|
|
|
|
|
|
|
[Sell]
Embossed Metal Panels |
 |
|
Standard Size: In sheets 2000 x 1000 mm.
Material: Produced in mild steel, aluminum, stainless steel, etc.
Applications: Metallic constructions and industrial uses.
Sheet Thickness: Varied according to patterns of embossing. From 1, 1.5, 2 and 3mm.
Embossed perforated metal sheet is ideal for industrial corridors, automotive defenses, making of platforms and stairs.
Melon seeds pattern:(Aluminum and stainless)
|
|
» Posted by: Blatt Perforated Metal Co. [China]  |
|
|
|
|
|
[Sell]
Perforated Metal Screen |
|
|
Perforated metal panels and screens for architecture can be used as balcony, partitions, façade, elevator cabinet and other parts of buildings.
Materials: Stainless steel sheets, aluminum or galvanized iron sheets.
Specify the following when order:
Materials;
Hole pattern;
Open area;
Strength;
Hole size and thickness.Typical patterns for perforated screen include slotted, embossed, diamond, square and round.Slotted perforated metal is produced in ferrous materials in plates, stainless steel or galvanized steel.
Oblong Slotted Perforated Metal Screen Information:
3.175 x 25.400 mm oblong slot
6.350 mm centers
Side Staggered
43% open
22 gauge steel
Length of oblong slots run length of sheet.
1/4" Slotted Perforated Metal Screen
6.350 x 38.100 mm slot
Every third bridge 4.763 mm wide
Other bridges 2.381 mm
67% open area of sheets
16, 18, 20 gauge steel
Length of slots runs width of perforated sheet.
Mesh sizes and plate thickness typical available:
Ф DE 1.2X5 D/C 7 X 7.5mm
Ф DE 2X14 D/C 14X21mm
Ф DE 2.5x20 D/C14X25mm
To:
Ф DE 5X20X D/C 16X44mm
Ф DE 8X20 D/C 25X46mm
Custom orders with gauges and sizes available.
|
|
| » Posted by: Blatt Perforated Metal Co. [China] |
|
|
|
|
|
[Sell]
Perforated Tube |
|
|
Perforated Metal Tubes are popularly used in filter products as support tubing, and sometimes it is used directly as filter tubes and cylinders for certain industries.
We supply perforated tubes to support the filter media in making of various filter elements. Using of perforated metal adds more strength and pressure resistance in filter flow.
Micron opening perforated metals are used as filters or screens itself in the screening of coal, gravel and ore; in the shifting and separation of food products and medical material, fine chemicals and oil. Made of quality stainless steel or carbon steel sheets, perforated filter tubes and cylinders can be made spiral welded or butt welded in a wide range of sizes.
Specify the following when you order perforated tubes from us:
Materials: stainless steel, aluminum, or other materials.
Hole pattern: Micron round, diamond and others.
Open area: It will determine the strength of the support tube and the filter flow.
Hole size and thickness: Various to meet different requirements for tubing strength and filtration.
The mostly used stainless steel perforated tubes include 304, 304L, 316, 316L. Carbon steel can also be used.
Hole patterns include round, square, hexagonal, oval and special openings.
The thickness of metal tubes perforated: 0.2mm to 15mm
Opening diameter: 0.2mm to 100mm
Processes involved in making of perforated tubes: Perforating, flattening, rolling, cutting, bending, edging, welding and finishing.
|
|
| » Posted by: Blatt Perforated Metal Co. [China] |
|
|
|
|
|
[Sell]
Decorative Perforated Mesh |
|
|
The perforated plate can be manufactured in various steels, measures, standard models and special designs that are tailored to the needs of each industry. Engineers, architects and designers also are finding increasingly uses for the metal plates perforated in various presentations of design and materials.
Decorative stainless steel perforated metal, non-magnetic, type 304 or 316. The type 316 provides greater resistance to corrosion, making it suitable for photographic industries, food, chemicals and shipbuilding.
Sheet thick with reinforced edges Tolerance in the size of the sheet metal + /-5mm
Dimensions: Square opening, Hex opening, Oblong, Special
Sizes of perforated sheets in stainless steel 304: 500x500mm, 1000x500mm
|
|
| » Posted by: Blatt Perforated Metal Co. [China] |
|
|
|
|
|
[Sell]
Perforated Metal |
|
|
Carbon Steel / Aluminum / Stainless Steel
Virtually every industry uses Perforated Metal Products and the list of applications grows daily. Perforated metal has a greater more predictable and accurate load bearing capacity than expanded metal or wire mesh. Perforated Metal is widely used in automotive, lighting, construction, agriculture, petrochemical, laundry, mining, military and acoustical applications.
Perforated metals contain hole patterns of varying sizes and shapes created by punching presses. Types of hole patterns include staggered rounds, centers and squares, straight square slots, round and line squares, round slot end and side staggered and hexagons.
Features of perforated metal compared with expanded metal and how to choose products between them:
Expanded metal is similar to perforated metal, but it has been cut, rather than punched, and stretched into a shaped framework. Materials out of which expanded metal is made include sheets of steel, stainless steel, aluminum, tin, copper and plastic. Flattened expanded metal has been cold rolled to reduce thickness and increase surface smoothness. Using expanded metal is an ecologically-minded approach, as it is elaborated from discarded raw material. Expanded metal is basically transparent, has high resistance and excellent mechanical properties and is an excellent conductor. Expanded metal can be made out of non-metal products such as plastic, which then makes it an insulator.
Perforated and expanded metal possess numerous uses in a wide variety of applications. Perforated metals are used for filtration, reinforcement and decoration. Perforated metal manufacturers provide products that can be made into screens, filters, baskets, trash cans, tubing, light fixtures, vents, audio speaker covers and patio furniture. Like perforated metals, expanded metals are also used for filtration, reinforcement and decoration. Common applications include enclosures, such as lockers and cages, supportive structures, such as grating, shelves and catwalks and protective structures, like guards and fencing. Because of their many uses, perforated and expanded metal is found in almost every industry, including the automotive, chemical, pharmaceutical, waste management and construction industries.
|
|
| » Posted by: Blatt Perforated Metal Co. [China] |
|
|
|
|
|
[Sell]
offer film faced plywood |
|
|
FILM FACED PLYWOOD
1. Core: poplar, combi, birch ,hardwood
2. Face and back: poplar or birch
3. Film: black or brown
4. Size: 1220 mmX2440mm or 1250mmX2500mm
5. Grade: A/A
6. Glue: WBP,MELAMINE,MR
7. Thickness: 12mm---30mm
8. Surface type:smooth/smooth,smooth/anti-slip
Contact person:wendy
email:wendy@joyowood.cn
|
|
| » Posted by: Langfang Joyowood Trade.Co.Ltd [China] |
|
|
|
|
|
[Sell]
Ornamental Fence |
|
|
Special Features: Ornamental fencing can provide many levels of security for residential, commercial or industrial app
ornamental fencing has enhanced the architectural beauty of houses, buildings and churches. Originally fashioned from wrought iron designed and forged by blacksmiths, today's ornamental fencing is crafted using modern materials and current production techniques. Steel or aluminum components are fabricated into sections using fasteners, locking rods, or welding. Once you determine your requirements, you'll find it's easy to select the appropriate ornamental fence for your application.
|
|
| » Posted by: Anping YuanJing Metal Products Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
Ornamental Fence |
|
|
Special Features: Ornamental fencing can provide many levels of security for residential, commercial or industrial app
ornamental fencing has enhanced the architectural beauty of houses, buildings and churches. Originally fashioned from wrought iron designed and forged by blacksmiths, today's ornamental fencing is crafted using modern materials and current production techniques. Steel or aluminum components are fabricated into sections using fasteners, locking rods, or welding. Once you determine your requirements, you'll find it's easy to select the appropriate ornamental fence for your application.
|
|
| » Posted by: Anping YuanJing Metal Products Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
Refractory Brick , Refractory Materials |
|
|
We supply all kinds of refractory materials and refractory products,if you need ,please don't hesitate to contact Ms.Vicky .
refractory products
Silica Brick
Semi-Silica Brick
Clay Brick
Neutral Refractory Material
High Aluminum Brick
Mullite Brick
Corundum Brick
Sialon Bonded Corundum Brick
Carbon Based Refractory
Carbon Brick
Al2O3-C Brick
Zirconium-C Brick
Carborundum Brick
Zirconium Refractory
Zirconium Stone Brick
Sintered Chrome-Corundum Brick
Electro Cast Zircon- Corundum Brick
Zircon-Mullite Brick
High Chrome Brick
Basic Refractory
Magnesia Fefractory
Magnesia Brick
Magnesia Alumina Brick
Magnesia Chrome Brick
Magnesia Calcium Brick
Magnesia Carbon Brick
Spinel Brick
Alumina Magnesia Brick
Functional Refractory Products for Metallurgy
Purging Plugs
Well Block and Mortar for Plugging Plugs
Zirconic Metering Nozzles
Ladle Shroud Submerged Entry Nozzle and Monolithic Stopper
Thermal Insulating Refractories
Alumina Bubble Brick
Zirconia Bubble Brick
Silica Board
Ceramic Fiber Board Blanket Felt
Best regards,
Vicky
China Abrasives
tel : 86 371 67639843
fax: 86 371 67640066
Skype: VICKY-NEMO
Yahoo ID : caeczhao
email : caeczhao[at]126.com
MSN: caeczhao[at]hotmail.com |
|
| » Posted by: CHINA ABRASIVES I/E CORP. [China] |
|
|
|
|
|
[Sell]
Refractory Brick , Refractory Materials |
|
|
We supply all kinds of refractory materials and refractory products,if you need ,please don't hesitate to contact Ms.Vicky .
refractory products
Silica Brick
Semi-Silica Brick
Clay Brick
Neutral Refractory Material
High Aluminum Brick
Mullite Brick
Corundum Brick
Sialon Bonded Corundum Brick
Carbon Based Refractory
Carbon Brick
Al2O3-C Brick
Zirconium-C Brick
Carborundum Brick
Zirconium Refractory
Zirconium Stone Brick
Sintered Chrome-Corundum Brick
Electro Cast Zircon- Corundum Brick
Zircon-Mullite Brick
High Chrome Brick
Basic Refractory
Magnesia Fefractory
Magnesia Brick
Magnesia Alumina Brick
Magnesia Chrome Brick
Magnesia Calcium Brick
Magnesia Carbon Brick
Spinel Brick
Alumina Magnesia Brick
Functional Refractory Products for Metallurgy
Purging Plugs
Well Block and Mortar for Plugging Plugs
Zirconic Metering Nozzles
Ladle Shroud Submerged Entry Nozzle and Monolithic Stopper
Thermal Insulating Refractories
Alumina Bubble Brick
Zirconia Bubble Brick
Silica Board
Ceramic Fiber Board Blanket Felt
Best regards,
Vicky
China Abrasives
tel : 86 371 67639843
fax: 86 371 67640066
Skype: VICKY-NEMO
Yahoo ID : caeczhao
email : caeczhao[at]126.com
MSN: caeczhao[at]hotmail.com |
|
| » Posted by: CHINA ABRASIVES I/E CORP. [China] |
|
|
|
|
|
[Sell]
(Silica Fume) Micro Silica For Building Industry And For Refractory Industry |
|
|
We are the large supplier for undensified and densified micro silica (silica fume ) used for concrete and refractory industry (SiO2: 85%-97%) .Especially we supply you according your special requirements .
Silica fume in concrete
Characteristics of Silica Fume
- Significantly enhanced compressive strength
- Significantly reduced permeability
- Improved corrosion resistance
- Improved pumpability
- Improved cohesion/resistance to segregation
- Improved adhesion
- Improved abrasion resistance
- Increased electrical resistivity
- Improved resistance to most sulphates and various other forms of chemical attack.
Applications for Silica Fume
Marine concrete
- High strength concrete
- Concrete subjected to aggressive groundwater conditions
- Chemical plants
- Industrial floors subject to high abrasion levels
- Dams and spillways for strength and abrasion resistance
- Shotcrete, for reduced rebound, and improved cohesion/adhesion
- Grouts and mortars/Repair concrete
- Jobs requiring long pump lines
- Watertight basements.
Silica fume in refractory
Enhancing the fluid of pouring refractory, reducing the volume of used water, be easy to shape, and raising the production efficiency.
Because of its untramicrostructure for gap filling, the compact and intensity of refractory gain rising by a wade margin.
Silica fume is a highly effective pozzolanic material, so it's easy to come into being Mullite Phase, under the premise that Al2O3 exists, enhance elevated temperature strength and thermal shock of refractory.
Contact person: Ms.Vicky
Tel: 86 371 67639843
Fax: 86 371 67640066
E-mail : caeczhao[AT]hotmail.com
caeczhao[AT]126.com
MSN : caeczhao[AT]hotmail.com
SKYPE: VICKY-NEMO
|
|
| » Posted by: CHINA ABRASIVES I/E CORP. [China] |
|
|
|
|
|
[Sell]
Softwood Scaffolding Plank (Pine LVL Wood) |
|
|
Laminated Veneer Lumber
Quality: Top Grade/A Grade </P>
Inner packing: </P>
Inside pallet is wrapped with a 0.20mm polyester film </P>
Outer packing: </P>
Pallets are covered with plywood and then PVC/steel tape for strength </P>
dimension: 20-100mm x 100-1250mm x 1000-6000mm. </P>
Glue: WBP glue (top grade phenolic resin) </P>
Application: construction, for scaffolding use. </P>
For 3000x300x40mm, put force equals to 113kgs in the middle of the plank, the warp can not be more than 5cm. </P>
Conveyance: </P>
Qty/40' FCL: 40cbm
Qty/40' HQ: Overweight </P> |
|
| » Posted by: Linyi Yueyang Wood Co.,Ltd [China] |
|
|
|
|
|
[Sell]
Softwood Scaffolding Plank (Pine LVL Wood) |
|
|
Laminated Veneer Lumber
Quality: Top Grade/A Grade </P>
Inner packing: </P>
Inside pallet is wrapped with a 0.20mm polyester film </P>
Outer packing: </P>
Pallets are covered with plywood and then PVC/steel tape for strength </P>
dimension: 20-100mm x 100-1250mm x 1000-6000mm. </P>
Glue: WBP glue (top grade phenolic resin) </P>
Application: construction, for scaffolding use. </P>
For 3000x300x40mm, put force equals to 113kgs in the middle of the plank, the warp can not be more than 5cm. </P>
Conveyance: </P>
Qty/40' FCL: 40cbm
Qty/40' HQ: Overweight </P> |
|
| » Posted by: Linyi Yueyang Wood Co.,Ltd [China] |
|
|
|
|
|
[Sell]
Film Faced Plywood |
|
|
Face:black film or brown film (Dynea or StoraEnso) </P>
Core: Poplar/Pine/Birch/Combi </P>
Glue: WBP glue (Top quality phenolic resin) </P>
size: 1220mmx2440mm,1250mmx2500mm </P>
Thickness:12mm/15mm/18mm/21mm </P> |
|
| » Posted by: Linyi Yueyang Wood Co.,Ltd [China] |
|
|
|
|
|
[Sell]
Three Layer Shuttering Panel |
|
|
For construction use, the effect of the 3 layer shuttering panel is the same as film faced plywood, in various countries, constructions adopt alternative film faced plywood, shuttering plywood, or 3 layer shuttering panels. </P>
Three Layer Shuttering Panels are made of 3-plywood with a thickness of 9 mm each ply.
The 1st and the 3rd ply grain are arranged at right angles to the second ply.
Glueing is made with high temperatures and pressure.
The moisture content is less than 13%. </P>
Both sides of the panels have a melanimic protection in light yellow colour and alkaline proof and to avoid humidity. </P>
Size: 970 x 500 mm
1000 x 500 mm
1500 x 500 mm
1970 x 500 mm
2000 x 250 mm
2000 x 300 mm
2000 x 500 mm
2000 x 1000 mm
2500 x 500 mm
3000 x 500 mm. </P>
Thickness: 21mm (3 x 7mm),27mm (3 x 9mm).
Glue: WBP (MUF) / E1.
Density: 425Kgs/M3.
Material: Fir/Abisia.
Sanding: Double faced sanded and Coated. </P> |
|
| » Posted by: Linyi Yueyang Wood Co.,Ltd [China] |
|
|
|
|
|
[Sell]
Formwork H20 Timber Beam |
|
|
For construction use. Carry film faced plywood. </P>
Made of high-grade solid sawn lumber and plywood. </P>
Around 5.6-6.6 kgs per running meter. </P>
Treated by Water Proof Glue. (WBP) </P>
Prefabricated wood H20 beams are manufactured in a range of sizes. Long lengths use fingerjoining to splice flanges and butt jointing or toothed, tongue and groove or scarf configurations to splice the webs. The actual length is limited only by transportation restrictions</P>
Resistant to rough handling and extreme use with longer service life.
Weight per running meter: 5.2-5.8 kg </P>
Mechanical specification: </P>
Bending moment max.5 Kn/m </P>
Cutting action max 10.0KN </P>
Bending max1/500 </P>
Live load max 1.5 KN/m2 </P>
Length in cm </P>
180 - 190 - 245 - 290 - 330 - 360 - 390 - 450 - 490 - 590 </P> |
|
| » Posted by: Linyi Yueyang Wood Co.,Ltd [China] |
|
|
|
|
|
[Sell]
undertaking processing kinds of metallic products |
|
|
We are one of the leading company which is in the
capicity of manufacturing,processing and operating.now we are undertaking
all kinds of producets processing,designing ang manufacturing,we have the qualified staff and experts.
We can undertake all the given below items:
1.All kinds of machinery parts, bodies, ends, screw rod and nut, casting ,forging and welding.
2.Metal works (inclusive of iron works)
processing in all high-tech method ,metal works which can be used in highway,railway, bridge, construction and housing development.
3.Plastic products, knitting, printing and dyeing and we also take the order for manufacturing on your own material.
Please do not feel any hesitate to contact us for any doubt.
Wish we will have a pleasant and successful cooperation.
Contact person:Ms.Ada Li
Phone:86-412-8510377 86-412-8554528
Fax:86-412-8562503 86-412-8562501
MSN:ltt612@hotmail.com
e-mail:ltt612@hotmail.com asyingyi02@163.com |
|
| » Posted by: Anshan HongMing Metallurgical Machinery Co. Ltd. [China] |
|
|
|
|
|
[Sell]
Acid etched glass |
|
|
This is Vivi,from Qingdao Huarui Glass Products Co.,Ltd.from China.I have read your web carefully and glad to know that you are a well-reputated company ..
We are a professional manufacturer for building glass, such as acid etched glass,sandblasted glass, polished glass and so on,Our new developed HR103 non-handprint acid etched glass can be compared with the products in Italy but the lower price, which has been exported to Europe, America such as Belgium, France, Germany, Portugal, Russia, New Zealand and so on. So do please believe our professional.
Attached is a few pictures for our products for your reference.You specialize in glass and I have confidence that you can compare it with any top brand acid etched glass. You can rest assured our credit and that we can supply you the best acid etched glass with the best price from China.
If you are interested, please feel free to contact me. |
|
| » Posted by: Qingdao Harui Glass Products Co.,LTD [China] |
|
|
|
|
|
[Sell]
SELL Used Rail ISRI R50-R65, ISRI 27 |
|
|
SOFT OFFER FOR USED RAILS
Seller mandate: Reltona Trading Ltd
December ,2008
Dear Sir/Madam
We,hereby confirm that we are ready,willing and able to supply the commodity as
Per specifications and in the quantity and for the price as specified in the terms and the conditions as here in after set forth.
Commodity:Used Rail ISRI R50-R65, ISRI 27
Origin :Argentina,Central Europe,Russia or America as sellers option
QUANTITY:30,000MT per month as per agreed quantity
Minimum:30,000MT/ month x 12 months
Packaging:Loose bulk
Inspection:SGS
Destination: ASWP
Payment Terms:Unconditional SBLC+TT or FFRDLC
Pricing: CIF ASWP
Quantities minimum 30,000MT per month for yearly contract
Used RAIL= USD 290/MT CIF
Spot Deal: Used Rails R50-R65 with spot deal 30,000MT x 1
= USD 310 $/MT
Total Quantity : 4Million MT available
Payment Terms:
· UNCONDITIONAL SBLC+TT at unloading port,or
· Irrevocable,Confirmed ,Transferable,Divisible,AUTO Revolving,
· Unconditional,Clean Documentary L/C from a Top (TWENTY-FIVE)
World Bank.All payment instruments must be confirmed by a US,Western
European or Hong Kong bank.
Documents for Payment:
SBLC+TT
1)Signed commercial invoice:1 original and 2 copy.
2)Full set of Clean On Board Bills of Lading: 1 original and 2 copy.
3)Quantity certificate issued by SGS at the port of loading:1 original and 2 copy.
4)Certificate of origin:1 original and 2 copy.
5)Radioactivity Inspection :1 original and 2copy.
6)Unloading Port inspection report:1 original and 2copy.
DLC:
1)Signed Commercial Invoice:3 originals and 3 copies.
2)Full set of Clean on Board Bills Of Landing: 3 original and 2 copies
3)Packing List :3 original and 3copies.
Procedures:
1.Buyer will submit ICPO and BCL via MT 799 or MT 999 SWIFT.
2.Seller will issue FCO and Buyer sign back with ICPO with full bank detail.
3.Draft contract, Buyer &Seller agree and sign the Contract
4.BUYER VISIT THE YARD
5.Buyer opens payment instrument.
6.Seller opens 2%PB.
7.Shipment commences.
Remarks and Procedure:
1.Above prices are Net-Prices.
Any commissions or Kickbacks must be added in the overprice.
2.This is not a Full Corporate Offer(FCO). To receive an FCO and a draft contract
From us, you first need to send a valid LOI and a BCL.
BCL is not for asoft probe,
But to make sure that buyers bank agree to issue payment instruments.
BCL swift MT999 and SBLC format to be provided.
3.PB :2%
4.Delivery:1st shipment 30-60 days after receiving L/C.
5.Signed Contracts-After the contract has been signed,the buyer has 7 calendar
Days to open the bank instrument.At the end of the seventh day ,an email will be
Sent informing that the contract has been cancelled because of the buyers non performance.
6.VERY IMPORTANT INFORMATION:
-The seller never provides documents to prove our past performance
No past BL,SGS reports or Allocation letters wil be provited.
The seller accepts only the documents provided in the bank-to-bank process.
-There is no other way,but have to follow step by step as on procedures.
Aswe have signed NCND doc with the other buyer, so the past document cannot be
Given, even though with sanitized documents.
-The buyer is strictly advised to follow the procedures and payment terms specified
In soft offer.
We are real and only deal with real buyers.
-All payment instruments must be confirmed by US,Western Europe or Hong Kong
Bank.
We hope you and your buyer agree and well understanding with our procedures and
Payment terms in our soft offer,
Because our sellers procedures and payment terms cannot be changed or
Bargained anymore.
|
|
» Posted by: reltona [Greece]  |
|
|
|
|
|
[Sell]
sell COPPER |
|
|
DEAR sirs
We are mandate from COPPER Refineries
Through business circles we are given to understand that you are interested in copper cathode.We have 1000mt already refined by copper refinery in Kitwe Zambia ready for export.Due to low LME price and the world financial crisis we are ready to sell to you at our soft corporate offer LME - 15%+/- /mt, CIF any port in Asia or Europe,as we intend to establish long term business relationship together.
Procedure:Buyer visit Zambia to view the goods at refinery warehouse.<=r>
Seller arrange inspection by AHK at Kitwe before transport & shipment.
Following are the specs
Commodity: Electrolytic copp=r cathode- Non registered LME
Grade A standard cu cath-1
Puri=y: 99.99%
Dimension: 914mm x 914mm x 12mm app (36" x 36" x 1/2")<=r>
Weight each sheet: 125kg +/-
Weight each pallete: 2.2mt+/=
Weight each container: 20mt
Gross weight per container:=22.2mt +/-
Quantity: 1000mt
Country of Origin: RDC Congo=br> Price: $2..00/mt CIF
Loading port: Dar es Salaam=Tanzania
Discharge port: TO ORDER
Delivery pe=iod: 5 working days after logistics(ownership change,storage,transport etc=
Shipping terms: CIF
Payment: IRREVOCABLE NON-TRANSFERABLE DLC covering full value of shipment against AHK(A=fred Knight) inspection report at Loading port & inspection report = at port of Destination .
Contract duration: 12000mts in 12 months
=Contract Value: $2,..00,000.00 (USD Two Million.................. T=ousand only)
We hope this will be of interest to you.
Looking forwar= to your early response.
Kind regards
PLEASE ONLY SERIOUS BUYERS CONTACT ME
Thank you in advance.
With best regards,
Reltona Trading Ltd.
Melidis THOMAS
Director
TEL:0030 6949 722407 |
|
| » Posted by: reltona [Greece] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 next»
|
|
|
