|
|
|
|
|
|
|
[Sell]
Wire Mesh Conveyor Belts |
 |
|
Easy to clean and immune to chemical reaction, wire mesh belt is ideal for diverse applications from metalworking to food and cleanroom medical
Shuke Metal Conveyor Belt Manufacturing, Inc. newest development in modular low-profile conveyors features a stainless steel wire mesh belt with exceptional thermal and chemical resistance, combined with a 60% "open flow area." Capable of handling part contact temperatures above 1000°F, the belt construction affords both lateral and longitudinal flow of air or liquids throughout the entire belt, making it ideal for heating, cooling, wash down or flush-and-drain applications.
The conveyor's open belt construction enables easy and thorough cleaning and inspection. Odor and flavor absorption are eliminated because the wire mesh belt is virtually immune to chemical reaction. The conveyor is highly suitable for clean room and food, pharmaceutical and medical equipment applications because there are no belt fibers or plastic abrasion particles to cause contamination.
" The contoured supporting surface of the wire mesh belt affords only minimal contact with the product, making it perfect for handling many food and drug products, or for draining parts that are saturated with coolant or other fluids, which can drain laterally through the belt without contaminating the return side, " said Charles Mitchell, president of Conveyor Technologies.
|
|
» Posted by: Shuke Metal Conveyor Belt Manufacturing, Inc. [China]  |
|
|
|
|
|
[Sell]
Expanded Metal Partitions |
|
|
A partition formed of heasvy expanded-metal lath on thin framing or support members, both sides of which are plastered to form a solid assembly, usually about 1½ to 2½ in. (3.8 to 6.4 cm) thick.
Expanded metal partitions are separate, secure, or store valued items with this easy to install system. Use twenty standard sized panels and steel support posts to build partitions, enclosures, or storage areas of any size or configuration. Unique design conceals all hardware from the exterior of secured area. Full line of hinged, sliding, and vertical rise gates available.
Features:
Twenty standard sized panels 4'0" or 5' 0" high by 1' 0" to 10' 0" wide.
Stack two or more panels between posts to reach wall height.
Standard size panels work in ceilings and walls.
Custom size panels and special heights available.
Hinged, double hinged, sliding, and vertical rise gates available.
Sliding doors have patented tamper resistant latch mechanism.
Angle frame design gives installer clear access to hardware, speeding installation.
Assembly hardware is inaccessible from the secured side of the partition.
Standard 3/8" mounting hardware is the heaviest in the industry.
Heavy duty options available.
Panels may be ordered with any mesh, expanded metal, sheet metal.
|
|
| » Posted by: Ruchang Wire Mesh Partitions Factory [China] |
|
|
|
|
|
[Sell]
Wire Mesh Partitions |
|
|
RuChang supplies every type and sizes of wire mesh pallet racks, heavy storage racks and racks with wire mesh storage desks, ideal for bulk display areas, high temperature environment, suitable for shelving, storage and holding of stuff.
More Made with welded steel wire mesh with open construction, our wire partitions features strength, safety and cleanliness for your storage.
Finish: Made of welded wire mesh then galvanized.
Finishes can be galvanized or coated in different colors.
Benefits: Wire mesh partitions offer rust resistance, smooth touch, bright, shiny outlook, easy for cleaning.
Material: Hard-drawn carbon steel wire.
Processing: Through spot welding, common welding, electrical galvanizing or static plastic powder coating. Zinc coating and powder coating thickness can be customized.
|
|
| » Posted by: Ruchang Wire Mesh Partitions Factory [China] |
|
|
|
|
|
[Sell]
Welded Wire Mesh Partitions |
|
|
Specifications
Wire Mesh Partitions
ISO9001:2008
made of welded wire mesh.
Wire partitions are composed of wire panels, bolts,posts,fram
Applications:
In manufacturing warehouse security, tools cribs, robotic work cells and automation perimeter guarding, vertical life enclosures, system storage lockers, and pharmaceutical wire enclosures.Wire mesh partitions offer a formidable wire barrier to intruders, while allowing the free passage and ventilation system.With modular wire mesh panels, we can accomplish any layout of wire partitions for our customers. Wire mesh partitions can be made with wire fabrics of welded wire mesh, expanded metal mesh, perforated metal and woven wire mesh fabrics.
Materials:Galvanized steel, carbon steel or plastic coated
Wire fabric opening:Diamond mesh or square mesh.
Features:
Easy operation;
Light in weight;
A long service life;
Interchangeable.
Wire mesh partitions are available in standard widths of 1, 2, 3, 4,
and 5 feet, with height of 7, 8, 9, 10, and 12 feet.
The finishes of weled wire partitions can be electro galvanizing, zinc coating or hot dipped zinc coating.
|
|
| » Posted by: Ruchang Wire Mesh Partitions Factory [China] |
|
|
|
|
|
[Sell]
Spring Steel Coil Wire |
|
|
1)Spring Steel Coil Wire
2)Diameter:0.25mm-1.2mm
3)Process:cold-drawing
4)Supface:Smooth
5)Tensile strength:(1200-2900mpa)
DIAMETER(MM) TENSILE STRENGTH(MPa) TORSIONS Min/360
0.30 3000-2010 20
0.45 2600-2200 20
0.60 2500-2110 20
0.80 2400-2010 20
1.00 2300-1960 20
1.20 2250-1910 20
1.40 2210-1860 20
1.60 2160-1810 20
1.80 2110-1760 15
|
|
| » Posted by: SINORAY SPRING WIRE CO. [China] |
|
|
|
|
|
[Sell]
High Carbon Steel Spring Wire |
|
|
Materials for manufacture of high carbon steel spring wire: 60#, 70#, 75#, 72A, 72B, 82B, 65Mn
Wire diameter range: 0.2-12.0mm
Standard followed in producing high carbon steel spring wire: GB4357-89, DIN17223
Packing: In coils, wrapped by gunny cloth
Transport: Loading about 20tons in one 20's container
Finish: Black and galvanized surface
Application: High carbon steel spring wire can be widely used for rolling various precision springs.
|
|
| » Posted by: SINORAY SPRING WIRE CO. [China] |
|
|
|
|
|
[Sell]
Bright Spring Wire |
|
|
Bright Spring Wire
SINORAY spring wire is produced following ISO9000/CE standards.
Material applied for manufacture: 304, 304L, 316, 316L, high quality stainless steel.
Specification: Wire diameter is 0.025mm-5mm,detail specification can be produced according to customer' request.
Features: Bright spring wire offers uniform diameter, smooth surface, color white, durability, anti-
corrosion, acid resistance, high temperature resistance and difficult to wear, good toughness.
Applications: Spring wire is mainly used for making the mesh, screw, regenerated wire, steel cable, metal flexible tube, welding rod core, filter, spring and so on.
|
|
| » Posted by: SINORAY SPRING WIRE CO. [China] |
|
|
|
|
|
[Sell]
Aluminum Expanded Metal |
|
|
Aluminum expanded metal is made of high quality aluminum sheet/coil after being expanded on the automatic expanded machines.
It has the features of light weight, shining appearance, economical, slip-resistance surface, easily to be bent or formed in any direction.
Panel/Roll Width: 36inch, 1Metre, 48inch, 60inch
Panel/Roll Length: from 72inch until 150feet
Note: other Panel/Roll width or length can be made according to request.
Features of Aluminum Expanded Metal:
• Economical
• Durable
• Extremely Versatile
• Easy To Install
• Low Resistance To Wind Loads
• Easily Cut To Fit
• Many Material Options
Streckgitter to make things good for business to create a good service to do the right thing. However, it is more important between people and trusting relationship between the other two, Based on those, we can trust the people you meet needs in all sincerity that trusts are stronger and more new business development and it will be confident and Masu.
Expanded metal sheeet with a certain sequence of the open hole. Pore shape and size of the hole, hole spacing (pitch), a wide variety of applications in use.
1. We manufacture and sell through the global environment can contribute to maintaining world to provide products companies.
2. customer purchases from selected companies.
3. We are to achieve self-realization employees the challenge of space.
Employees of each person, a company can have its own pride and conceive.
Family and friends of relatives of employees the company to be proud.
Customers and our business and our products through a shared sense of satisfaction, and the best products to employees and to share that sense of satisfaction, while everyone is convenient and comfortable for your products to offer We try our breakdown.
|
|
| » Posted by: Streckgitter Expanded Metal Sheet Factory [China] |
|
|
|
|
|
[Sell]
Perforated Louvers |
|
|
Perforated Size: From 0,4 mm. to 120 mm.
Sheet Thickness: From 0,4 mm to 12 mm. (depending on perforation)
Size: 2.000 mm. wide in sheets (depending on perforation).
1.500 mm. wide in roll (depending on perforation).
Material: AISI304, 316
Stainless Steel Perforated Metal is used in the manufacture of:
Basket Strainers
Duplex Strainers
Feed Distributors
Hammer Mill Screens
Strainers
Tee Strainers
Temporary Strainers
Trommel Screens
Vibrating Screeners, round and rectangular, & replacement screens and parts
Y-Strainers
Perforated stainless steel sheet is available in any thickness and material that sheet and plate is available in. The rule of thumb is that the hole size cannot be smaller than the material thickness. Open area ranges between about 30% and 40% are most common.
Standard sheet size is 4' x 10'. Other sizes, and with custom borders can be manufactured.
|
|
| » Posted by: Blatt Perforated Metal Co. [China] |
|
|
|
|
|
[Sell]
Perforated Metal Screen |
|
|
Perforated metal panels and screens for architecture can be used as balcony, partitions, façade, elevator cabinet and other parts of buildings.
Materials: Stainless steel sheets, aluminum or galvanized iron sheets.
Specify the following when order:
Materials;
Hole pattern;
Open area;
Strength;
Hole size and thickness.Typical patterns for perforated screen include slotted, embossed, diamond, square and round.Slotted perforated metal is produced in ferrous materials in plates, stainless steel or galvanized steel.
Oblong Slotted Perforated Metal Screen Information:
3.175 x 25.400 mm oblong slot
6.350 mm centers
Side Staggered
43% open
22 gauge steel
Length of oblong slots run length of sheet.
1/4" Slotted Perforated Metal Screen
6.350 x 38.100 mm slot
Every third bridge 4.763 mm wide
Other bridges 2.381 mm
67% open area of sheets
16, 18, 20 gauge steel
Length of slots runs width of perforated sheet.
Mesh sizes and plate thickness typical available:
Ф DE 1.2X5 D/C 7 X 7.5mm
Ф DE 2X14 D/C 14X21mm
Ф DE 2.5x20 D/C14X25mm
To:
Ф DE 5X20X D/C 16X44mm
Ф DE 8X20 D/C 25X46mm
Custom orders with gauges and sizes available.
|
|
| » Posted by: Blatt Perforated Metal Co. [China] |
|
|
|
|
|
[Sell]
Wrought Iron Fence Panels |
|
|
Wrought iron fence panels are mainly used for ornamental fencing systems. For commercial and residential fences. This is a fully welded iron fence with adjustability for attractive residential perimeter fence or pool fence applications.
Classical wrought iron fence panels for commercial fence offers thicker rails and pickets for commercial applications that may require security. Adjustable panels available for projects that have grade change.
Wrought Iron Fence Panels offer the features & benefits as follows:
Cost effective ornamental iron without sacrificing quality
Coated for an attractive and durable exterior powder coat finish
Virtually maintenance free
Provides beauty, strength and durability
Simple bracket installation and attractive results
Customize with various accessories
Contact us now and import quality wrought iron fence panels from China!
|
|
| » Posted by: Hexi Wrought Iron Fence Co. [China] |
|
|
|
|
|
[Sell]
Wrought Iron Fences |
|
|
Wrought iron fence is an enclosure that is synonymous with safety, protection and privacy, supplied in a variety of styles. Most popular types of wrought iron fences comes in the gothic/romantic styles, including the picket border fence, the hoop, arrow and border fence, the renaissance fence and the Victorian fence. As chief manufacturer and exporter of steel fences, Hexi can supply literally hundreds of different styles of wrought iron and cast iron fences. Whatever your requirements, you will be able to find something that suits you. Our worldwide customers can choose from a variety of decorative elements, including finials, personalized caps, and even coats of arms. Wrought iron gates can also be added to wrought iron fences, and can use both simple key locks and an automated entry system.
Hexi Wrought Iron Fence Co. has a professional design team. We use state of the art technology to demonstrate the end result before we begin production. Not only can we design and produce fencing, but we also offer complete installation by our team of professionals. We only use the highest quality iron materials, and all pickets are solid steel. We are firm believers that the weight of the product determines the quality.
Finish treatment of the iron fences we supply is normally hot-dip zinc and black powder coating. Wrought iron fences make an excellent choice where security is a concern. Hexi wrought iron fences tend to be high enough to keep the unwanted out, and by adding sharp post caps, scaling these fences is almost impossible. Wrought iron fencing also functions to keep large pets and guard dogs safe and secure, they offer an excellent level of security blended with a sophisticated look.
The colour and design of wrought iron lends itself to a formal property and goes well with a well manicured lawn, classic masonry and brick pillars.
Contact us now and import quality wrought iron fences directly from China! |
|
| » Posted by: Hexi Wrought Iron Fence Co. [China] |
|
|
|
|
|
[Sell]
mild steel welding wire |
|
|
Mild steel copper coated welding wire with excellent welding properties and the welding seams have very high impact resistance at low temperature.
Application:
Copper coated mild steel welding wire is used to weld ship building steel(A32 E32 D32 A36 E36 D36) and mild steel products with strength at 490N/mm2 degree, such as mild alloy steel 16Mn and 15Mn to produce furnace, tubes for vessel, container manufacture, etc.
|
|
| » Posted by: TigSure Welding Wire Factory [China] |
|
|
|
|
|
[Sell]
Reinforcing bar Welded Mesh |
|
|
| Reinforcing bar Welded Mesh |
|
| » Posted by: Tatall Welded Wire Products Factory [China] |
|
|
|
|
|
[Sell]
Uniform Moment Wire Rewinding Machine |
|
|
Our wire-rewinding machine is an adjustable uniform rate, constant tension takingup system, which realizes rewinding effect by uniform moment wire-rewinding assembly.
Its main purpose is for annealing and winding of stainless steel wire, copper wire and other metal wires, and the uniform moment wire-rewinding assembly may used in combination or in single.
Specification (Axle No.)
Dimension (mm)
Design Wire Diameter for Assembly (mm)
32
2700×100×120
①0.03-0.10
②0.10-0.30
③0.30-1.25
④0.25-1.25
44
4200×100×120
48
4400×100×120
60
6000×120×120
|
|
| » Posted by: Changjing Wire Drawing Machinery Co. [China] |
|
|
|
|
|
[Sell]
Wet Type Wire Drawing Machines |
|
|
Aplication:
The water-tank series wire-drawing machines is in wet type to draw low- , mid- ,and high-carbon steel wires ,as well as non-ferrous materials , with swift speed , high quality and good reputation . it , s the most ideal equipment for steel wires and ropes , galvanized wires , and electric wires manufacturers.
|
|
| » Posted by: Changjing Wire Drawing Machinery Co. [China] |
|
|
|
|
|
[Sell]
Coated Alkaline-resistant Fiberglass Mesh |
|
|
We supply various fiberglass screen, glass fibre insect screening and coated alkaline-resistant fiberglass mesh for a variety of industries. Coated alkaline-resistant fiberglass mesh for geotextile fabrics in various constructions of walls and buildings.
This kind of reinforced fiberglass mesh is made from fiberglass woven roving as its basis material, then is treated by alkali-resistant macromolecule latex.
Coated alkaline-resistant fiberglass mesh has excellent properties like high alkali-resistance, good cohesion, flexibility, tensile strength, etc. This kind of fiberglass mesh can be widely used in wall heat reservation system, water proof and preventing cracks.
Common Specification of Coated Alkaline-resistant Fiberglass Mesh:
1.Fiberglass Mesh size:5×5mm,4×5mm or 4×4mm;
2.Weight/m2:80g--160g;
3.Fiberglass Mesh Length/roll:50m,100m or 200m;
4.Fiberglass Mesh Width/roll:1m--2m;
5.Colors available for fiberglass mesh: white(standard),blue, green or other colors;
6.Special products are available according to requirement of customers.
For our fiberglass reinforced mesh fabrics, send email to: meshwire09@yahoo.com
|
|
| » Posted by: FeiYaDe Fiberglass Mesh Factory [China] |
|
|
|
|
|
[Sell]
Fiberglass GeoGrid / Geotextile Fabric |
|
|
Fiberglass GeoGrid / Geotextile Fabric is a kind of new model materials for reinforcement of road surface and bases. This product is made with coated fiber glass yarn.
Features: Fiberglass griding fabric or cloth offers high tensile strength in both vertical and horizontal direction, low elongation, high elastic modulus, high and low temperature resistant properties. Fiberglass griding fabric offers excellent anti-aging properties and anti-alkali property after being coated.
Uses of Fiberglass GeoGrid Fabrics: It is widely used in asphalt pavement, the enhancement of cement and concrete pavement of road. Compared with the traditional road, using fiberglass geogrid fabric can reduce costs, increase long work life and prevent reflective crack of road. This kind of fiberglass fabrics can also be used in reinforcing of soft soils and road root for railways, airports, water conservancy, dams, etc.
For our fiberglass reinforced mesh fabrics, send email to: meshwire09@yahoo.com
|
|
| » Posted by: FeiYaDe Fiberglass Mesh Factory [China] |
|
|
|
|
|
[Sell]
brass wire cloth |
|
|
Brass is an alloy of Copper and Zinc. It has much better abrasion resistance, better corrosion resistance and lower electrical conductivity as compared with copper.
Phosphor bronze is an alloy of Tin, phosphorus and Copper. It is corrosion-resisting, wear-resisting, tear-resisting.
Brass and Phosphor bronze are extensively used in sieving diversified pellet, powder, porcelain clay and glass, chinaware printing, filtering liquid and gas.
We can manufacture Brass wire cloth form 6 to 225 mesh, and Phosphor broze wire cloth from 6 to 500mesh. The following specification are listed for your reference.
|
|
| » Posted by: Telas Wire Cloth Co. [China] |
|
|
|
|
|
[Sell]
welded wire cloth |
|
|
Telas Wire Cloth Co. is experienced in producing welded wire mesh of full range of roll sizes, opening, wire diameter and various wire materials.
According to materials, we can offer electric galvanized welded wire mesh; hot-dip galvanized welded wire mesh and welded stainless steel wire mesh.
According to the wire diameter and opening, we can offer standard welded wire mesh or heavy type welded wire mesh.
Differernt processing means we offer for your choice include: hot-dip galvanized welding wire mesh; hot-dip galvanized before welding wire mesh; electric-galvanised after welding wire mesh; electric-galvanised before welding wire mesh.
|
|
| » Posted by: Telas Wire Cloth Co. [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 next»
|
|
|
