|
|
|
|
|
[Sell]
Two Component Molding Silicone Rubber(HY-638#) |
 |
|
Two Component Molding Silicone Rubber(HY-638#)
Introduction of Two Component Molding Silicone Rubber(HY-638#):
1. Two Component Molding Silicone Rubber(HY-638#): flowable liquid silicon and catalyst.
2. Two Component Molding Silicone Rubber(HY-638#) Cures at room temperature within 4-6 hours.
FEATURES of Two Component Molding Silicone Rubber(HY-638#):
1. Two Component Molding Silicone Rubber(HY-638#) has An exceptional fluidity and good operability.
2. Two Component Molding Silicone Rubber(HY-638#) has good Temperature and deformation resistance as well as low shrinkage.
3. Two Component Molding Silicone Rubber(HY-638#) has High duplication times.
Operations for Two Component Molding Silicone Rubber(HY-638#):
Step 1 to use Two Component Molding Silicone Rubber(HY-638#):
Take 100g of part A and add 2g of part B and mix the silicon rubber and the curing agent evenly.
Step 2 to use Two Component Molding Silicone Rubber(HY-638#): vacuum pumping
Without exception, this takes less than 10 minutes. Otherwise, it will cause cross linking reaction, and no more further steps will be available.
Step 3 to use Two Component Molding Silicone Rubber(HY-638#): Brushing cast & Perfusion Molding operation.
If you are interested any more information about Two Component Molding Silicone Rubber(HY-638#), PLS feel free to contact Miss Eileen CHEN.
Tel: 0086-755-89948294
Mobile: 0086-13724229791
E-mail, eileen (at) szrl (dot) net |
|
» Posted by: Shenzhen Hong Ye Jie Technology Co., Ltd. [China]  |
|
|
|
|
|
[Sell]
Sculpture Arts Casting with RTV liquid silicone rubber is used for |
|
|
Sculpture Arts Casting with RTV liquid silicone rubber is used for
- Unsaturated polyester resins, epoxy resins, polyurethane resins
- Polyurethane elastomers
- Natural and synthetic waxes, candle, soap
- Plasters, gypsum, column, cornices, domes, cements, concrete
- Low-melting point toys
- Imitation wood and bench
Advantages of Sculpture Arts Casting with RTV liquid silicone rubber
A. Shore A from 15 to 40 hardness after curing
B. Moderate viscosity, easy-operation
C. Excellent mechanical properties, in particular tear strength and tensile strength.
D. Excellent flexibility and it is easy to demould
E. High temperature resistance, high duplication times and repeated use
F. Range of catalysts allows the Sculpture Arts Casting with RTV liquid silicone rubber to fulfill requirements for various applications and using habit
Operation Instructions of Sculpture Arts Casting with RTV liquid silicone rubber:
1. Weigh a certain amount of silicone rubber, and then add curing agent by 2%-3% of silicone rubber. Ensure that all the silicone rubber is used in short time.
2. Fully and Evenly stirring the silicone rubber, then put them in vacuum and pump 3-5 minutes
3. Curing speed is closely related to the temperature and humidity, the higher the temperature and humidity, the faster the curing.
(Customers can choose curing agent or adjust the amount of curing agent in order to reach appropriate curing speed according to the weather.)
How to choose the right Sculpture Arts Casting with RTV liquid silicone rubber
1) The small size products with fine and precision patterns, you should choose soft silicone, with hardness at about 18 to 23 shore A for easy demoulding
2) Large size products, you should shoose hard silicone, with hardness at about 35 to 40 shore A, then the mold will not deformation.
As a direct professional manufacturer of Sculpture Arts Casting with RTV liquid silicone rubber, our Hong Ye Silicone Rubber Company could not only offer you with the best silicone rubber, but also free technique support on the silicone rubber application sollutions, including silicone mold making teaching courses, products making applications, etc.
Any further information about our Sculpture Arts Casting with RTV liquid silicone rubber, please feel free to contact Ms. Eileen CHEN
TEL: 0086-755-89948294
MOBILE: 0086-13724229791
E-mail, eileen(at)szrl(dot)net |
|
| » Posted by: Shenzhen Hong Ye Jie Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
mold making silicone rubber |
|
|
A,mold making silicone rubber applications
mold making silicone rubber is mainly used for large product silicone rubber mold making, such as crafts industry, statue Buddha, relievo furniture, decorative materials, artifacts copied, building decorations, scale cement, artificial fossils, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.
B，mold making silicond rubber features:
a).Good fluidity
c).Light viscosity
c).Good characteristics of easy operation
d) Low shrinkage
e) Favorable tension
f) No deformation
g) Favorable hardenss
h).High-temperature resistance,acid and alkali resistance and ageing resistance.
C,silicone rubber descriptions:
mold making silicon rubber and silicone rubber are general called two-component room temperature
vulcanization silicone rubber with excellent fluidity and good operational performance. an elastic silicon mold will be obtained with resistance to deformation, high-temperature, acid and alkali and expansion.
Any further information about mold making silicon rubber required, pls feel free to contact Miss Jenny
Tel: 0086-755-89948294
Fax: 0086-755-89948030
Mobile：0086-15820418604
E-mail: Jenny102512(at)gmail(dot)com
Welcome to visit www(dot)szrl(dot)net anytime to find your desired products.
Warm tips:
The amount of the curing agent depends on the actual requirements of the customer. If silicon rubber molds require fast drying and demould, more curing agent is needed; contrarily, if silicon rubber molds requiring slower drying and demould, less curing agent is needed.
|
|
| » Posted by: SHENZHEN HONG YE JIE TECHNOLOGY CO.,LTD [China] |
|
|
|
|
|
[Sell]
manual mold silicone rubber |
|
|
A:Applications of manual mold making silicone rubber
a) PVC plastic manual mold design
b) Cement product manual mold design
c) Melting point alloy manual mold design
d) Manual mold design for crafts as alloy toy craftworks, plastic toy craftworks etc.
e) Gifts and stationery
f) Large statues, duplication of cultural relics
g）Shoe sole mold fabrication
h) pad printing allocation
j)electronic equipment antivibration.ect
2,Description of manual mold making silicone rubber:
Manual mold making silicone rubber is a flowable liquid silicone rubber and it contains two parts: silicone rubber and catalyst. (the catalyst is free)
3,Features of manual mold making silicone:
Manual mold silicone has good elasticity, non-deformation, high temperature resistance, low shrinkage. And it is suitable for manual mold design and small duplication mold production
Any further information required, pls feel free to contact Miss Jenny
Tel: 0086-755-89948294
Fax: 0086-755-89948030
Mobile：0086-15820418604
E-mail:Jenny102512(at)gmail(dot)com
Welcome to visit www(dot)szrl(dot)net anytime to find your desired products.
|
|
| » Posted by: SHENZHEN HONG YE JIE TECHNOLOGY CO.,LTD [China] |
|
|
|
|
|
[Sell]
pad printing silicone rubber |
|
|
1,Applications for pad printing Silicone rubber
The silicone rubber for pad printing is mainly applicable to make silicone rubber printing pad for plastics toys, electroplating products, electronic toys, trademarks and other products with irregular pattern.
silicone rubber for pad printing is white flowing liquid silicone rubber. The silicon rubber pad is a carrier which printing the patterns from the steel plate onto the toy products' surface.
2,Features for pad printing silicone rubber:
The silicone rubber for pad printing has the advantages of good printing effects, fine quality, good resilience and without any impurity,and the silicone rubber for pad printing price is reasonable.All kinds of colors are available and our catalyst is free charged.
3,Operation instructions of pad printing silicone rubber:
silicone rubber for pad printing is two-component silicone rubber, part A is liquid silicone rubber ,part B is catalyst .The usual mixing ratio for silicone rubber for pad printing and catalyst is 100:2-3,eg,we take 100 grams of liquid silicone rubber for pad printing, then we add 2-3 grams catalyst, and mix them evenly and pour it to your mold .Then after 2-4 hours , you will obtain a silicone rubber printing pad.
Warm tips: (Notes of using silicone rubber for pad printing:
The larger the pattern is, the softer the silicone rubber printing pad should be, and more silicone oil needs to add, if a silicone rubber pad with high hardness needed, silicone oil should be added less or none. General hardness of the silicone rubber printing pad is 15 Ao ~25 Ao .)
Any further information of silicone rubber for pad printing required, please feel free to contact Miss Jenny
Tel: 0086-755-89948294
Fax: 0086-755-89948030
Mobile：0086-15820418604
E-mail:Jenny102512(at)gmail(dot)com
Welcome to visit www(dot)szrl(dot)net anytime to find your desired products.
|
|
| » Posted by: SHENZHEN HONG YE JIE TECHNOLOGY CO.,LTD [China] |
|
|
|
|
|
[Sell]
Testosterone base |
|
|
CAS#: 58-22-0
M.W.: 288.42
Purity : 99%min
Appearance: white crystalline powder
Application : Pharmaceutical Intermediates
|
|
| » Posted by: Wuhan Hezhong Bio-Chemical Manufature Co.,Ltd sales department [China] |
|
|
|
|
|
[Sell]
Sildenafil |
|
|
5-[2-Ethoxy-5-(4-methylpiperazin-1-yl-sulphonyl)phenyl]-1-methyl-3-n-propyl-1,6-dihydro-7H-pyrazol[4,3d]pyrimidin-7-one
Molecular Formula C22H30N6O4S
Molecular Weight 474.58
CAS Registry Number 139755-83-2
|
|
| » Posted by: Wuhan Hezhong Bio-Chemical Manufature Co.,Ltd sales department [China] |
|
|
|
|
|
[Sell]
Oxymetholone |
|
|
CAS No.: 434-07-1
Moleular formula :C 21 H 32 O 3
Appearance :white or almost white crystalline powder
Standard :USP30/BP2003
|
|
| » Posted by: Wuhan Hezhong Bio-Chemical Manufature Co.,Ltd sales department [China] |
|
|
|
|
|
[Sell]
Oxandrolone |
|
|
Other Name: 17beta-Hydroxy-17-methyl-2-oxa-5alpha-androstan-3-one
CAS: 53-39-4
Molecular Formula: C19H30O3
Molecular Weight: 306.44
Type: API
|
|
| » Posted by: Wuhan Hezhong Bio-Chemical Manufature Co.,Ltd sales department [China] |
|
|
|
|
|
[Sell]
Clomifene citrate |
|
|
Molecular formula: C32H36ClNO8
CAS# 50-41-9
Description: White almost White crystalline powder
Specification: Enterprise Standard
Standard: Enterprise Standard
|
|
| » Posted by: Wuhan Hezhong Bio-Chemical Manufature Co.,Ltd sales department [China] |
|
|
|
|
|
[Sell]
Cialis |
|
|
Molecular formula: C22H19N3O4
CAS# 171596-29-5
Description: White almost White crystalline powder
Specification: Enterprise Standard
Standard: Enterprise Standard
|
|
| » Posted by: Wuhan Hezhong Bio-Chemical Manufature Co.,Ltd sales department [China] |
|
|
|
|
|
[Sell]
Nandrolone Propionate |
|
|
CAS#: 7207-92-3
Molecular formula : C21H30O3
M.W.: 330.46
EINECS : 230-587-0
|
|
| » Posted by: Wuhan Hezhong Bio-Chemical Manufature Co.,Ltd sales department [China] |
|
|
|
|
|
[Sell]
Nandrolone Decanoate |
|
|
CAS#: 360-70-3
Molecular formula: C28H44O3
Molecular weight: 428.65
Appearance : white to off-white power
Purity : 99%min
|
|
| » Posted by: Wuhan Hezhong Bio-Chemical Manufature Co.,Ltd sales department [China] |
|
|
|
|
|
[Sell]
Nandrolone Cypionate |
|
|
CAS: 601-63-8
Molecular formula: C26H38O3
Appearance: white crystalline powder
|
|
| » Posted by: Wuhan Hezhong Bio-Chemical Manufature Co.,Ltd sales department [China] |
|
|
|
|
|
[Sell]
Methyltestosterone (17alpha) |
|
|
CAS#: 58-18-4
M.W.: 302.45
|
|
| » Posted by: Wuhan Hezhong Bio-Chemical Manufature Co.,Ltd sales department [China] |
|
|
|
|
|
[Sell]
Methenolone enanthate |
|
|
Other name : 17b-Hydroxy-1-methyl-5alpha-androst-1-en-3-one acetate
Molecular formula: C27H42O3
CAS# : 303-42-4
Description: White almost White crystalline powder
Specification: Enterprise Standard
Standard: Enterprise Standard
|
|
| » Posted by: Wuhan Hezhong Bio-Chemical Manufature Co.,Ltd sales department [China] |
|
|
|
|
|
[Sell]
Methenolone acetate |
|
|
Other name : 17b-Hydroxy-1-methyl-5alpha-androst-1-en-3-one acetate
Molecular formula: C22H32O3
CAS# : 434-05-9
Description: White almost White crystalline powder
Specification: Enterprise Standard
Standard: Enterprise Standard
|
|
| » Posted by: Wuhan Hezhong Bio-Chemical Manufature Co.,Ltd sales department [China] |
|
|
|
|
|
[Sell]
Methandrostenolone |
|
|
Other Name : Dianabol, methandienone
Molecular Formula: C20H28O2
Molecular Weight: 300.44
CAS Number: 72-63-9
EINECS Number: 200-787-2
|
|
| » Posted by: Wuhan Hezhong Bio-Chemical Manufature Co.,Ltd sales department [China] |
|
|
|
|
|
[Sell]
Megestrol acetate |
|
|
Cas : 595-33-5
Pruity : 99%
EINECS RN : 209-864-5
Standard : USP31 EP6.o BP2007
Type : Pharmaceutical intermediate/Intermediate
Appearance : White crystalline powder
Identification : Conforms
Properties : Melting point 214
Hazardous Code : R40 ; R48
Security : S22; S24/25
Used for : intermediate
|
|
| » Posted by: Wuhan Hezhong Bio-Chemical Manufature Co.,Ltd sales department [China] |
|
|
|
|
|
[Sell]
DHEA (Dehydroepiandrosterone, Prasterone) |
|
|
Other names:DHEA; Prasterone; Androstenolone; Dehydroisoandrosterone;
trans-Dehydroandrosterone; Hydroxyandrost-5-en-17-one
CAS#: 53-43-0
Molecular formula: C22H28O4
Molecular weight: 288.42
Appearance:white powder or crystalline powder
Usage: Hormone/Steroid Intermediate
|
|
| » Posted by: Wuhan Hezhong Bio-Chemical Manufature Co.,Ltd sales department [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 next»
|
|
