|
|
|
|
|
|
|
[Sell]
Supply the best quality in China Shaded-pole motor SP61 series |
 |
|
| 1. Product characteristics: the stator is made up by core steel and winding, which creates rotation magnetic field. The rotor is made up by core steel and pure aluminium bar, which generates inductive electromotive force to form inductive current and electromagnetic torque achieving conversion between electrical energy and mechanical energy. The advantages of shaded pole motor are stable and reliable, low noise level and without electro magnetic interference. 2. major application: widely used in low load starting home appliances such as ventilators, humidifiers, warm air blowers, grillers, microwave ovens, air conditioners, electric fans refrigerators and etc. 3. major technical data: (Rated voltage) (V) 100-240 (Rated frequency) (Hz) 50-60 (Input power) (W) 8-100 (current) (mA) 100-2000 (Insulation class) (class) A/E/B/F rotation speed (r/min) 800-2600(loaded) certifications UL,CUL,TUV,CCC Remarks:motor output shaft can be custom-made(Max OD φ8mm) |
|
» Posted by: FOSHAN SHUNDE HENGXING MICRO MOTOR CO.,LTD [China]  |
|
|
|
|
|
[Sell]
Supply Synchronus motor TYK50 series made in china |
|
|
| 1. Product characteristic: Series TYK50 is bi-direction permanent magnetic synchronous motor. It is combined with permanent magnetic motor and gear reduction structure. Its rotation direction and angle can be controlled. Its advantages are large output torque, low-power and low noise level. 2.Mainly applied in mechanisms requesting constant speed and automatic control system as driving engine. Widely used in control electric appliances, electric fans, air conditioners, electric grillers, curtain drawing device, electric dinning tables, electric rack system, control circuit apparatus and etc. 3. major technical data: (Rated voltage) (V) 12V-240V (Rated frequency) (Hz) 50/60Hz (Input power) (W) ≤10W (Insulation class) (class) A.E.F rotation speed (r/min) 0.8-100r/min certifications CEE.TUV.UL Remarks:motor output shaft can be custom-made(Max OD φ7mm). |
|
| » Posted by: FOSHAN SHUNDE HENGXING MICRO MOTOR CO.,LTD [China] |
|
|
|
|
|
[Sell]
TY110101 |
|
|
| Case: Stainless steel Band: Stainless steel/ Genuine leather world time LCD display EL Back Light |
|
| » Posted by: TIANYU TIMETECH COMPANY LIMITED [China] |
|
|
|
|
|
[Sell]
30W Solar Panel |
|
|
| 30W Solar Panel Features 1. high quality guarantee using (specification) high conversion efficiency(17%) crystalline silicon solar cells(Ersol,Germany) 2. high performance bypass diodes() minimize the power drop caused by shade. 3. high transmittance, low iron tempered glass; high performance EVA; a weatherproof back sheet and sandblast electrophoresis aluminum frame extend the application of modules greatly 4. 25-year limited warranty on power output and performance (see quality guarantee) 5. sealed, waterproof, multi-functional junction box gives high level of safety. 6. We can customize product to your needs.Including power and shape. Output power Dimension Working voltage Working current Open voltage Short current Peak(W) mm Vmp(V) Imp(A) Voc(V) Isc(A) 30 620*400*25 18 1.66 21.6 2.00 |
|
| » Posted by: Shenzhen Worldstar Powertech Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
tannin extract, Skype-lgberry6 |
|
|
tannin extract
vegetable extract
larch extract
Chestnut Extract
vegetable tanning agent
tanning agent larch
leather tanning agent
Larch Extract, or Hungarian Larch Extract, which is favoured to some extent by English tanners of light leathers.
Chestnut Extract. This is another comparatively recent tanning material, being obtained from the wood and bark of the tree.
Our factory locate in the virgin forest of DaXingAnLing. We can get lots of larch and chestnut from the forest. So we can produce larch extract and chestnut extract with low cost and with low prices.
If interested, please contact with me.
Amy Zhang (Sales, Miss)
DaXingAnLing Lingonberry Organic Foodstuffs
1 Lvshui Road,
Songling District,
DaXingAnLing, Heilongjiang. China
Web: http://www.lgberry.com.cn/
Email: sales6@lgberry.com.cn
MSN: lgberry6@hotmail.com
GTALK: lgberry6@gmail.com
Skype/ICQ: lgberry6 |
|
| » Posted by: Daxinganling Lingonberry Organic Foodstuff Co., Ltd [China] |
|
|
|
|
|
[Sell]
Quartz03 |
|
|
| Quartz Watch Quartz03 Case:Plastic Case back: Stainless Steel Movement:Japan Movement WR:1~5ATM |
|
| » Posted by: TIANYU TIMETECH COMPANY LIMITED [China] |
|
|
|
|
|
[Sell]
1ch passive video balun 300m distance |
|
|
| Module KD-P002C/E Spec 1CH Passive Video Frequency respons: DC-6Mhz Common-mode/Differential-mode Rejection: 15khz ?6Mhz 60dB typ Audio/data NO Power NO Impedance Coax,male BNC:75 ohm UTP(Screwless)Terminal Block or UTP RJ45 Data Connector:100 ohm Wire type One Unshielded Twisted Pair 24-16AWG(0.5-1.31mm) Per video signal:DC Loop Resistance 52 ohms per 1,000 ft(18 ohms per 100m) UTP Port Terminal Block Dimensions(mm) 32*21*15 Weigth(g) 18 Environment Temperature:-10oC~+50oC Humidity:0~95% passive video balun,1ch video balun,UTP video balun,300m video balun,cctv accessory |
|
| » Posted by: Kopda International Electronic Co., Ltd. [China] |
|
|
|
|
|
[Sell]
40W Solar Panel |
|
|
| 40W Solar Panel Features 1. high quality guarantee using (specification) high conversion efficiency(17%) crystalline silicon solar cells(Ersol,Germany) 2. high performance bypass diodes() minimize the power drop caused by shade. 3. high transmittance, low iron tempered glass; high performance EVA; a weatherproof back sheet and sandblast electrophoresis aluminum frame extend the application of modules greatly 4. 25-year limited warranty on power output and performance (see quality guarantee) 5. sealed, waterproof, multi-functional junction box gives high level of safety. 6. We can customize product to your needs.Including power and shape. Output power Dimension Working voltage Working current Open voltage Short current Peak(W) mm Vmp(V) Imp(A) Voc(V) Isc(A) 40 630*530*35 18 2.22 21.6 2.66 |
|
| » Posted by: Shenzhen Worldstar Powertech Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
60W Solar Panel |
|
|
| 60W Solar Panel Features 1. high quality guarantee using (specification) high conversion efficiency(17%) crystalline silicon solar cells(Ersol,Germany) 2. high performance bypass diodes() minimize the power drop caused by shade. 3. high transmittance, low iron tempered glass; high performance EVA; a weatherproof back sheet and sandblast electrophoresis aluminum frame extend the application of modules greatly 4. 25-year limited warranty on power output and performance (see quality guarantee) 5. sealed, waterproof, multi-functional junction box gives high level of safety. 6. We can customize product to your needs.Including power and shape. Output power Dimension Working voltage Working current Open voltage Short current Peak(W) mm Vmp(V) Imp(A) Voc(V) Isc(A) 60 765*535*35 36 1.66 43.2 1.99 |
|
| » Posted by: Shenzhen Worldstar Powertech Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
silikon |
|
|
silikon rubber description
silikon rubber are two part cold curing silicone rubbers. They consist of a base rubber and a curing agent and offer high performance for all moulding and casting applications. You are able to cast a wide variety of products from them ranging from plaster and cement through to polyester resins
silikon rubber 630#
Model
638#
Appearance
white
Mixing proportion of curing agent (%)
2%-3%
Operating time (hour 25 0C )
0.5
Curing time(hours 25 0C)
6-8
Hardness (A°)
30-32
Density ( g/cm 3 )
1.09
Viscosity (CPS 25 0C)
18000-25000
Tensile-strength(kgf /cm2 )
≥37
Tear-strength (kgf /cm )
≥26
Elongation-break(%)
≥ 500
Retractility(%)
≤0.3
The operating method of silikon rubber
1. Deal with the original mould.
2. spary release agent evenly on the original mould
3. weigh the silicone rubber and curing agent correctly and mix them evenly
4.Deairring and air bubble eliminating handling
5.perfusion or brushing process
silikon rubber Features:
A. a low cost way to make moulds
B. a mould is built using a layer process
C. more time and fairly lengthy process to make your mould
D. easy to use
E. amazing elongation to break
Interested in the items, please feel free to contact us.
www (dot) szrl (dot) net
http://wendyzhang2008(dot)diytrade(dot)com/
hyw(at)szrl(dot)net
Helenliao888(at)hotmail(dot)com
contact: Helen
Telephone:0086 755 89948019
Mobile: 0086-15889404068 |
|
| » Posted by: HONG YE JIE TECHNOLOGY CO.TLD [China] |
|
|
|
|
|
[Sell]
RTV silicone rubber |
|
|
RTV silicone rubber application:
RTV silicone rubber with Outstanding release properties, high mold life for casting of
primarily intended for poly resin crafts, PU crafts, PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy , stationery gifts crafts industry, , Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.
Datasheet of RTV silicone rubber
Model: 625# mold making silicon rubber
Appearance: white
Viscosity (cs): 17000-20000
Hardness (A): 24-26
Tensile strength(kgf/cm2 ) ≥32
Tear strength (kgf /cm):≥28
Elongation break(%):≥500
Retractility (%):≤0.2
Curing agent mixed rate (%):2-3
Operate time (min): 30
Curing time (hours): 2-4
Model: 630# mold making silicon rubber
Appearance: white
Viscosity (cs): 25000-29000
Hardness (A): 28-32
Tensile strength(kgf/cm2 ) ≥35
Tear strength (kgf /cm):≥30
Elongation break(%):≥470
Retractility (%):≤0.2
Curing agent mixed rate (%):2-3
Operate time (min): 30
Curing time (hours): 2-4
Operating steps of RTV General Use silicone rubber for Plaster,resin, cements mold
1. Deal with the original mould.
2. spary release agent evenly on the original mould
3. weigh the silicone rubber and curing agent correctly and mix them evenly
4.Deairring and air bubble eliminating handling
5.perfusion or brushing process
Features of RTV silicone rubber:
(1) Free customer service to solve technical issues in earliest time.
(2) Curing agent arrange together as free charged
(3) Very low shrinkage and good dimensional stability
(4) High elasticity, for easy removal fo complex replica parts
(5) Sample orders are available.
(6) Special produce accordingly to your request
Storage and Precautions of RTV silicone rubber
RTV2 silicone rubber, which is an environmentally-friendly liquid silicone product, is not easy to burn and can be stored and transported
as non-hazardous goods. The shelf life of the product is about one year from
the date of production. Inspection is required when exceeding the time limited.
It can continue to be used in case of neither thickening nor deterioration.
www (dot) szrl (dot) net
http://wendyzhang2008(dot)diytrade(dot)com/
hyw(at)szrl(dot)net
Helenliao888(at)hotmail(dot)com
contact: Helen
Telephone:0086 755 89948019
Mobile: 0086-15889404068
|
|
| » Posted by: HONG YE JIE TECHNOLOGY CO.TLD [China] |
|
|
|
|
|
[Sell]
Manual Mold Silicon rubber |
|
|
Manual Mold Silicon rubber
Applications of Manual Mold Silicon rubber:
Manual mold silicone rubber is mainly applicable to manual mold design, PVC plastic molds, cement product molds, melting point alloy molds, alloy toy craftworks, plastic toy craftworks, gifts and stationery, large statues, duplication of cultural relics, shoe sole mold fabrication, pad printing positioning, shock resistance for electronic equipments, etc.
Features of Manual Mold Silicon rubber:
Manual mold silicone has good elasticity, non-deformation , high temperature resistance, low shrinkage. And it is suitable for manual mold design and small duplication mold production.
Description of Manual Mold Silicon rubber :
Manual mold silicon rubber is flowing liquid with consistant quality in whatever color. It consists of two components, wherein component A is silicone rubber, and component B is curing agent or vulcanizing agent. Firstly process and prepare the model mold or the product to be duplicated, take certain amount of the silicone rubber, add 2- 3% solidifying agent, and mix evenly for use. One mold pair can be solidified and formed in 2-3 hours. The formed mold can be used repeatedly without deformation and water shrinkage and with high temperature resistance, thereby providing fast duplication of the product with a product shrinkage 2‰.
Operation Instruction for Manual Mold Silicone rubber:
1. The manual mold silicon is applied to small products or products with fine patterns. The mold for the fine detailed and small products should be made of soft silicon to protect the products from easy breaking when demoulding.
2. If large product duplication or fabrication, the mold should be made of higher hardness silicone rubber so that the products made will not deform.
Payment Terms:L/C, T/T
Port: Shenzhen
Minimum order quantity:100kg
Supply ability:8 tons/day
Deliverly Time:within 3 days after getting bank receipt
Package:25kg/drum and 200kg/drum
If you need more information about RTV silicon rubber for manual mold making, please feel free to advise about your idea, then we will follow it to recommend the most suitable silicon rubber for your products. Looking forward to hearing from you
website: www (dot) szrl (dot) net
E-mail: hyw(at)szrl(dot)net
Helenliao888(at)hotmail(dot)com
Contact: Helen
Telephone:0086 755 89948019
0086 15889404068
|
|
| » Posted by: HONG YE JIE TECHNOLOGY CO.TLD [China] |
|
|
|
|
|
[Sell]
Pad Printing Silicone Rubber |
|
|
Pad Printing Silicone Rubber
Usage for Pad Printing silicone rubber:
Pad printing silicon rubber is mainly applicable to the printing of irregular patterns on plastics toys, electroplating products, electronic toys, trademarks, artwork gifts, and stationery, etc.
Features of Pad Printing silicone rubber:
The silicon pad is a carrier which transfer printing the patterns on the steel plate onto the toy products' surface. Pad Printing silicone rubber with the advantages of abrasion resistance, high temperature resistance, good printing effect, etc. , which made of top-quality raw material due to adding American Dupont Teflon high-temperature resistance new material, is processed through high-temperature machining.
Instruction for Pad Printing silicone rubber
1． Firstly,clean the mold with detergent, and dry up the mold by a piece of cloth or an air gun and then coat the mold with a layer of release agent.
2. The normal proportion between the pad printing silicon and the silicone oil depends on the requirements of the customers. If pattern with big area to be printed, a soft silicon pad is needed and the amount of silicone oil is increased. Contrarily, if a silicon pad with high hardness is needed, the silicone oil should be added less or not . The hardness of general pad printing silicone rubber is approximate of 15A°~-25 A°.
3. General mixing proportion is as follows: add 30g silicone oil into 100g silicon with the hardness of the silicon pad being 20A°, which is suitable for the pad printing for alloy car and products with small patterns and contact areas. If a big pressure contact surface or a soft silicon pad is needed, the mixing proportion between the silicon and the silicone oil can be 100:30-100:50.
4. The amount of the curing agent and the chemical reaction with the silicon is as follows: mix 100g silicon and 50g silicone oil sufficiently and evenly, then add the curing agent which is 2%-3% of the total weight of the silicon and the silicone oil, mixing for 2-3 minutes, and then deair to remove the air bubbles . The time of deairring generally does not exceed 10 minutes. If the deairing time is too long,it may cause fast curing of the silicon and impact the quality of silicon.
Payment Terms:L/C, T/T
Port: Shenzhen
Minimum order quantity:200kg
Supply ability:8 tons/day
Deliverly Time:within 3 days after getting bank receipt
Package:25kg/drum and 200kg/drum
If you need more information about RTV silicon rubber for manual mold making, please feel free to advise about your idea, then we will follow it to recommend the most suitable silicon rubber for your products. Looking forward to hearing from you
website: www (dot) szrl (dot) net
E-mail: hyw(at)szrl(dot)net
Helenliao888(at)hotmail(dot)com
contact: Helen
Telephone:0086 755 89948019
0086 15889404068
|
|
| » Posted by: HONG YE JIE TECHNOLOGY CO.TLD [China] |
|
|
|
|
|
[Sell]
Silicon rubber for mould making |
|
|
Silicon rubber for mould making
Applications of mould making silicon rubber
Silicon rubber for mould making is mainly used for poly resin crafts, gypsum crafts, unsaturated resin crafts, lighting and candle crafts, plastic toys, stationary gifts crafts industry, a large statue Buddha, large-scale cement mold, aninamls and plants sculpture, relievo furniture, cultural relic product, etc.
Features of molding silicon rubber:
Silicon rubber for mold making with general hardness of 22-55 A0 after curing. Molding silicon rubber is a kind of flowing liquid which features with good resistance to deformation, good tensile and tear strength, acid-alkali as well as high reproduction times, good flowability and easy operation.
Instruction for molding silicon rubber
If customer wants to make large products and large size molds, the mold should be made of silicon rubber with high hardness. On the contrary, if the mold with dedicate and precision patterns, it should make of silicon rubber with low hardness. The mixing ratio between the silicon rubber and the curing agent depents on the customers’ requirement. If clients needs fast drying and demold, more curing agent will be added; contrarily, if molds requiring slower drying and demould, less curing agent is needed.
(Note: our company does not recommend you to add silicon oil, if a special soft silicon mold or fine or dedicate pattern products are required, 5%-10% silicon oil can be added to soften the mold for easy demould)
Frequently asked questions of mold making silicon rubber
1. Why should the silicone mold be reused only for a few times?
It can be due to the following reasons:
a. Adding too much silicone oil in to silicon rubber. Silicon oil is an additive which destroies the molecular weight of silicone rubber and reduce the tension and tear strength.
b. Using the silicon rubber with a high hardness to make molds for small sized products with delicate and intricate designs and the silicon rubber with a low hardness to makes molds for large sized products with simple designs.
(Notes: we should choose the silicon rubber specifically according to the requirements of our products to avoid this problem.)
2. Why is the appearance of the finished mold striate and unsmooth?
It is because the appearance of the product or the model itself is not perfect, and it has not been polished before the further operation. So when you make silicon molds, firstly you should polish the product, spray the mold spray evenly on the product. In this case, the problem can be avoided.
Payment Terms:L/C, T/T
Port: Shenzhen
Minimum order quantity:200kg
Supply ability:8 tons/day
Deliverly Time:within 3 days after getting your payment
Package:25kg/drum and 200kg/drum
If you need more information about RTV silicon rubber for mold making, please feel free to advise about your idea, then we will follow it to recommend the most suitable silicon rubber for your products. Looking forward to hearing from you
website: www (dot) szrl (dot) net
E-mail: hyw(at)szrl(dot)net
Helenliao888(at)hotmail(dot)com
Contact: Helen
Telephone:0086 755 89948019
0086 15889404068
|
|
| » Posted by: HONG YE JIE TECHNOLOGY CO.TLD [China] |
|
|
|
|
|
[Sell]
RTV 625# equivalent to 3481# |
|
|
Application of RTV 625#
RTV 625# for molding making are used for mold duplication and delicate mold making for poli crafts,resin crafts lighting and candle crafts, plaster, cements and so on.
The operating method of RTV 625# mould making
1. Deal with the original mould.
2. spary release agent evenly on the original mould
3. weigh the silicone rubber and curing agent correctly and mix them evenly
4.Deairring and air bubble eliminating handling
5.perfusion or brushing process
RTV 625# datasheet
Item 625
viscosity(CS) 15000-18000
Hardness shore A 25
Tensile-tstrength (kgf/cm2) 35
Tear-strength(kgf/cm) 26
elongation: (%) 400-420%
shrinkage: (% 0.3%
Features of RTV 625# silicon:
(1) Silicon rubber for pad printing with SGS and ROSH approval
(2) Curing agent arrange together as free charged
(3) In liquid form and in various colors
(4) With an exceptional fluidity and good operability.
(5)Temperature and deformation resistance as well as low shrinkage.
(6) High duplication times.
(7) Sample orders are available
(8) MOQ: 200KG
Frequently asked questions about RTV mould making silicon
Why does the mold making silicone rubber mold have few molding times?
1.adding too much silicone oil which will destroy the molecular of silicone rubber;
2.Making the mold for small and detailed patterns products with higher hardness silicone rubber which is easy to break;
Making the mold for large and simple products with soft silicone rubber which will reduce the tensile and tear strength of the mold, and the mold will have deformation.
Thus, we should take the proper silicone rubber to make the mold for suitable products.
If you have meet any problem with the mould now, please feel free to contact us, hope we can do something fo you and your company, or you want to learn how to make silicon mould, we will offer professional technology information for your reference
www (dot) szrl (dot) net
http://wendyzhang2008(dot)diytrade(dot)com/
hyw(at)szrl(dot)net
Helenliao888(at)hotmail(dot)com
contact: Helen
Telephone:0086 755 89948019
Mobile: 0086-15889404068 |
|
| » Posted by: HONG YE JIE TECHNOLOGY CO.TLD [China] |
|
|
|
|
|
[Sell]
uf resin |
|
|
Urea Formaledhyde Resin powder is kind of dewatered white powder, made of Urea and Formaldehyde,have the same chemical and physical properties as those of liquid resin.
urea-formaldehyde adhesive with modified nature has these characteristics : low free formaldehyde content , high-strength , water-proof.
|
|
| » Posted by: Jinan xinxing blowing agent co.ltd. [China] |
|
|
|
|
|
[Sell]
dpt blowing agent |
|
|
DPT blowing agent(N,N´-Dinitrosopentame-thylenetetramine) is mainly used in the industry of rubber products and PVC plastic products as the vesicant.
The dosage in the rubber and plastics industry is 3-5% and 5-15%. It is a kind of light yellowy powder with no odor, but there is odor of formaldehyde when it is moist. This product is inflammable and it is burning in acid or acid fog.
This product is hardly dissolved in aether, slightly dissolved in water, alcohol, and the chloroform. It can be dissolved in acetone, butanone, acetyl, acetic acid, ethyl ester and dimethylformamide.
Specifications : in accordance with ministerial standards: HG2-1188-78.
We are exporting DPT to Few countries like Pakistan ,Nepal, Bangladesh, , Indonesia ,Thailand,Sri Lanka, Iran, Bahrain,Saudi Arabia and UAE. |
|
| » Posted by: Jinan xinxing blowing agent co.ltd. [China] |
|
|
|
|
|
[Sell]
hexamine |
|
|
HEXAMETHYLENETETRAMINE (HEXAMINE) is a white crystalline powder with slight amine odor.
Applications: Vulcanizing agent and rubber blowing agent,used as a dye fixative and in the preservation of hides、Smokeless pellets. Stabilizer for oils and synthetic resin、 Surface treatment,Vulcanizing rubber. Additives in deodorizing powder. Anti-corrosive agent in steel. Absorption of poisonous gases. Anti-caking agent for prilled urea. Disinfectant. Antibacterial agent. Explosives (RDX), (HMX), (HMTA).
|
|
| » Posted by: Jinan xinxing blowing agent co.ltd. [China] |
|
|
|
|
|
[Sell]
2V3000Ah Lead Acid Battery |
|
|
| 2V3000Ah Lead Acid Battery Safety and Sealed No eletrolyte leakage will occur from terminals or case or case of any Jackpower Battery ensuring safe and efficient operation. Maintenance-Free operation There is no need to add water thanks to unique gas recombination system which totally transforms the generated gas into water. Jackpower batteries do not need the equalizing charge As a result of monomer battery's interface resistance capacity and float voltage uniformity are fine. No Free Acid The special eletrolyte retentive separators bold the acid and thus there is no free acid inside the battery,and thererfore the battery can be mounted in any position. Long life Design The use of heavy -duty lead-calcium alloy grids with anti-corrosive construction enables the Jackpower AGM battery to remain in float service for 10-15 years;the GEL battery to remain in float service for 15-20 years.The cycle life can be more than 1000 cycles High Reliability and stable quality With advancing AGM and GEL production technology and strictly quality control system,the battery quality is stable and the battery performence is reliable.The voltage,capacity and seal are 100% tested on line. Self-discharge The self discharge rate in room temperature is approximately 2% of nominal Capacity per month. Operating temperature The Jackpower Battery can be operated between -40C to +65C.The battery can give out over40% fo nominal capacity at -40C. International standardproducts All of Jackpower battery meets the IEC standard,JIS standard.Earo Bat standard.BS standard and GB standard. |
|
| » Posted by: Shenzhen Worldstar Powertech Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
Piezo Transducer manufacturer in china |
|
|
| TYPE (UNIT) MSPT14B40S05 Min. Sound Output at 10cm (dB) 75 Rated Voltage (Vp-p) 5 Operating Voltage (Vp-p) 1~20 Resonant Frequency (Hz) 4000+/-500 Max. Current Consumption (mA) 2 Capacitance at 1,000HZ (pF) 12000+/-30% Operating Temperature (C) -20~+70 Storage Temperature (C) -30~+80 Weight (g) 0.9 |
|
| » Posted by: Changzhou Manorshi Electronics Co.Ltd. [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 next»
|
|
|
