|
|
|
|
|
|
|
[Sell]
Spirulina Powder |
 |
|
Color: Dark blue-green
Smell: Fresh sea-algae, without unpleasant smell
Apperence: Even powder, without impurities
Size: Passing through the size of 100 micro mesh, the rate>95% and Passing through the size of 200 micro meshes, the rate>75%
Protein: More than 60%
Moisture: <8%
Ash: <9.0%
Food of the future
Rich in antioxidants
Contain all essential amino acids
Rare food source of the essential fatty acid GLA
Provide high concentrations of amino acids, chelated minerals, rhamnose sugars (complex natural plant sugars), trace elements, enzymes - that are in an easily assimilable form.
Promotes immune health and provides antioxidant benefits
Spirulina has been recommended as an ideal healthy product for human in 21 century by FAO. The spirulina is with rich nutrition, high nutrition value and large application scope, especially in food, high effect feed, medicine and chemical as a natural protective product, also special functions for some silks.
The spiral algae widely distributes in the world various sea areas and the land pale, in the salt water lake, is nucleus biology which the float is self-supportive, is the blue-green algae oscillatoria item oscillatoria branch. The algae body as a result of assumes the green including the algae blue element, the microscope observation assumes the thin filiform helix. The world known has 36 kinds, at present on the international factorization
|
|
» Posted by: Zhongbei Northland Bio-Chem Industry Co., Ltd [China]  |
|
|
|
|
|
[Sell]
Chlorella Powder |
|
|
Specification: 55% Protein
Appearance: Deep green powder
Function:
Chlorella is a genus of unicellular green algae belongs to the Phylum Chlorophyta. It is rich in protein and rich in chlorophyll,carotenoids. It has put putative anti-carcinogenic, immunomodulatory, hypolipidemic, gastric, mucosal-protective and detoxification activities. A clorella extract has demonstrated anti-tumor and anti-metastatic effects in animal experiments. Chlorella has showed some experimental anti-atherogenic activity and some radio-protective and chemo-detoxifying effects. It has showed some preliminary benefit in immue function and in some with fibromyalgia.
|
|
| » Posted by: Zhongbei Northland Bio-Chem Industry Co., Ltd [China] |
|
|
|
|
|
[Sell]
Egg yolk lecithin |
|
|
Egg Yolk Lecithin is a kind of yellow grains or powder with special yolk flavor but without foreign flavor or extraneous material.
Physical and Chemical Standards
Water Content and Volatile Matter, % ≤ 7
Insoluble Acetone Substance, % ≥ 75
Protein, % ≥ 25
Total Phospholipids, % ≥ 40
Lecithin, % ≥ 18
Cholesterol, mg/100g ≤ 500
Acid Number, mg KOH/g, ≤ 30
Iodine Number, g/100g 60-80
Peroxide Value, meq/kg ≤ 30
|
|
| » Posted by: Zhongbei Northland Bio-Chem Industry Co., Ltd [China] |
|
|
|
|
|
[Sell]
Leucine |
|
|
Synonyms: L-2-Amino-4-methylpentanoic acid; (S)-2-Amino-4-methylpentanoic acid; L-Leu
C.A.S # : 61-90-5
Molecular Structure:
Molecular formula: C6H13NO2
Molecular weight : 131.17
Assay: 98.5%-101.5%
Quality Standards: USP30
Leucine contains not less than 98.5 percent and not more than 101.5 percent of C6H13NO2,as L-leucine,calculated on the anhydrous basis.
Characteristic: White crystals.
Melting point: 286-288°C
Sublimation: 145-148°C
alpha: 15.4° (c=4, 6N HCl)
Water solubility: Soluble in water (25 ℃, and 24.26 g / L), acetic acid (10.9 g / L), diluted hydrochloric acid, alkali and carbonate hydroxide solution, slightly soluble alcohol (0.72 g / L), do not dissolve in ether.
Function and Usage: An essential amino acid found in corns and legumes. It plays an important role in protein metabolism and is vital for growth of infants. Leucine may also promote muscle growth during recovery after prolonged exercise or after hard training sessions. It is one of the branch-chained amino acids, which can be used by muscles as an energy source. |
|
| » Posted by: Zhongbei Northland Bio-Chem Industry Co., Ltd [China] |
|
|
|
|
|
[Sell]
RTV silicone rubber for molding |
|
|
RTV silicone rubber for a large statue Buddha, furniture, sculpture, statues Buddha, artifacts copied, building decoration.
(1) RTV silicone rubber application:
RTV silicone rubber with Outstanding release properties, high mold life for casting of
primarily intended for poly resin crafts, PU crafts, PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy , stationery gifts crafts industry, , Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.
Operating steps of RTV General Use silicone rubber for Plaster,resin, cements mold
1. Deal with the original mould.
2. spary release agent evenly on the original mould
3. weigh the silicone rubber and curing agent correctly and mix them evenly
4.Deairring and air bubble eliminating handling
5.perfusion or brushing process
Features of RTV silicone rubber:
(1) Free customer service to solve technical issues in earliest time.
(2) Curing agent arrange together as free charged
(3) Very low shrinkage and good dimensional stability
(4) High elasticity, for easy removal fo complex replica parts
(5) Sample orders are available.
(6) Special produce accordingly to your request
Storage and Precautions of RTV silicone rubber
RTV2 silicone rubber, which is an environmentally-friendly liquid silicone product, is not easy to burn and can be stored and transported
as non-hazardous goods. The shelf life of the product is about one year from
the date of production. Inspection is required when exceeding the time limited.
It can continue to be used in case of neither thickening nor deterioration.
Any questions of RTV-2 silicone rubber, please feel free to contact Cassi :
TEL: 086-755-89948006
FAX: 086-755-89948030
MOBILE:086-18938867521
Website: www(dot)szrl(dot)net
E-MAIL: hyjg(at)szrl(dot)net
|
|
| » Posted by: Shenzhen Hong Ye Jie Technolog Co.,LTD [China] |
|
|
|
|
|
[Sell]
liquid silicone rubber for molding |
|
|
liquid silicone rubber for molding applications
liquid silicone rubber for molding is primarily intended for poly resin crafts, PU crafts, PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy , stationery gifts crafts industry, a large statue Buddha, furniture, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, largescale cement mold, artificial fossils Factory, Europe component factory,
simulation landscapes, animals and plants sculpture, sandstone crafts and so on.
liquid silicone rubber for molding description
liquid silicone rubber for molding is white or red flowing liquid with general hardness of 22-50 shore A after curing. tin cured silicone rubber is a kind elastic silicon rubber mold which features with resistance to deformation, high-temperature, acid-alkali and expansion as well as high reproduction times, good tensile strength, tear strength and elongation
liquid silicone rubber for molding mainly features:
a. resistance to deformation, high-temperature
b. high reproduction times
c. good tensile strength
d. exceptional fluidity
e. we provdited catalyst in free charged.
why chose liquid silicone rubber for molding
silicone rubber for art craft molding is an effective and inexpensive way to create multiple copies of a master prototype part when you need a spec-like material for multiple sets, in a short timeframe, for less than a traditional tool would cost.
liquid silicone rubber for molding are capable of reproducing remarkable detail, and because of the flexibility of silicone, draft angles, inserts, and undercuts are not as critical as in other molding processes.
FAQ of liquid silicone rubber for molding
Why should the silicone mold be reused only for a few times?
It can be due to the following reasons:
a. Adding too much silicone oil in to silicone rubber.
b. Using the silicone rubber with a high hardness to make molds for small sized products
with delicate and intricate designs .
Any questions of liquid silicone rubber for molding, please feel free to contact Cassi :
TEL: 086-755-89948006
FAX: 086-755-89948030
MOBILE:086-18938867521
Website: www(dot)szrl(dot)net
E-MAIL: hyjg(at)szrl(dot)net
|
|
| » Posted by: Shenzhen Hong Ye Jie Technolog Co.,LTD [China] |
|
|
|
|
|
[Sell]
Pad printing silicon rubber |
|
|
Brief description:
Pad printing silicone rubber:
1. resistance to deformation, high-temperature
2. high printing times
3. good aging resistance
4. exceptional elasticity
5 great printing effect
Pad Printing Silicone Rubber Usages:
Pad printing silicone rubber is mainly use for printing irregular patterns of plastic toys, electroplating toys and trade makers . Pad printing silicone rubber as a carrier which transfer patterns on the steel plate to the toys products surface.
Pad Printing Silicone Rubber Features:
Pad printing silicone rubber with high print times and abrasion resistance. Pad printing silicone rubber has good printing effects, permanent and durable. We can provide all kinds of color and our catalyst is free.
Models of pad printing silicone rubber,
NO.: HY-918
Usage: The best quality in pad printing silicone for making pads.
description: HY-918# with the advantages of abrasion resistance, high temperature resistance, good printing effect, etc.The silicon pad is a carrier which transfer printing the patterns on the steel plate onto the toy products' surface.
FAQ:Why the silicon pad can not transfer the printing pattern well?
It is normal phenomena that every two out of ten products have this problem if the plastic toys are not spray painted. As in the production process, mold release agent will be sprayed onto the surface of the steel plate for each one dozen products, and there will be some mold release agent left on the surface of the first one or two product. Please use Tianna water or face-clean water to clean the products before used for pad printing.
Any questions of Pad Printing Silicone Rubber, please feel free to contact Cassi.
Shenzhen Hong Ye Jie Technology Co.,LTD
TEL: 086-755-89948006
FAX: 086-755-89948030
MOBILE:086-18938867521
Website: www(dot)szrl(dot)net
E-MAIL: hyjg（at)szrl(dot)net |
|
| » Posted by: Shenzhen Hong Ye Jie Technolog Co.,LTD [China] |
|
|
|
|
|
[Sell]
Manual molding silicon rubber |
|
|
Manual molding silicone rubber
1. Good elasticity
2. Non-deformation
3. Heat resistance
4. Low shrinkage
a. Applications of Manual Molding Silicone Rubber
Manual Molding Silicone Rubber is mainly used for model design of manual mold, PVC plastic molds, cement products, low melting point alloy molds, alloy toys, plastic toys, electronics, handicrafts, stationery, large-scale sculpture, reproduction of cultural relic, shoe sole molds, pad printing allocation, Electronic equipment antivibration, etc.
b. Model Codes of Manual Molding Silicone Rubber
HY-528# is applicable to make molds of smaller products and the production will be 2-3 pieces.
HY-540#, compared to other two types, for its moderate hardness and better quality & performance, its production will be 20-30 pieces.
HY-570# is applicable to large size products duplications and Electronic equipment antivibration.
FAQ of manual molding silicone rubber
How to prevent silicone manual molds getting sticky?
The main reason for this problem is that you do not handle the products or original molds well, then you should deal with the original mold or products carefully before molding. Such as for the products with a complicated pattern or a unsmoothed surface, you should polish and clean the products after which it will be molded ,then spray the release agent. Normally, the release agent can be Vaseline , detergent. liquid wax Etc. In practical process, you can bush different release agent according to different material.
The second reason is that the operator pour the silicone into the mold when the mixture is mixed evenly, then the finish silicone mold will not cure and dry entirely.
Further information on Manual Molding Silicone Rubber is available. Please feel free to contact Cassi.
SHENZHEN HONG YE JIE TECHNOLOGY CO., LTD
Website: www(at)szrl(dot)net
ADD: Liulian Shibi industrial, Pingdi town, Longgang district, Shenzhen, China
Tel: 0086-0755-89948006
Mobile: 0086-18938867521
Fax: 0086-755-89948030
E-mail: hyjg(at)szrl(dot)net |
|
| » Posted by: Shenzhen Hong Ye Jie Technolog Co.,LTD [China] |
|
|
|
|
|
[Sell]
silicon rubber for mold making |
|
|
Brief description:
Pad printing silicone rubber:
1. resistance to deformation, high-temperature
2. high printing times
3. good aging resistance
4. exceptional elasticity
5 great printing effect
Pad Printing Silicone Rubber Usages:
Pad printing silicone rubber is mainly use for printing irregular patterns of plastic toys, electroplating toys and trade makers . Pad printing silicone rubber as a carrier which transfer patterns on the steel plate to the toys products surface.
Pad Printing Silicone Rubber Features:
Pad printing silicone rubber with high print times and abrasion resistance. Pad printing silicone rubber has good printing effects, permanent and durable. We can provide all kinds of color and our catalyst is free.
Models of pad printing silicone rubber,
NO.: HY-918
Usage: The best quality in pad printing silicone for making pads.
description: HY-918# with the advantages of abrasion resistance, high temperature resistance, good printing effect, etc.The silicon pad is a carrier which transfer printing the patterns on the steel plate onto the toy products' surface.
FAQ:Why the silicon pad can not transfer the printing pattern well?
It is normal phenomena that every two out of ten products have this problem if the plastic toys are not spray painted. As in the production process, mold release agent will be sprayed onto the surface of the steel plate for each one dozen products, and there will be some mold release agent left on the surface of the first one or two product. Please use Tianna water or face-clean water to clean the products before used for pad printing.
Any questions of Pad Printing Silicone Rubber, please feel free to contact Cassi.
Shenzhen Hong Ye Jie Technology Co.,LTD
TEL: 086-755-89948006
FAX: 086-755-89948030
MOBILE:086-18938867521
Website: www(dot)szrl(dot)net |
|
| » Posted by: Shenzhen Hong Ye Jie Technolog Co.,LTD [China] |
|
|
|
|
|
[Sell]
ABS |
|
|
ABS
Property
Unit
Test Method
Test Condition
AG12A0
Tensile Strength
kg/cm2
( MPa)
ASTM D-638
( ISO527)
23℃
510
(50)
Flexural Strength
kg/cm2
( MPa)
ASTM D-790
( ISO178)
23℃
750
(74)
Flexural Modulus
kg/cm2
( MPa)
ASTM D-790
( ISO178)
23℃
25000
(2450)
Rockwell
Hardness
　R-Scale
ASTM D-785
( ISO2039/2 )
23℃
R-106
Izod
Impact Strength
kg-cm/cm
( J/m )
ASTM D-256
( ISO R180 )
23℃
1/4'' bar
30
(294)
Vicat Softening
Temperature
℃
ASTM D-1525
(ISO 306)
1Kg load
103
Heat Deflection
Temperature
℃
ASTM D-648
(ISO 75/A)
Unannealed
18.6kg/cm2
( 1/2'' bar )
88
Annealed
( 80℃×8Hr )
100
Melt
Flow Index
g/10 min
ASTM D-1238
( ISO1133 )
200℃×5Kg
( 49N )
1.6
220℃×10Kg
( 98N )
17
Molding
Shrinkage
%
FCFC Method
23℃
0.4~0.7
Specific Gravity
　
ASTM D-792
( ISO1183 )
23℃/23℃
1.04
Flammability
UL-94
FILE NO.
E162823
1/16" HB
All Color
Application for Toys, Shoe heels, Clock housing, Stereo
housing, Suitcase, Plates, Refrigerator liner.
Package: 25KG PP bag or as buyer's request |
|
| » Posted by: Qingdao Volterra Plastic&Rubber Material Import & Export Ltd [China] |
|
|
|
|
|
[Sell]
PBT-polybutylece terephthalate |
|
|
PBT property data sheet
Test Items
Unit
pecification
Density
g/cm3
1.25~1.35
Melting Rang
210~230
Melting Index
g/10min
7.0~15.0
Submit strength
Mpa
≥50
Submit Elongation
5.0~10.0
Elongation at break
≥100
Hardness
≥70
Appearance
mm
3×4
Packnng
900kg
1200mm*1200mm*1000mm
25kg
800mm*500mm*200mm
Viscosity
Di/g
≥1.25
Package: 25KG PP bag or as buyer's request
|
|
| » Posted by: Qingdao Volterra Plastic&Rubber Material Import & Export Ltd [China] |
|
|
|
|
|
[Sell]
POM-Polyoxymethylene |
|
|
POM-----Polyoxymethylene
1.UL 94 HB
2.MFI: 27.0 G/10min
3.Melting point: 165
POM
Features: Low viscosity, thermal stability, the middle class mobility, generally for
use in molding.
performance of project technical data test conditions method of test test unit
water absorption 23.C 60% RH ASTM D-570 0.22%
MeltFlowRate--- ASTM D-1237 27.0 G/10min
Theproportionofthe physical properties --- ASTM D-792 1.41 ---
Mechanical properties of tensile strength 23 °C ASTM D-638 62.3 MPa
tretching the length 23 °C ASTM D-638 50%
Flexural strength 23 °C ASTM D-790 91.2 MPa
Bending modulus of 23 °C ASTM D-790 2.62 GPa
Tear strength 2mm ASTM D-732 54.9 MPa
IZODimpactstrengthofthe3.2mm ASTM D-256 54 J / m
Tensilestrength1.6mm ASTM D-1822 98 KJ/m2
Color: any color as you require
Package: standard 25 KG/BAG
|
|
| » Posted by: Qingdao Volterra Plastic&Rubber Material Import & Export Ltd [China] |
|
|
|
|
|
[Sell]
PA66 |
|
|
PA66
PA66 GF30 property data sheet
ITEM
Test method
unit
PA66 GF30
Color
Black
Proportion
1183
g/cm3
1.29
Heat resistance (continuous)
℃
120
Heat resistance (short-term)
℃
240
Melting point
℃
255
Linear thermal expansion coefficient (average 23-100°C)
m/(m.k)
50×10-6
　　　　- (average 23-150°C)
m/(m.k)
60×10-6
Flammability (UL94)
4589
HB
Water absorption (dipping into water at 23℃ for 24H)
62
%
0.39
-( dipping into water at 23℃)
62
%
5.5
Bending tensile stress/ Tensile stress off shock
527
MPa
-/100
Breaking tensile strain
527
%
5
Tensile modulus of elasticity
527
MPa
5900
Package: 25KG PP bag or as buyer's request |
|
| » Posted by: Qingdao Volterra Plastic&Rubber Material Import & Export Ltd [China] |
|
|
|
|
|
[Sell]
PET-polyethylene terephthalate |
|
|
PET (polyethylene terephthalate)
Parameter
Unit
Grade
PET 4
PET3
PET 2
PET 1
I.V.
dL/g
0.80 ± 0.020
0.820 ± 0.020
0.770 ± 0.020
0.870 ± 0.020
DEG
%
1.40 ± 0.30
1.40 ± 0.30
1.20 ± 0.30
1.10 ± 0.30
– COOH
mmol/kg
≤ 35
≤ 35
≤ 35
≤ 35
AA
ug/g
≤ 1.0
≤ 1.0
≤ 1.0
≤ 1.0
Color value
L
/
≥ 80
≥ 80
≥ 80
≥ 80
B
/
≤ 1.0
≤ 1.0
≤ 1.0
≤ 1.0
Powder
mg/kg
≤ 100
≤ 100
≤ 100
≤ 100
Melting point
°C
≥ 240
≥ 240
≥ 245
≥ 240
Density
g/cm3
1.40 ± 0.01
1.40 ± 0.01
1.40 ± 0.01
1.40 ± 0.01
Moisture
%
≤ 0.2
≤ 0.2
≤ 0.2
≤ 0.2
Ash
%
≤ 0.08
≤ 0.08
≤ 0.08
≤ 0.08
Package: 25KG PP bag or as buyer's request
|
|
| » Posted by: Qingdao Volterra Plastic&Rubber Material Import & Export Ltd [China] |
|
|
|
|
|
[Sell]
PVC RESIN |
|
|
Product: PVC RESIN
Appearance:White Flake or Blocks or Powder
Usage: It is used in the insulation material of PVC tube, panel, hard transparent
sheet, foil, disc, PVC monofilament, blow molding product, appliance insulation
material.
Type
SG1
SG2
SG3
SG4
SG5
SG6
SG7
Viscosity,ml/g(or K value)
156-144
(77-75)
143-136
(74-73)
135-127
(72-71)
1350-1250
126-119
(70-69)
1250-1150
118-107
(68-66)
1100-1000
106-96
(65-63)
950-850
95-87
(62-60)
850-750
Number of Impurity Partical max.
30
30
30
30
30
30
40
Volatiles Content%, max.
0.4
0.4
0.4
0.4
0.4
0.4
0.4
Appearing Density, g/ml, min.
0.42
0.42
0.42
0.42
0.42
0.45
0.45
Number of Grain/400cm2 max.
40
40
40
40
40
40
40
Plasticizer Absorbency Value of 100g Resin
25
25
25
22
19
16
14
Whiteness %, min
74
74
74
74
74
74
70
Water Extractant Solution Conductivity, s/m max.
0.005
0.005
0.005
Residule Chlore Thylene Content, mg/kg, max.
5
5
5
5
5
5
5
Ethylidence Chloride mg/kg max.
150
150
150
150
150
150
150
Packing: 25kg in net PP bag, 20MT in the 20'FCL |
|
| » Posted by: Qingdao Volterra Plastic&Rubber Material Import & Export Ltd [China] |
|
|
|
|
|
[Sell]
PP-Polypropylene |
|
|
PP-Polypropylene Injection Grade
Attributes: High Stiffness
Applicant: General Houseware
Properties Data Sheet
Properties
Test Method
Data
Melt Flow Rate 230∩, 2.16kg
D-1238
8.0 g/10min
Density
D-1505
0.9g/Р
Mold Shrinkage
HPC Method
1.60%
Tensile Strength at Break
D-638
350kg/Р
Ultimate Elongation
D-638
>100 %
Flexural Modulus of Elasticity
D-790
15,000 kg/Р
Hardness
D-648
115 R
IZOD Impact Strength 23∩
D-256
3.0 kg.cm/cm
Heat Resistance 130∩
Air Oven
<500 Hour
Heat Distotion 4.6kg/Р
D-648
105 ∩
PACKAGE: 25KG BAG OR AS BUYER'S REQUEST |
|
| » Posted by: Qingdao Volterra Plastic&Rubber Material Import & Export Ltd [China] |
|
|
|
|
|
[Sell]
Butyl Reclaimed Rubber |
|
|
Butyl Reclaimed Rubber
Packaging Detail: 20kg/pc,naked with calcium powder,package with white/black plastic film,woven bag,packaged by pallet
Delivery Detail: within 7-10 days after receving your deposit
Main Specification Data:
Strength Tensile:8MPA
Elongation:550
S/G:1.2
Ash content:8%
Water content:0.5%
Mooney Viscosity(ML@1+4@100°C):45
Features:
1.Good heating-resisting
2.Good acid-resisting
3.Excellent acid-base proof
4.Good weather-resisting
5. Good Damping
|
|
| » Posted by: Qingdao Volterra Plastic&Rubber Material Import & Export Ltd [China] |
|
|
|
|
|
[Sell]
Tire Reclaimed Rubber |
|
|
Tire Reclaimed Rubber
Detailed Product Description
Reclaimed Rubber from China
1.rubber 6.5-16 Mpa
2.rubber widely using
3.reclaimed rubber exporter
4.rubber Sample free
Reclaimed Rubbers Technical Index
Item Tensile strength
(Mpa) Elongation
(%) Moisture content
(%) Acetone Extracts
(%) Ash
(%) Density Mooney
Viscosity
14Mpa Reclaimed rubber 14 420 ≤1.0 ≤18 ≤10 ≤1.18 ≤95
12 Mpa Reclaimed rubber 12 400 ≤1.0 ≤18 ≤10 ≤1.18 ≤95
9.5 Mpa Reclaimed rubber 9 360 ≤1.0 ≤22 ≤10 ≤1.24 ≤80
8 Mpa Reclaimed rubber 8 330 ≤1.0 ≤25 ≤12 ≤1.26 ≤85
6.5 Mpa Reclaimed rubber 6.5 300 ≤1.2 ≤28 ≤15 ≤1.35 ≤85
4.6 Mpa Reclaimed rubber 4.6 200 ≤1.2 ≤20 ≤38 ≤2.0 ≤80
3.8 Mpa Reclaimed rubber 3.8 180 ≤1.2 ≤20 ≤30
|
|
| » Posted by: Qingdao Volterra Plastic&Rubber Material Import & Export Ltd [China] |
|
|
|
|
|
[Sell]
Natural Latex Rubber |
|
|
Natural Latex Rubber
Specifications
1. Strength:13-18MPA
2. Elongation:750%
3. Made by natural rubber scrap
4. Take the same position of natural rubber
Description:
Natural Latex reclaimed rubber is made of natural rubber scrap
from the rubber tree.In the process of crushing,desulfurization,drying,
extrusion etc,The strength of this grade can be instead of natural can reach
13-18MPA.Its widely used in various tyre,rubber tube,waterstop,convery belt,
cable,rubber sheet,etc.
Property:
High Strength Tensile;
100 % Rubber Content;
Odorless&Free-Environment
Main specification:
Strength:16-18MPA
Elongation:750-800%
Rubber content:100%
Package : 20kg/pc |
|
| » Posted by: Qingdao Volterra Plastic&Rubber Material Import & Export Ltd [China] |
|
|
|
|
|
[Sell]
Natural rubber |
|
|
Product Name: Natural rubber
Specifications: SVR3L/SVR10
Product Remarks: Natural Rubber SVR 3L
Product Category:
SYNTHETIC RUBBER
Product Description:
Product name : Vietnam natural rubber SVR 3L
SVR3L is produced from field latex.It is light color with excellent tensile.It is widely used in performance tyres, industrial rollers and other applications requiring high quality.And its adhesion performance is very good.Sometimes SVR 3L can replace TSR5 grade rubbers.
Handling Precautions:
Direct exposure to sunlight and humidity may cause discoloration or quality deterioration. Keep the product away from direct sunlight,humidity and impurities,and store in a cool place.
Specification Sheets:
Property
Limits SVR3L
(TCVN3679:2004)
Standard
(Test method)
Ditretained on 45μaperture),
(%wt)Max
0.03
TCVN 6089:2004
(ISO 249:1995)
Ash Content, (%wt)Max
0.50
TCVN 6087:2004
(ISO 247:1990)
Volatile matter, (%wt)Max
0.80
TCVN 6088:2004
(ISO 248:1991)
Nitrogen, (%wt)Max
0.60
TCVN 6092-2:2004
(ISO 2007:1991)
Initial Wallance Plasticity
(Po)Min
35
TCVN 6092-1:2004
(ISO 2930:1995)
PRI(p30/ Po)×100Min
60
TCVN 6089:2004
(ISO 249:1995)
Lovibond colour Max
6
TCVN 6093:2004
(ISO 4660:1999)
Mooney Viscosity
ML(1’+4’)100°C
-
TCVN 6090:2004
(ISO 289-1:1994)
Rheometric Cure(160°C,1° are 100rpm,ACS1)
TCVN 6094:2004
(ISO 3417:1991)
-Torque Min,(dNm)
-
- Torque Max,(dNm)
-
-Scorch Time T2(m:s)
-
-Optimum Cure Time t90, (m:s)
-
Transportation:
Packing:
33.3kgs/bale
Loading:
20MT/20FCL
Delivery time:
Within 20 days after receiving your deposite |
|
| » Posted by: Qingdao Volterra Plastic&Rubber Material Import & Export Ltd [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 next»
|
|
|
