|
|
|
|
|
|
|
[Sell]
Thread swing check valve |
 |
|
| Detailed Product Description Thread swing check valve Applicable Standards: Swing Check valve : API6D/API608/PI602/API594 Face to face: Thread ends:ASME B1.20.1/EN 10226-2 /EN ISO-228-1 Inspection and test : API 598 / API 6D Products Description : Products name: Thread swing check valve Size: 1/2-2 Pressure Rating: 200WOG Thread ends Material: WCB, WC6, WC9, LCB,CF8, CF3, CF8M, CF3M, CN7M, Monel and Hast. etc. Dics and Stem: SS304, SS316,SS304L,SS316L,SS410,SS416.etc. Operation: Manual Application:Offshore /Oil /Gas /Chemical /Petrochemical Pulp /Paper /Water /Wastewater /Marine Notes: The specifications can be designed and satisfied for customers' special requirements. We have obtained Certificates of CE, API 6D, API 607, TS and ISO 9001 |
|
» Posted by: Zhejiang Huaxia Valve Co.,Ltd [China]  |
|
|
|
|
|
[Sell]
Tongrui Double stage oil treatment, oil filtration, oil purifier,oil refining, oil regeneration plant |
|
|
ZJA Double stage vacuum Transformer oil regeneration machine is used for overhauling and installing the electric insulating equipments which can running as energized, such as transformer, oil switch, and mutual inductor. Also it is especially applied to regenerate and purify the seriously exhausted insulating oil and make the oils reach the international standard. As a special equipment for dehydration, degassing, purification process of various kinds of insulating oils in electrical transformers and circuit breakers etc. It is designed on vacuum drying principle, coalescence and separation technique, accurate fine filtration.
The oil technical data after treatment:
1. Gas content less than 0.1%
2. Impurity size less than 1μm without free carbon
3. Oil dielectric strength (breakdown voltage) more than 75KV
4. Acidity value less than 0.01 mgKOH/g
5. Dielectric loss factors at 90℃ less than 0.001
Features:
1. Besides the common vacuum oil purifier's function of dewatering, degassing, and eliminating impurities, this machine can regenerate the seriously exhausted oil by removing the polarity materials, such as deep oxides, free carbon in the oil effectively. It can make the seriously exhausted oil reach the normal index like anti-oxidation, acid-base water-solubility.
2. Three ways of using: the vacuum dewatering, degassing, removing impurities system can work independently, so does the regeneration oil system, and also they can work at the same time.
3. Double-stage, high vacuum pressure and high flow rate that help remove water, air, gases, solid particulates and other impurities from oil quickly and efficiently so as to improve the breakdown voltage of oil and maintain its insulating property.
4.Advanced dehydrating and degassing system that use large area three-dimension flash distillation technique to remove harmful composition in the oil, such as water, air and gases.
5. Precise fine multi-stage filtration helps remove mechanical impurities in oil, high quality filter elements is of corrosion proof, strong mechanical strength and wear resistance.
6.The machine adopts the double-infrared liquid automatic controller, sensitive automatic pressure protector and the high effective equipment for degas, so it is easy to operate.
7. Carbon fiber infrared heating system that can make the oil contains zero sum of ethyne after treatment.
8. The oil of any grades can be treated on line at the working site.
9. The Automatic oil purifier model is installed with PLC (Programmable logical control system) which can control the equipment automatically to every stage of its process and ensure its process and ensure its safe operation on site and on line without human supervision.
10. Can be operated both on-line and off-line. |
|
| » Posted by: Tongrui Filtration Equipment Manufacturing Co.,ltd [China] |
|
|
|
|
|
[Sell]
Zinc Melting Furnace |
|
|
| Welcome to visit jtfurnace dot com. Zinc Melting Furnace Mainly used for zinc melting and casting etc. Heating: induction, electric, gas, fuel oil. Advantages: 1. Great capacity. 2. easy control. 3. simple construction. 4. easy operation. 5. low energy consumption. 6. fast melting. 7. tight construction. 8. good working environment 9. little melt loss. Detailed product specifications, please email to jtfurnace at hotmail dot com. |
|
| » Posted by: Foshan Jutong Industrial Furnace Co., Ltd [China] |
|
|
|
|
|
[Sell]
Copper Melting Casting |
|
|
| Welcome to visit jtfurnace dot com. Copper Melting Furnace Mainly used for copper melting and casting billet, rod, tube, ingot etc. The equipment is composed by melting furnace, tractor, control system etc. Advantages: 1. Great capacity. 2. easy control. 3. simple construction. 4. easy operation. 5. low energy consumption. 6. fast melting. 7. tight construction. 8. good working environment 9. little melt loss. Detailed product specifications, please email to jtfurnace at hotmail dot com. |
|
| » Posted by: Foshan Jutong Industrial Furnace Co., Ltd [China] |
|
|
|
|
|
[Sell]
Casting Steel Globe Valve |
|
|
| Detailed Product Description Cast Steel Globe Valve Our Main Products: globe valve,ansi globe valve,bs globe valve,din globe valve,jis globe valve,wcb glob VATAC cast globe valve, ISO CE and API Approved Size: 2"~32" Rating: CL150~CL2500 Materials: C.S, S.S, IRON, DUPLEX etc. Cast Flanged Globe Valves are with Features & Specifications as below: Design & Manufacture:ANSI B16.34, BS 1873 OS&Y Construction, Bolted Bonnet Full Port Or Reduced Bore Size Ranges: 2" to 24"N.B. Pressure Ratings: ANSI 150, 300, 600, 900 End Connections:Flanged, Buttweld, Socket Weld, Hub Connectors, Compact Flange or other proprietary connections Materials Available in:WCB, LCB, CF8, CF8M, CF3, CF3M, WC6, WC9, C5, C12 or Equivalent, Available also in low temperature steels, low alloy steels, stainless steels, duplex type stainless steels and other exotic materials;Various trim materials are available to suit service conditions Actuations:Manual, Electric, Hydrau-Pneumatic Actuator To MR 0175 and MR 103 upon Request Notes: The specifications can be designed and satisfied for customers' special requirements We have obtained Certificates of CE, API 6D, API 607, TS and ISO 9001 |
|
| » Posted by: Zhejiang Huaxia Valve Co.,Ltd [China] |
|
|
|
|
|
[Sell]
2PC Extend Thread forged Ball Valve |
|
|
| Detailed Product Description 2PC Extend Thread forged Ball Valve, 800LB,Butt welding ends : ASME B 16.25 Size: 1/2-4" Inspection: API 598 / API6D Applicable Standards: Ball valve : ANSI B16.34 / API6D / BS5351 Anti static : API 608 Face to face: Butt welding ends : ASME B 16.25 Inspection and test : API 598 / API 6D Products Description : Products name: 2PC Extend Thread forged Ball Valve Size: 1/2-4 Pressure Rating: 2000PSI/3000PSI/6000PSI CLASS800/CLASS1500/CLSS2500 Flanged end& Blow-out proof stem& Fire safe construction& Anti static device Ball Type: Floating Ball Port Type:Reduced bore/Full bore Material: A105, F11, F22, LF2, 304, 304L, 316L, 316L, 20# alloy, Monel and Hast. etc. Ball and Stem: SS304, SS316,SS304L,SS316L,SS410,SS416.etc. Valve Seat: PTFE / RPTFE / PCTFE / VITON / PEEK / DEVLON . etc. Operation: Manual Application:Offshore /Oil /Gas /Chemical /Petrochemical Pulp /Paper /Water /Wastewater /Marine Notes: The specifications can be designed and satisfied for customers' special requirements We have obtained Certificates of CE, API 6D, API 607, TS and ISO 9001 |
|
| » Posted by: Zhejiang Huaxia Valve Co.,Ltd [China] |
|
|
|
|
|
[Sell]
double straight edge glass production lines |
|
|
| The automatic table takes upper-casting structure is suitable for processing furmiture glass,solar glass and home appliances glass etc. It takes the advantages of high transferring efficiency and flexible configuration. It is able to be extended to be automatically controlled by laser-code identification system. |
|
| » Posted by: FOSHAN SHUNDE ZHIYANG MACHINERY.CO.,LTD [China] |
|
|
|
|
|
[Sell]
PP oil absorbent cotton |
|
|
1. Material: 100% PP
2. Versatile and cost-effective
3. Absorb spillages of universal liquid and oils
4. Highly absorbing 16 times than its weight in liquid or oil
The oil absorbent products are specifically designed to contain and absorb most oil spills. It exists in different patterns: Oil absorbent pads, oil absorbent mats, oil absorbent pillows, oil absorbent rolls, oil absorbent sheets, oil absorbent socks and so on. They can be used in to absorb and clean and control the polluted area; Each kind meets different required place. It is widely used in the manufacturing, petroleum and chemical, the energy electric power and the shipping industry, the urgent rescue, the harbor, the aviation, the public security fire prevention, the medical service industry laboratory, the environment protection and so on.
|
|
| » Posted by: Nantong Kangda Complex Material Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
Aluminum Homogenizing Furnace, China |
|
|
| Welcome to visit jtfurnace dot com. Aluminum Homogenizing Furnace Homogenizing furnace is the special equipment which heat treated billet after casting and eliminate the residual stress as cast ingot and non-uniformity metallurgical structure and improve the performance of extrusion processing process, improve the production efficiency and aluminum product quality. Advantages: 1. The furnace: Fuel is gas or oil, high efficiency, cart type, with forced cooling chamber; It composes with gas or oil furnace, chamber and feed cart. 2. Capacity: 5T-50T. 3. Billet length: 4m-8.5m 4. Temperature controlled: In 5 Degree Celsius 5. Handling capacity(day) of 35T: 110T cast billet 6. The oil consumption(min): 23-30kg/T AL-billet; Gas: 25-35M3/T AL-billet. 7. It can be used for homogenization treatment of cast ingot for extrusion and also can used for the treatment of calender square ingots. The equipment can be completely automatic control and operation. Detailed product specifications, please email to us jtfurnace at hotmail dot com. |
|
| » Posted by: Foshan Jutong Industrial Furnace Co., Ltd [China] |
|
|
|
|
|
[Sell]
Aluminum Melting Furnace, China |
|
|
| Welcome to visit jtfurnace dot com. Regenerative Aluminum Melting Furnace Mainly used for melting aluminum ingot, especially for discontinuous melting with scrap like waste aluminum. Advantages: 1. Great capacity. 2. easy control. 3. simple construction. 4. easy operation. 5. low energy consumption. 6. fast melting. 7. tight construction. 8. good working environment 9. little melt loss. Detailed product specifications, please email to jtfurnace at hotmail dot com. |
|
| » Posted by: Foshan Jutong Industrial Furnace Co., Ltd [China] |
|
|
|
|
|
[Sell]
Male Thread Butt welded Ball Valve |
|
|
| Detailed Product Description Male Thread Butt Weled Ball Valve,1.6MPa, Applicable Medium:Natural Gas,Manual Gas,Liquefied Gas,oil,water, Tempertaure:30-200 Guang Model With Clamp Butt welding Ball Valve feature: Size:1/4"-2" Pressure: 1000PSI Material: SS304,SS304L,SS316,SS316L Design & Manufacture Std.: API 6D,ASME B16.34 Threaded End: GNPT, BSP, BSPT, DIN259/2999 Test Standard: API598 Structure Type: One-piece, Reduced Bore Operated way: Lever Notes: The specifications can be designed and satisfied for customers' special requirements We have obtained Certificates of CE, API 6D, API 607, TS and ISO 9001 |
|
| » Posted by: Zhejiang Huaxia Valve Co.,Ltd [China] |
|
|
|
|
|
[Sell]
diesel fuel injection /injection pump /DIESEL/DIESEL/DIESEL |
|
|
| Yellow stone diesel ind ltd can supply the diesel fuel injection system parts for\ below engine www{at}yellowstonediesel{at}com ENGINES 1006-6T-D S/N U544809W 1006-6TLR2-PW S/N U544620W 4D84-2GA S/N 04595 4D88E-3B S/N 00101 4D88E-3C S/N 00101 6D125E-2A-5 S/N 60721 6D140-1A S/N 11200 NH-220-CI-1H S/N 40447 S4D102E-1D S/N 26200163 S4D102E-1D-N S/N 26200163 S6D114E-1A-W S/N 30456012 S6D125-1D S/N 10001 S6D140-1A S/N 10001 S6D155-4-R S/N 10014 S6D155-4AA S/N 25887 S6D155-4B S/N 10016 S6D155-4C S/N 10011 S6D155-4E S/N 15182 S6D155-4J S/N 22144 S6D155-4K S/N 22146 S6D155-4R S/N 49181 S6D155-4S S/N 52707 S6D155-4S-DR S/N 52707 SA6D114E-1-GD S/N 45992604 SA6D140-2C-G S/N 22537 SAA6D102E-2DD-8 S/N 26274903 SAA6D102E-2E-8 S/N 26274903 SAA6D108E-2A-8 S/N 19030 SAA6D114E-2AA S/N 26800003 SAA6D125E-3K-8M S/N 310314 SAA6D140E-3N-8 S/N 110003 |
|
| » Posted by: Yellow Stone Diesel Ind Ltd [China] |
|
|
|
|
|
[Sell]
2PC Class 300 Reduce Bore Floating Ball Valve |
|
|
| Detailed Product Description Class300,Size:1-10",Fire-sate and Anti-static device alaiable, Flange Standard:ANSI B16.5.Check and Test:ANSI B 16.34 or API598 Applicable Standards: Ball valve : ANSI B16.34 / API6D / BS5351 Fire safe : API 607 Anti static : API 608 Face to face: ASME B 16.10 Flange ends : ASME B 16.5 Inspection and test : API 598 / API 6D Products Description : Products name: Split body Reduced Bore Flanged Ball Valve Size: 1/2-10 Pressure Rating:CLASS300 Flanged end& Blow-out proof stem& Fire safe construction& Anti static device Ball Type: Floating Ball Port Type: Reduced Bore ISO 5211 Mouting pad Material: WCB, WC6, WC9, LCB, CF8, CF3, CF8M, CF3M, CN7M, Monel and Hast. etc. Ball and Stem: SS304, SS316,SS304L,SS316L,SS410,SS416.etc. Valve Seat: PTFE / RPTFE / PCTFE / VITON / PEEK / DEVLON . etc. Operation: Manual Application:Offshore /Oil /Gas /Chemical /Petrochemical/Pulp /Paper /Water /Wastewater /Marine Notes: The specifications can be designed and satisfied for your special requirements We have obtained Certificates of CE, API 6D, API 607, TS and ISO 9001 |
|
| » Posted by: Zhejiang Huaxia Valve Co.,Ltd [China] |
|
|
|
|
|
[Sell]
MD-340 Paper Carrier Bag making machine |
|
|
Paper carrier bag making machine can make paper sheet into flat bottom bags for shopping
This machine is used for making paper handbags for shopping,and small paper bags for packing gift.
Paper weight 80-230g/m2
Sheet width 680-1180mm
Sheet length 40-600mm
Max.bag size 470X430X150mm
Min bag size 280X250X80mm
Bottom width 80-150mm
Output 40-60pcs/min
Power 12kw
Total weight 10,000kgs
Machine dimension 13,000X1,800X1,600mm
|
|
| » Posted by: Ruian Mingde Machinery Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Middle sealing machine |
|
|
This machine is an ideal facility for producing trademark sheathes of cold drinks, biscuits, mineral water, and batteries, suitable for middle sewing in production of middle-sealing and solid bags among plastic film bags
1. Auto error correction for unreeling
2. Dual-air swelling shaft reeling
3. Optional glue applying device for trademark sheath (thermal shrinkage film)
4. Auto constant temperature control for hot sealing
Model MD-ZF250 MD-ZF300
Max. width 250mm 300mm
speed 35m/min 35m/min
power 2.2kw 2.5kw
Machine weight 500kgs 700kgs
Machine dimension 2800X1050X1100mm 2800X1050X1200mm
|
|
| » Posted by: Ruian Mingde Machinery Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Automatic Electronic High-speed HDPE Disposable Gloves Making Machine |
|
|
Use: Glove is made by HDPE film, which widely used in medical, restaurant and food filed for it's convenient and healthy.
Characteristic:
1.It adopts micro computer contact screen to control, three-phase mixing motor to pull material; and producing piece number can be set up freely.
2.It is suitable for all kinds of moulds, easy operation.
3.Individual in-feeding device
Model MD500
Max.width 200-450mm
Max.length 240-380mm
Making speed 50-150pcs/min
Main motor 1.5kw
Machine dimension 2600X1100X1400mm
Weight 600kg
|
|
| » Posted by: Ruian Mingde Machinery Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Computer control high speed vest and flat rolling bag making machine |
|
|
1. This machine can producing perforation roller vest & flat bags.
2. Technical data:
The machine is controlled by a computer,
Step (servo) setting length system reduces the sealing-cutting dimensions errors, and the installation of photoelectric eyes track help make the position of figure of printing bags accurate. The computer numerical control can be selected to adjust the length of bag the machine will automatically stop and sound a warming if there is something wrong with the printing bags.
Model SHXJ-A500 SHXJ-A600 SHXJ-A800
Max. bag making width 400 500 700
Max. bag making length 1200 1200 1200
Bag making thickness 0.008-0.15 0.008-0.15 0.008-0.10
Bag making speed 120X2PCS 120X2PCS 120X2PCS
Main motor power 1.1 1.5 2.2
Machine weight 900 900 1000
Machine size 3800×1300×1700 3800×1200×1850 3800X1400X1950
|
|
| » Posted by: Ruian Mingde Machinery Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Full automatic high speed T-shirt bag making machine |
|
|
Suitable material: HDPE, LDPE
Can make printed-bags.
With plc, double servo(step) motors
Model MD-DFR-350×2B MD-DFR-450×2B
Max. bag making width 300mm×2 400mm×2
Max. bag making length 600mm 600mm
Bag making thickness 0.015-0.035mm 0.015-0.035mm
Speed 50-200pcs/min×2 50-200pcs/min×2
Air pressure 5kg/cm2 5kg/cm2
Total power 7kw 9kw
Machine weight 1400kg 1600kg
Machine dimension 6000×1400×1600mm 6000×1600×1600mm
|
|
| » Posted by: Ruian Mingde Machinery Co., Ltd. [China] |
|
|
|
|
|
[Sell]
PE Automatic Plastic Shoe Cover Machine |
|
|
PE Automatic Plastic Shoe Cover Machine is one automatic production machine of producing elastic plastic shoe cover, per-minute output is up to 30-50pcs. it is suitable for hospitals and clean industry.
it can finish products from raw materials into the expected completion with a continuous line of automatic equipment, required a person to feed.
1, High output, small size, do not take up space
2, Program computer-controlled, photoelectric detection devices, reliability and high-performance
3, Automatic tension control, debug hot electric welding.
4, Finished appearance beautiful fashion
5, The whole machine with steel structure
6.Suitable material:PE film
Mechanical main configurations:
1,Quartet Steel iron frame, material frame (surface silver-white color and electro coating)
2 Equipped with a set of wearing parts and a set of toolbox
Suitable film: 20%-30% High-pressure plastic film together with 70-80% the low blow plastic film made.
|
|
| » Posted by: Ruian Mingde Machinery Co., Ltd. [China] |
|
|
|
|
|
[Sell]
multifunctional bottom sealing machine |
|
|
with computer-control, frequency-conversion speed-regulation, phofocell tracking, automatic temperature-control, automatic counting and stop, this machine can do bottom-sealing and cutting for soft packaging laminated bags as well as PE film bags.
Model MD-DF350 MD-DF500
Max. bag width 320MM 480MM
Max. bag length 999MM 999MM
Speed 40-200pcs/min 40-180pcs/min
power 4.2kw 6kw
Machine weight 800kgs 1000kgs
Machine dimension 2900X800X1000mm 2900X1000X1000mm
|
|
| » Posted by: Ruian Mingde Machinery Co., Ltd. [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 next»
|
|
|
