|
|
|
|
|
|
|
[Sell]
Shoe mold silicone rubber |
 |
|
Shoe mold silicone rubber
A. mainly used for shoe soles mold making
B. Two-component silicone rubber with tin-catalyst
C. Cured under room temperature
D. low shrinkage
E. excellent flexibility and easy demould
Shoe mold silicone rubber applications
Shoe mold silicone rubber is mainly used for shoe molds, sand casting, sole sampling, plaster models, simple products, products with non-complex patterns, as well as product models with stable size and non-deformation.
Shoe Mold Silicone Rubber features:
A. Two-component silicone rubber with tin-catalyst
B. Cured under room temperature
C. low shrinkage
D. excellent flexibility and easy demould
Shoe Mold Silicone Rubber Using Instruction:
The component A of shoe Mold Silicone Rubber is white flowing liquid and the component B is the curing agent. For example, take silicone rubber of 100g and add 2% curing agent for mixing evenly. After the silicone rubber and the curing agent are completely mixed, put the silicon into a vacuum machine for desiring to remove the bubbles. After desired, pouring the liquid silicone rubber into the product to be duplicated or into the mold frame.
Notes:
Shoe mold silicone rubber is used for pouring or brushing technique. That is to say, fix the product or sole model to be duplicated onto a plane plate, then enclose the plane frame with wooden plates to prevent the leakage of the silicone, mix the silicone rubber and the curing agent evenly according to the mixing ratio of 100 : 2 and pour them onto the sole model, then brush evenly with a wooden plate or a brush, and fill up the mold frame with gypsum after the silicone rubber is dried.
|
|
» Posted by: Shenzhen Hong Ye Jie Technology Co., Ltd. [China]  |
|
|
|
|
|
[Sell]
Mold making silicone rubber |
|
|
Brief description:
Mold making silicone rubber:
1. Resistance to deformation, high-temperature
2. High reproduction times
3. Good tensile strength
4. Exceptional fluidity and good operability.
Detailed description:
Mold making silicone rubber
Mold making silicone rubber applications
Mold making silicone rubber is primarily intended for poly resin crafts, PU crafts, PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy , stationery gifts crafts industry, a large statue Buddha, furniture, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.
Mold making silicone rubber description
Mold making silicone rubber is white or red flowing liquid with general hardness of 22-50A°after curing. Molding silicon rubber is a kind elastic silicon rubber mold which features with resistance to deformation, high-temperature, acid-alkali and expansion as well as high reproduction times, good tensile strength, tear strength and elongation.
Frequently asked questions of silicone rubber for mold making
Why does the silicone rubber mold have few molding times?
The silicone rubber mold has few molding times is due to follwoing reasons: adding too much silicone oil which will destroy the molecular of silicone rubber; making the mold for small and fine detailed products with higher hardness silicone rubber which is easy to break; making the mold for large products with soft silicone rubber which will reduce the tensile and tear strength of the mold, and the mold will have deformation. Thus, we should take the proper silicone rubber to make the mold for suitable products.
|
|
| » Posted by: Shenzhen Hong Ye Jie Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
manual molding silicone |
|
|
Brief Description/Features of Manual Molding Silicone Rubber
Manual molding silicone rubber
1. Good elasticity
2. Non-deformation
3. Heat resistance
4. Low shrinkage
a. Applications of Manual Molding Silicone Rubber
Manual Molding Silicone Rubber is mainly u, sed for model design of manual mold, PVC plastic molds, cement products, low melting point alloy moldsalloy toys, plastic toys, electronics, handicrafts, stationery, large-scale sculpture, reproduction of cultural relic, shoe sole molds, pad printing allocation, Electronic equipment ant vibration, etc.
b. Model Codes of Manual Molding Silicone Rubber
HY-528# is applicable to make molds of smaller products and the production will be 2-3 pieces.
HY-540#, compared to other two types, for its moderate hardness and better quality & performance, its production will be 20-30 pieces.
HY-570# is applicable to large size products duplications and Electronic equipment ant vibration.
c. Operation Instructions for Manual Molding Silicone Rubber
RTV-2 Manual Molding Silicone Rubber is a flow able liquid, and the quality has nothing to do with the color. It consists of two commonest. Part A is a flow able liquid silicone rubber, part B is the curing agent. Firstly, after your previous work of dealing with the original model, take some liquid silicone rubber , add 2%-3% curing agent of the amount of silicon, and mix them evenly. Then after vacuum-pumping the mixture, you can pour it into the mold frame. The silicone mold will cured in 2-3 hours.
Note: The time for vacuum-pumping should be less than 3 to 5 minutes, otherwise, once the silicone rubber has cross-link reaction during vacuum zing, it will not be operated.
FAQ of manual molding silicone rubber –
How to prevent silicone manual molds getting sticky?
The main reason for this problem is that you do not handle the products or original molds well, and then you should deal with the original mold or products carefully before molding. Such as for the products with a complicated pattern or an unsmoothed surface, you should polish and clean the products, after which it will be molded, then spray the release agent. Normally, the release agent can be Vaseline, detergent, liquid wax, etc. In practical process, you can bush different release agent according to different material.
The second reason is that the operator pours the silicone into the mold when the mixture is mixed evenly, then the finish silicone mold will not cure and dry entirely.
|
|
| » Posted by: Shenzhen Hong Ye Jie Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
PTC FAN HEATER,mini fan heater |
|
|
| PTC heating element 2 heat settings:750W/1500W Adjustable thermostat Overheating protection Safety thermal fuse built in 5 colors optional. 6pcs/CTN CTN SIZE: 570*270*423mm 20pcs - 2490pcs 40pcs - 5256pcs 40'HQ/pcs - 6180pcs |
|
| » Posted by: Heat Expert Technology Haishu Ningbo Co.,LTD [China] |
|
|
|
|
|
[Sell]
PTC FAN HEATER,mini fan heater |
|
|
| PTC heating element 2 heat settings:750W/1500W Overheating protection Safety thermal fuse built in Power indicator light 6pcs/CTN CTN SIZE: 537*282*433mm 20pcs - 2472pcs 40pcs - 5220pcs 40'HQ/pcs - 6132pcs 4 colors optional. |
|
| » Posted by: Heat Expert Technology Haishu Ningbo Co.,LTD [China] |
|
|
|
|
|
[Sell]
PTC FAN HEATER,mini fan heater |
|
|
| PTC heating element 2 heat settings:750W/1500W Adjustable thermostat Overheating protection Safety thermal fuse built in Power indicator light 6pcs/CTN CTN SIZE: 642*255*453mm 20pcs - 2190pcs 40pcs - 4614pcs 40'HQ/pcs - 5424pcs |
|
| » Posted by: Heat Expert Technology Haishu Ningbo Co.,LTD [China] |
|
|
|
|
|
[Sell]
Carbon fiber tube,composite tube, CFRP tube |
|
|
| This tubing is comprised of Carbon Fiber Braid and Unidirectional Fabrics. This product is ideal for building light weight frames and structures such as trusses.ighter than all metal tubing,very low coefficient of thermal expansion.Our Carbon Fiber tubing has been engineered to be much stronger under torsional and side loading than pultruded tubing and many times stronger than steel by weight.Our carbon fiber tubing is also significantly lighter than pultruded tubing. Our carbon fiber large tube has been designed so that the unidirectional layers are captured, eliminating longitudinal cracking and splitting. The finish on this product is different from our other product lines. These tubes show the texture of the carbon fiber braid with a wet shiny appearance and also its strength can be designed directionally. Specifications 1.Product name: carbon fiber tube tapered 2.light weight 3.high strength 4.nice look 5.can be customized made Description of goods Material Working process Specification ID x OD(mm) below is the regular size we make, we can make customer design carbon fiber tube 3k plain woven carbon fiber winding process 7 x 8 8 x 10 10 x 12 11 x 17 12 x 15 3k twill woven carbon fiber 13 x 16 14 x 16 15 x 17 17 x 19 18 x 20 19 x 22 special woven carbon fiber 22.4 x 25.4 27 x 30 28 x 30 29x 35 UD carbon fiber 30 x 36 88 x 91 232 x 236 300 x 304 Performance Application goold looking Lasting Performance Automotive Sporting Goods Light Weight - Less Density - 20% Of Steel Excellent Structural Properties Light Aircraft Tubing Advertising Panels High Strength Environmentally Safe |
|
| » Posted by: Heat Expert Technology Haishu Ningbo Co.,LTD [China] |
|
|
|
|
|
[Sell]
Braided Carbon Fiber Square Tubes |
|
|
| This Braided Carbon Fiber Square Tube is comprised of Carbon Fiber Braid and Unidirectional Fabrics. This product is ideal for building light weight frames and structures such as trusses.ighter than all metal tubing,very low coefficient of thermal expansion.Our Carbon Fiber tubing has been engineered to be much stronger under torsional and side loading than pultruded tubing and many times stronger than steel by weight.Our carbon fiber tubing is also significantly lighter than pultruded tubing. Our carbon fiber large tube has been designed so that the unidirectional layers are captured, eliminating longitudinal cracking and splitting. The finish on this product is different from our other product lines. These tubes show the texture of the carbon fiber braid with a wet shiny appearance and also its strength can be designed directionally. Specifications 1.Product name: carbon fiber tube tapered 2.light weight 3.high strength 4.nice look 5.can be customized made Description of goods Material Working process Specification ID x OD(mm) below is the regular size we make, we can make customer design carbon fiber tube 3k plain woven carbon fiber winding process 7 x 8 8 x 10 10 x 12 11 x 17 12 x 15 3k twill woven carbon fiber 13 x 16 14 x 16 15 x 17 17 x 19 18 x 20 19 x 22 special woven carbon fiber 22.4 x 25.4 27 x 30 28 x 30 29x 35 UD carbon fiber 30 x 36 88 x 91 232 x 236 300 x 304 Performance Application goold looking Lasting Performance Automotive Sporting Goods Light Weight - Less Density - 20% Of Steel Excellent Structural Properties Light Aircraft Tubing Advertising Panels High Strength |
|
| » Posted by: Heat Expert Technology Haishu Ningbo Co.,LTD [China] |
|
|
|
|
|
[Sell]
Super glossy and high strength Carbon Fiber Plate |
|
|
| RoHS , REACH , 6P TEST, ISO 9001:2008 Compliant Carbon Fiber,Carbon Fiber Pole,Carbon Fiber Rod,Carbon Fiber Tube, Carbon Fiber Tripods,Carbon Fiber Plate/Sheet,Carbon Fiber Products,Carbon Tube, Carbon Rod,Carbon Strip,Carbon Fiber Laminate Sheets,Carbon Fiber Reinforced Plastic (CRP), Pultruded Carbon fiber rod,RC models(RC helicopters,airplanes),R/C Hobby, R/C Part, R/C accessory, Specifications High strength, high modulus, light weight,carbon fiber plate,carbon fibre plate,carbon plates s235jr High strength, high modulus, light weight,carbon fiber plate,carbon fibre plate,carbon plates s235jr 1K, 3K, 6K, 12K APPLICATIONS:Synchronizer, canopy, bumper, decoration body, racket, sound trough, kayak, ski, models, helmets, radomes, ducting, brake linings, toolings. Carbon fiber reinforcement fabric, plates, tube, rod, chopped strand. |
|
| » Posted by: Heat Expert Technology Haishu Ningbo Co.,LTD [China] |
|
|
|
|
|
[Sell]
Poly-condensation silicones |
|
|
. Poly-condensation silicones usages
Poly-condensation silicones is primarily intended for mold making of gypsum, concrete, poly resin ,PU resin, unsaturated resin crafts, lighting and candles crafts , plastic toys , stationery gifts crafts industry, large statue, Buddha, relievo furniture, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils Factory, European buildings, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.
2. Poly-condensation silicones features:
1. Poly-condensation silicones with Good characteristics of easy-operation
2. Poly-condensation silicones with Light viscosity and good flowability
3. Poly-condensation silicones with Low shrinkage
4. Poly-condensation silicones with Excellent tensile and tear strength
5. Poly-condensation silicones with Favorable hardness
6. Poly-condensation silicones with High temperature resistance, acid and alkali-resistance and ageing resistance
7. Poly-condensation silicones with High duplication times
3. Some pictures of Poly-condensation silicones
4. Poly-condensation silicones discription
Poly-condensation silicones is a kind of flowable liquid silicone, the quality has nothing to do with the color. It consists of two components. Part A is a flowable liquid silicone rubber, part B is the curing agent. Firstly, after your previous work of dealing with the original model, take some liquid silicone rubber , add 2%-3% curing agent of the amount of silicon, and mix them evenly. Then after vacuum-pumping the mixture, you can pour it into the mold frame. The silicone mold will cured in 2-4 hours.
And more curing agent is needed; contrarily, if molds requiring slower drying and demould, less curing agent is needed.
5. Poly-condensation silicones frequently asked question
Why does the silicone rubber molds appeared striately and unsmoothly?
It is because the appearance of the product or the model itself is not perfect, and it has not been polished before the further operation. So when you make silicon molds, firstly you should polish the product, spray the mold spray evenly on the product. In this case, the problem can be avoided.
If you are interested in this kind Poly-condensation silicones , pls feel free to contact Ms Joy Chow
Tel: 86-755-89212380
Mob: 86-13554758940/ 18938867578
Fax: 86-755-89948030
Hyk at szrl dot net
www dot szrl dot net
|
|
| » Posted by: HongYe Silicone Rubber Manufacture [China] |
|
|
|
|
|
[Sell]
25 shore A RTV silicone rubber |
|
|
Applications of 25 shore A RTV silicone rubber
25 shore A RTV silicone rubber is intended for statue mold making ,candles.
25 shore A RTV silicone rubber is application for plastic toys, relieve furniture.
25 shore A RTV silicone rubber is used for architectural decoration, funiture decorative.
25 shore A RTV silicone rubber is application for sculpture, art crafts mold making and so on.
Features of 25 shore A RTV silicone rubber
25 shore A RTV silicone rubber for statue mold making is flowing liquid with general hardness of 25A° after curing with features:
1. resistance to deformation and high-temperature, acid-alkali and expansion
2. good tensile strength, tear strength and elongation
3. high reproduction times
Datasheet of 25 shore A RTV silicone rubber
Model
Appearance
Viscosity (cs)
Hardness (Ao)
Tensile Strength (kgf/c)
Tear Strength (kgf/)
Elongation (%)
Mixing ratio(%)
Operating Time(H)
Curing Time(H)
625
White
17000~19000
25
≥35
≥25
≥500
5%
0.5
2~4
Any more information pls abt 25 shore A RTV silicone rubber pls feel free to ask Ms.Joy
Tel: 86-755-89212380
Mob: 86-13554758940/ 18938867578
Fax: 86-755-89948030
Hyk at szrl dot net
www dot szrl dot net |
|
| » Posted by: HongYe Silicone Rubber Manufacture [China] |
|
|
|
|
|
[Sell]
Two parts rtv silicone for moulds |
|
|
Two parts rtv silicone for moulds
Applications of Two parts rtv silicone for moulds
Two parts rtv silicone for moulds is intended for statue mold making ,candles.
Two parts rtv silicone for moulds is application for plastic toys, relieve furniture.
Two parts rtv silicone for moulds is used for architectural decoration, funiture decorative.
Two parts rtv silicone for moulds is application for sculpture, art crafts mold making and so on.
Features of Two parts rtv silicone for moulds
Two parts rtv silicone for moulds is flowing liquid with general hardness of 22-50A° after curing with features:
1. resistance to deformation and high-temperature, acid-alkali and expansion
2. good tensile strength, tear strength and elongation
3. high reproduction times
Datasheet of Two parts rtv silicone for moulds
Model
Appearance
Viscosity (cs)
Hardness (Ao)
Tensile Strength (kgf/c)
Tear Strength (kgf/)
Elongation (%)
Mixing ratio(%)
Operating Time(H)
Curing Time(H)
628
White
14000~16000
25~28
≥35
≥25
≥500
2~3
0.5
2~4
Any more information of Two parts rtv silicone for moulds , please feel free to contact Joy
Tel: 86-755-89212380
Mob: 86-13554758940/ 18938867578
Fax: 86-755-89948030
Hyk at szrl dot net
www dot szrl dot net |
|
| » Posted by: HongYe Silicone Rubber Manufacture [China] |
|
|
|
|
|
[Sell]
how to make a shoe sole moulds ? |
|
|
how to make shoe sole moulds?
shoe sole moulds silicone application
shoe sole moulds silicone mainly used for shoe molds, sand casting, sole sampling, plaster models, simple products, products with non-complex patterns, as well as product models with stable size and non-deformation
shoe sole moulds silicone Standard Datasheet
Model
Appearance
Viscosity (cs)
Hardness (A0)
Tensile Strength (kgf/c)
Tear Strength (kgf/)
Elongation (%)
Mixing ratio (%)
Operating Time(h)
Curing Time(h)
208
White
15000
30~35
≥15
≥7.5
≥200
2~3
0.5
2~4
Instructions for how to make a shoe sole moulds
1. Brush some release agent to the original sole mold.(release agent can be soap water,detergent, vaseline etc)
2,Form a box for the original sole mold.
3,mix our shoe sole silicone with the catalyst (3%~4%)evenly and pour the mixture to the box.
4,After the shoe soles silcone rubber cured,simply demould it ,then you will get a finished sole silicone mold.
Any question abt how to make a shoe sole moulds pls free to ask Ms. Joy
Tel: 86-755-89212380
Mob: 86-13554758940/ 18938867578
Fax: 86-755-89948030
Hyk at szrl dot net
www dot szrl dot net
Key Words: how to make a shoe sole moulds, shoe sole mould silicone rubber, silicone rubebr for shoe sole mold making, shoe sole molding silicone
|
|
| » Posted by: HongKong Silicone Limited Co. [China] |
|
|
|
|
|
[Sell]
RTV2 silicone rubber |
|
|
RTV2 silicone rubber
Applications of RTV2 silicone rubber
RTV2 silicone rubber is intended for statue mold making ,candles.
RTV2 silicone rubber is application for plastic toys, relieve furniture.
RTV2 silicone rubber is used for architectural decoration, funiture decorative.
RTV2 silicone rubber is application for sculpture, art crafts mold making and so on.
Features of RTV2 silicone rubber
RTV2 silicone rubber for statue mold making is flowing liquid with general hardness of 22-50A° after curing with features:
1. RTV2 silicone rubber is resistance to deformation and high-temperature, acid-alkali and expansion
2. RTV2 silicone rubber is good tensile strength, tear strength and elongation
3. RTV2 silicone rubber is high reproduction times
Datasheet of RTV2 silicone rubber
Model
Appearance
Viscosity (cs)
Hardness (Ao)
Tensile Strength (kgf/c)
Tear Strength (kgf/)
Elongation (%)
Mixing ratio(%)
Operating Time(H)
Curing Time(H)
628
White
14000~16000
25~28
≥35
≥25
≥500
2~3
0.5
2~4
Model
Appearance
Viscosity (cs)
Hardness (Ao)
Tensile Strength (kgf/c)
Tear Strength (kgf/)
Elongation (%)
Mixing ratio(%)
Operating Time(H)
Curing Time(H)
728
White, red
15000~17000
26~28
≥35
≥22
≥470
2~3
0.5
2~4
Any more information of RTV2 silicone rubber , please feel free to contact Joy Chow
Tel: 86-755-89212380
Mob: 86-13554758940/ 18938867578
Fax: 86-755-89948030
Hyk at szrl dot net
www dot szrl dot net
|
|
| » Posted by: HongKong Silicone Limited Co. [China] |
|
|
|
|
|
[Sell]
RTV liquid silicone rubber |
|
|
(1) Applications of RTV liquid silicone rubber
RTV silicone can be used for production of different plaster,gypsum,resin,polyresin,
PU resin,wax,stone,epoxy,acrylic,polyester mould making
a. Decorative items: cornices,columns,ornaments,statues.....
b. Casting of funiture and decoration crafts
c. Construction: prefabrication of decrative features,pavement,paving stone,urban
furniture,concrete products
d. Soap,candles crafts,toys,sculpture
(2) Advantages of RTV silicone rubber
a. Hardness from 10 shore A to 60 shore A
b. Low viscosity good for casting pouring mold,add thickening agent,the silicone can
be brushable with nice operation ability.
c.High temperature resistance,high duplication times
d. Excellent tear and tensile strength
f. Different catalyst with different pot life and curing time,you can according your products
to choose the catalyst and the viscosity.
More informaiton wellcome to Ms sJoy
Tel: 86-755-89212380
Mob: 86-13554758940/ 18938867578
Fax: 86-755-89948030
Hyk at szrl dot net
www dot szrl dot net
|
|
| » Posted by: HongKong Silicone Limited Co. [China] |
|
|
|
|
|
[Sell]
Liquid silicone for insoles |
|
|
Liquid silicone for insoles
Application liquid silicone
1. Liquid silicone is suitatble for insoles
2. Liquid silicone is used for decoration, plate engrave,art crafts mold making
3. Liquid silicone is maily applied for resin crafts, unsaturated resin crafts mold making
4. Liquid silicone can be used for poly resin crafts, candle crafts, plastic crafts mold making
5. Liquid silicone is good for stationeries, plaster crafts, Bunddhist statue crafts, etc mold making
Features of Liquid silicone for insoles
a. good characteristics of easy-operation
b.light viscosity and good flowability
c. favorable tension
d. low shrinkage
e. no deformation
f. high temperaure resistance, acid and alkali-resistance and ageing resistance
Operations of Liquid silicone for insoles
Firstly, after your previous work of dealing with the origianal moldel, take some liquid silicone rubber, add cuing agent of the amount of silicon and mix them evenly.
Then after vacuum-pumping the mixture, you cn pour it into the mold frame. The sillicone mold will cured in 2~3 hours.
FOQ of Liquid silicone for insoles
1.How to deal with the mold which has a dry surface and a non-dry internal layer during the use of the silicone rubber?
The molding silicone rubber, which belongs to the condensation cure silicone rubber is cured by absorbing the moisture in the air. During the mold making process, the water content in the silicone rubber is dried but not adding supplementing appropriate amount of water, so the above phenomenon arises. The solution is that: the phenomenon is not a quality defect; It arises because the water content is not well controlled in order to prolong the shelf life of the silicone rubber; proper amount of 0.05% water is enough to be added into the silicone rubber for even mixing during use.
Notice of Liquid silicone for insoles
1. free sample is avalible
2. Reach certificate is avalible
3. MSDS, RHOS, GSG are avalible
4. 1kg/tin, 5kg/tin are avalible
Any question abt Liquid silicone for insoles pls free to ask Ms. Joy
Tel: 86-755-89212380
Mob: 86-13554758940/ 18938867578
Fax: 86-755-89948030
Hyk at szrl dot net
www dot szrl dot net |
|
| » Posted by: HongYe Silicone Rubber Supplier [China] |
|
|
|
|
|
[Sell]
RTV Silicone for GRC Moulds |
|
|
RTV Silicone for GRC Moulds applications
RTV Silicone for GRC Moulds is primarily intended for poly resin crafts, PU crafts, PU resin crafts, gypsum crafts,
RTV Silicone for GRC Moulds is used for unsaturated resin crafts, lighting and candles crafts, plastic toy, stationery gifts crafts
RTV Silicone for GRC Moulds is good for a large statue Buddha, furniture, furniture decorative materials, statues Buddha,
RTV Silicone for GRC Moulds is used for artifacts copied, building decoration materials, large-scale cement mold, artificial RTV Silicone for GRC Moulds is applicable for Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.
RTV Silicone for GRC Moulds features description
RTV Silicone for GRC Moulds is white or red flowing liquid with general hardness of 22-50A° After curing. Molding silicon rubber is a kind elastic silicon rubber mold which features with resistance to deformation, high-temperature, acid-alkali and expansion as well as high reproduction times, good tensile strength, tear strength and elongation.
RTV Silicone for GRC Moulds operations
If the customer wants to make large products and large size molds, the mold should be made of silicon rubber with high hardness. On the contrary, if the mold with fine and precision patterns, GRC Moulding Silicones should be made of silicon with low hardness. The amount of the curing agent depends on the actual requirements of the customer. If molds requiring fast drying and demold, more curing agent is needed; Contrarily, if molds requiring slower drying and demold, less curing agent is needed.
(Note: Our company does not recommend you to add silicone oil. If a special soft silicone mold or fine detailed and complex patterns products are required, 5%-10% silicone oil can be added to soften the mold for easy demold.
Frequently asked questions of RTV Silicone for GRC Moulds
Why does the silicone rubber mold have few molding times?
GRC Moulding Silicones has few molding times is due to follwoing reasons: Adding too much silicone oil which will destroy the molecular of silicone rubber; Making the mold for small and fine detailed products with higher hardness silicone rubber which is easy to break; Making the mold for large products with soft silicone rubber which will reduce the tensile and tear strength of the mold, and the mold will have deformation. Thus, we should take the proper silicone rubber to make the mold for suitable products.
Any question abt RTV Silicone for GRC Moulds pls feel free to ask Ms. Joy
Tel: 86-755-89212380
Mob: 86-13554758940/ 18938867578
Fax: 86-755-89948030
Hyk at szrl dot net
www dot szrl dot net
|
|
| » Posted by: HongYe Silicone Rubber Supplier [China] |
|
|
|
|
|
[Sell]
Shoe mold silicone rubbers |
|
|
Shoe mold silicone rubbers usage
for Shoe soles mold, pouring mold, sand casting.
Shoe mold silicone rubbers application
Shoe mold silicone rubbers mainly used for shoe molds, sand casting, sole sampling, plaster models, simple products, products with non-complex patterns, as well as product models with stable size and non-deformation
Shoe mold silicone rubbers Standard Datasheet
Model
Appearance
Viscosity (cs)
Hardness (A0)
Tensile Strength (kgf/c)
Tear Strength (kgf/)
Elongation (%)
Mixing ratio (%)
Operating Time(h)
Curing Time(h)
208
White
15000
30~35
≥15
≥7.5
≥200
2~3
0.5
2~4
Any question abt Shoe mold silicone rubbers pls free to ask Ms. Joy
Tel: 86-755-89212380
Mob: 86-13554758940/ 18938867578
Fax: 86-755-89948030
Hyk at szrl dot net
www dot szrl dot net
|
|
| » Posted by: HongYe Silicone Rubber Supplier [China] |
|
|
|
|
|
[Sell]
Mold making silicone rubber |
|
|
Brief description:
Mold making silicone rubber:
1. Resistance to deformation, high-temperature
2. High reproduction times
3. Good tensile strength
4. Exceptional fluidity and good operability.
Detailed description:
Mold making silicone rubber
Mold making silicone rubber applications
Mold making silicone rubber is primarily intended for poly resin crafts, PU crafts, PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy , stationery gifts crafts industry, a large statue Buddha, furniture, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.
Mold making silicone rubber description
Mold making silicone rubber is white or red flowing liquid with general hardness of 22-50A°after curing. Molding silicon rubber is a kind elastic silicon rubber mold which features with resistance to deformation, high-temperature, acid-alkali and expansion as well as high reproduction times, good tensile strength, tear strength and elongation.
Frequently asked questions of silicone rubber for mold making
Why does the silicone rubber mold have few molding times?
The silicone rubber mold has few molding times is due to follwoing reasons: adding too much silicone oil which will destroy the molecular of silicone rubber; making the mold for small and fine detailed products with higher hardness silicone rubber which is easy to break; making the mold for large products with soft silicone rubber which will reduce the tensile and tear strength of the mold, and the mold will have deformation. Thus, we should take the proper silicone rubber to make the mold for suitable products.
Any questions of Mold making silicone rubber, please feel free to contact Rose:
E-MAIL: hyjz@szrl.net
TEL: 086-755-89948294
Mobile:86-1938867525
Place of Origin Guangdong China
Brand Name Hong Ye Silicone Rubber
Model Number HY625 HY630 silicone rubber
Payment & Shipping Terms:
Minimum Order Quantity: 200 Kilogram
Price: FOB shenzhen USD 5.8~7.5/kg
Packaging Details: 25kg/drum and 200kg/drum
Delivery Time: within 3 days after payment confirmed in our bank.
Payment Terms: L/C, T/T
Supply Ability: 8 Ton per Day 240 ton per month
Certifications: ROHS.MSDS.SGS ISO9001:2000
|
|
| » Posted by: Shenzhen Hong Ye Jie Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Manual Molding Silicone Rubber |
|
|
Brief Description/Features of Manual Molding Silicone Rubber
Manual molding silicone rubber
1. Good elasticity
2. Non-deformation
3. Heat resistance
4. Low shrinkage
a. Applications of Manual Molding Silicone Rubber
Manual Molding Silicone Rubber is mainly used for model design of manual mold, PVC plastic molds, cement products, low melting point alloy molds, alloy toys, plastic toys, electronics, handicrafts, stationery, large-scale sculpture, reproduction of cultural relic, shoe sole molds, pad printing allocation, Electronic equipment ant vibration, etc.
b. Model Codes of Manual Molding Silicone Rubber
HY-528# is applicable to make molds of smaller products and the production will be 2-3 pieces.
HY-540#, compared to other two types, for its moderate hardness and better quality & performance, its production will be 20-30 pieces.
HY-570# is applicable to large size products duplications and Electronic equipment ant vibration.
c. Operation Instructions for Manual Molding Silicone Rubber
RTV-2 Manual Molding Silicone Rubber is a flow able liquid, and the quality has nothing to do with the color. It consists of two commonest. Part A is a flow able liquid silicone rubber, part B is the curing agent. Firstly, after your previous work of dealing with the original model, take some liquid silicone rubber , add 2%-3% curing agent of the amount of silicon, and mix them evenly. Then after vacuum-pumping the mixture, you can pour it into the mold frame. The silicone mold will cured in 2-3 hours.
Note: The time for vacuum-pumping should be less than 3 to 5 minutes, otherwise, once the silicone rubber has cross-link reaction during vacuum zing, it will not be operated.
FAQ of manual molding silicone rubber –
How to prevent silicone manual molds getting sticky?
The main reason for this problem is that you do not handle the products or original molds well, and then you should deal with the original mold or products carefully before molding. Such as for the products with a complicated pattern or an unsmoothed surface, you should polish and clean the products, after which it will be molded, then spray the release agent. Normally, the release agent can be Vaseline, detergent, liquid wax, etc. In practical process, you can bush different release agent according to different material.
The second reason is that the operator pours the silicone into the mold when the mixture is mixed evenly, then the finish silicone mold will not cure and dry entirely.
Further information on Manual Molding Silicone Rubber is available. Please feel free to contact Rose.
Website: http://www.szrl.net
Tel: 0086-755-89948294.
Mobile: 0086-18938867525
Fax: 0086-755-89948030
E-mail: hyjz@szrl.net
ADD: Liulian Shibi industrial, Pingdi town, Longgang district, Shenzhen, China
SHENZHEN HONG YE JIE TECHNOLOGY CO., LTD
Place of Origin Guangdong China
Brand Name Hong Ye Silicone Rubber
Model Number HY528, HY540 manual mold silicone rubber
Payment & Shipping Terms:
Minimum Order Quantity: 200 Kilogram
Price: FOB shenzhen USD 4.8~7.5/KG
Packaging Details: 25kg/drum and 200kg/drum
Delivery Time: within 3 days after payment confirmed in our bank.
Payment Terms: L/C,T/T
Supply Ability: 8 Ton per Day
Certifications: ROHS.MSDS.SGS ISO9001:2000
|
|
| » Posted by: Shenzhen Hong Ye Jie Technology Co., Ltd. [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 next»
|
|
|
