|
|
|
|
|
|
|
[Sell]
Non Slip Stair Treads |
 |
|
Non slip diamond pattern stair tread has a male/female interlocking design and can be installed over structural members to provide a solid, skid resistant flooring.
Non-slip solid tread plates can be used to cover surfaces with holes to allow for wheelchair and high heel traffic. Optional edge bands or wedges along the length of the panels, make it easier for wheelchairs and other wheel cart traffic to roll up onto the floor surface. The two styles of edge bands are "A" and "B".
Non Slip Treads are an indoor, outdoor, home or commercial aluminum non slip surface that is an alternative to non skid tape. Non slip stair treads are designed to be used on any surface including wood, concrete, masonry or aluminum stairs, decks and marine surfaces. Featuring a lifetime warranty these inexpensive, easy to install, non skid strips will increase safety and save you money. Additionally, non slip stair treads are safe for the environment and will reduce/eliminate the need for salt. |
|
» Posted by: AnRan Aluminum Checker Plate Factory [China]  |
|
|
|
|
|
[Sell]
Embossed Tread Plate |
|
|
We can offer embossing on a variety of materials.
Finished products are mainly metal tread plates of various sizes.
Our embossed tread plates have reduced cost and ease of application. Embossing is a process where a die is pressed into the back of a nameplate to raise the letters or other design elements to add depth, class and eloquence to an otherwise ordinary design.
Embossed Tread Plate provides superior anti-slip safety. It is resistant to weathering, corrosion and contact with chemicals and remains truly slip resistant when surface is wet or oily.
Embossed Tread Plate features:
Truly Slip Resistant.
Meets New Industry Safety.
Regulations from the NFPA.
Durable and Weather Resistant.
Bright Reflective Surface. |
|
| » Posted by: AnRan Aluminum Checker Plate Factory [China] |
|
|
|
|
|
[Sell]
Rebar Tie Wire |
|
|
16 Gauge Black Annealed Wire
3-1/2# Hip Coils (385 ft/roll)
20 Rolls/carton
PVC Coated wire for epoxy bars also available
Galvanized wire for added corrosion resistance also available
|
|
| » Posted by: Anping First Binding Wire Factory [China] |
|
|
|
|
|
[Sell]
Double Loop Wire Ties |
|
|
The double loop wire ties as a binding wire used in packing or construction. It is easy to operate, enhances the working efficiency, reduces pollution. We can also customize product’s diameter and lengths according to your requirements.
Length: 3" to 24".
Coating: black annealed, copper, galvanized or PVC coated.
Packaging
Rolls of 5,000 apply to lighter gauge ties up to at least 12". Rolls of 1,000 to 2,500 apply to heavier gauge ties and longer lengths.
From 3" to 40", 12 to 19 Gauge, in a variety of finishes.
|
|
| » Posted by: Anping First Binding Wire Factory [China] |
|
|
|
|
|
[Sell]
Baling Wire |
|
|
We supply low carbon oiled baling wire at various wire diameters, produced according to YB/T5033-2001 standard.
Features: Good surface shine, uniform galvanizing coating layer, good adhesion strength, excellent corrosion resistance.
Packing: In coils of 10kg each
Sizes: Standard as 1.6mm – 6mm.
Baling wire coil diameter: Inside dia 300mm to 700mm.
Uses: Mainly for baling of waste items, used as tie wire or cotton baling wire, hey baling wire.
Forms of Supply: Coil wire, cut wire (any length).
|
|
| » Posted by: Anping First Binding Wire Factory [China] |
|
|
|
|
|
[Sell]
PVC Coated Tie Wire |
|
|
This product uses quality galvanized wire as raw materials. The plastic and the galvanized iron wire is firmly combined together through the deep processing, offering anti-aging, corrosion-resistance, anti-cracking, and other characteristics.
Material: PE, PVC material, anti-ultraviolet and the anti-aging auxiliaries can be added.
Variety: Mainly black wire, galvanized wire, stainless steel wire, copper.
Use: Widely used in animal breeding, forestry protection, aquaculture, park and zoo fence, the stadium, with its anti-corrosion, anti-aging property and much longer service life than normal iron wire.
|
|
| » Posted by: Anping First Binding Wire Factory [China] |
|
|
|
|
|
[Sell]
Black Annealed Tie Wire |
|
|
Annealed Wire is made of carbon steel wire, used for weaving, baling in general. Applied for home use and the construction.
Annealed wire is obtained by means of thermal annealing, endowing it with the properties it needs for its main use - setting. This wire is deployed both in civil construction and in agriculture. Hence, in civil construction annealed wire, also known as “burnt wire” is used for iron setting. In agriculture annealed wire is used for bailing hay.
ANNEALED WIRE FOR CIVIL CONSTRUCTION:
The annealing of bare wire (wire which has simply been drawn) can be carried out in batches (bell-type furnace) or in line (in-line furnace).
Annealing is intended to return to the wire its ductility which it had lost during drawing.
Annealed wire is stored in coils or spools of a varying weights and dimensions depending on the purposes for which it is intended and the needs of clients. The product does not usually have any type of protective lining, paper or plastic. We offer two kinds of annealed wire, bright annealed and black annealed wire. Black annealed wire gets its name from its plain black color.
Wire Materials: Iron wire or carbon steel wire.
Soft annealed wire offers excellent flexibility and softness through the process of oxygen free annealing.
Uses: Black annealed wire is mainly processed into coil wire, spool wire or big package wire. Or further straightened and cut into cut wire and U type wire. Annealed wire is used as tie wire or baling wire in building, parks and daily binding.
Packing: Spools, coils.
Wire Diameters: Similar to galvanized iron wire, from 5mm to 0.15mm (wire gauge 6# to 38#).
|
|
| » Posted by: Anping First Binding Wire Factory [China] |
|
|
|
|
|
[Sell]
U Type Wire |
|
|
Material: Electric Galvanized Iron Wire, Hot-Dip Zinc-Plating Iron Wire, Black Iron Wire.
Application: U type wire of different sizes as baling wire or binding wire in construction.
Size: Detail specifications can be produced according to client's request.
|
|
| » Posted by: Anping First Binding Wire Factory [China] |
|
|
|
|
|
[Sell]
Galvanized Tie Wire |
|
|
We manufacture and provide quality Galvanized Iron Wire ( low carbon steel wire ) for redrawing and industrial use, mainly electro galvanized wire, hot-dip galvanized iron wire, tie wire, black iron wire, annealed iron wire, cut wire, etc.
Galvanized iron wire can be classified into hot-dipped galvanized iron wire and electro galvanized wire according to the differences of processing.
Sizes of hot-dipped galvanized wire: 8# to 36#(wire diameter ranging from 3.8mm to 0.19mm).
Sizes of electro galvanized wire: 8# to 38# (wire diameter ranging from 3.8mm to 0.15mm).
Applications of galvanized wire: Communication devices, medical treatment equipment, weaving of wire mesh, making of brushes, steel rope, filter wire mesh, high pressure pipes, construction, arts and crafts, etc.
|
|
| » Posted by: Anping First Binding Wire Factory [China] |
|
|
|
|
|
[Sell]
Box Wire |
|
|
| Boxed wire is available in 10, 11, and 12 gauge. Box Size: Available in 50 and 100 pound boxes.Wire Type: Boxed wire is available in Galvanized or Black Annealed.">Gauge: Boxed wire is available in 10, 11, and 12 gauge. Box Size: Available in 50 and 100 pound boxes. Wire Type: Boxed wire is available in Galvanized or Black Annealed. |
|
| » Posted by: Anping First Binding Wire Factory [China] |
|
|
|
|
|
[Sell]
Stainless steel tie wire with 304, 316 type for S.S woven wire |
|
|
We are especially experienced in producing stainless steel fine wire.
Features of Stainless Steel Wire: High strength, excellent anti-corrosion property, good preventing and anti-radiating property.
Applications of Stainless Steel Wire: Airspace, military, medicine, chemical industry, petroleum chemical, etc.
Specifications: 0.018 to 0.9mm. Custom orders accepted.
Materials for Stainless Steel Fine Wire: 304,304L, 316, 316L.
Wire Diameter: 5mm to 0.025mm
Applications: Stainless steel wire is used in wire-drawing, weaving of wire mesh, soft pipe, beam of cabinet, steel wire rope, filter material and equipment, spring, etc.
Stainless Steel Wire Variety According to Applications: Stainless Steel Weaving Wire; Stainless Steel Brush Wire; Stainless Steel Stitching Wire; Stainless Steel Spring Wire; Stainless Steel Nails Wire
|
|
| » Posted by: Anping First Binding Wire Factory [China] |
|
|
|
|
|
[Sell]
Binding Wire |
|
|
To avoid frequent maintenance, binding wire has been increasingly applied to daily life and high grade leisure venues. Our binding wire, made of low-carbon steel coil wire, offers good corrosion resistance and clean surface treatment. It is now widely used in many leisure entertainment sites, family and enterprises and construction industry for bundling and tying of wire.
The main products which producted by us include: U type wire, cut wire, single loop bale ties, quick link bale ties, galvanized tie wire, stainless steel tie wire, box wire, rebar tie wire, PVC coated wire, and so on.
|
|
| » Posted by: Anping First Binding Wire Factory [China] |
|
|
|
|
|
[Sell]
Sieve Shakers |
|
|
8" Sieve Shakers
8" SS-15 Sieve Tester is a budget, portable, 8" / 203mm sieve shaker designed to outperform other comparably priced equipment. The 1/4-hp unit is widely accepted by state transportation departments for highway materials testing. Back and forth lateral motion is combined with up and down and tilting motions to cause test material to travel in an orbit on the sieve surfaces. This forced travel assures full use of sieve mesh area without precise leveling of the tester. The SS-15 is recommended primarily for No. 4 to No. 200 size range, but may be used with larger material sizes when specifications for sieve loading and sample quantities permit. The Tester holds 6 full-height sieves and pan or 13 half-height sieves and pan. Clamp bar with attached cover secures sieves. The 15-minute timer has an adjustable knob-stop for improved repeatability, and a "hold" feature for continuous running. Freestanding operation is normal, but may be mounted via holes provided in bottom end flanges.
3" Sieve Shakers
3" / 76 mm Sieve Shaker is designed for small samples of chemicals, minerals, pharmaceuticals, powdered metals, cosmetics, abrasives, ores, foods, and other fine powders. Useful range is 75 μm - 4.75 mm (No. 200 to No. 4 sieve sizes) with woven wire sieves, but many materials may be sized smaller using electroformed sieves.
High frequency, 3600 vpm, electromagnetic vibratory action with 0-100% amplitude control is ideal for fine particle separations. Inline solenoid-actuated tapping action may be used during vibration (60 taps/min.) to speed dry separations. Also use the tap separately for tap-settling and bulk density tests. During dry sieving, the tapping action redistributes the sample on the sieves, and breaks static blinding, helping to clear undersize particles rapidly.
Model SS-3 includes a platform assembly for up to seven full-height. 3" / 76 mm metal sieves and pan or 14 acrylic sieves and pan. The unique sieve clamping mechanism makes insertion and removal of the sieve stack simple and convenient, yet holds the sieves snugly during operation. The captive knobs on the clamping mechanism allow it to be raised with a quick twist, releasing the sieves. The mechanism remains at this height until the knobs are twisted in the opposite direction clamping the sieves in place. The Performer III’s compact size, small footprint, and quiet operation make it an extremely desirable instrument for dry powder sample separations.
Model SS-3 features include an attractive, but rugged coated steel case, on/off controls for vibration and a manual/timed mode switch. A digital timer showing time set and time remaining, the numbered vibration control knob, and simple, efficient electromagnetic vibratory action enable the Performer III to give reliable, repeatable results. Optional stackable acrylic 3" / 76 mm see-through cylinder is helpful for observing sample action while leveling platform or for setting vibration.
Quiet, electromagnetic vibratory action.
0-100% amplitude control.
Switchable tapping action.
Precise digital timing.
Heavy Duty Shaker
Heavy Duty motorized sieve shaker holds up to 10 full height 2" deep, 20 half height 1" deep plus pan and cover. The shaker has a three way shaking action. Each revolution imparts a horizontal and vertical movement and a jolting action. The platform moves side to side with a jolt at each change of direction, plus a slight upward movement. This creates a quick efficient movement and separation of material. The unit is designed with Heavy Duty steel parts and there are no chains, belts, or flywheels, to wear out, which minimizes downtime and results in a longer lasting shaker.
Can accomodate 8" and 12" Sieves
Side to Side and tapping motions
More capacity than most other sieve shakers
Heavy duty tubular steel construction for rigidity and stability
Heavy duty 1/3 horsepower motor
|
|
| » Posted by: Hebei Hengfeng Test Sieves Factory [China] |
|
|
|
|
|
[Sell]
Accessory Equipment |
|
|
Lids & Receivers
Lids, receiving pans and intermediate receiving pans are available in brass or stainless steel with the following diameters: 38, 100, 150, 200, 250, 300, 315, 400 and 450 mm as well as 3, 8, 12 and 18 inches. Half height receivers are also available.
Pocket Sieve Set
High quality pocket sieves are very useful for testing small samples either in the laboratory or on site. The brass sieve has a range of interchangeable mesh discs of different aperture sizes. It is supplied complete with a sieve brush and belt pouch.
Sieve Brush & Analysis Graph Paper
Double ended sieve brushes specially designed for cleaning sieves with one end coarse bristles and the other fine. Graph paper for the rapid analysis of sieve test data. Pad contains 25 sheets printed on semi-transparent detail paper to allow direct comparison of graphs.
Sample Dividers
These hand held sample dividers will subdivide material samples into smaller portions while retaining the characteristics of the original sample.
Produced in stainless steel with slot widths or either 6.35 mm (1/4 in) or12.7 mm (1/2 in).
Wet Sieving Kit
For tests that require wet sieving Hengfeng offer conversion kits suitable for the Octagon and EFL shakers. Each kit includes top clamping plate with a perspex cover and spray rose, watertight seals and a stainless steel receiver with drainage spout.
|
|
| » Posted by: Hebei Hengfeng Test Sieves Factory [China] |
|
|
|
|
|
[Sell]
Special Sieves |
|
|
Half Height Sieves
Where smaller quantities of sample are being analysed half height sieves are often used. These are available in diameters of 100, 150, 200, 250, 300, 315, 350, 400 and 450 mm, as well as 8, 12 and 18 inches with the complete range of woven wire mesh or perforated plate sieving media.
Microplate Sieves
For very fine particle size analysis Hengfeng produce a range of microplate sieves made from electro-formed nickel plate in stainless steel frames of 100 mm diameter. Available with unique self clearing apertures in sizes from 5 μm upwards.
Wet Washing Sieves
For samples that need to be separated with the help of wet washing. Available in 8 inches diameter by 4 or 8 inches deep and 200 mm by 100 mm or 200 mm with brass or stainless steel frames.
A complete range of aperture sizes with optional support medium for fine mesh.
Extra Depth Sieves
Extensively used by the construction and cement industries. These extra depth sieves are available with a diameter size of 450 mm and a depth of 300 mm. Made from stainless steel with woven wire mesh or perforated sieving media.
Air Jet Sieves
These sieves are specifically designed for use with air jet systems. They are available in 200 mm diameter brass or stainless steel frames and an extensive range of aperture sizes.
Grain Sieves
As used by Government Intervention Boards and similar organisations worldwide for testing grains and cereals. Available in 200 mm diameter brass or stainless steel frames with stainless steel slotted plate and a range of aperture sizes as specified in ISO 5223.
|
|
| » Posted by: Hebei Hengfeng Test Sieves Factory [China] |
|
|
|
|
|
[Sell]
Calibrated Sieves |
|
|
The sieve is inspected in accordance with the specification. Each sieve is supplied with a calibration certificate or inspection certificates giving the range of tolerances and measurements taken.
Sieving
Sieving is sometimes referred to as the Cinderella of the particle-size analysis, because it performs most of the work but gets little of the credit.
New high-tech processes of Sedimentation, Laser Diffraction and Image Analysis get most of the headlines. Issues affecting the universal implementation of these methods vs. sieving are high instrument cost, calibration, extensive operator training and procedural discipline.
Sieving has occasionally a bad name because tests are sometimrs performed with subpar sieve mesh. Consequently, much has been made of obtaining sieves certified via ASTM or ISO mesh standards.
Sieve Certification
Optical approaches can accomplish this, either with a microscope or video image analysis. Results are presented in terms of maximum and minimum aperture size on the warp and on the weft, largest admissible openings and average openings. The number of openings measured is specified, means are calculated and a report is then generated.
The proscribed optical certification methods examine only a small number of the openings -- usually less than 1percent. For example, a 63-micron sieve has 2.5 million apertures; the ASTM method requires less than 1000 apertures. Opening size tolerances can exceed 10 percent. A 63-micron sieve has allowable tolerances of 12 microns or almost 20 percent.
|
|
| » Posted by: Hebei Hengfeng Test Sieves Factory [China] |
|
|
|
|
|
[Sell]
Grid Sieves |
|
|
Grid sieve for flakiness testing of aggregates
Feature:
1:300 mm x 300 mm
2:Made entirely of Stainless Steel
3:Lightweight Construction
4:Strong and Anti-corrosive
5:Durable
|
|
| » Posted by: Hebei Hengfeng Test Sieves Factory [China] |
|
|
|
|
|
[Sell]
Mesh Certified Test Sieves |
|
|
If your process must have traceability or sieve testing is critical to your process or customer requirements, the Mesh Certified Test Sieve (MCTS) could be the solution. the manufacturing process is thorough and tuned to provide a consistent result. In addition, the MCTS are available at economical prices.
|
|
| » Posted by: Hebei Hengfeng Test Sieves Factory [China] |
|
|
|
|
|
[Sell]
Mid-Point Test Sieves |
|
|
What Is A Mid-Point Sieve?
A mid-point test sieve has had the mesh inspected. The sieve is then selected as a mid-point if the results give tolerances that are in the middle of the ASTM Standard. For example, the ASTM permissible variations for the mesh of a No. 40 sieve (425μ) are:
1:Average Opening ±19μ.
2:Opening Dimension of 396μ not exceeded by more than 5% of the openings.
3:maximum individual opening 502μ.
The mid-point would have a variation in Average Opening of ±9.5μ, opening dimension of 396μ not exceeded by more than 2.5% of the openings and a maximum individual opening of 463.5μ. The effect of this tightened tolerance is an improvement in variation of approximately 30%. These results are traceable to a NIST standard.
Where Should Mid-Point Sieves Be Used?
When a process requires a high level of repeatability, mid-points can be used on all sieve tests. However, the predominant application for the mid-point sieves is as master stack. A master stack is used to check and recalibrate sieves used in everyday testing.
Summary
If your process must have traceability and the precision and repeatability of your sieve testing results is critical to your process or customer requirements, Mid-Point sieves should be considered for the master stacks and for every day testing of supercritical processes.
|
|
| » Posted by: Hebei Hengfeng Test Sieves Factory [China] |
|
|
|
|
|
[Sell]
Perforated Plate Sieves |
|
|
Hengfeng manufacture a wide range of perforated plate sieves for the many industries that require them. These are available in diameter sizes of 200, 300, 315, 350, 400 and 450 mm.
Aperture sizes range from 125 mm to 4 mm in square hole and 125 mm to 1 mm in round hole.
Perforated plate sieves can be supplied in frame materials of either brass or stainless steel, and all are manufactured to the highest engineering standards to ensure quality and accuracy.
All 200 mm perforated plates are stainless steel. Larger Perforated plates in stainless steel on request.
|
|
| » Posted by: Hebei Hengfeng Test Sieves Factory [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 next»
|
|
|
