|
|
|
|
|
|
[Sell]
Sell 13.56 MHz rfid module JMY608 Interface: USB (HID standard) |
|
|
This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me. JMY608, based on NXP SL RC400, is the reader module. The module supports series IC cards according to ISO15693, and imitates the USB keyboard to read and output the card data. JMY608 is reader module with USB interface (HID standard). In the systems of Windows, Linux and other PC systems support USB keyboard, the reader imitates the USB keyboard to operate the card data. With our software and DIP switch, the users can set the reader if to read the number of the card or the data of the card or both. And the data can be positive sequence output or be reverse order output. Meanwhile the users can choose freely the key output such as enter, tab and so on after the output of the number and the data of the card. The default of the JMY608 is configuration mode in factory setting. If you want to let the reader work, you need cofigurate it through the software and input the configuration information to the reader. Qualifications: PCD: NXP RC400 Working frequency: 13.56MHz RF standard: ISO15693 Operating distance: 100mm SAM card slot: no Interface: USB (HID standard) Power supply: DC5V Power consumption: 180mA Dimension: 123mm*88mm*25mm Weight: about 100g Operating temperature: -25 ~ +85 centigrade Storage temperature: -40 ~ +125 centigrade |
|
» Posted by: Jinmuyu Electronics Co., Ltd [China] |
|
|
|
|
|
[Sell]
Sell 13.56MHz rfid module JMY603 Interface: UART |
|
|
This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me. JMY603 series are RFID reader/writer module with UART serial ports. JMY603 has various functions and supports multi ISO/IEC standard of contactless IC card; the cards from different suppliers. The designer combined some frequent used command of RF IC card and then user could operate the cards with full function by sending simple command to the module. The module and antenna are integrated design. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. Qualifications: Authenticated: BCTC(the Bank Card Test Center )--contactless Bank Card LEVEL 1 PCD: NXP RC500, RC531, RC632 Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 80mm (Mifare One, typical distance) Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only Auto detecting card: Supported, default OFF EEPROM: 512 Bytes Interface: UART Baud rate: 19200--115200 BPS Power supply: DC5V Power consumption: 80mA Dimension: 85mm*60mm*10mm Weight: about 25g Operating temperature: -25 ~ +85 centigrade Storage temperature: -40 ~ +125 centigrade |
|
» Posted by: Jinmuyu Electronics Co., Ltd [China] |
|
|
|
|
|
[Sell]
Supply 13.56MHz rfid module JMY602 Interface: IIC, UART, RS232C or USB |
|
|
This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me. JMY602 series are RFID reader/writer module with IIC or UART or USB ports. There are 2 SAM card slots in the module which supports SAM cards compliant with ISO7816 (T=0 and T=1). And also it supports SAM card(38400bps)which was used in domestic card management system. JMY602 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. The designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module. The module and antenna are integrated design. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. Qualifications: PCD: NXP RC500, RC531, RC632, RC400 Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 100mm (Mifare One, typical distance) Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only Auto detecting card: Supported, default OFF SAM card slot: 1 slot, 9600bps/38400bps EEPROM: 512 Bytes PPSS: supported Interface: IIC, UART, RS232C or USB (embedded CP2102 USB to RS232 converter) Baud rate: IIC: 400Kbps, UART/RS232/USB to RS232: 19200--115200 bps Max.command length: 254 Bytes /511 Bytes Power supply: DC5V Power consumption: 80mA Dimension: 100mm*70mm*10.2mm Weight: about 120g Operating temperature: -25 ~ +85 centigrade Storage temperature: -40 ~ +125 centigrade ISP: supported RoHS: Compliant |
|
» Posted by: Jinmuyu Electronics Co., Ltd [China] |
|
|
|
|
|
[Sell]
Sell 13.56MHz rfid module JMY601 Interface: UART(TTL Level)) |
|
|
This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me. JMY601 series are RFID reader/writer module with UART serial ports. JMY601 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. The RF protocol is complex. But the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module through UART interface. The module and antenna are integrated design. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. Qualifications: PCD: NXP RC531, RC632 Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 80mm(Mifare One, typical distance) Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only Auto detecting card: Supported, default OFF EEPROM: 512 Bytes Interface: UART(TTL Level) Baud rate: 19200bps--115200 bps Max.command length: 254 Bytes Interface level: 3.3V(TTL level; 5V tolerance) Power supply: DC5V Power consumption: 80mA Dimension: 60mm*60mm*5.7mm Weight: about 20g Operating temperature: -25 ~ +85 centigrade Storage temperature: -40 ~ +125 centigrade RoHS: Compliant |
|
» Posted by: Jinmuyu Electronics Co., Ltd [China] |
|
|
|
|
|
[Sell]
2.4' QVGA Screen Super Clear Subwoofer |
|
|
Mechanicals Phone Form Factor Bar phone Size (mm) 122*54.2*14.4mm Speaker :Special 42*42 Super Clear Subwoofer Other Hardware Platform Chipset MTK 6252 Frequency(MHZ) GSM/GPRS900/1800Mhz Dual GSM Dual GSM Card Display Main Display 2.4' QVGA Camera Main Camera 1.3mega Memory : Internal Memory 64Mb Nor Flash + 32Mb SRAM External Memory TF supported ,max 8G Battery Capacity(mAh) 1200mAh,compatible to NOKIA 5K Charger Type compatiable to NOKIA Connector I/O Connector USB Earphone connector according to FM function Others FM Radio Yes Bluetooth Yes USB Yes Color Black//Red/White(optional) Software Network : Support GPRS Support WAP Language: Multiple language Call: Telephone book volume support 500pcs +SIM 1 + SIM 2 Call history : 20 missed calls + 20 dialed calls + 20 received calls Handfree Support Message: Messages volume 500 items Support SMS Support MMS Others Support Games Support unit conversion Support calculator Support E-book Support zebra time Support file management Support Alarm clock Mechanicals Phone Form Factor Bar phone Size (mm) 122*54.2*14.4mm Speaker Special 42*42 Super Clear Subwoofer Other Hardware Platform Chipset MTK 6252 Frequency(MHZ) GSM/GPRS900/1800Mhz Dual GSM Dual GSM Card Display Main Display 2.4' QVGA Camera Main Camera 1.3mega Memory Internal Memory 64Mb Nor Flash + 32Mb SRAM External Memory TF supported ,max 8G Battery Capacity(mAh) 1200mAh,compatible to NOKIA 5K Charger Type compatiable to NOKIA Connector I/O Connector USB Earphone connector according to FM function Others FM Radio Yes Bluetooth Yes USB Yes Color Black//Red/White(optional) Software Network GPRS Support WAP Support Language Language Multiple language Call Telephone book volume support 500pcs +SIM 1 + SIM 2 Call history 20 missed calls + 20 dialed calls + 20 received calls Handfree Support Message Messages volume 500 items SMS Support MMS Support Others Games Support unit conversion Support calculator Support E-book Support zebra time Support file management Support Alarm clock Support |
|
» Posted by: sinophone [China] |
|
|
|
|
|
[Sell]
Sell 13.56MHz RFID Module JMY506 PCD: NXP RC522, RC523 |
|
|
This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me. JMY506 series are RFID reader/writer module with UART and IIC serial ports. JMY506 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. The RF protocol is complex. But the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module through IIC or UART interface. And the module and antenna are separate design. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. The module and antenna is linked by 50ohm coaxial line. The performance is good, though the wire can reach 10m. Normally the wire should be 60cm that is the module's best performance and stability. Qualifications: PCD: NXP RC522, RC523 Working frequency: 13.56MHz Antenna connection: by 50ohm coaxial line, (recommend 60cm, Max. 10 meters), due to order RF standard: ISO14443A, ISO14443B Operating distance: 80mm(depending on card and antenna design) Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only Auto detecting card: Supported, default OFF EEPROM: 512 Bytes Interface: IIC&UART(selected by SPS pin, recommend to use IIC) Communication rate: IIC--400Kbps, UART--19.2Kbps/115.2Kbps Max.command length: 254 Bytes Interface level: 3.3V(TTL level; 5V tolerance) Power supply: DC 5.0V Power consumption: 50mA Dimension: 42mm*21mm*8mm Package: DIP32 Weight: about 15g Operating temperature: -25 ~ +85 centigrade Storage temperature: -40 ~ +125 centigrade ISP: Supported RoHS: Compliant |
|
» Posted by: Jinmuyu Electronics Co., Ltd [China] |
|
|
|
|
|
[Sell]
sell 13.56MHz RFID Module JMY505 50ohm coaxial cable |
|
|
This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me. JMY505 series are RFID reader/writer module with UART and IIC serial ports. JMY505 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. The RF protocol is complex. But the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module through IIC or UART interface. And the module and antenna are separate design. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. The module and antenna is linked by 50ohm coaxial line. The performance is good, though the wire can reach 10m. Normally the wire should be 60cm that is the module's best performance and stability. Qualifications: PCD: MF RC500, RC531, RC632, RC400 Working frequency: 13.56MHz Antenna connection: by 50ohm coaxial line, (recommend 60cm, Max. 10 meters), due to order RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 100mm(depending on card and antenna design) Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only EEPROM: 512 Bytes Interface: IIC & UART (selected by SPS pin, recommend to use IIC) Communication rate: IIC--400Kbps, UART--19.2Kbps/115.2Kbps Max.command length: 511 Bytes Interface level: 3.3V(TTL level; 5V tolerance) Power supply: DC 5.0V Power consumption: 70mA Dimension: 42mm*21mm*8mm Package: DIP32 Weight: about 15g Operating temperature: -25 ~ +85 centigrade Storage temperature: -40 ~ +125 centigrade ISP: Supported RoHS: Compliant |
|
» Posted by: Jinmuyu Electronics Co., Ltd [China] |
|
|
|
|
|
[Sell]
sell 13.56MHz rfid module JMY504 PCD: NXP RC522, RC523 |
|
|
This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me. JMY504 series are RFID reader/writer module with UART and IIC serial ports. JMY504 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. The RF protocol is complex. But the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module through IIC or UART interface. And the module and antenna are separate design. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. The module and antenna is separate design. 4 wires are linked the antenna and module. Normally the wire should be less than 200mm, or it will affect the module's performance and stability. Qualifications: PCD: NXP RC522, RC523 Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B Operating distance: 80mm(depending on card and antenna design) Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only Auto detecting card: Supported, default OFF EEPROM: 512 Bytes Interface: IIC & UART (selected by SPS pin, recommend to use IIC) Communication rate: IIC 400Kbps, UART 19.2Kbps/115.2Kbps Max.command length: 254 Bytes Interface level: 3.3V(TTL level; 5V tolerance) Power supply: DC 5.0V Power consumption: 50mA Dimension: 42mm*21mm*8mm Package: DIP32 Weight: about 15g Operating temperature: -25 ~ +85 centigrade Storage temperature: -40 ~ +125 centigrade ISP: Supported RoHS: Compliant
|
|
» Posted by: Jinmuyu Electronics Co., Ltd [China] |
|
|
|
|
|
[Sell]
sell 13.56MHz RFID Module JMY501 Interface: IIC & UART |
|
|
This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me.------ JMY501 series are RFID reader/writer module with UART and IIC serial ports. JMY501 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. The RF protocol is complex. But the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module through IIC or UART interface. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. The module and antenna is separate design. 4 wires are linked the antenna and module. Normally the wire should be less than 200mm, or it will affect the module's performance and stability. Qualifications: PCD: NXP RC500, RC531, RC632, RC400 Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 100mm(depending on card and antenna design) Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only Auto detecting card: Supported, default OFF EEPROM: 512Bytes Interface: IIC & UART (selected by SPS pin, recommend to use IIC) Communication rate: IIC--400Kbps, UART--19200bps/115200bps Max.command length: 511 Bytes Interface level: 3.3V (TTL level; 5V tolerance) Power supply: DC5V Power consumption: 70mA Dimension: 42mm*21mm*8mm Package: DIP32 Weight: about 15g Operating temperature: -25 ~ +85 centigrade Storage temperature: -40 ~ +125 centigrade ISP: Supported RoHS: Compliant |
|
» Posted by: Jinmuyu Electronics Co., Ltd [China] |
|
|
|
|
|
[Sell]
sell 13.56MHz rfid reader MR600 LED Nixie Tube |
|
|
This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me. MR600 series contactless smart reader is the desktop reader bases on NXP PCD or compatible PCD. The reader inlays LED Nixie tube which displays 8 numbers. The reader fully supports the IC card according to ISO14443A, ISO14443B, ISO15693 and ISO7816(T=0 & T=1); Various contactless IC card under international standard. The reader embeds SAM card slot. We do the optimization for application of domestic card system and so it can support fully SAM card according to ISO7816 (9600bps & 38400bps). Qualifications: PCD: NXP RC500, RC531, RC632, RC400; FM1722 Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 80mm (Mifare One, typical distance) SAM card slot: 1 slot, Supported: ISO7816 T=0, Supported: 9600bps&38400bps Interface: RS232C or USB (build-in USB to UART converter) Baud rate: 9600 ~ 115200 bps Power supply: DC5V Power consumption: 1.5W Dimension: 141mm*100mm*31mm Weight: about 100g Operating temperature: -25 ~ +85 centigrade Storage temperature: -40 ~ +125 centigrade |
|
» Posted by: Jinmuyu Electronics Co., Ltd [China] |
|
|
|
|
|
[Sell]
sell 13.56MHz rfid reader MR730 Interface: Ethernet RJ45 |
|
|
This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me. MR730 series contactless smart reader is the Ethernet interface desktop reader based on NXP PCD or compatible PCD. It doesn't have display. The reader supports series IC cards according to ISO14443 & ISO15693; various contactless IC card under international standard; especially the contactless CPU cards under ISO14443-4. Meanwhile the reader is available to pass EMV2000 and PBOC 2.0 and be authenticated by many laboratories--Visa Wave & Pay Pass (by FIME) and the Bank Card Test Center. The reader embeds SAM card slot. We do the optimization for application of domestic payment system and so it can support fully SAM card under 9600bps & 38400bps. Qualifications: PCD: NXP RC500, RC531, RC632, RC400; FM1722 Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 80mm (Mifare One, typical distance) SAM card slot: 1 slot, supported ISO7816 T=0, supported 9600bps&38400bps Interface: Ethernet RJ45 Baud rate: 9600 ~ 115200 BPS Power supply: DC5V Power consumption: 1.5W Dimension: 141mm*100mm*31mm Weight: about 100g Operating temperature: -25 ~ +85 centigrade Storage temperature: -40 ~ +125 centigrade |
|
» Posted by: Jinmuyu Electronics Co., Ltd [China] |
|
|
|
|
|
[Sell]
sell rfid 13.56MHz reader MR761 PCD: NXP RC522, RC523 |
|
|
This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me. MR761 series, based on NXP PCD, is the desktop reader. The reader supports series IC cards according to ISO14443A, ISO14443B and outputs the data by the way of simulation keyboard through USB interface. MR761 IC card is desktop reader with USB interface (HID standard). In the systems of Windows, Linux and other PC systems support USB keyboard, the reader imitates the USB keyboard to operate the card data. With our software and DIP switch, the users can set the reader if to read the number of the card or the data of the card or both. And the data can be positive sequence output or be reverse order output. Meanwhile the users can choose freely the key output such as enter, tab etc. after the output of the number and the data of the card. The default of the MR761 is configuration mode in factory setting. If you want to let the reader work, you need deploy it through the software and input the configuration information to the reader. The reader embeds 2 SAM card slots. If the users need read the SAM card and use the SAM to cooperate with the operation, and then you can contact us, we will help you do the job. Qualifications: PCD: NXP RC522, RC523 Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B Operating distance: 80mm (Mifare One, typical distance) SAM card slot: 2 slots, (supported ISO7816 T=0 and T=1) Interface: USB (HID standard) Power supply: DC5V Power consumption: 0.6W Dimension: 123mm*88mm*25mm Weight: about 100g Operating temperature: -25 ~ +85 centigrade Storage temperature: -40 ~ +125 centigrade
|
|
» Posted by: Jinmuyu Electronics Co., Ltd [China] |
|
|
|
|
|
[Sell]
sell 13.56MHz rfid reader MR760 USB (HID standard) |
|
|
This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me. MR760 series, based on NXP SL RC400,RC632 are the desktop reader. The reader supports series IC cards according to ISO15693,ISO14443A, ISO14443B and the reader imitates the USB keyboard to read and output the card data. MR760 IC card is desktop reader with USB interface (HID standard). In the systems of Windows, Linux and other PC systems support USB keyboard, the reader imitates the USB keyboard to operate the card data. With our software and DIP switch, the users can set the reader if to read the number of the card or the data of the card or both. And the data can be positive sequence output or be reverse order output. Meanwhile the users can choose freely the key output such as enter, tab etc. after the output of the number and the data of the card. The default of the MR760 is configuration mode in factory setting. If you want to let the reader work, you need deploy it through the software and input the configuration information to the reader. We monitor the quality of the products strictly by the introduction of advanced equipment, to ensure that the reader has good quality and stability. Qualifications: PCD: NXP RC400,RC632 Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 100mm (I.CODE SLI, typical distance) SAM card slot: no Interface: USB (HID standard) Power supply: DC5V Power consumption: 0.6W Dimension: 123mm*88mm*25mm Weight: about 150g Operating temperature: -25 ~ +85 centigrade Storage temperature: -40 ~ +125 centigrade |
|
» Posted by: Jinmuyu Electronics Co., Ltd [China] |
|
|
|
|
|
[Sell]
sell 13.56MHz rfid reader MR780 Interface: RS232C or USB |
|
|
This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me. MR780 series, based on NXP PCD or compatible PCD, is popular and high performance desktop reader. The reader supports series IC cards according to ISO14443, ISO15693; various contactless IC card under international standard; especially the contactless CPU cards under ISO14443-4. Meanwhile the reader is available to pass EMV2000 and PBOC 2.0 and be authenticated by many laboratorial certifications---Visa Wave & Pay Pass (by FIME) and the Bank Card Test Center. There are 3 SAM card slots in the reader(T=0 and T=1). The reader supports card-reset of various communication rate; PPSS operation after card-reset. Qualifications: PCD: NXP RC500, RC531, RC632, RC400; FM1722 Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 100mm (Mifare One, typical distance) SAM card slot: 3 slots, (supported ISO7816 T=0 and T=1) Interface: RS232C or USB (build-in CP2102 USB to UART converter) Baud rate: 9600--115200 BPS Power supply: DC5V Power consumption: 0.9W Dimension: 123mm*88mm*25mm Weight: about 100g Operating temperature: -25 ~ +85 centigrade Storage temperature: -40 ~ +125 centigrade
|
|
» Posted by: Jinmuyu Electronics Co., Ltd [China] |
|
|
|
|
|
[Sell]
sell 13.56MHz rfid reader MR810 MCU: ARM7 |
|
|
This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me. MR810 series, based on NXP PCD, are the USB PC/SC interface smart reader. The reader supports series IC cards according to ISO14443A, ISO14443B, ISO15693 and ISO7816; various contactless IC card under international standard; especially the contactless CPU cards under ISO14443-4. Meanwhile the reader is available to pass EMV2000 and PBOC 2.0 and be authenticated by many laboratorial certifications---Visa Wave & Pay Pass (by FIME) and the Bank Card Test Center. There are 2 SAM card slots in the reader which support SAM cards compliant with ISO7816 (T=0 and T=1). The reader supports card-reset of various communication rate; PPSS operation after card-reset; SAM operation of various communication rate. Qualifications: PCD: NXP RC531, RC632 Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 100mm (Mifare One, typical distance) Operating distance: 2 slots, (supports ISO7816 T=0 and T=1) Interface: USB PC/SC Power supply: DC5V Power consumption: 0.9W Dimension: 123mm*88mm*25mm Weight: about 100g Operating temperature: -25 ~ +85 centigrade Storage temperature: -40 ~ +125 centigrade |
|
» Posted by: Jinmuyu Electronics Co., Ltd [China] |
|
|
|
|
|
[Sell]
sell 13.56MHz rfid reader MR800 Interface: USB PC/SC |
|
|
This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me. MR800 series for reader/writer with the popular ARM7 microprocessors are of rapid & stable, reliable operation and beautiful appearance. User can choose freely if with the LCD display modul(128x64). They support boot screen & idle screen set and picture storage etc. The interface is USB PC/SC. They can be directly used the Windows operating system with driver and the API functions. The development cycle simple and short. The reader not only supports series IC cards according to ISO14443 TypeA/B, ISO15693 but also SAM cards compliant with ISO7816 (T=0 and T=1). Qualifications: PCD: NXP RC531, RC632; RC400, RC500(select) Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 100mm (Mifare One, typical distance) SAM card slot: 2 slots, (supports ISO7816 T=0 and T=1) Interface: USB PC/SC Power supply: USB DC5V Power consumption: 0.9W LED: four LED (red, green, blue, yellow) Dimension: 123mm*88mm*25mm Weight: About 200g Operating temperature: -25 ~ +85 centigrade Storage temperature: -40 ~ +125 centigrade
|
|
» Posted by: Jinmuyu Electronics Co., Ltd [China] |
|
|
|
|
|
[Sell]
Sell Nextel i455 Housing/Lcd/Flex Cable/Keypad With [High Quality And Best Service] [http://www.367net.com] |
|
|
[ http://www.367net.com ] Can [Supply Offer Trade Sell] [100% New Original/Oem] Nextel i455 Housing/Lcd/Flex Cable/Keypad With [High Quality And Best Service] to You In China,large Volumes in Stock,On-Time Delivery,Free Shipping. Contact us and Order Now! Contact: Mark [ Cell ] +86-15999766566 [ Tel ] +86-769-85395956,85432002,85432001 [Fax]: +86-769-85385440 or [email] SLC@367net.com, [MSN]: slc010501@hotmail.com [ Homepage ]: http://www.367net.com |
|
» Posted by: Slc(HK) Development Co.,Ltd [China] |
|
|
|
|
|
[Sell]
Launch X431 diagun |
|
|
Launch X431 diagun Email address:amanda@autoltech.com MSN:autolsale004@hotmail.com Yahoo ID:chenautolsale004@yahoo.com Skype: autolsale004 Website: http://www.autoltech.com/ Overview The Launch x-431 Diagun diagnostic tool from Launch features a compact main unit, powerful diagnostic functions and fast boot up. The unit offers high-resolution display with wireless and direct cable connectivity. 1. Compact main unit, lightweight and portable. 2. The only diagnostic tool which can work on two vehicles at the same time 3. Bluetooth technology, wireless communication enables 300-ft range 4. Universal 16-pin connector 5. Fully inherited diagnostic functions from X-431 for American, Asian, and European vehicle makes. 6. Greatly improved program running speed. 7. Convenient software update. 8. 4.3 inch high luminance, high resolution color touch screen 9. 1530mAh Rechargeable battary 10. 1G memory card 11. Standard USB printer connector, external printer support Coverage BENZ, BMW, Volkswagen, Audi, Skoda, Seat, Volvo, Citroen, Peugeot, Fiat,Opel, Europe Ford, Fiat, Opel,Europe Ford, Landrover, Renault, Rover, Saab, Transporter&V-Class, VAZ, JAGUAR, America Ford, GM, Chrysler, CHEVY,Toyota, Nissan, Honda, Mitsubishi,Mazda,JPIsuzu,Suzuki, Subaru, Daihatsu, Daewoo, Hyundai, Kia, Ssangyong, Holden, Tata, Brazil GM, BYD,Zotye,Changhe, Chang’an, Chery, HaFei,Tianjing Yiqi,Zhongxing, GreatWall, Geely,Liuzhou Wuling, JAC, Smart OBDII,DEMO...... Functions It covers the basics: read & erase DTCs, read datastream in graph or digit format It provides advanced functions: actuation tests And it is updated frequently: Launch makes updates available on an almost weekly basis. Functions include: 1 CAN Enabled Tool (no adapters to buy) 2 Global 0BD-II (American, Asian, European) 3 0BD-II Generic Diagnostic Trouble Codes 4 Manufacturer Specfic Diagnostic Trouble Codes 5 Manufacturer Enhanced Diagnostic Trouble Codes 6 Generic Data Stream 7 Graph Data Stream 8 Enhanced Datastream 9 OBD- II Enhanced 10 OBD-I 11 American Non-Engine Coverage 12 Asian 0BD-II Enhanced 13 Asian 0BD-I 14 Asian Non-Engine Coverage 15 European OBD-II Enhanced 16 European 0BD-I 17 European Non-Engine Coverage 18 Enhanced Help Screens 19 Module Coding 20 Adaptive Resets 21 Bi-directional Tests 22 Software Updates 23 Cables & Connectors includes Super-16 24 Key Programming 25 Immobilizer 26 Adaptive Resets
|
|
» Posted by: Autol Technology Co., Limited [China] |
|
|
|
|
|
[Sell]
Launch X431 Master |
|
|
Launch X431 Master Email address:amanda@autoltech.com MSN:autolsale004@hotmail.com Yahoo ID:chenautolsale004@yahoo.com Skype: autolsale004 Website: http://www.autoltech.com/ Overview X431 Master Includes the OBD2 16E (aka Super-16) connector which integrates the function of all 16-pin connectors of the x431. 24v operating voltage capability is added to work with different kinds of batteries. Its smart design makes it easier and more convenient to operate than X-431. It is capable of reading DTCs, reading datastream, actuation test,sensor waveform display and ECU coding. Features 1 Inherited all diagnosis functions of the original X-431 2 Faster communication than the original X-431 3 All inclusive software coverage - European, America, Brazil, Australia, Russia, and Asian 4 24V operating voltage capability is added to work with different kinds or batteries 5 Powerful diagnostic function: read DTCs, read datastream, actuation test, sensor waveform display, and ECU coding 6 Test most cars by using the unique & integrated 16-pin connector 7 Upgrade software anytime and anywhere to keep up with latest models 8 Multi-language available Coverage BENZ, BMW, Volkswagen, Audi, Skoda, Seat, Volvo, Citroen, Peugeot, Fiat, Opel,Europe Ford, Landrover, Renault, Rover, Saab, Transporter&V-Class, VAZ, JAGUAR,America Ford, GM, Chrysler, CHEVY,Toyota, Nissan, Honda, Mitsubishi, Mazda, JPIsuzu,Suzuki, Subaru, Daihatsu, Daewoo, Hyundai, Kia, Ssangyong, Holden, Tata, Brazil GM, BYD,Zotye,Changhe, Chang’an, Chery, HaFei,Tianjing Yiqi,Zhongxing, GreatWall, Geely,Liuzhou Wuling,JAC, Smart OBDII,DEMO...... Functions It covers the basics: read & erase DTCs, read datastream in graph or digit format It provides advanced functions: actuation tests And it is updated frequently: Launch makes updates available on an almost weekly basis. Functions include: 1 CAN Enabled Tool (no adapters to buy) 2 Global 0BD-II (American, Asian, European) 3 0BD-II Generic Diagnostic Trouble Codes 4 Manufacturer Specfic Diagnostic Trouble Codes 5 Manufacturer Enhanced Diagnostic Trouble Codes 6 Generic Data Stream 7 Graph Data Stream 8 Enhanced Datastream 9 OBD- II Enhanced 10 OBD-I 11 American Non-Engine Coverage 12 Asian 0BD-II Enhanced 13 Asian 0BD-I 14 Asian Non-Engine Coverage 15 European OBD-II Enhanced 16 European 0BD-I 17 European Non-Engine Coverage 18 Enhanced Help Screens 19 Module Coding 20 Adaptive Resets 21 Bi-directional Tests 22 Software Updates 23 Cables & Connectors includes Super-16 24 Immobilizer 25 Adaptive Resets
|
|
» Posted by: Autol Technology Co., Limited [China] |
|
|
|
|
|
[Sell]
High Efficacy Led Panel Light 600*600mm |
|
|
Product Type:MP0606C-40 Input Voltage:100~240VAC、50/60HZ Input Power:40±5% W Power Factor:>0.9 Initial Luminous Flux:>3100 lm Color Rendering Index:≥70 Average Beam Angle:>120°.. Color Temperature:2700K、4500K、6000K Life Times:50000 H Working Environ:-35~+55℃.. Store Environ:-40~+80℃.. IP Rating:IP 54 Lamp Size:595X595X9mm Lamp Weight:4 Kg Packing Specification:5 PCS/box MARILITE LED Flat Panel is an ideal retrofit solution for T5&T8 fluorescent louver fitting application in the commercial lighting .It delivers huge energy saving and low maintenance costs without any compromise on brightness. The Edgelit LED Flat Panels are designed for installation into T-bar grid(drop)celling.Fully dimmable options and compatible with building controls,motion sensors ,times and day light harvesing systems .The luminaries produces and even,consistent shadow-free illumination with no glare. With a power factor of more than 98 percent ,the LED Flat panels operate on 85-265-input voltage.produced with Environmentally friendly materials ,with no Mercury and other hazardous materials and offer a long potential life of 50,000 hours. The Luminaries deliver a high lumen output and excellent colour rendering index(cri)85,while minizing maintenance time and cost.The LED Flat panels are CETL,FCC,CE&ROHS compliant Panelite series Panelite Pro.1 Generation:80lm/W Panelite Pro series Ceiling Flat .Panel is the new generations products for commercial application ,which is based on the outstanding light efficiency.Its high output lumen can be satisfied with all kind of commercial demands. Features: 1.High performance :80lm/w 80lm/w lumen efficiency makes the panel saving 50% energy than the traditional T5 Grill Light ,higher light efficiency ,lower power consumption. 2.Advanced design :thinner and lighter :Only 9MM thickness &4.5kgs weight,and comfortable feel,make the installation more like a cork. 3.Special round corner design(patent design):Patent's round comer connector design give not only the beauty and safety ,but also high productivity to the panel 4.Colorful frames optional :Different colors of the frame options make the panel and its using environment melded. Functions: 1.Dimmable Function :Dimmable LED panel light can be adjusted to any brightness you need by the controller .Adjust the suitable brightness,comfort your eyes . 2.CCT&Dimmable Function :CCT and Dimmable LED panel light not only can you adjust the color temperature to follow your mood ,but also can creat the different atmospheres by adjusting the brightness 3.Emergency Light Function:When power supply is interrupted ,the large volumn rechargeable li-battery on the emergency panel light can maintain the light continuous .Which is the best back up for emergencies . Panelite Series Panelite Pro.2 Generation:100lm/W Panelite Pro series Ceiling Flat .Panel is the new generations products for commercial application ,which is based on the outstanding light efficiency.Its high output lumen can be satisfied with all kind of commercial demands. Features: 1.High performance :100lm/w 100lm/w lumen efficiency makes the panel saving 50% energy than the traditional T5 Grill Light ,higher light efficiency ,lower power consumption. 2.Advanced design :thinner and lighter :Only 9MM thickness &4.5kgs weight,and comfortable feel,make the installation more like a cork. 3.Special round corner design(patent design):Patent's round comer connector design give not only the beauty and safety ,but also high productivity to the panel 4.Colorful frames optional :Different colors of the frame options make the panel and its using environment melded. Functions: 1.Dimmable Function :Dimmable LED panel light can be adjusted to any brightness you need by the controller .Adjust the suitable brightness,comfort your eyes . 2.CCT&Dimmable Function :CCT and Dimmable LED panel light not only can you adjust the color temperature to follow y |
|
» Posted by: Shenzhen Mary Lighting Photoelectricity Co.,Ltd [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 next»
|
|
|