|
|
|
|
|
|
|
[Sell]
Clomifene Citrate |
 |
|
Clomifene Citrate
Synonyms: SEROPHENE; PERGOTIME; CLOMPHID
CAS: 50-41-9
EINECS: 200-035-3
Assay: more than 98%. USP28
Packing: 1Kg/foil bag.
Delivery: Courier.
MF: C32H36ClNO8
MW: 598.08
Character: white crystalline powder. Melting point 116.5-118℃, slightly soluble in ethanol, chloroform, water, insoluble in ether.
Usage: An unducer of ovulation. A gonad-stimulating principle. For the anti-estrogen (fertility inducer), and material in dysfunctional uterine bleeding, polycystic ovary, menstrual disorders and drug-induced amenorrhea and other gynecological diseases, hormone. Used as an antineoplastic raw materials.
|
|
» Posted by: Wuhan YuanCheng Gongchuang Technology Co., Ltd. [China]  |
|
|
|
|
|
[Sell]
Exemestane (Aromasin) |
|
|
Exemestane (Aromasin)
CAS: 107868-30-4
Assay: 98%-102%. USP28
Packing: 1KG/foil bag
Delivery: Courier.
MF: C20H24O2
MW: 296.4
Character: White crystalline powder, mp 155.13°C.
Usage: An antineoplastic (hormonal) raw materials.
|
|
| » Posted by: Wuhan YuanCheng Gongchuang Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Adriamycin HCL |
|
|
Adriamycin HCL
Synonyms: Doxorubicin HCL; Doxorubicin hydrochloride
CAS: 25316-40-9
EINECS: 246-818-3
Assay: 98-102%.
Standard: USP30/EP/BP
Packing: 1Kg/foil bag
MF: C27H30ClNO11
MW: 579.98
Character: Orange-Red Crystalline Solid. Aqueous solutions yellow-orange at acid pHs, orange-red at neutral pHs, and violet blue over pH 9.
Usage: Used as an antineoplastic raw material. Strong fluorescent dye intercalating into DNA. Antitumour antibiotic. Effect of adriamycin on heart mitochondrial DNA. Inhibitor of reverse transcriptase and RNA polymerase; immunosuppressive agent.
Preparation Products: Pirarubicin
|
|
| » Posted by: Wuhan YuanCheng Gongchuang Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Letrozole (Femara) |
|
|
Letrozole (Femara)
CAS: 112809-51-5
Assay: 98.0-102.0%. USP32
Packing: 1Kg/foil bag
Delivery: Courier.
MF: C17H11N5
MW: 285.3
Character: White crystalline powder. MP: 181-183°C
Usage: A nonsteroidal aromatase inhibitor structurally related to Fadrozole. Antineoplastic raw materials. For the treatment of breast cancer.
|
|
| » Posted by: Wuhan YuanCheng Gongchuang Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Fulvestrant |
|
|
Fulvestrant
Synonyms: FASLODEX
CAS: 129453-61-8
MF: C32H47F5O3S
MW: 606.77
Assay: 99% min. USP32
Packing: 10 grams/foil bag
Delivery: Courier.
Character: White Powder, mp 104-106℃
Usage: A novel steroidal estrogen antagonist reported to lack any partial agonist activity. Antineoplastic (hormonal). Used as an antineoplastic raw materials.
|
|
| » Posted by: Wuhan YuanCheng Gongchuang Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Anastrozole (Arimidex) |
|
|
Anastrozole (Arimidex)
CAS: 120511-73-1
Assay: 98.0%--102.0%. USP32
Packing: 1Kg/foil bag.
Delivery: Courier.
MF: C17H19N5
MW: 293.37
Character: White crystalline powder. MP 81-82°C.
Usage: An aromatase inhibitor. Used as an antineoplastic raw materials.
Potent selective triazole aromatase inhibitors, can inhibit the cytochrome P-450 aromatase enzyme which depends blocking the biosynthesis of estrogen, and estrogen to stimulate breast cancer cell growth factors. Treatment of breast cancer, especially for those with hormone relapse after adjuvant therapy after menopause for women with advanced breast cancer.
|
|
| » Posted by: Wuhan YuanCheng Gongchuang Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
RTV2 Liquid silicone mold making rubber |
|
|
RTV2 Liquid silicone mold making rubber
Introduction
This product is two-component, RTV silicone rubber which with long service life and durable, especially suitable for the mold manufacture of silicone rubber.
Feature
RTV2 Liquid silicone mold making rubber
low shrinkage and high dulplicate time
catalyst free
easy for operation Application
Especially suitable for the molding manufacture of UPR and other craft products,mold making silicone
Property
Appearance
Part A: Ivory viscous liquid
Part B: transparent liquid of colorless to light yellow
Viscosity
(25°C,rotary viscometer)
18000~22000mpa.s
How to use
1.The cast pouring, for example:
Prepare a frame, fix the prototype for copy into the frame, (if the prototype’s material is glass or ceramic, the release agent is necessary to prevent sticking.
2. Take 2~3%curing agent of RTV, and mix it evenly with rubber.
3.Vacuum defoaming in 1~3 min,inject the rubber into the type box, then vacuum defoaming again, curing 24 hours in nature room temperature, use it after demold.
4. Demold after 3 hours’ room temperature curing, and then use it after 24 hours’ keep mold under the same condition.
Storage
Sealing storage in the environment of dry, cool and ventilated. storage temperature should be kept during 0~40°C.
Shelf-life
12 months under above conditions. It remain can be used after shelf life if the technical data is qualified.
Package
5Kg/barrel,25 Kg/barrel,200kg/barrel
Any questions for Liquid Mould Making Silicone Rubber, pls feel free to contact Taylor:
Mob: +86-18938867522
Tel: + 86-755-89948019
E-mail: hyw(at)szrl(dot)net
Skype: taylordl828
Msn: taylordl828(at)hotmail(dot)com
|
|
| » Posted by: SHENZHEN HONG YE JIE TECHONOLOGY CO., LTD. [China] |
|
|
|
|
|
[Sell]
molding silicone rubber |
|
|
Brief description:
Silicone rubber for mold making:
1. resistance to deformation, high-temperature
2. high reproduction times
3. good tensile strength
4. exceptional fluidity and good operability.
Silicone rubber for mold making applications
Silicone rubber for mold making is primarily intended for poly resin crafts, PU crafts, PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy , stationery gifts crafts industry, a large statue Buddha, furniture, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.
Silicone rubber for mold making description
Silicone rubber for mold making is white or red flowing liquid with general hardness of 22-50A after curing. Molding silicon rubber is a kind elastic silicon rubber mold which features with resistance to deformation, high-temperature, acid-alkali and expansion as well as high reproduction times, good tensile strength, tear strength and elongation.
Frequently asked questions of silicone rubber for mold making
Why does the silicone rubber mold have few molding times?
The silicone rubber mold has few molding times is due to follwoing reasons: adding too much silicone oil which will destroy the molecular of silicone rubber; making the mold for small and fine detailed products with higher hardness silicone rubber which is easy to break; making the mold for large products with soft silicone rubber which will reduce the tensile and tear strength of the mold, and the mold will have deformation. Thus, we should take the proper silicone rubber to make the mold for suitable products.
|
|
| » Posted by: Shenzhen Hong Ye Jie Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Silicone rubber for mold making |
|
|
Usage of liquid rtv silicone rubber for sculpture molding:
Liquid rtv silicone rubber for sculpture molding is intended for making silicone rubber mold for resin crafts, candles, plastic toys, relieve furniture, architectual decoration, furniture decoration, sculpture and so on.
Feature of liquid rtv silicone rubber for sculpture molding:
Liquid rtv silicone rubber for sculpture molding is flowing liquid with general hardness of 22-50 A after curing with features:
1)low shrinkage
2)good operation
3)high tear and tensile strength
4)curing agent free
5)easy de-mold
6)high reproduction times
7)resistance to deformation and high-temperature, acid-alkali
Operations of liquid rtv silicone rubber for sculpture molding:
If customers want to make large products and large size moulds, the mould should be made of silicone rubber with high hardness. On the contrary, if the mould with fine and precision patterns, it should be made of silicone with low hardness. The amount of the curing agent depends on the actual requirements of the customer. If mould requiring fast drying and demould, more curing is needed.
(Note: our company does not recommend you to add silicon oil. If a special soft silicom mould or fine detailed and complex patterns products are required, 5% - 10% silicon oil could be added to soften the mould for easy demould.)
|
|
| » Posted by: Shenzhen Hong Ye Jie Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
pad printing silicone rubber |
|
|
Pad Printing Silicone Rubber:
Pad printing silicone rubber is specially designed for silicon pads which requires to be exquisite, without impurity or granules, and has advantages such as wearability, high-temperature resistance, and good in printing effect due to adding American Dupont Teflon high-temperature resistance new material. Applications: It is mainly used for printing irregular patterns of plastic toys, electroplating products, electronic toys, trademarks. The silicon pad is a carrier which transfers the patterns from the steel plate onto the products surface.
.
Pad Printing Silicone Rubber Features:
Pad printing silicone rubber with high print times and abrasion resistance. Pad printing silicone rubber has good printing effects, permanent and durable. We can provide all kinds of color and our catalyst is free.
.
Pad Printing Silicone Rubber Operation Instructions:
Pad printing silicone rubber is two-component silicone, part A is liquid silicon rubber, part B is catalyst. The usual mixture of silicone rubber and catalyst is 100 to 2 or 100 to 3.we take 100g of liquid silicon rubber and 2g-3g catalyst, mix them and pour it to your mold. After 2 to 4 hours, you will get a Pad printing silicone rubber.
.
Frequently asked question of pad printing silicone rubber:
The reasons why the silicone pad has a short service life are listed as follows:
(1)The problem caused by inappropriate filtration of silicone rubber, and impurities in the packaging process due to the uncleanness of barrels and bags.
(2)The short service life of the silicone pad has a close relationship with the adding amount of silicone oil. The more the silicone oil added, the softer the silicone pad will be. The silicone oil will destroy the molecule of the silicone rubber, thereby bringing about the non-durable and easy ageing of the silicone pad.
(3)All the users should know the properties of pad printing silicone rubber. The service life of the silicone pad has close relationship with the size of the printed patterns. For example, if a big pattern to be printed, a big silicone pad is required; if a small pattern to be printed, a small silicone pad (the silicone pad has to be adjusted according to the size of the patterns, and the proportion between the size of the silicone pad and the pattern is 3:1.)
|
|
| » Posted by: Shenzhen Hong Ye Jie Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Pad Printing Silicone Rubber |
|
|
Pad Printing Silicone Rubber Usages:
Pad printing silicone rubber is mainly use for printing irregular patterns of plastic toys, electroplating toys and trade makers . Pad printing silicone rubber as a carrier which transfer patterns on the steel plate to the toys products surface.
Pad Printing Silicone Rubber Features:
Pad printing silicone rubber with high print times and abrasion resistance. Pad printing silicone rubber has good printing effects, permanent and durable. We can provide all kinds of color and our catalyst is free.
Pad Printing Silicone Rubber Operation Instructions:
Pad printing silicone rubber is two-component silicone, part A is liquid silicon rubber, part B is catalyst. The usual mixture of silicone rubber and catalyst is 100: 2 or 100: 3. E.g. we take 100g of liquid silicon rubber and 2g-3g catalyst, mix them and pour it to your mold. A fter 2-4 hours
Any questions, please feel free to contact Annie (sales manager):
TEL: 086-755-89948013
FAX: 086-755-89948030
MOBILE:086-18938861891
E-mail: hyjx(at)szrl(dot)net
MSN:annie2012a(at)msn(dot)cn
|
|
| » Posted by: Shenzhen GreenYe Technology Co. Ltd. [China] |
|
|
|
|
|
[Sell]
pad printing silicon rubber |
|
|
Brief description:
Pad printing silicone :
1. resistance to deformation, high-temperature
2. high printing times
3. good aging resistance
4. exceptional elasticity
5 great printing effect
Pad Printing Silicone Rubber Usages:
Pad printing silicone rubber is mainly use for printing irregular patterns of plastic toys, electroplating toys and trade makers . Pad printing silicone rubber as a carrier which transfer patterns on the steel plate to the toys products surface.
We can provide all kinds of color and our catalyst is free.
Any questions of Pad Printing Silicone Rubber, please feel free to contact Kaimi:
TEL: 086-755-89948294
FAX: 086-755-89948030
MOBILE:086-18938867528
Website: www(dot)szrl(dot)net
E-MAIL: hyju(at)szr(dot)net |
|
| » Posted by: Shenzhen Hong Ye Jie Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
manual mold silicon rubber |
|
|
Manual molding silicone rubber
1. Good elasticity
2. Non-deformation
3. Heat resistance
4. Low shrinkage
a. Applications of Manual Molding Silicone Rubber
Manual Molding Silicone Rubber is mainly used for model design of manual mold, PVC plastic molds, cement products, low melting point alloy molds, alloy toys, plastic toys, electronics, handicrafts, stationery, large-scale sculpture, reproduction of cultural relic, shoe sole molds, pad printing allocation, Electronic equipment antivibration, etc.
FAQ of manual molding silicone rubber
How to prevent silicone manual molds getting sticky?
The main reason for this problem is that you do not handle the products or original molds well, then you should deal with the original mold or products carefully before molding. Such as for the products with a complicated pattern or a unsmoothed surface, you should polish and clean the products after which it will be molded ,then spray the release agent. Normally, the release agent can be Vaseline , detergent. liquid wax Etc. In practical process, you can bush different release agent according to different material.
The second reason is that the operator pour the silicone into the mold when the mixture is mixed evenly, then the finish silicone mold will not cure and dry entirely.
Further information on Manual Molding Silicone Rubber is available. Please feel free to contact Kaimi.
Website: www(at)szrl(dot)net
Tel: 0086-0755-89948294
Mobile: 0086-18938867528
Fax: 0086-755-89948030
E-mail: hyju(at)szrl(dot)net |
|
| » Posted by: Shenzhen Hong Ye Jie Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
mould making silicon rubber |
|
|
Brief description:
Silicone rubber for mold making:
1. resistance to deformation, high-temperature
2. high reproduction times
3. good tensile strength
4. exceptional fluidity and good operability.
Detailed description:
Silicone rubber for mold making applications
Silicone rubber for mold making is primarily intended for poly resin crafts, PU crafts, PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy , stationery gifts crafts industry, a large statue Buddha, furniture, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.
Frequently asked questions of silicone rubber for mold making
Why does the silicone rubber mold have few molding times?
The silicone rubber mold has few molding times is due to follwoing reasons: adding too much silicone oil which will destroy the molecular of silicone rubber; making the mold for small and fine detailed products with higher hardness silicone rubber which is easy to break; making the mold for large products with soft silicone rubber which will reduce the tensile and tear strength of the mold, and the mold will have deformation. Thus, we should take the proper silicone rubber to make the mold for suitable products.
Any questions of silicone rubber for mold making, please feel free to contact Kaimi:
TEL: 086-755-89948294
FAX: 086-755-89948030
MOBILE:086-18938867528
Website: www(dot)szrl(dot)net
E-MAIL: hyju(at)szrl(dot)net |
|
| » Posted by: Shenzhen Hong Ye Jie Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Two Component Rtv Silicone Rubbers |
|
|
Two Component Rtv Silicone Rubbers
Two Component Rtv Silicone Rubbers applications
Two Component Rtv Silicone Rubbers is suitatble for Product duplication and mold manufacture such as
1.Two Component Rtv Silicone Rubbers used for toys, gifts
2. Two Component Rtv Silicone Rubbers good for decoration, plate engrave
3. Two Component Rtv Silicone Rubbers suitable for human replica, art crafts,
4. Two Component Rtv Silicone Rubbers applicable for resin crafts, unsaturated resin crafts
5. Two Component Rtv Silicone Rubbers used for poly resin crafts, candle crafts, plastic crafts
6. Two Component Rtv Silicone Rubbers suitalble for stationeries, plaster crafts, Bunddhist statue crafts, etc.
Two Component Rtv Silicone Rubbers description
a. good characteristics of easy-operation
b.light viscosity and good flowability
c. favorable tension
d. low shrinkage
e. no deformation
f. high temperaure resistance, acid and alkali-resistance and ageing resistance
Two Component Rtv Silicone Rubbers operations
Firstly, after your previous work of dealing with the origianal moldel, take some liquid silicone rubber, add 2%~3% cuing agent of the amount of silicon and mix them evenly.
Then after vacuum-pumping the mixture, you cn pour it into the mold frame. The sillicone mold will cured in 2~3 hours.
Note: the time for vacuum-pumping should be less than 3-5mins, othewise, once the silicone rubber has cross-link reaction during vacuumizing. it will not be operated.
Any question abt Two Component Rtv Silicone Rubbers pls feel free to ask Ms. Joy
Tel: 86-755-89948158
86- 13554758940/18938867578
Fax: 86-755-89948030
|
|
| » Posted by: HongYe Silicone Rubber Manufacture [China] |
|
|
|
|
|
[Sell]
RTV2 silicone rubber |
|
|
RTV2 silicone rubber
Applications of RTV2 silicone rubber
RTV2 silicone rubber is intended for statue mold making ,candles.
RTV2 silicone rubber is application for plastic toys, relieve furniture.
RTV2 silicone rubber is used for architectural decoration, funiture decorative.
RTV2 silicone rubber is application for sculpture, art crafts mold making and so on.
Features of RTV2 silicone rubber
RTV2 silicone rubber for statue mold making is flowing liquid with general hardness of 22-50A° after curing with features:
1. RTV2 silicone rubber is resistance to deformation and high-temperature, acid-alkali and expansion
2. RTV2 silicone rubber is good tensile strength, tear strength and elongation
3. RTV2 silicone rubber is high reproduction times
Datasheet of RTV2 silicone rubber
Model
Appearance
Viscosity (cs)
Hardness (Ao)
Tensile Strength (kgf/c)
Tear Strength (kgf/)
Elongation (%)
Mixing ratio(%)
Operating Time(H)
Curing Time(H)
628
White
14000~16000
25~28
≥35
≥25
≥500
2~3
0.5
2~4
Model
Appearance
Viscosity (cs)
Hardness (Ao)
Tensile Strength (kgf/c)
Tear Strength (kgf/)
Elongation (%)
Mixing ratio(%)
Operating Time(H)
Curing Time(H)
728
White, red
15000~17000
26~28
≥35
≥22
≥470
2~3
0.5
2~4
Any more information of RTV2 silicone rubber , please feel free to contact Joy Chow
Tel: 0086-755-89948006
86-18938867578
Fax: 0086-755-89948030
|
|
| » Posted by: HongYe Silicone Rubber Manufacture [China] |
|
|
|
|
|
[Sell]
rtv liquid molding silicone rubber |
|
|
rtv liquid molding silicone rubber features
rtv liquid molding silicone rubber is flowing liquid silicone rubber with general hardness of 22- 50 shore A after curing with features:
a. good characteristics of easy-operation
b.light viscosity and good flowability
c. favorable tension
d. low shrinkage
e. no deformation
f. high temperaure resistance, acid and alkali-resistance and ageing resistance
rtv liquid molding silicone rubber application
rtv liquid molding Silicon rubber for PU/poly resin products, unsaturated resin products, plaster products, candles and gypsums crafts, toys, soap molds, statues,casting molds making, etc.
rtv liquid molding silicone rubber operations
rtv liquid molding silicone rubber is a kind of flowing liquid, if customers want to make large products and large size moulds, the mould should be made of silicone with low hardeness. The amount of curing agent depends on the actual requirements of the customer. If mould require fast drying and demould, more curing is needed.
Are there any question abt rtv liquid molding silicone rubber pls feel free to ask Ms.Joy
Tel: 086-0755-89948158
Cell phone:086- 13554758940/18938867578
Fax: 086-0755-89948030
|
|
| » Posted by: HongYe Silicone Rubber Manufacture [China] |
|
|
|
|
|
[Sell]
Pad Printing Silicone Rubber |
|
|
Pad Printing Silicone Rubber:
Pad printing silicone rubber is specially designed for silicon pads which requires to be exquisite, without impurity or granules, and has advantages such as wearability, high-temperature resistance, and good in printing effect due to adding American Dupont Teflon high-temperature resistance new material. Applications: It is mainly used for printing irregular patterns of plastic toys, electroplating products, electronic toys, trademarks. The silicon pad is a carrier which transfers the patterns from the steel plate onto the products’ surface.
.
Pad Printing Silicone Rubber Features:
Pad printing silicone rubber with high print times and abrasion resistance. Pad printing silicone rubber has good printing effects, permanent and durable. We can provide all kinds of color and our catalyst is free.
.
Pad Printing Silicone Rubber Operation Instructions:
Pad printing silicone rubber is two-component silicone, part A is liquid silicon rubber, part B is catalyst. The usual mixture of silicone rubber and catalyst is 100 to 2 or 100 to 3.we take 100g of liquid silicon rubber and 2g-3g catalyst, mix them and pour it to your mold. After 2 to 4 hours, you will get a Pad printing silicone rubber.
.
Frequently asked question of pad printing silicone rubber:
The reasons why the silicone pad has a short service life are listed as follows:
(1)The problem caused by inappropriate filtration of silicone rubber, and impurities in the packaging process due to the uncleanness of barrels and bags.
(2)The short service life of the silicone pad has a close relationship with the adding amount of silicone oil. The more the silicone oil added, the softer the silicone pad will be. The silicone oil will destroy the molecule of the silicone rubber, thereby bringing about the non-durable and easy ageing of the silicone pad.
(3)All the users should know the properties of pad printing silicone rubber. The service life of the silicone pad has close relationship with the size of the printed patterns. For example, if a big pattern to be printed, a big silicone pad is required; if a small pattern to be printed, a small silicone pad (the silicone pad has to be adjusted according to the size of the patterns, and the proportion between the size of the silicone pad and the pattern is 3:1.)
.
Payment & Shipping Terms:
Minimum Order Quantity: 100 Kilogram
Price: FOB shenzhen USD 7.8-15.6
Packaging Details: 25kg/drum and 200kg/drum
Delivery Time: within 3 days after receiving your bank receipt
Payment Terms: L/C,T/T,Western Union
Supply Ability: 8 Ton per Day
For more information, please contact with Mr Andy:
FAX: 0086-755-89948030
MOBILE: 0086-18938867592
E-mail:hyji(at)szrl(dot)net
MSN:haoee(at)msn(dot)cn
website:www(dot)szrl(dot)net |
|
| » Posted by: Shenzhen Hong Ye Jie Technology CO., Ltd.（CN） [China] |
|
|
|
|
|
[Sell]
Electronic Potting Compound |
|
|
Product Feature
HY 9055 is a kind of low viscosity, Inherent flame resistance, two components addtion cured potting silicone with heat-conducting. It cures with both on room temperature and heated temperature. It has the feature of the higher temperature the faster of the curing time. It can be applied to electronic components for insulation, waterproofing, fixed and flame retardant. It mainly applied in electronic components surface with materials of PC(Polycarbonate)、PP、ABS、PVC, etc. and metal materials.
*
*
Typical Application
HY 9055 could be applied to
- high powered electronics
- DC/DC module and circuit board which requires heat dissipation and high temperature resistance.
-It can be broadly used for LED screen, Wind Power Generator, PCB substrate, etc.
*
*
TECHNICAL GUIDELINES
1. Pls put part A and part B in separate container and stir evenly before mixing the two part together.
2.Mixing Ratio: part A: part B = 1:1
3. Deaeration the mixture in vacuum pump under 0.08 MPa for 3-5 minutes.Then the mixture could be used for pouring.
4. Pls note that the thickness of the silicone affects the curing time. If the silicone used is a little thick,then the curing time will be a little longer.The temperature also affects the curing time.When in lower temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization. With temperature of 80～100 centigrade, the silicone will cure in 15 minutes; while in 25 centigrade room temperature, the silicone will cure around 8 hours.
*
Notes:
1.The following material may hinder the curing of HY 9055, So pls use after the test. When necessary, pls clean the application areas.
Organotin compound or Condensation silicone with organotin
Sulphur, sulfide and sulfur rubber materials.
Amine compounds as well as contains the amine materials.
Pewters solder flux
2. HY 9055 should be sealed storage.The mixture should be used up disposably to avoid causing waste.
3. HY 9055 belongs to non-dangerous goods, but keep away from mouth and eyes.
4. When it gets stratified after a period of storage, Please mix it evenly before using,which does not affect the performance.
*
*
PACKAGE
20Kg/pail as a set (Part A 10Kg + Part B 10Kg)
SHELF LIFE AND TRANSPORTATION
1. Twelve(12) months when stored at 24C in tightly closed original packages.
2. This kind of product is non-dangerous product, which could be transported as general chemicals.
3. Storage beyond the expired date doesnot necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
*
*
For more information, please contact with Mr Andy:
FAX: 0086-755-89948030
MOBILE: 0086-18938867592
E-mail:hyji(at)szrl(dot)net
MSN:haoee(at)msn(dot)cn
website:www(dot)szrl(dot)net |
|
| » Posted by: Shenzhen Hong Ye Jie Technology CO., Ltd.（CN） [China] |
|
|
|
|
|
[Sell]
Silicone rubber for mold making |
|
|
Brief description:
Silicone rubber for mold making:
1. resistance to deformation, high-temperature
2. high reproduction times
3. good tensile strength
4. exceptional fluidity and good operability.
*
*
Silicone rubber for mold making applications
Silicone rubber for mold making is primarily intended for poly resin crafts, PU crafts, PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy , stationery gifts crafts industry, a large statue Buddha, furniture, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.
*
*
Silicone rubber for mold making description
Silicone rubber for mold making is white or red flowing liquid with general hardness of 22-50A after curing. Molding silicon rubber is a kind elastic silicon rubber mold which features with resistance to deformation, high-temperature, acid-alkali and expansion as well as high reproduction times, good tensile strength, tear strength and elongation.
*
*
Frequently asked questions of silicone rubber for mold making
Why does the silicone rubber mold have few molding times?
The silicone rubber mold has few molding times is due to follwoing reasons: adding too much silicone oil which will destroy the molecular of silicone rubber; making the mold for small and fine detailed products with higher hardness silicone rubber which is easy to break; making the mold for large products with soft silicone rubber which will reduce the tensile and tear strength of the mold, and the mold will have deformation. Thus, we should take the proper silicone rubber to make the mold for suitable products.
*
*
For more information, please contact with Mr Andy:
FAX: 0086-755-89948030
MOBILE: 0086-18938867592
E-mail:hyji(at)szrl(dot)net
MSN:haoee(at)msn(dot)cn
website:www(dot)szrl(dot)net
*
*
Place of Origin: Guangdong China
Brand Name: Hong Ye Silicone Rubber
Minimum Order Quantity: 200 Kilogram
Price: FOB shenzhen USD 5.20-7.40
Packaging Details: 25kg/drum and 200kg/drum
Delivery Time: within 3 days after payment confirmed in our bank.
Payment Terms: L/C,T/T,WesternUnion
Supply Ability: 8 Ton per Day
Certifications: RoHS.MSDS.SGS ISO9001:2000
|
|
| » Posted by: Shenzhen Hong Ye Jie Technology CO., Ltd.（CN） [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 next»
|
|
|
