|
|
|
|
|
|
|
[Sell]
Power pallet truck 075 |
 |
|
| Full Electric Stacker FEAC series AC Technology Capacity 1200kg, 1500kg Conforms to EN1757-1:2001, EN1726 Heavy duty range for tough application. Top quality electronic control system from Curtis. Powerful power pack and drive wheel made in Europe. Powerful maintenance free AC drive motor. Drive unit with electromagnetic brake. Specification and technical data: Model FE1516AC Capacity (kg) 1500 Lifting Height h3(mm) 1600 Min. Fork Height h(mm) 90 Load Centre C(mm) 600 Fork Length I(mm) 1150 Fork Width M(mm) 540 Travelling Speed without Load 5.5 km/h, With Full Load 4.8 Km/h Lifting Speed without Load 144 mm/s, With Full Load 95 mm/s Lowering Speed without Load 150 mm/h, With Full Load 65 mm/s Motors Traveling (KW/V) 1.2/24 (AC) Motors Lifting (KW/V) 2.2/24 Battery(service free) (Ah/V) 200/24 Battery Charger (A/V) 20/24 Front Roller (mm) 78x70 Rear Roller (mm) 150x75 Drive Wheel (mm) 250x80 Net Weight (kg) 614 Dimension X(mm) 460 S(mm) 56 X2(mm) 200 Y(mm) 1270 L2(mm) 780 L(mm) 1930 N(mm) 160 h1(mm) 2090 h4(mm) 2244 B(mm) 940 Wa(mm) 1525 Option: Traction Battery (240Ah/24V). |
|
» Posted by: Hydman Enterprises Co.,Ltd. [China]  |
|
|
|
|
|
[Sell]
Power pallet truck 091 |
|
|
| Semi-Electric Stacker MS series Heavy duty design and top quality mast construction. Safety guard on load roller and steering wheel. Light and easy manual steering system. Stepless speed of lifting/lowering. Conforms to EN1757-1:2001,EN1727. Specification and technical data: Model MS1033 Capacity (kg) 1000 Lifting Height (mm) 3300 Lifting Speed (with/without load) (mm/s) 95/127 Power Pack (W) 1500 Battery (Service free) (Ah/V) 120/12 Battery Charger (A/V) 12/12 Steering Wheel (mm) 18050 Load Roller (mm) 8270 Overall Length (mm) 1820 Overall Width (mm) 1000 Overall Height (mm) 2225 Net Weight (with battery) (kg) 610 |
|
| » Posted by: Hydman Enterprises Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
Power pallet truck 047 |
|
|
| Electric Stacker With Straddle Leg FW/FWAC series With DC or AC technology Heavy duty design with top quality mast construction. Straddle leg design suitable for two faces or low pallet. Powerful power pack with European technology. Drive unit with electromagnetic brake. Top quality electronic control system from Curtis. Conforms to EN1757-1,EN 1726. Specification and technical data: Model FW1229 FW1229AC Capacity (kg) 1200 Lifting Height h3(mm) 2900 Min.Fork Height h(mm) 65 Load Centre C(mm) 500 Fork Length I(mm) 1000 Motors Traveling (KW/V) 1.2/24 Motors Lifting (KW/V) 2.2/24 Service Free Battery 200Ah/24V Battery Charger 20A/24V Traction Battery (option) 240Ah/24V Front Roller (mm) Polyurethane, Tandem 78x70mm Rear Roller (mm) Polyurethane, 150x75mm Drive Wheel (mm) Polyurethane, 250x80mm Net Weight (kg) 895 Dimension S(mm) 38 X2(mm) 200 Y(mm) 1283 L2(mm) 792 L(mm) 1792 B1(mm) 1197-1502 B2(mm) 965-1270 A(mm) 230-790 N(mm) 100 h1(mm) 2101 h3(mm) 2900 h4(mm) 3760 B(mm) 940 Wa(mm) 1533 |
|
| » Posted by: Hydman Enterprises Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
Power pallet truck 005 |
|
|
| Powered Pallet Truck TEAC/TKAC series AC Technology Maneuver loads up ramps and dockboards effortlessly. Compact design combines with new technology, making this pallet truck ideal for narrow, cramped aisles. shortest head length in the market permits the best possible maneuverability. Smooth stepless speed control with European technology. Power unit with European technology. Powerfull traction battery. Powerful maintenance free AC drive motor. Drive unit with electromagnetic brake. Conforms to EN1726 and EN1175-1. Specification and technical data: Model TE20S AC Type without platform Capacity (kg) 2000 Load Center C (mm) 600 Max. Fork Height H (mm) 205 Min. Fork Height h (mm) 85 Fork Length L1 (mm) 1150 Individual Fork Width b (mm) 160 Wheel Base y (mm) 1406 Turning Radius Wa (mm) 1608 Traveling Speed With/Without Load (Km/h) 3.6/5.4 Lifting Speed With/Without Load (mm/s) 22/32 Lowering Speed With/Without Load (mm/s) 50/55 Drive Wheel 1200W, 250mm (AC) Power Unit (lifting motor) (W/V) 800/24 Traction Battery 24V/210Ah, 185kg Battery Charger 25A/24V Overall Dimension (LWH) (mm) 17816901305 Fork Overall Width B (mm) 530 Net Weight (kg) 324 Tiller O O = Option Note: Specification and materials are subject to change without notice. |
|
| » Posted by: Hydman Enterprises Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
Diesel forklift 006 |
|
|
| General Model CPCD30 Rated capacity kg 3000 Load center mm 500 Dimension Lift height mm 3000 Overall dimension Length to fork face mm 2720 Overall width mm 1225 Mast lowered height mm 2080 Overhead guard height mm 2090 Turning radius mm 2460 Performance Travel speed (full load/no load) Hydraulic km/h 18/19 Lift speed (no load/full load) mm/sec 430 Max grade ability % 20 Engine XC490;XC495;ISUZU C240;ISUZU 4JG2;YANMAR 4YNE92; YANMAR 4TNE98 |
|
| » Posted by: Hydman Enterprises Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
Power pallet truck 017 |
|
|
| Double-Pallet Stacker FD series Capacity 1200kg, 1500kg New tiller made by REMA, German Efficiency carry double pallets simultaneously. High-comfort tiller grip reduces fatigue, improving productivity. Heavy-duty design with top quality mast construction. Powerful drive unit and power pack are made in Europe. Top quality electronic control system made in Europe. Conforms to EN 1757-1:2001, EN 1726 Specification and technical data: Model FD1229 Capacity (kg) 1200 Lifting Height (mm) 2900 Load Centre (mm) 600 Fork Length (mm) 1150 Fork Width (mm) 680 Motors Travelling (W/V) 2000/24 Motors Lifting (W/V) 2000/24 Driver Wheel (mm) 23075 Front Roller (mm) 8070 Rear Roller (mm) 14060 Battery (Ah/V) 240/24 Net Weight (kg) 875 Dimension X (mm) 380 Y (mm) 1431 L1 (mm) 2080 L (mm) 2493 K (mm) 210 h1 (mm) 2029 h2 (mm) 3434 h3 (mm) 90 N (mm) 190 B (mm) 844 Wa 1625 Wa 1730 Wa 2125 |
|
| » Posted by: Hydman Enterprises Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
Diesel forklift 007 |
|
|
| Specification and technical data: General Model CPCD35 Rated capacity kg 3500 Load center mm 500 Dimension Lift height mm 3000 Overall dimension Length to fork face mm 2775 Overall width mm 1225 Mast lowered height mm 2230 Overhead guard height mm 2090 Turning radius mm 2540 Performance Travel speed (full load/no load) Hydraulic km/h 18/19 Lift speed (no load/full load) mm/sec 400 Max grade ability % 15 Engine XC490;XC495;ISUZU C240;ISUZU 4JG2;YANMAR 4YNE92; YANMAR 4TNE98 |
|
| » Posted by: Hydman Enterprises Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
F model diesel forklift 002 |
|
|
| F model forklift specification and technical data: General Model CPCD25F Rated capacity kg 2500 Load center mm 500 Dimension Lift height mm 3000 Overall dimension Length to fork face mm 2634 Overall width mm 1150 Mast lowered height mm 2050 Overhead guard height mm 2150 Turning radius mm 2290 Performance Travel speed(no load/full load) km/h 17/19 Lift speed with load mm/sec 470 Max grade ability Max. grade ability % 20 Engine XC BPG490;XC BPG495;Dachai CA498;ISUZU C240PKJ; YANMAR 4TNE92 |
|
| » Posted by: Hydman Enterprises Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
AC electric forklift 001 |
|
|
| Pict Specification and technical data: General Model CPD15J Rated capacity kg 1500 Load center mm 500 Dimension Lift height mm 3000 Overall dimension Length to fork face mm 2056 Overall width mm 1090 Mast lowered height mm 1995 Overhead guard height mm 2162 Turning radius mm 1820 Performance Full load / no load Travel speed km/h 13/15 Lift speed mm/sec 300/400 Max grade ability % 15 Power & Control Unit Battery Voltage V 48 Italian SME AC motor & Italian SME AC Controller |
|
| » Posted by: Hydman Enterprises Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
LT type Midline butterfly valve |
|
|
| Brand: KVC Name:LT type Midline butterfly valve Type:D971LT-XN-20Q Size:2-24 inches Body Material:gray cast iron,nodular cast iron,carbon steel,stainless steel,aluminium alloy Plate Material:iron nylon cladding,ductile iron ptfe cladding,ductile iron,aluminium bronze plating,stainless steel,carbon steel,aluminium alloy plating Seat Material:natural rubber,butyronitrile tubber,neoprene and ethylene-propylene rubber,hypalon,silicone rubber, fluororubber,ptfe Surface Treatment:epoxy resin Drive Way:pneumatic Certification: ISO9001,2008 international quality certification, the European CE certification and (TS)pressure pipeline. Packing:wooden box MOQ:1 set Payment:T/T Transportation:By sea Delivery Time:one week to one month Application Scope:This product is widely used in water power,electric power,steel,chemical industry,papermaking,petroleum,pharmaceutical,food,gas,water treatment,etc. The main function is closure and adjustment. Features: A The butterfly plate surface mainly uses nylon11,ptfe,and other material,such as ductile iron electroplating, stainless steel,aluminium alloy materials,aluminium bronze. Seat selects different rubber material with chemical and physical properties, high-performance , ptfe ,etc. Accordingly improve the product's sealing and also increase application scope. As the same time,collocate different material for parts(body,shaft,bushing), we can make productions according to medium and customers' request. B The advanced technology of no-pin connections and seal for automatic centering, then ensure that the medium and metal completely are insulated. And improve the reliability of the product. the operating torque belows normal butterfly valve,and easy maintenance,working life is five times longer than the normal butterfly valve. D The surface of this valve uses epoxy resin coating, then it shows more beautiful and its outer can be excellent anti-corrosion function. E Completely sealing and the result of gas leak test is 0. F Chose various device drive and installation according to users demand(accept OEM). G oil resistant, corrosion resisting,aging resistant, heat-resistant Meets GB standards, also compatible other countries' standard. |
|
| » Posted by: KVC VALVE BEIJING CO.,LTD [China] |
|
|
|
|
|
[Sell]
PP Woven Bag machine |
|
|
| Performance and characteristics: 1) The use of touch-screen operation is simple and intuitive and with high automation. 2) Alarm system, electrical faults and working status are clear enough. 3) Driven by serve motor, the length of bag can be precisely controlled. 6mm length can accept 10,000 pulses, length control is accurate. 4) Main parts imported from Germany and Japan which have reliable performance. 5) Motor uses frequency conversion device to save energy. 6) The woven cloth will be automatically thermally cut off in a fixed length and sewed, and laborsaving can be realized. 7) Sticking is avoided after the bag being thermally cut off and it is easy to open. 8) The running method in manual or automatic is available. The machine will stop automatically when the cloth is over. 9) Pneumatically driving is adopted in cloth releasing and can be easily operated. |
|
| » Posted by: HEFEI TIANFENG PLASTIC MACHINERY CO.,LTD [China] |
|
|
|
|
|
[Sell]
Two Roller Rubber Calender |
|
|
| Two-roll rubber calendar is mainly used to Roll-extrusion for rubber-sheet. Sticking & friction rubber of fabrics. The rolls are made of chilled alloy cast iron with bored cavities and can be heated by steam or cooled by water homogenously to meet different requirements. The machine is consisted of bedplate, frame, rolls , motor , coupling ,speed ratio gear , adjusting spacing device , the adjusting temperature device of roll . The bedplate is whole model, Installation convenience. Roll are made of chilled case alloy iron, the working surface of roll is hardness and smoothly. steam and cooling water can pass through inner of the rolls so that surface temperature can be adjusted . Roll fluctuation arrange , under roll is initiative roll , motor pass through coupling ,To make under roll driving , above roll by under roll pass though speed radio driving . Roll bearing adopt roll bearing, high precision, long service life , Axes pathway is no abrasion . Adjusting spacing device is consisted of one left and one right hand wheel. The bearing bases need is moved and reached nip by worm and worm wheel. There are airproof device inboard the bearing bases. The bearing is lubricated by oil. Model XY-2I 160x320 XY-2I 252x720 XY-2I 360x1120 XY-2I 450x1500 XY-2I 550x1830 XY-2I 610x1730 XY-2I 810x2430 Item Roll dia mm 160 252 360 450 550 610 810 Roll working length mm 320 620 1120 1500 1830 1730 2430 Roll ratio 1:1 1:1 1:1 1:1 1:1 1:1 1:1 roll linear speed m/min 7.79 1.2-12 3-20.2 2.5-24.8 2-18.7 4-36 2-20 Adjusting nip range mm 0-4.5 0-6 0-10 0-10 0-12 0-15 0.5-25 Min.Calendering Product thickness mm 0.2 0.2 0.2 0.2 0.2 0.2 0.5 Calendering product width mm 250 580 920 1250 1600 1500 2150 Motor power kw 5.5 15 37 45 75 90 160 Overall dimensions L mm 2200 3950 5400 7113 7420 5987 8690 W mm 530 770 1542 1595 1760 1860 3139 H mm 1470 1590 1681 2446 2760 2988 4270 About weight t ~1.2 ~5 ~14.5 ~22 ~24 ~30 ~62 |
|
| » Posted by: Qingdao Everfine Machinery Co., Ltd [China] |
|
|
|
|
|
[Sell]
oil Weighing filling machine |
|
|
oil Weighing filling machine
fendou86gzj
Filling Machine Product Description;
Our company products include;Oil filling machine,Liquid filling machine,Paste filling machine,ect.
Machine name oil Weighing filling machine
Machie type CZDG-B
Specifications
Filling volume ;5-200KG
Filling speed ;80-120barrel/hour(by 200kg)
Filling accuracy; ≤ ± 0.35% FS
Voltage; 220v/380v
Gas source pressure 0.5-0.7Mpa 1
Filling heads one head
Features
Weighing filling machine, high-dose filling machine, electronic scales filling machine;
Cheap, economical and practical
Mechanical Anti-drip.
Related products links; Liquid filling machines | filling machines | Fillers | Filling Equipment | Inline Filling System
------------------------------------------------
Jinan Dongtai Machinery Manufacturing Co., Ltd
Department; International Trade Department
Post Code/ZIP; 250100
Contact Person; karen Gong(sales manager)
Tel; 0086-0531-88738866-605
Fax; 0086-0531-88902662
Mobile Phone ; 86-15866784676
MSN; dongtaipack@hotmail.com
Email; shandongxunjie@163.com
Website; http;//www.dongtaipack.com <-> filling machines
http;//www.ltete.com <-> Fillers
http;//www.xunjiejx.com <-> Filling Equipment
http;//www.jinanxunjie.cn <-> Inline Filling Systems
Address; No.3843,Jichang Road,Lingang Development Zone,Jinan China |
|
| » Posted by: Jinan Xunjie Packing Machinery Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Flat Yarn/Tape Extrusion Line |
|
|
| The machine uses the polypropylene (PP) or polyethylene (PE) material to make tape (flat yarn) through production procedures of material heating & extruding, splitting the film into tapes, the tapes stretching & forming, tapes winding on the bobbins by winding machine, then put the bobbins with tapes on circular loom for weaving. Through our many times improving, the machine can be fit for all kinds material, such as 100% recycled PP & PE, powder or grain PP & PE, to produce the tapes. The screw and barrel of extruder are made of high quality 38CrMoAlA allay steel; the hardness is over HV950 after nitrogen zing treatment. The gears & chain wheels are made of 45# medium carbon steel and done the treatment of high frequency quench. The driving rollers are electroplated with hard Cr, tension self-controlling of winding-rollers are applied to the driving unit. The barrel of extruder, bullhead tee and die adopt cast aluminum heater that is endurable. It has the performance of easy operation & maintenance, reliable quality & running and long usage life. |
|
| » Posted by: HEFEI TIANFENG PLASTIC MACHINERY CO.,LTD [China] |
|
|
|
|
|
[Sell]
Circular Loom |
|
|
| This series circular loom is used for weaving flat PP/HDPE yarn to tube cloth, it had developed from our long time research and manufacture experience with adopting advanced technology from domestic and abroad. It can weave different quality flat yarn even complete recycled material. Reasonable design, proper structure, easy operation, convenient maintainance, low power consumption and high efficiency etc. New surface cam driving stucture; rimless wheel shuttle style, less friction, more steady running; Latest weft&warp detecting system, lower waste, higher efficiency; New weft automatic feeding system, reducing waster; Aotomatic synchronization controller to guarantee smooth cloth; Maxim rotary speed 180rpm with 2.7m/min output (10*10), faster, more steady, lower consumption. |
|
| » Posted by: HEFEI TIANFENG PLASTIC MACHINERY CO.,LTD [China] |
|
|
|
|
|
[Sell]
Mesh/Leno Bag Making Machine |
|
|
| The cylinder net pouch machine - mesh machine this aircraft is uses in mesh sack's and so on fruit, vegetables, carrot, ball vegetable, potato, corn productions. This machine is the new net pouch machine, is this factory development another kind of advanced skewing mechanism net sack machine, has the frequency conversion disposition, the menopause, the latitude to break, the latitude auto-stop and the obvious district, the light controls functions and so on counting. The structure is advanced; service convenient, characteristics and so on high benefit energy conservation. Saves the fitting expense compared to the old generation needle beat skewing mechanism's net sack machine 90%, electrical energy 35%, moreover the performance is stable, intersects has the winding after the silk to be accurate, can realize 180 revolving after the silk, to passes through the silk to be able to unfold its remarkable performance for the round silk net sack, is the substitution old style network pouch machine most ideal choice. |
|
| » Posted by: HEFEI TIANFENG PLASTIC MACHINERY CO.,LTD [China] |
|
|
|
|
|
[Sell]
Block bottom valve cement bag coversion line |
|
|
| New generation block bottom valve sack conversion line adopts hot air welding technology to produce laminated pp woven sacks. Block bottom valve sack is the most well known sack style in the world. It shares many advantages compared to other style sacks such as high strength, low cost, improving filing speed, suitable for automatic insert filing line, great environment protection, stably palletize, high efficient transportation, easy remark, etc. This line is widely used in cement, fertilizer, grain, feed, chemical material industry for packing powder and granule. |
|
| » Posted by: HEFEI TIANFENG PLASTIC MACHINERY CO.,LTD [China] |
|
|
|
|
|
[Sell]
Shopping bag machine |
|
|
| We are professional manufacturer of Plastic Bag Making Machine, PE Shopping Bag Machine, Vest Bag Machine, Film Blowing Machine, garbage bag machine with 30 years experience in China. Our film blowing machine, which synthesizes the design and production of the same kind at home and abroad, has the merits of advanced and practical design, stable function and vast adaptability. It can produce the fully new or reproduced HDPE and LDPE lining bags, convenient bags, concavo-convex sealing bags, mulch film, shed film, double-color film, liquid packaging film, double-layer compound film and varied packaging films. Our 360 degree continuous rotating die head can make your products more smooth and even, and can better produce top-grade products , while non-stopped net changer can change net automatically in normal production without stopping machine, damaging films or losing material. |
|
| » Posted by: HEFEI TIANFENG PLASTIC MACHINERY CO.,LTD [China] |
|
|
|
|
|
[Sell]
Bopp film lamination/coating machine |
|
|
| This machine uses polypropylene and polyethylene. Under the molten state, it has a peculiar the adhesive property, which can daub film among one or both sides of braiding bag and paper, or compound paper or BOPP braiding bags through pasting and cutting by pressure. |
|
| » Posted by: HEFEI TIANFENG PLASTIC MACHINERY CO.,LTD [China] |
|
|
|
|
|
[Sell]
PP Woven Bag Auto cut and sew machine |
|
|
| The machine is used for automatic cutting and sewing of polyethylene, polypropylene bags. It uses the Japanese New Lang company's DN-2HS high speed sewing machines. The main components of the control system are also used high-quality and performance of foreign imported products, which technical content is in the domestic leading level. The machine is sophisticated, beautiful and easy to operate. It is not only can greatly save the labor force, but also can greatly reduce the occupation of production areas. Performance and characteristics: 1) The use of touch-screen operation is simple and intuitive and with high automation. 2) Alarm system, electrical faults and working status are clear enough. 3) Driven by serve motor, the length of bag can be precisely controlled. 6mm length can accept 10,000 pulses, length control is accurate. 4) Main parts imported from Germany and Japan which have reliable performance. 5) Motor uses frequency conversion device to save energy. 6) The woven cloth will be automatically thermally cut off in a fixed length and sewed, and laborsaving can be realized. 7) Sticking is avoided after the bag being thermally cut off and it is easy to open. 8) The running method in manual or automatic is available. The machine will stop automatically when the cloth is over. 9) Pneumatically driving is adopted in cloth releasing and can be easily operated. |
|
| » Posted by: HEFEI TIANFENG PLASTIC MACHINERY CO.,LTD [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 next»
|
|
|
