|
|
|
|
|
|
[Sell]
AMWEI Linear PTC Thermistors, Silicon temperature sensors |
|
|
Linear PTC Thermistor (LPTC) resistance increases with the temperature rises in linearity, displays a virtually linear positive temperature coefficient over their entire temperature range, suitable in measurement and control system, temperature compensation. As the construction material is mainly semiconductor monocrystalline silicon, also called silicon temperature sensor, silicon thermistor, sometimes referred to as silistors. As the temperature coefficient is positive, the silicon temperature sensors exhibit fail-safe operation when a system overheats. Furthermore silicon is inherently stable, so silicon temperature sensor are extremely reliable and have very long operational lifetimes. Hermetically sealed glass package, axial leaded, 2 leads, can operate in high temperature and moisture environment. Linear PTC thermistor in small dimension, tightness, convenient for automatic installation. AMWEI Linear PTC Thermistor (LPTC) Features: 1. Silicon temperature sensors have a TK (temperature coefficinet) which is nearly constant over the complete temperature range. Temperature coefficient:α25/50≥0.7%/C. 2. Excellent long term stability, annual diversification rate≤0.01C/per year, temperature drifts during the lifetime of silicon temperature sensor are negligible. 3. Thermal Time Constant: 10 seconds max in still air. 4. Operating temperature range:-40C--+150C. 5. Dissipation factor:2.5--5mW/C. 6. Maximum operating current:Iopr=1.0mA. 7. Rated power:10mW. 8. Resistance at 25C optional 600, 1000, 1600, 2000 ohm. Silicon temperature sensor Application: Industrial auotomation control equipment. Home appliance temperature detection and compensation. Precision circuit and crystal oscillator temperature compensation. Temperature compensation of silicon semiconducting devices. Temperature compensation of instrumentation amplifier. A/D converter temperature compensation. · Micro motor timing control. Automobile temperature detection and control. Medical equipment temperature detection and control. Linear PTC thermistor applications also include transmission, engine oil and coolant, heating system, overheating protection, amplifiers, power supplies, transducers, telemetry, computers, magnetic amplifiers, thermometry, meteorology, temperature regulation and over-temperature protection. |
|
» Posted by: AMWEI Thermistor [China] |
|
|
|
|
|
[Sell]
Canon-PG-830 |
|
|
ink cartridge.canon-PG-830 Procut No.:PG-830 Color:Black Series:Canon Type: Reman ink volume: 7ml printer models: PIXMA iP1180 PIXMA iP1880 PIXMA iP1980 PIXMA iP2580 PIXMA iP2680 PIXMA MP145 PIXMA MP198 PIXMA MP228 PIXMA MP476 PIXMA MX308 PIXMA MX318 |
|
» Posted by: Ronghao photoelectricity technology Co.,LTD [China] |
|
|
|
|
|
[Sell]
Fused Sillica Windows |
|
|
Fused Sillica Windows Fused silica is formed by chemical combination of silicon and oxygen. Advantages of fused silica material include good UV and IR transmission, low thermal expansion, providing stability and resistance to thermal shock over large temperature excursions, wider thermal operating range and high laser damage threshold. Used for windows, lenses, prisms and mirror substrates. Specifications: Material: UV grade Fused Silica Dimension Tolerance: +0.0, -0.1mm Thickness Tolerance: ± 0.1mm Surface quality: 60/40(Standard), 10/5(High Precision) Clear Aperture: >85% Flatness: λ(Standard), λ/10(High Precision) per 25mm@633nm Parallelism: 1' (Standard), 10" (High Precision) Bevel: <0.25mm X 45° Coating: Upon requirement Typical Sizes: Round Shape Diameter(mm): Φ5.0;Φ10.0 ;Φ12.7;Φ15.0;Φ20.0; Φ25.4;Φ30.0;Φ38.1;Φ50.8;Φ76.2 Square Shape: WxH(mm) 5.0x5.0 ;10.0x10.0 ;15.0x15.0 ; 20.0x20.0;25.0x25.0;50.0x50.0 Thickness(mm): 0.5;1.0;1.5;2.0;3.0; 4.0;5.0;6.0;8.0;10.0 How to order Windows? Example: Material:N-BK7 Diameter:Φ25.4+0.0/-0.1mm Thickness:1.0±0.1mm Surface quality: 60-40 S/D Flatness: λ/2 per 25mm @633nm Paralelism: <1 arc minute Coating:Both side AR,R<0.25% @1064nm, AOI=0° Beamsplitter Cubes Beamsplitter Plates Polarization Beamsplitters Beam Splitting coating Dielectric High Reflection Coating Dual-Wavelength Anti-reflection coating Metallic High Reflection Coating Multilayer Broadband Anti-reflection Coating MultiLayer Sharp “V” Anti-reflection coating Partial Reflection Coating Single Layer MgF2 Anti-reflection Coating Cr4+YAG Crystal KTP crystal Nd YAG Crystal Bandpass Filters Birefringent Filters Colored glass Filters Achromatic Lenses(Doublets) Ball Lenses Bi-Concave Lenses Bi-Convex Lenses Meniscus Lenses Plano-Concave Cylindrical Lenses Plano-Concave Lenses Plano-convex Cylindrical Lenses Plano-Convex Lenses Powell Lenses Rods Lenses(Light pipes) B-270 BK7 Glass Float Glass Fused Silica Dielectric Mirrors Hot&Cold Mirror Metallic Coated Mirrors (Al, Ag, Au) Corner retroreflectors(Corner Cube Prisms) Dove Prisms Equilateral Dispersing Prisms Penta Prisms Right Angle Prisms Special prisms Wedge Prisms Multiple order Waveplates True Zero order Waveplates Zero order Waveplates BK7 Windows CaF2 Windows Fused Sillica Windows Ge Windows MgF2 windows Sapphire Windows Si Windows optical windows optical lenses optical prisms optical beamsplitters optical mirrors optical filters optical waveplates optical crystals optical coating
|
|
» Posted by: [] |
|
|
|
|
|
[Sell]
Dielectric Mirrors |
|
|
Dielectric Mirrors Dielectric Mirrors offer near total reflection, minimizing losses in nearly all optical systems. These coatings are very durable, easily cleaned, and resistant to laser damage. Available either broadband or narrowband, they operate efficiently over 0–45°angle of incidence: AOI=0°, R>99.8%; AOI=45°, R>99.5% (Rs>99.9%, Rp>99.2%). Specifications: Material: N-BK7 or UV Fused Silica Dimension Tolerance: +0.0, -0.1mm Thickness Tolerance: ± 0.1mm Surface quality: 60/40(Standard), 10/5(High Precision) Clear Aperture: >85% Flatness: λ/4 per 25mm@633nm Parallelism: <1' Bevel: <0.25mm X 45° Coating: One surface(S1) :HR @ design wavelength The other surface :uncoated Typical Sizes: Size(mm) Size(mm) Φ5.0x1.0 10.0x10.0x3 φ10.0x2.0 20.0x20.0x3 Φ12.7x2.0 25.4x25.4x3 Φ15.0x3.0 30.0x30.0x5 other sizes and shapes are available.
|
|
» Posted by: [] |
|
|
|
|
|
[Sell]
Colored glass Filters |
|
|
Cut-off type colored optical filter glass The glass is named based on spectral characteristic of which is represented by the wavelength transmission limit. For example, if the transmission limit of glass is 490nm,then it is named as JB490.There are five groups and 35types glasses. Selective absorption colored optical filter glass This part of the glasses can be divided into 14 kinds and 78 types based on the color and application in this catalogue. The types are arranged in accordance with serial numbers, which have no special meaning. Neutral filter glass They are named based on the average transmissivity characteristics in 400nm to 700nm wavelength with 2mmthick sampler is 70%,then it's named as ZAB70.And there are ten types of glasses in this part. But three types of them(ZAB65,ZAB30,ZAB5)are tested in 440nm-660nm wavelength. Specifications: Material: Color glass Dimension Tolerance: +0.0, -0.2mm Thickness Tolerance: ±0.2mm Surface quality: 80/50 Clear Aperture: >85% Flatness: 1 λ per 25mm@633nm Parallelism: ±3' Bevel: <0.25mm X 45° Coating: Upon requirement Typical Sizes: Size(mm) Size(mm) Φ5.0x1.0 Φ20.0x3.0 φ10.0x2.0 Φ25.4x3.0 Φ12.7x2.0 Φ50.8x3.0 Φ15.0x3.0 Φ76.2x5.0 Other sizes and shapes are available.
|
|
» Posted by: [] |
|
|
|
|
|
[Sell]
Birefringent Filters |
|
|
Birefringent filter is made by crystal quartz. It's used in the laser cavity for wavelength selection. We can provide different thickness birefringent filter for our customer's laser applications. Specifications: Material: Crystal quartz Dimension Tolerance: +0.0, -0.2mm Thickness Tolerance: ± 0.02mm Surface quality: 20/10 Clear Aperture: 90% of the central area Parallelism: <5 arc sec
|
|
» Posted by: [] |
|
|
|
|
|
[Sell]
Bandpass Filters |
|
|
Bandpass filter plate are divided into short-pass and long-pass filters according to whether they transmit below or above the transition wavelength. The transition wavelength or cut-on/off wavelength is the wavelength at which the transmission is 50% of its peak value. Specifications: Material: N-BK7 ;Fused silica Dimension Tolerance: +0.0, -0.1mm Thickness Tolerance: ±0.1mm Surface quality: 60/40 Clear Aperture: >85% Parallelism: λ /4 per 25mm@633nm Bevel: ±3' Coating: One surface(S1) :HR & HT The other surface(S2):Upon requirement
|
|
» Posted by: [] |
|
|
|
|
|
[Sell]
Nd: YAG Crystal |
|
|
Neodymium Doped Yttrium AIuminum Garnet (Nd: YAG) Crystal Nd: YAG crystal is the most widely used solid-state laser material today. Now, we are able to stably supply quantity of Nd: YAG rods with high optical homogeneity, consistent performance, high processing accuracy and on time delivery. 1. Basic Properties (1.0 atm% Nd doped) Chemical Formula Nd:Y3Al5O12 Crystal Structure Cubic Lattice Constants 12.01 Å Concentration ~ 1.2 x 1020 cm-3 Melting Point 1970 oC Density 4.56 g/cm3 Mohs Hardness 8.5 Refractive Index 1.82 Thermal Expansion Coefficient 7.8 x 10-6 /K [111], 0 - 250 oC Thermal Conductivity 14 W/m /K @20 oC, 10.5 W /m /K @100 oC. Lasing Wavelength 1064 nm Stimulated Emission Cross Section 2.8x10-19 cm-2 Relaxation Time of Terminal Lasing Level 30 ns Radiative Lifetime 550 ms Spontaneous Fluorescence 230 ms Loss Coefficient 0.003 cm-1 @ 1064 nm Effective Emission Cross Section 2.8 x 10-19 cm2 Pump Wavelength 807.5 nm Absorption band at pump wavelength 1 nm Linewidth 0.6 nm Polarized Emission Unpolarized Thermal Birefringence High 2. Standard Products specification Dopant Concentration (atomic %): 0.9%~ 1.1% Orientation: <111> crystalline direction (±5o) Wavefront distortion:l/8 per inch, measured by a double-pass interferometer @ 633 nm Extinction Ratio: Rods with diameter from 3 mm to 6.35 mm and with length to 100 mm:>30dB Rods with diameter from 7 mm to 10 mm and with length to 100 mm:>28dB Dimension Tolerances Rods with diameter: ±0.025 mm (±0.001"), Length: ±0.5 mm (±0.02") Barrel Finish:50 80 micro-inch (RMS) , grooved rod barrel are also available Ends Finish: Surface Figure: <l/10 @ 633 nm Parallelism: < 10 arc seconds Surface quality:< 5 arc minutes Clear Aperture: > 10/5 Scratch / Dig per MIL-O-1380A chamfer:<0.1 mm @ 45° clear Aperture: extend over the entire faces to the chamfered edges Anti-Reflection Coating: Single layer MgF2 coating with high damage threshold for high power laser operation. Reflectivity R < 0.25% @ 1064 nm per surface. Damage threshold over 750 MW/cm2@ 1064nm, 10 ns and 10 HZ. High-Reflection Coating: Standard HR coating with R>99.8% @ 1064nm and R<5% @ 808nm can be performed in WTS. Other HR coatings, such as HR @ 1064/532 nm, HR @ 946nm, HR 1319 nm and other wavelengths are also available. Standard products in-stock: The standard Nd: YAG laser rod with dimension of f3x5 mm and f4x50 mm with AR or HR- coating for Diode Pumped Solid State Lasers (DPSS) are ready for immediate delivery. For more information about standard Nd: YAG rods please refer to page 62 of Diode Pumped Laser Optics Kits. Note:Higher grade or specific Nd: YAG rods or slabs are also available upon request.
|
|
» Posted by: [] |
|
|
|
|
|
[Sell]
KTP crystal |
|
|
Potassium Titanyl Phosphate (KTiOPO4 or KTP) Advantages: Large Nonlinear Optical (NLO) Coefficients Wide Angular Bandwidth and Small Walk-off Angle Broad Temperature and Spectral Bandwidth High Electro-Optic (E-O) Coefficient and Low Dielectric Constant Large Figure of Merit for an Optical Waveguide Modulator Nonhygroscopic, Good Chemical and Mechanical Properties Applications: Frequency Doubling (SHG) of Nd-doped Lasers for Green/Red Output. Frequency Mixing (SFM) of Nd Laser and Diode Laser for Blue Output. Parametric Sources (OPG, OPA and OPO) for 0.6mm-4.5mm Tunable Output. E-O Modulators, Optical Switches, Directional Couplers. Optical Waveguides for Integrated NLO and E-O Devices. DND Provides: Standard size of KTP crystal for DPSS application; Strict Quality Control; 2 - 3 Weeks Delivery; Unbeatable Price and Special OEM Discount; Free Technical Support; AR-Coating, Mounting and Re-polishing Service; Mass Production to Support Industrial and Commercial Applications; New: Precision Oven εt Temperature Controller for Heating KTP. Basic Properties 1. Structural and Physical Properties Crystal Structure Orthorhombic, point group mm2 Cell Parameters a = 6.404Å, b = 10.616Å, c = 12.814Å Z = 8 Melting Point 1172 oC Incongruent Curie point 936 oC Mohs Hardness » 5.0 Density 3.01g/cm3 Linear Absorption Coefficients a <0.001 cm-1 @ l =1064 nm or 532 nm Hygroscopic Susceptibility no Relative Dielectric Constant eeff=13 Specific heat 0.1643 cal/g.oC Electrical conductivity 3.5x10-8 s/cm (c-axis, 22oC, 1KHz) Thermal Conductivity 13W/m/K 2. Linear Optical Properties Transparency Range: 350 - 4500 nm, See Transparency Curve KTP Transparency Curve Refractive Indices: Wavelength nx ny nz 1064 nm 1.7377 1.7453 1.8297 532 nm 1.7780 1.7886 1.8887 Therm-Optic Coefficients: dnx/dT=1.1x10-5/oC dny/dT=1.3x10-5/oC dnz/dT=1.6x10-5/oC Sellmeier Equations: n2x=3.0065+0.03901/(l2-0.04251)-0.01327l2 n2y=3.0333+0.04154/(l2-0.04547)-0.01408l2 n2z=3.3134+0.05694/(l2-0.05658)-0.01682l2 3. NonLinear Optical Properties Phase-Matchable Output Range: 492- 1700 nm NLO Coefficients: d31=2.54pm/V, d32=4.35pm/V, d33=16.9pm/V d24=3.64pm/V, d15=1.91pm/V at 1064 nm deff(II)» (d24 - d15)sin2fsin2q - (d15sin2f + d24cos2f)sinq Electro-Optic Coefficients: Low Frequency (pm/V) High Frequency(pm/V) g13 9.5 8.8 g23 15.7 13.8 g33 36.3 35.0 g51 7.3 6.99 g42 9.3 8.8 Applications for SHG and SFG of Nd: lasers KTP is the most commonly used material for frequency doubling of Nd: YAG lasers and other Nd-doped lasers, particularly at the low or medium power density. The following Table lists the major NLO properties of KTP for frequency-doubling of Nd: YAG laser. PM angle q=90o, f=23.5o, where q & f are polar angles referring to Z and X. Effective SHG coefficient deff » 8.3xd36(KDP) Angular acceptance 20 mrad-cm Temperature acceptance 25oC-cm Spectral acceptance 5.6 Å-cm. Walk-off angle 4.5mrad (0.26o) Optical damage threshold > 450MW/cm2, (@ 1.06mm, 10ns, 10Hz) To date, extra- and intra-cavity frequency doubled Nd: lasers using KTP have become a preferred green laser source for many R&D, medical, industrial and commercial applications. By using extracavity KTP SHG, over 80% conversion efficiency and 700mJ green laser were obtained with a 900 mJ jection-seeded Q-switched Nd: YAG laser. Type II SHG in XY Plane Type II SHG in XZ Plane Applied to diode-pumped Nd: laser, KTP is a basic NLO crystal for the construction of compact visible solid state laser systems. Recent advances in intracavity-doubled Nd: YVO4 and Nd: YAG lasers have increased the demand for compact green lasers used in display, construction, optical disk and laser printer. Over 200 mw TEM00 green outputs are available from LD pumped Nd: YVO4 and Nd: YAG lasers and 3 W TEM00, mode-locked green laser was generated by intracavity SHG in a 5 |
|
» Posted by: [] |
|
|
|
|
|
[Sell]
Cr4+:YAG Crystal |
|
|
Chromium Doped Yttrium Aluminum Garnet Cr4+:YAG Crystal A High Power, Solid State and Compact Passive Q-switch Passive Q-Switching is preferred for simplicity of manufacturing and operation, low cost and reduced system size and weight. Cr4+: YAG (Y3Al5O12) is an excellent crystal for passively Q-switching diode pumped or lamp-pumped Nd: YAG, Nd: YLF, Yb: YAG or other Nd and Yb doped lasers at wavelength from 1.0 to 1.2 mm. Because of its chemically stable, durable, UV resistant, good thermal conductivity and high damage threshold (> 500 MW/cm2) and being easy to be operated, it will replace traditional materials, such as, LiF, organic Dye and color centers. Basic Properties of Cr4+:YAG Formula Cr4+:Y3Al5O12 Crystal Structure Cubic Garnet Dopant Level 0.5 mol% ~ 3 mol% Hardness 8.5 (Mohs) Damage Threshold > 500 MW/cm2 Refractive Index 1.82 @ 1064 nm Main Specifications Flatness < λ/8 Wavefront Distortion λl/4 Parallelism < 30” Surface quality 20/10 scratch/dig AR-coating R<0.2% @ 1064 nm Standard Aperture 3X3 ~ 10X10 mm AR-coatings and HR-coatings are also available. We can control the initial transmission (To) from 10% to 95% according to customer’s requirements. The preliminary experiments of WTS's Cr4+: YAG showed that the pulse width of passively Q-switched lasers could be as short as 9 ns for diode pumped Nd: YAG lasers and repetition as high as 10 kHz for diode pumped Nd: YVO4 lasers. Furthermore, an efficient green output at 532 nm, and UV output at 355 nm and 266 nm were generated, after a subsequent intracavity SHG in KTP for diode pumped and passive Q-switched Nd: YAG and Nd:YVO4 lasers. Cr4+: YAG is also a laser crystal with tunable output from 1.35 mm to 1.6 mm. It can generate ultrashort pulse laser (to fs pulsed) when pumped by Nd: YAG laser at 1.064mm. Note: When ordering Cr4+: YAG crystal, please specify the aperture, initial transmission (To) and coatings.
|
|
» Posted by: [] |
|
|
|
|
|
[Sell]
Single Layer MgF2 Anti-reflection Coating |
|
|
Magnesium fluoride(MgF2) is probably the most widely used thin film material for optical coatings. Its performance is not outstanding but represents a significant improvement over an uncoated surface. It is the most commonly used, low-cost anti-reflection coating, and widely used in Lens & Prism, Input & output surface.
|
|
» Posted by: [] |
|
|
|
|
|
[Sell]
Partial Reflection Coating |
|
|
Single Wavelength Partial Reflective Coating When a narrow wavelength radiation is incident on Single wavelength partial reflective coating, part of the radiation is reflected and the other part is transmitted. This coating always show a high reflectivity for S-polarization radiation and high transmission for P-polarization radiation. The main application of this coating is for a beamsplitter with 45 angle of incidence. It is the most commonly used, low-cost anti-reflection coating, and widely used in Lens & Prism, Input & output surface. Broadband Wavelength Partial Reflective Coating Broadband Wavelength Partial Reflective coating has similar performance to that of Single Wavelength Partial Reflective coating. However, Broadband Wavelength Partial Reflective coating can split the incident radiation over a wide spectrum, not Single Wavelength Partial Reflective. It can be widely used to split the incident radiation over a wide spectrum.
|
|
» Posted by: [] |
|
|
|
|
|
[Sell]
MultiLayer Sharp “V” Anti-reflection coating |
|
|
It can reach the lowest reflectivity at a center wavelength, and is widely used in single laser wavelength or multiple, closely spaced wavelength system.
|
|
» Posted by: [] |
|
|
|
|
|
[Sell]
Beamsplitter Cubes |
|
|
Beamsplitter Cube is a more sophisticated type consisting of two right- angle prismscemented together at their hypotenuse faces.The cemented face of one prism is coated.Before cementing, with a metallic or dielectric layer having the desired reflecting properties, both in the percentage of reflection and the desired color. The absorption loss to the coating is minimal and transmission and reflection approach 50%. Specifications: Material: BK7 grade A optical glass Dimension Tolerance: +0.2, -0.2mm Thickness Tolerance: ±0.2mm Surface quality: 60/40 Clear Aperture: >85% Flatness: λ/4 per 25mm@633nm Parallelism: ±3' Bevel: <0.25mm X 45° Coating: Hypotenuse surface :Partial reflective coating Entrance/Exit surfaces :AR coating Reflectance/Transmittance R/T=50/50% ±5% ; Other ratio is available ( R,T are the average of S- and P-pol) ,AOI= 0° Typical Sizes: Size(mm) Size(mm) 5.0x5.0x5.0 18.0x18.0x18.0 10.0x10.0x10.0 20.0x20.0x20.0 12.7x12.7x12.7 25.4x25.4x25.4 15.0x15.0x15.0 30.0x30.0x30.0
|
|
» Posted by: [] |
|
|
|
|
|
[Sell]
Sell Capacitor CBB65 |
|
|
The capacitor takes heavy-edge metallized Al/Zn film as electrodes and dielectric. The elements are tight winded by high-velocity winders and canned in aluminum cases. Refined castor oil is adopted as impregnation agent treated in vacuum and high temperature condition. Those make a more reliable performance and longer lifespan for a capacitor. Meanwhile the second generation of mechanical anti-explosion design is selected as blast-proof secure measure for our capacitors. The reliability is more affirmatively enhanced. Applications: Broadly applied to starting and running of AC single-phase motors at 50Hz(60Hz) frequency for family air conditioners and high power illuminators for the sake of power factor compensation. Technical Specifications: Standard:IEC 60252-1:2001 Technical features: Climate type:40/70/21 or 40/85/21 Capacitance tolerance:± 5% I.R:≥3000S(MΩ·µF) Dielectric dissipation factor:tgδ≤0.002 (50Hz~100Hz) Application requirements: Altitude:≤2000m Residual voltage while loading: less than 10% of rated voltage. Allowed maximum voltage: less than 1.1 times of rated voltage Permissible maximum current: less than 1.3 times of rated current. Dimensional specification (mm) Related voltage 200,250,370,400,440,450,600,700,1200VAC Capacitance 1--100uf D 40,45,50,55, 60,63.5, 52*32,71*45 H 60,65,70,75,80,85,90, 95,100,105,110,115, 120,125,135,138
|
|
» Posted by: Anhui Safe Electronics Co.Ltd [China] |
|
|
|
|
|
[Sell]
Sell Capacitor CBB61 |
|
|
The capacitor takes heavy-edge metallized Al/Zn film as electrodes and dielectric. It is impregnated with flame-retardant epoxy resin and canned in cubic ABS or PBT plastic case with characteristics of small size, reliable performance and long endurance. Applications: Broadly applied to starting and running of AC single-phase motors at 50Hz(60Hz) frequency for air conditioners' fans, electric fans and exhaust fans etc. at comparatively low rated power. Technical Specifications Standard:IEC 60252-1:2001 Technical features: Climate type:40/70/21 or 40/85/21 Capacitance tolerance:± 5% I.R:≥3000S(MΩ·µF) Dielectric dissipation factor:tgδ≤0.002 (50Hz~100Hz) Application requirements: Altitude:≤2000m Residual voltage in application: less than 10% of rated voltage. Allowed maximum voltage: less than 1.1 times of rated voltage Permissible maximum current: less than 1.3 times of rated current. Dimensions & specifications (mm) Related voltage 200,250,370,400,440,450,600,700,1200VAC Capacitance 1--100uf L 31,37,38,47,48,58 W 14,17,18,21,22,26,34 H 24,27,28,29,31,34,38,40,44,52
|
|
» Posted by: Anhui Safe Electronics Co.Ltd [China] |
|
|
|
|
|
[Sell]
Sell Capacitor CBB60 |
|
|
 The capacitor takes heavy-edge metallized Al/Zn PP film as electrodes and dielectric. Its components are sealed with flame-retardant epoxy resin. It has cylindrical outline with high moisture resistance and stability. Applications Broadly applied to starting and running of AC single-phase motors at 50Hz(60Hz) frequency for washers and high efficiency compressors of refrigerators etc. Technical Specifications Standard:IEC 60252-1:2001 Technical features: Climate type:40/70/21 or 40/85/21 Capacitance tolerance:± 5% Insulation Resistance:≥3000S(MΩ·µF) Dielectric dissipation factor:tgδ≤0.002 (50Hz~100Hz) Application requirements: Altitude:≤2000m Residual voltage in application :less than 10% of rated voltage. Allowed maximum voltage: less than 1.1 times of rated voltage Permissible maximum current: less than 1.3 times of rated current Dimensions & specifications (mm) Related voltage 200,250,370,400,440,450,600,700,1200VAC Capacitance 1--100uf D 30,32,35,40, 41,43,45,46, 50 H 47,57,65,73,80,84,85,98,105,110
|
|
» Posted by: Anhui Safe Electronics Co.Ltd [China] |
|
|
|
|
|
[Sell]
100W HID xenon kit/ AC normal ballast |
|
|
Specification: 1. Input voltage: 16 to 32V 2. Input current: 3.5A 3. 12V / 24V, 35W, 50W , 55W,70W,75W,100W available 4. Working temperature: -40 C to +105 C 5. Lifetime: >3, 200hrs 6. Color temperature: 4, 300K - 12, 000K, pink, purple, golden-yellow, green, sky-blue, green-blue, purple-blue. 7. Waterproof and vibration resistant, short-circuit and open-circuit protections 8. Digital ballast with safety shutdown, polarity and overload protection 9. Base type: Single beam: H1, H3, H4, H7, H7R, H8, H9, H11, H13, D2C, D2S, D4S, 880, 881, 9004, 9005, 9006, 9007. Xenon and Halogen: H4-2, H13-2, 9004-2, 9007-2 Hi/ Lo: H4-3, H13-3, 9004-3, 9007-3 Xenon and xenon: H4-4, H13-4, 9004-4, 9007-4 10. Packing: RX color box, No name color box. OEM order is welcomed. 11. Warrenty: 18 Month. |
|
» Posted by: Guangzhou Hongmao Opto-Electronic Technology Co.Ltd [China] |
|
|
|
|
|
[Sell]
Hot sale HID working light |
|
|
. Internal ballast . HID bulb: D2 . HID Power: 35W . Operating Voltage: 9-32V . Luminous: 3200Lum 400lum . Waterproof rate: IP67 . Working Temperature: -40~+80 . Vibration: 20Grms 24-2000Hz . Optional Color: Black . Color Temperature: 6000K. (4300k-12000k optional) . Material: Plastic . Opitonal Beam: Spot beam/Wide flood Beam . Size: 3.8" 110mm*110mm*130mm . material :ABS |
|
» Posted by: Guangzhou Hongmao Opto-Electronic Technology Co.Ltd [China] |
|
|
|
|
|
[Sell]
7'' HID work light |
|
|
V-input:9 ~ 32V /24V/12V Bulb type:H3 Working current :3.7A&2.8A Current Max:5A Power output:35W/55W Working temp:-40~+80 Lumin:3200Lum 400lum & |
|
» Posted by: Guangzhou Hongmao Opto-Electronic Technology Co.Ltd [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 next»
|
|
|