|
|
|
|
|
|
|
[Sell]
0.4MPa,300ml/min,99.999% purity Nitrogen, Hydrogen and Air generator |
 |
|
0.4MPa,300ml/min,99.999% purity Nitrogen, Hydrogen and Air generator
1.Features:
1. It can replace traditional high pressure cylinders. N2, H2 and air are generated separately or together, intermittently or continuously. The purity of gas will not decay for long time use.
2. Easy to operate, switching power on to produce gas, regular output flow, completely automatic tracking equipment.
3. Generate nitrogen through world leading Pressure Swing Adsorption (PSA) technology, which replaces the traditional electrolyte separation technology. It is safe and convenient to operate, has no corrosion toward instrument and supplies gas for 24 hours.
4. Generate hydrogen through world leading SPE (PEM) technology. No longer need to add lye. Without alkali reversion.
5. It's powered by whole sealing silent air compressor. After purification, water, oil, dust and impurities are removed. Through pressure stable system, pure and silent air is finally produced under stable pressure.
2.Model and specification:
Model QL-NHA300
Gas Type Nitrogen Hydrogen Air
Output Flow (ml/min) 0-300 0-300 0-1000
Output Pressure (MPa) 0-0.4
Purity(%) 99.99 99.999 Three-level Purification
CO2:0.039%,Oil: 0.54ppm
Power Consumption (W) 350
Power Voltage (V) AC 220v,50-60Hz
Weight (Kg) 55
Dimension
(L×W×H mm) 460×440×460
|
|
» Posted by: Shandong Saikesaisi Hydrogen Energey Co Ltd [China]  |
|
|
|
|
|
[Sell]
Alkali,0.4 MPa,300-500ml/min Hydrogen Generator |
|
|
Alkali,0.4 MPa,300-500ml/min Hydrogen Generator
1.Features:
1.Easy to operate, safe and reliable, adding lye only for one time, only replenishing distilled water, switching power on to produce gas(available for several sets of gas chromatography)
2.Device for preventing backflow of lye.
3.Drum-shaped electrolysis cell, high-grade stainless steel 316L used as material for electrolysis cell.
4.High electrolysis efficiency. Gas purity and output flow will stay regular under continual use.
2.Model and specification:
Model SHC-300 SHC-500
Output Flow(ml/min) 0-300 0-500
Output Pressure(MPa) 0-0 .4
Overpressure Protection(MPa) 0.45
Hydrogen purity (%) More than 99.999
Power Voltage(V) AC 110/220 50-60Hz
Power (W) 150 300
Dimension(L×W×H mm) 420 ×227 × 352
Weight(Kg) 15 17
|
|
| » Posted by: Shandong Saikesaisi Hydrogen Energey Co Ltd [China] |
|
|
|
|
|
[Sell]
0.7-1 MPa,150-500ml/min,99.9999% Purity Hydrogen Generator |
|
|
0.7-1 MPa,150-500ml/min,99.9999% Purity Hydrogen Generator
QL-150B/300B/500B hydrogen generator has Max 0.7Mpa. According to market reseach, in the analysis of gas chromatography, when hydrogen output pressure is over 0.4Mpa. It will provide more stable analysis data and greater reproducibility of results.Besides, it will demonstrate its advanteage when applied to hydrogen absorbing device( such as metal hydride).We launch this kind of hydrogen generators to meet different demands of customers.
2.Features:
1.Adopt the worlds leading SPE/PEM technology to produce hydrogen by electrolyzing pure water.
2.No longer need to use dangerous and expensive hydrogen cylinders.
3.High purity hydrogen (99.999%-99.9999%), stable output flow, safe and convenient to operate, various alarm devices (overpressure alarm, water shortage alarm, water accumulated alarm).
4.Easy to operate, safe and reliable, generating hydrogen through electrolyzing pure water, switching power on to produce gas (available for several sets of gas chromatography).
5.High electrolysis efficiency. Gas purity and output flow will stay regular under continual use.
6.High reliability, easy to maintain.
7.Match with all kinds of GC.
8.No corrosion and pollution
4.Application:
3.Fuel gas and carrier gas for GC (Gas Chromatography).
2.Reaction gas for ELCD (Electrolytic Conductivity Detector).
3.Reaction gas for AED (Atomic emission detectors).
5.Model and specification:
Model QL-150B QL-300B QL-500B
Output Flow (ml/min) 0-150 0-310 0-510
Output pressure (Mpa) 0.02-0.7MPa pressure Stale output pressure.
Hydrogen purity (%) more than 99.9999
Power(W) 90 150 200
Voltage(V) AC 110/220V 50-60Hz
Dimension(L×W×H mm) 420×227×352
Required water Water resistivity is not less than 1 MOHM/cm
Weight(Kg) 15 15 15
|
|
| » Posted by: Shandong Saikesaisi Hydrogen Energey Co Ltd [China] |
|
|
|
|
|
[Sell]
0.4 MPa,150-500ml/min,99.9999% Purity SPE Hydrogen Generator |
|
|
0.4 MPa,150-500ml/min,99.9999% Purity SPE Hydrogen Generator
QL-150A/300A/500A hydrogen generator ultra hydrogen generator through phsical adsorption and chemical processing.The purity is more than 99.9999%
1.Features:
1.Adopt the worlds leading SPE/PEM technology to produce hydrogen by electrolyzing pure water.
2.No longer need to use dangerous and expensive hydrogen cylinders.
3.High purity hydrogen (99.999%-99.9999%), stable output flow, safe and convenient to operate, various alarm devices (overpressure alarm, water shortage alarm, water accumulated alarm).
4.Easy to operate, safe and reliable, generating hydrogen through electrolyzing pure water, switching power on to produce gas (available for several sets of gas chromatography).
5.High electrolysis efficiency. Gas purity and output flow will stay regular under continual use.
6.High reliability, easy to maintain.
7.Match with all kinds of GC.
8.No corrosion and pollution
3.Application:
2.Fuel gas and carrier gas for GC (Gas Chromatography).
2.Reaction gas for ELCD (Electrolytic Conductivity Detector).
3.Reaction gas for AED (Atomic emission detectors).
4.Model and specification:
Model QL-150A QL-300A QL-500A
Output Flow (ml/min) 0-150 0-310 0-510
Output pressure (Mpa) 0.02-0.4MPa pressure Stale output pressure.
Hydrogen purity (%) more than 99.9999
Power(W) 90 150 200
Voltage(V) AC 110/220V 50-60Hz
Dimension(L×W×H mm) 420×227×352
Required water Water resistivity is not less than 1 MOHM/cm
Weight(Kg) 15 15 15
|
|
| » Posted by: Shandong Saikesaisi Hydrogen Energey Co Ltd [China] |
|
|
|
|
|
[Sell]
0.7 MPa,5-34l/min,99.999% purity Hydrogen Generator |
|
|
0.7 MPa,5-34l/min,99.999% purity Hydrogen Generator
1.Features:
1.No longer need to use dangerous and expensive hydrogen cylinders.
2.Generate 99.9999% ultra pure hydrogen continuously or on demand.
3.High reliability, space saving.
4.High purity hydrogen, stable output flow, safe and convenient to operate, various alarm devices (sensor alarm, overpressure alarm, hydrogen permeation alarm, hydrogen leak alarm, water accumulated alarm, water overfall alarm, water shortage alarm, oxygen permeation alarm, water over -temperature alarm ).
5.This product can be customized to be powered by solar/wind Generator.
2.Application:
1. Power station cooling Systems.
2. Hydrogenation, restoring protection, metal smelting and heat treatment.
3. Under any circumstance that needing large and ultra pure hydrogen gas.
4. Hydrogen Stations.
3.Model and specification:
Model QL-5000 QL-10000 QL-17000 QL-22000 QL-34000
Output Flow(L/min) 0-5 0-10 0-17 0-22 0-34
Water Tank Volume(L) 15 30 60
Output Pressure(MPa) 0.05-0.4(Conventional Type)
Or 1-5(High Pressure Type)
Hydrogen Purity (%) More than 99.999
Power Voltage (V) AC 220V\380V 60HZ AC 380V 60HZ
Power Consumption(Kw) 2 4 7.2 8.8 14
Dimension(L×W×H mm) 1035×550×1100 1035×550×1500 1650×550×1900
|
|
| » Posted by: Shandong Saikesaisi Hydrogen Energey Co Ltd [China] |
|
|
|
|
|
[Sell]
0.4MPa,99.999% purity SPE hydrogen generator |
|
|
QL Series Hydrogen Generator Conventional type
1.Features:
1.Adopt the worlds leading SPE/PEM technology to produce hydrogen by electrolyzing pure water.
2.No longer need to use dangerous and expensive hydrogen cylinders.
3.High purity hydrogen (99.999%-99.9999%), stable output flow, safe and convenient to operate, various alarm devices (overpressure alarm, water shortage alarm, water accumulated alarm).
4.Easy to operate, safe and reliable, generating hydrogen through electrolyzing pure water, switching power on to produce gas (available for several sets of gas chromatography).
5.High electrolysis efficiency. Gas purity and output flow will stay regular under continual use.
6.High reliability, easy to maintain.
7.Match with all kinds of GC.
8.No corrosion and pollution
2.Application:
1.Fuel gas and carrier gas for GC (Gas Chromatography).
2.Reaction gas for ELCD (Electrolytic Conductivity Detector).
3.Reaction gas for AED (Atomic emission detectors).
3.Model and specification:
Model QL-150 QL-300 QL-500 QL-1000 QL-2000 QL-3000
Output Flow (ml/min) 0-150 0-310 0-510 0-1020 0-2020 0-3050
Output
pressure
(Mpa) 0.02-0.4MPa normal/0.02-0.7 high pressure Stale output pressure.
Hydrogen purity
(%)
More than 99.999/more than 99.9999
Power(W) 90 150 200 500 1000 1500
Voltage(V) AC 110/220V 50-60Hz
Dimension(L×W×H mm) 420×227×352 458×230×380 500×450×800
Required water Water resistivity is not less than 1 MOHM/cm
Weight(Kg) 15 15 15 20 25 25
|
|
| » Posted by: Shandong Saikesaisi Hydrogen Energey Co Ltd [China] |
|
|
|
|
|
[Sell]
Plain PC wire, Materials, Diameter, Standard, Tensile strength, and Other Key Parameter. |
|
|
Plain PC wire named smooth PC wire refers to the smooth surface treatment of steel wire, without ribs, not indented. Plain PC wire has low relaxation and high tensile strength.
Materials: Carbon steel.
Plain PC Wire Diameter: 4 / 4.5 / 4.8 / 5 / 6 / 6.25 / 7 / 8 / 9 / 10mm.
Standard: BS5896 GB/T5223-2002 ASTM A421 ASTM A881/A881M.
Tensile strength: 1570Mpa 1670Mpa 1770Mpa 1860Mpa.
Surface: smooth.
Coil weight: 0.8 to 1.5T. |
|
| » Posted by: Ledning PC Wire Factory [China] |
|
|
|
|
|
[Sell]
Motorola Symbol MC3090 Battery |
|
|
| Brand Name Motorola Symbol MC3090 Battery Model Motorola Symbol MC3090 Quality New Quality ControlTested and Available Nominal Voltage: 3.7V Rated capacity: 2740mAh / 4400mAH/ 5200mAh The product is directly from the original purchase directly, and sold to domestic and worldwide. 1: Quality Control: All products must pass the inspection of our professional QC team; 2: Delivery Time: Lead time usually within 3 days; 3: Payment Terms: T/T,Western Union, Paypal and Cash; 4: Product Warranty : 90 days, we will have good after-sales services; 5: Product Model: We can offer all kinds of spare parts for Mobile Phone, GPS,PDA,Laptop and so on; 6: Product Package: All produces will be packaged with Anti-static bag and foam box or plastic bag and foam box. If you have any questions, Please feel free to contact us,we will try our best to help you on time. We are looking forward to hearing from you all the time. |
|
| » Posted by: Wisdom Reaching Industrial(HK)Limited [China] |
|
|
|
|
|
[Sell]
Food Additive Carboxymethyl Cellulose |
|
|
| This is one kind of food grade CMC which is exported. Our company year productivity stabilizes between 12000-15000 ton, introduces " the ICP level observation entire spectrum to read plasma launch spectroscope " which German Spiker Company produces.Straight, the production food grade and the technical grade carboxymethylcellulose sodium, best-selling overseas. |
|
| » Posted by: Changzhou City Guoyu Environmental S&T Co., Ltd. [China] |
|
|
|
|
|
[Sell]
PVC,CPVC PALL RING |
|
|
PVC PALL RING is the result of the post chlorination of PVC. The level of chlorine is increased from 56-57%, up to as high as 74%, although typically most commercial CPVC resins contain 63 to 69% chlorine. This increase in chlorine level raises CPVC’s maximum operating temperature to 200°F, over PVC’s maximum operating temperature of 140°F. In terms of chemical resistance, PVC and CPVC are very similar. PVC,CPVC PALL RING, TELLERETTE PACKING is widely used in many chemical towers.
PVC CPVC PALL RING is the result of the post chlorination of PVC. The level of chlorine is increased from 56-57%, up to as high as 74%, although typically most commercial CPVC resins contain 63 to 69% chlorine. This increase in chlorine level raises CPVC’s maximum operating temperature to 200°F, over PVC’s maximum operating temperature of 140°F. In terms of chemical resistance, PVC and CPVC are very similar. PVC,CPVC PALL RING, TELLERETTE PACKING is widely used in many chemical towers. T.C.I Pall ring is Similar to: glitsch,koch glitsch,lanpac and sulzer Pall ring
Plastic materials for the production of packings for towers have recently been used in many application fields in which formerly were restricted to metals and ceramic materials.
Selection of plastic materials depends on chemical resistance, temperature stability and mechanical strength. Polypropylene has good resistance to chemicals at temperatures up to more than 100 deg.C, polypropylene is superior to polyethylene in most fields.
The basic property of Polypropylene PP - Density: 920kg/m3
Types used: Operational temperature range:
Polypropylene LTHA: up to +110 deg.C
Polypropylene glass-fiber reinforced: up to + 140 deg.C
Polypropylene alkali-proof: up to +110 deg.C
Cold-resistant : to -10 deg.C (depending on the type)
Resistant to acids like hydrochloric acid and sulfuric acid bases like caustic soda solution and causti- potash solution salt solutions like sodium chloride, ammonium chloride alcohols, ketones such as methanol, ethanol, acetone-organic acids like formic acid, acetic acid
No resistant to: strong oxidizing agents such as halogens like fluorine, chlorine, bromine halogenated hydrocarbons aromatic hydrocarbons
As to the resistance, the respective concentrations and temperatures are to be observed.
PVC CPVC Pall-Ring
Sizes
mm
Surface
m2/m3
Free Vol.
%
Number
per m3
Weight
kg/ m3
16*16*1
25*25*1.2
38*38*1.4
50*50*1.5
76*76*2.6
260
210
140
100
73
91
90
89
90
92
230000
53500
13500
6300
1930
141
82
54
51
58
Metal pall ring || PP Pall ring || PVC , CPVC Pall ring || PVDF Pall ring || PTFE pall ring || Ceramic pall ring || Improved pall ring || Hy pak |
|
| » Posted by: NIGNBO T.C.I CO;LTD [China] |
|
|
|
|
|
[Sell]
SS304 SS316L pall rings |
|
|
SS304 SS316L pall rings is one of the most common and well known random tower packings, we can make Carbon steel pall ring, SS304 pall ring, SS304L pall ring, SS316 pall ring, SS316L pall ring, Titianium pall ring, Monel pall ring, Metal Pall Ring is an industry standard design media developed from the Raschig Ring and is used widely in variety of applications. By improving the Metal pall ring geometry enables high gas and liquid transfer rates, greater capacity and lower pressure drop than standard cylindrical rings. The interior and exterior contacting surfaces of the Metal pall ring provide for an effective distribution of liquids and gasses and resist plugging, fouling and nesting.
Advantages of Metal Pall Ring:
Lower pressure drop
Good liquid / gas distribution and higher mass transfer efficiency
Versatility, easily wettable, high resistance to fouling, high temperature
High Mechanical Strength, suitable for deeper beds
High temperature resistance
Application of Metal Pall Ring:
Metal Pall Ring Packing is widely used in all kinds of separation, absorb plants, constant decompress plants, compounding ammonia plant, decarbonization , desulfuration ，separation of ethylbenzene, separation of isooctane/ methylbenzene, Absorption, Aeration, Degassing, Desorption, Distillation, Stripping, Heat Recovery, Extraction, Various separation and absorption applications at atmospheric pressure and under vacuum, where a low pressure drop is critical,H2S, NH3 & SO2 Absorption & Stripping, Steam Stripping, Quench towers, Direct contact cooling.
Absorption Aeration Degassing Desorption
Distillation Stripping Heat Recovery Extraction
Material:
Metal Pall rings are available in a wide range of materials,such as stainless steel,carbon steel,304,304L,410,316,316L,aluminum,bronze,and other alloy.
Tech data of Metal Pall Ring Packing:
Specifications
(mm) D*H*δ
(mm) Bulk number
(n/m³) Specific surface area
(m²/m³) Bulk density
(m²/m³) Void volume
(m³/m³) Dry packing factor
(m-1)
Dg16 16*16*0.5 143000 239 216 0.928 299
Dg25 25*25*0.5 55900 219 414.2 0.934 269
Dg38 38*38*0.7 13000 129 312 0.945 153
Dg50 50*50*0.8 6500 112.3 312.0 0.949 131
Dg76 76*76*1 1870 68 216 0.96 2
*Note: All of the following bulk density refer to stainless steel(AISI304) in the material thickness shown.Other wall thickness are available on request. |
|
| » Posted by: NIGNBO T.C.I CO;LTD [China] |
|
|
|
|
|
[Sell]
KYNAR PVDF Tri pack 2" |
|
|
Polyvinylidene fluoride, or polyvinylidene difluoride (PVDF) is a highly non-reactive and pure thermoplastic fluoropolymer produced by the polymerization of vinylidene difluoride.
PVDF is a specialty plastic material in the fluoropolymer family; it is used generally in applications requiring the highest purity, strength, and resistance to solvents, acids, bases and heat and low smoke generation during a fire event. Compared to other fluoropolymers, it has an easier melt process because of its relatively low melting point of around 177 °C.
KYNAR PVDF Tri pack design further prevents dry spots and compression interlock, two phenomena common to traditional packing media, both of which cause liquid and air channeling and decrease media efficiency.
Note: surface area alone does not guarantee performance. Excess surface area can impede gas/liquid contact and create higher pressure drops, thus increasing horsepower requirements and operating expense. Tri-Pack Media tower packing provides the optimum surface-to-open-area ratio for achieving best mass transfer efficiency and lowest operating costs. It is the industry standard for random dump tower packing media. Tri-Pack Media Tower Packing is available in three sizes in a variety of injection-molded resins including polypropylene, PVC, KYNAR®, Halar®, Teflon® and glass-filled polypropylene.
Physical Properties for KYNAR PVDF Tri pack :
:
Size
1 inch
1 1/4 inch
2 Inch
3 1/2 Inch
Geometric surface Area
( ft²/ft³)
85
70
48
38
Packing Factor
28
25
16
12
Void ratio
(%)
90
92
93
95
Weight
(lb/ft³)
6.2
5.6
4.2
3.3
Number/ft³
2300
N/A
380
48
|
|
| » Posted by: NIGNBO T.C.I CO;LTD [China] |
|
|
|
|
|
[Sell]
Polypropylene Tellerette 2K,Tellerette 2k,Tellerette 2R |
|
|
Polypropylene Tellerette 2K,Tellerette 2k,Tellerette 2R Tower Packing maintains good liquid distribution through packing depths in excess of 10 metres. Good initial liquid distribution is essential. Spray headers using full cone spray nozzles are recommended. Weir distributors are not recommended.B. Design of the packing supports is important.
we can make Tellerette 2K in Polypropylene, PVDF, PVC etc.
Specifications for Tellerettes.
MODEL Outer Diameter (mm) Height surface area (m2/m3) Void volume 3/m3 Dry packing factor ( m-1 )
O 25 9 269 82 488
1R 47 19 185 88 271
S 51 19 180 89 255
M 73 28 127 89 180
L 95 37 94 90 129
LL 145 48 65 95 76
2K 83.00 32 98 92 16
3K 105.00 56 72 96 9
Tellerette tower packing is a type of inert packing with the appearance of a circular-wound spiral, used to create a large surface area to increase contact between falling liquid and rising vapor; used in gas-absorption operations
Tellerette 2K || Tellerette 2R || |
|
| » Posted by: NIGNBO T.C.I CO;LTD [China] |
|
|
|
|
|
[Sell]
Scrubber Packing (TELLERETTE) |
|
|
1. Purpose
We have produced and sold successfully plastic packing TELLERETTE as used for gas scrubbing for over twenty years.
As this packing has excellent features of mass and heat transfer efficiency for gas absorption, air conditioning, etc., it has been used as packing of high corrosion resistance and low pressure drop with extensive application for Gas Absorber, Cooling Tower, Deaerator, Reactor and other gas-liquid contact systems.
Various data on equilibrium, design and materials based on a long experience in using the packing are available on request.
2. Performance
"TELLERETTE" originated from spiral shape of packing made of polyethylene under the licence from Dr. Teller in the 1960s. Since then, we have developed and improved the production method by ourselves and following kinds are available at present:
Physical Properties of TELLERETTE
NOTE: Resins applied are as enumerated below, PVDF, ETFE, PFA are applicable, too.
Fig.1 HOG TELLERETTE Type-EL
(NH3-AIR-H2O SYSTEM)
3. Characteristics
1) This form of packing is designed not to provide downward liquid flow with dead spots but large effective surface area per unit packing volume.
2) Excellent liquid distribution and uniformity are obtained, because of a large number of branching and junction, in addition to curve structure of the packing.
3) Reduction in pressure drop attained by filament-shape with large void space enables fans or blowers to require less electrical power (energy saving).
4) Packing made of synthetic resin means good chemical corrosion resistance and increased structural strength.
5) Light weight means easy handling to fill in and out.
4. Subject
Gas absorption: SO2, SO3, NH3, CO2, H2S, HCl, Cl2, HF, NOX, organic solvents
Gas stripping: NH3, CO2, O2, contaminated water by trihalomethane, water containing organic chlorine compound
Cooling: Air cooling (liquefaction) and water cooling
Chemical reaction: Black liquor oxidation and white liquor oxidation
Dehumidification: Air and water vapor in Cl2
Applications
H2SO4/Ammonium sulfate industry: SO2, SO3, NH3, Absorber, Scrubber
Soda industry: Chlorine drying tower
Iron & steel/coke industry: COG desulfurization tower, COG middle/light oil collector, gas cooling tower
Oxygen plant: Air cooling
Thermal power: Flue gas desulfurization
Chemical industry: H2S, HCl, Cl2, HF, NOX elimination, organic solvents recovery
Pulp industry: Black/white liquor oxidation
Water purification: Ammonium, trihalomethane, trichloroethylene stripping
Sewage treatment: Deodorization
|
|
| » Posted by: NIGNBO T.C.I CO;LTD [China] |
|
|
|
|
|
[Sell]
SS304,SS316, Carbon steel Intalox Saddle Ring |
|
|
The shape of SS304,SS316, Carbon steel Intalox Saddle Ring is between ring and saddle, and therefore having advantages of the two. This structure helps distribution of the liquid and increases gas channels. It has smaller resistence, larger flow rate, higher efficiency, better filling intensity and rigidity than PALL ring. It's a kind of bulky filling used most widely at present.
Intalox saddle rings are made of ss304,ss316,ss304L,ss316L,copper,carbon steel they are are widely used in:
• Desulphurization and decarburization system in compound ammonia plant
• Decompressed plant in crude oil separated plant
• All kind of separation process such as separation of methanol
• Separation of organic acid
• Absorbing or desorbing tower
Please find the technical data sheet forSS304,SS316, Carbon steel Intalox Saddle Ring in the following:
Model
Size
d×h×δ
mm
Number
n/m3
Cumulate Weight
(γP)
kg/m3 Specific Surface Area
α
m2/m3 Voidage
(ε)
m3/m3 Dry Filling Factor
(α/ε3)
m-1
DG25 25×20×0.5 119047 353 185 0.96 209.1
DG38 38×24×0.5 31654 249.6 140.4 0.968 126.6
DG50 50×28×0.8 11160 239.7 90.1 0.97 84.7
DG76 76×48×1 3320
244.7
57.6 0.97 63.1
|
|
| » Posted by: NIGNBO T.C.I CO;LTD [China] |
|
|
|
|
|
[Sell]
York 931, 422, 431, 326, 421, 333, 371 mist eliminator |
|
|
York 931, 422, 431, 326, 421, 333, 371 mist eliminator Demister Used in case of low-pressure loss is required, or when blocking-up may occur
Style and Their Feature
Style
Density kg/m3
FreeVolume %
SurfaceArea m2/m3
Products of Other Companies
Metex
York
Becoil
Knitmesh
Vico-Tex
Uop
Koch
Acs
H
80
99.0
158
Hi-Thruput
931
954
4536
160
B
511
7CA
L
120
98.5
210
422
N
144
98.2
280
Nu-Stanadrd
431
9030
280
A
911
4CA
SN
128
98.4
460
326
415
706
SL
193
97.5
375
Xtra-Dense
421
890
9033
380
C
1211
4BA
SM
300
96.2
575
SH
390
95.0
750
T
220
97.2
905
R
432
94.5
1780
Multi-Strand
333
800
W
220
97.2
428
Wound
GS
160
96.7
5000
371
STYLE FEATURES
H-Style Can permit highest vapour velocities for mist load than any other styles. Used in case of low-pressure loss is required, or when blocking-up may occur, or when the removal of larger mist or high efficiency is not required. Usually used 150 m/m thickness. As for the efficiency equivalent to SL-Style, used in 200 m/m thickness
N-Style For all round use. It has 95-99% efficiency against 8μ mist at 1-5 m/sec velocity.
SL-Style Used when high efficiency is required. Though pressure loss is increased slightly, it is considered to have 95-98% efficiency against 3μ mist at 1-6 m/sec velocity. This S-Style is especially needed when approximately 90% efficiency at 1 m/sec velocity is required.
T-Style Used when removing of approximately 2μ-3μ mist. Especially when the entrainment is 1.0 gr/m³ or less; 200 m/m to 300 m/m thickness is used.
R-Style Used for removing of every minute mist of approximately 1μ. The most efficient type for its thickness.
|
|
| » Posted by: NIGNBO T.C.I CO;LTD [China] |
|
|
|
|
|
[Sell]
Bio-Media packing |
|
|
Kaldnes bio-media is important because a delicate eco-system is naturally developing for the bacteria involved in the nitrification process. Kaldnes media provides the maximum active surface area for the bacteria to colonise, more than other types of static media. It is this process which removes harmful ammonia and nitrite from the water.
With Bio Media-MBBR-Once submerged inside the bioreactor, the Bio Media operates as non-clogging media. No channels or dead spots like in other technologies. The Bio Media optimizes protection for the biomass and makes the WWTP extremely robust and reliable.
Application: Domestic and Industrial Wastewater, Package Plants for Wastewater, Wineries, Most Organic Wastewater. Upgrade New and WWTP, Nitrification & de-nitrification.
Bio Media Makes very compact wastewater plants, robust stable operation, no backwash required, no membrane, self -cleaning media, never need to replace. Its surface area: 550 m²/m³.
Biocell filter media for fish farming, waste water treatment, filter media, fish jar,kaldnes filter media
Advantages of BIOCELL Media
• High relative surface area per cubic meter
• Lightweight zero buoyancy
• Self cleaning
• Ideal surface for biofilm to multiply
Ideal Applications
• Sewage treatment
• Aquaculture farms
• Koi filters
The technical indices of biocell:
PRODUCT NO
PE01
PE02
PE03
PE04
PE05
Diameter×Height(mm)
12×9
11×7
10×7
14×9.8
25×12
Weight per m3
(kg)
130
140
155
125
95
Number of unites per m3
666,340
1038,000
1038,700
341,000
135,300
Specific surface area(m2/m3)
>693
>845
>834
>591
>427
Color
Natural White
Material
Virgin polythene
|
|
| » Posted by: NIGNBO T.C.I CO;LTD [China] |
|
|
|
|
|
[Sell]
PTFE bellows expansion joint |
|
|
NINGBO T.C.I CO., LTD is the specialized mfg of PTFE bellows expansion joints, PTFE is a kind
of excellent material to resist strong acid or alkali conditions, the Compensation for thermal
expansion and contraction of the displacement and misalignment, to reduce the vibration of
piping system.
PTFE bellows expansion joint through special processing methods, can not be changed in the past
around the curved pipe characteristics, can be resistant to various concentrations of acid, alkali, salt.
PTFE bellows expansion joint can be used to connect the machines with lower graphite, ceramic glass pipes,
can be used for tank car, tank, container or to the reactor, discharge pipes, the pipes can be connected or
used to balance the dislocation due to weather or other causes since the pipe displacement, changing size
or to eliminate high-frequency mechanical vibration. Can be made for special occasions, tubular reactor or
heat exchanger and so on.
Specification of PTFE bellows expansion joint:
Pressure: MPa：-0.01、-0.05、0.01、0.05、0.1、0.25、0.6、1；
Size: DN80 to DN2500
Temperature: -50～150℃
Our PTFE bellows expansion joints are mainly used for chemical industries,
Medicine, food industries. |
|
| » Posted by: NIGNBO T.C.I CO;LTD [China] |
|
|
|
|
|
[Sell]
SUS316L SINGLE BELLOW EXPANSION JOINT |
|
|
Size: DN2000
Material: Connector pipe: SUS316L
Bellow: SUS316L
Thickness: 6mm thick
we can make the metallic expansion joints according to our customers'
design, or we can also design for our customers for this expansion joint.
TCI provides Stainless steel expansion joints for chemical industries or
power technologies, the stainless steel expansion joints are in high performance
multi-ply metallic bellows fabricated from Stainless steel, Inconel 625, Alloy X,
SS316 Stainless steel and other special material.
We can provide stainless steel expansion joints sizes from DN50 to DN1000,
we can also make according to customers drawings.
Third party inspection is accepted.
|
|
| » Posted by: NIGNBO T.C.I CO;LTD [China] |
|
|
|
|
|
[Sell]
SUS316L SINGLE BELLOW EXPANSION JOINT |
|
|
Size: DN2000
Material: Connector pipe: SUS316L
Bellow: SUS316L
Thickness: 6mm thick
we can make the metallic expansion joints according to our customers'
design, or we can also design for our customers for this expansion joint.
TCI provides Stainless steel expansion joints for chemical industries or
power technologies, the stainless steel expansion joints are in high performance
multi-ply metallic bellows fabricated from Stainless steel, Inconel 625, Alloy X,
SS316 Stainless steel and other special material.
We can provide stainless steel expansion joints sizes from DN50 to DN1000,
we can also make according to customers drawings.
Third party inspection is accepted.
|
|
| » Posted by: NIGNBO T.C.I CO;LTD [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 next»
|
|
|
