Silicone Rubber Model Number HY625 HY630 silicone rubber Payment & Shipping Terms: Minimum Order Quantity: 200 Kilogram Price: FOB Shenzhen USD 5.8~7.5/kg Packaging Details: vacuumed thick PE bag /25kg/drum and 200kg/drum Delivery Time: within 3 days after payment confirmed in our bank Payment Terms: L/C at sight, T/T, Western Union Supply Ability: 8 Ton per Day Certifications: RoHS. MSDS.SGS ISO9001:2000 Further information on Mould making silicone rubber is available. Any questions of RTV-2 silicone rubber for Mould making silicone rubber, please feel free to contact Leah Please feel free to contact Leah. TEL: 0086-755-89948294 FAX: 086-755-89948030 MOBILE: 086-189 3886 7561 Website: www(dot)szrl(dot)net E-MAIL: Hyji(at)szr(dot)net
|
|
» Posted by: Shenzhen Hong Ye Jie Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Hordenine hydrochloride |
|
|
PreView CBNumber CB6203243 hordeninehydrochloride MF C10H16ClNO MW 201.69 CAS 6027-23-2 MOL Mol file |
|
» Posted by: Hebei Duoke Chemical Technology Co., Ltd [China] |
|
|
|
|
|
[Sell]
4-BMC |
|
|
PreView CBNumber CB32519123 4-BMC MF C10H12BrNO MW 242 CAS 486459-03-4 MOL Mol file |
|
» Posted by: Hebei Duoke Chemical Technology Co., Ltd [China] |
|
|
|
|
|
[Sell]
BMS-564929 |
|
|
CBNumber CB92627608 BMS 564929 MF MW CAS 627530-84-1 MOL Mol file |
|
» Posted by: Hebei Duoke Chemical Technology Co., Ltd [China] |
|
|
|
|
|
[Sell]
Silicone rubber for concrete molds |
|
|
Silicone rubber for concrete molds applications 1. Silicone rubber is mainly used for concrete statue, concrete veneer, concrete paving, concrete fountain, faux stone, man -made stone and all kinds of concrete products. Silicone rubber for concrete molds features Silicon rubber for concrete molds is white flowing liquid with general hardness of 22-50A?after curing with features ------ (1) High tensile & tear strength (2) High duplication times (3) Low linear shrinkage (4) Resistance to high-temperature (5) Low shrinkage and non-deformation (6) Resistance to acid-alkali and expansion Silicon rubber for concrete molds operation instructions Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly. Step Two: vacuum pumping Without exception, this step takes less than 10 minutes. Note: The time for vacuum-pumping should be less than 3-5 minutes. Otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated. Step Three: Pouring the vacuumed silicone mixture into the frame with original concrete mold. Shelf life for silicon rubber concrete molds 10~12months, when stored in a dry & cool place under the room temperature 25. Packing for silicon rubber for concrete molds 1kg/ bottle, 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing, 200 kg/drum For more information, pls feel free to contact Miss Bella Tel: 0086-755-89948006 Mob: 86-18938867572 Fax: 0086-755-89948030 Email:hysi(at)szrl(dot)net Skpye: bellajiaqi |
|
» Posted by: SHENZHEN HONG YE JIE TECHONOLOGY CO., LTD. [China] |
|
|
|
|
|
[Sell]
Liquid Silicone rubber for gypsum molds |
|
|
Liquid Silicone rubber for gypsum applications 1. Liquid Silicone rubber can used for gypsum crafts, gypsum statues , gypsum ceiling rose , gypsum columns , gypsum line , gypsum ceiling board ,and all kinds of gypsum decorations . Liquid Silicone rubber for gypsum features Liquid Silicone rubber is two part silicone with general hardness of 22-50A?after curing with features ------ (1) high tensile & tear strength (2) high duplication times (3) Low linear shrinkage (4) resistance to high-temperature (5) Low shrinkage and non-deformation (6)resistance to acid-alkali and expansion Liquid Silicone rubber for gypsum operation instructions Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly. Step Two: vacuum pumping Without exception, this step takes less than 10 minutes. Note: The time for vacuum-pumping should be less than 3-5 minutes. Otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated. Step Three: Pouring the mixture into the frame with original gypsum mold slowly. Shelf life for Liquid Silicone rubber 10~12months, when stored in a dry & cool place under the room temperature 25. Packing for Liquid Silicone rubber 1kg/ bottle, 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing, 200 kg/drum For more information, pls feel free to contact Miss Bella Tel: 0086-755-89948006 Mob: 86-18938867572 Fax: 0086-755-89948030 Email:hysi(at)szrl(dot)net Skpye: bellajiaqi |
|
» Posted by: SHENZHEN HONG YE JIE TECHONOLOGY CO., LTD. [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 next»
|
|
|