|
|
|
|
|
|
|
[Sell]
Silicon carbide (SiC) powder |
 |
|
China Abrasives Import & Export Corporation is the Chairman of China Abrasives Association, the Chairman of Artificial Corundum Branch and the Chairman of SiC Branch of China Chamber of Commerce of Metals Minerals & Chemicals Importers & Exporters. We can provide SiC grit, micro-powder, nano crystalline powder and whisker.
What can offer are listed below:
Grit and powder:
Green SiC powder for re-crystallized applications;
Green SiC micro powder for polishing applications;
Green SiC micro powder for wire sawing applications;
Green SiC powder for reaction bonded applications;
Green SiC powder for sintered applications;
Black SiC for refractory applications;
Green SiC powder for diesel particulate filters (DPF);
SiC for abrasive applications;
SiC for metallurgical applications;
Nano crystalline SiC power and whisker.
If you are intreasted about our products, please feel free to write to me: alleninbiz(a)gmail.com.
|
|
» Posted by: China abrasives import & export corporation [China]  |
|
|
|
|
|
[Sell]
Silicon carbide corrugated brick for zinc smelting |
|
|
Our Corrugated tile is designed to replace traditional square SiC brick in zinc smelting furnace especially the vertical retorting furnace. It has larger surface area when compared with quadrel of the same size. Its excellent performance includes:
a. Efficiently enlarge the thermal radiation area, accelerate the thermal exchange and speed up the chemical reaction which can effectively save power;
b. High strength, good anti-washing resistance and high oxidation resistance lead to long service life;
c. More importantly, increase production and reduce the cost.
Available Size:
Length: 230-1000 mm; width: 110-300 mm; thickness: 65-200 mm.
Or according to clients’ demands.
Applications:
Zinc vertical distillation furnace, electric furnace, airheater.
Typical Technical Parameter:
SiC: > 85%;
Porosity: < 13%;
Volume Density: > 2.65 g/cm3;
Thermal Conductivity: > 15.5 W/ (m.K);
Compressive Strength (bluk): > 205 MPa;
Flexural Strength (bulk): > 50 MPa;
Working Temperature: 1000-1400 °C.
If you are intreasted about our products, please feel free to write to me: alleninbiz(a)gmail.com. |
|
| » Posted by: China abrasives import & export corporation [China] |
|
|
|
|
|
[Sell]
Clay bonded silicon carbide tower tray (plate) for zinc smelting |
|
|
Our tower tray is designed with excellent performance including high strength, good anti-washing resistance of molten zinc, high oxidation resistance and long service life.
Available Size:
990 mm × 457 mm × 165 mm, 1260 mm × 620 mm × 180 mm, 1372 mm × 762 mm × 180 mm, or according to clients’ demands.
Applications:
Designed for zinc vertical retorting.
Typical Technical Parameter:
SiC: > 90%;
Porosity: < 12%;
Volume Density: > 2.7 g/cm3;
Thermal Conductivity: > 15.5 W/ (m?K);
Compressive Strength: > 195 MPa;
Flexural Strength: > 40 MPa;
Working Temperature: 1000-1400 °C.
If you are intreasted about our products, please feel free to write to me: alleninbiz(a)gmail.com.
|
|
| » Posted by: China abrasives import & export corporation [China] |
|
|
|
|
|
[Sell]
Nitride bonded silicon carbide (NBSC) rotor for zinc smelting |
|
|
Our NBSC rotor is designed for excellent performance including easily replaceable and repairable separated shaft and impeller, good anti-washing resistance of molten zinc, high condensation efficiency and long service life.
Available Size:
Rotor shafts: diameter Φ50 mm-Φ150 mm, length 300-1700 mm;
Rotor impellers: diameter Φ100 mm-Φ380 mm, thickness 40-80 mm.
Or according to clients’ demands.
Applications:
Rotor for splash condenser in electric zinc furnace or vertical retorting furnace.
Typical Chemical Analysis:
SiC: > 80.00%;
Si3N4: > 15.00%;
Free-Si: < 0.20%;
Fe2O3: < 0.20%.
Typical Technical Data:
Porosity: < 15%;
Volume Density: > 2.70 g/cm3;
Compressive Strength: > 120 MPa;
Degassing Efficiency: > 50%;
Revolutions: 300-750 rpm;
Working Temperature: 1000-1400 °C;
Service Life: > 50 days.
If you are intreasted about our products, please feel free to write to me: alleninbiz(a)gmail.com. |
|
| » Posted by: China abrasives import & export corporation [China] |
|
|
|
|
|
[Sell]
Smelting furnace used for brown aluminum oxide |
|
|
China abrasives import & export corporation (CAEC) is China's leading company in the market of BFA. It is a state-owned company subordinated to China National Machinery Industry Corporation (SINOMACH) which is the nation's largest corporation in machinery industry. We have experience in designing various furnaces used for smelting BFA for many Chinese companies. Our proper design of the product line can greatly save the cost. The technical advantages of our product are listed below.
a. High conversion of the raw materials, low materials waste;
b. Low power consumption;
c. Well wiring design, high safety;
d. Easy to operate, less operators, , high working efficiency;
e. Novel cooling system, long furnace service life;
f. Special dust collection system, low environment pollution.
Available Capacity:
Fixed furnace: 5000 kVA, 4000 kVA, 3600 kVA, 1800 kVA;
Tilting furnace: 10000 kVA, 7500 kVA, 6300 kVA, 5000 kVA, 4000 kVA, 3000 kVA;
Or according to clients' demands.
If you are intreasted about our products, please feel free to write to me: alleninbiz(a)gmail.com.
|
|
| » Posted by: China abrasives import & export corporation [China] |
|
|
|
|
|
[Sell]
upcast equipment for copper alloy and oxygen free copper |
|
|
Our company is wholly-owned by China National Machinery Industry Corporation (SINOMACH) which is China's largest corporation that specialized in complete equipment design and manufacture. Our product for upward (and horizontal) casting of copper alloys and OFC is the most advanced and efficient in China market. In the passed 20 years, we have provide Vietnam, Brazil, Iron, Thailand and South Korea with more than 200 sets of equipment for copper rod (Ф8-30 mm), belt (width 170-300 mm, thickness 0.6-4.5 mm) and pipe (horizontal casting).
1. Equipment type: OFCE-1;
2. Annual capacity: 1000-15000 ton;
3. Annual working time: 300 days;
4. Furnace type:
Single furnace,
Double furnace: smelting furnace ×1, keeping furnace ×1,
Triple furnace: smelting furnace ×2, keeping furnace ×1;
5. Power consumption in smelting copper: <335 kWh/ton;
6. Number of casting strands: 4-24;
7. Casting rod diameter: Ф8-30 mm;
8. Casting speed: 200-3200 mm/minute;
9. Upward pitch: 1-5 mm;
10. Casting rod clamping method: cylinder type;
11. Liquid tracking precision: ±1 mm;
12. Coil diameter: Ф 600-1800 mm;
13. Coil weight: 2-5 ton;
14. Coiling mode: full automatic;
15. Cathode charging: whole piece, automatic;
16. Console interface: big screens can display data intuitively, touch screen combined with mechanical press buttons can reduce misoperation efficiently, automatic date saving can make your supervision of the process conveniently.
If you are intreasted about our products, please feel free to write to me: alleninbiz(a)gmail.com.
|
|
| » Posted by: China abrasives import & export corporation [China] |
|
|
|
|
|
[Sell]
Graphite molds for copper continuous casting |
|
|
Our company is wholly-owned by China National Machinery Industry Corporation (SINOMACH) which is the largest Chinese company that specialized in complete equipment design and manufacture. Besides whole set upward (and horizontal) casting equipments, we can also provide the components for the equipment. For upward casting equipment, the components that we can provide are listed here.
Furnaces and refractory bricks; crystallizer parts; graphite die moulds and protection kits; thermocouples and protection tubes; floats for liquid level tracking; aluminum silicate blankets and inner linings; molten channel; rod roller; Calcium Hexaboride and flake graphite.
Of course, we can offer products for casting process of steel, stainless steel, gold and other non-ferrous. All these products mentioned here can be customized.
The following are the information of our graphite die moulds for copper continuous casting.
Available Type and Size:
For rod: Ф8-30 mm;
For pipe (horizontal casting): OD max Ф35 mm;
For belt: width 170-300 mm, thickness 0.6-4.5 mm.
Typical Chemical Analysis:
F.C.: > 99.99%;
Ash content: < 0.01%;
Density: > 1.90 g/cm3;
Porosity: < 15%;
Average Pore Size: 2.2 mm;
Electric Strength: > 9.0 Ωmm2/m;
Flexural Strength: > 45 MPa;
Compressive Strength: > 90 MPa;
Thermal Expansion Coefficient: < 4.5×10-4 m/K.
If you are intreasted about our products, please feel free to write to me: alleninbiz(a)gmail.com.
|
|
| » Posted by: China abrasives import & export corporation [China] |
|
|
|
|
|
[Sell]
Aluminum titanate stalk (riser) tube and dosing tube |
|
|
Our aluminum titanate ceramic stalk tube (or riser tube) is designed for die casting of molten aluminum, aluminium alloys, magnesium alloys and copper alloys. The advantages of our product are listed below:
a. High melting point;
b. Excellent thermal conductivity, low thermal expansion;
c. High washing resistance and thermal shock resistance;
d. Low wettability with the melts;
e. High cost performance, long service life.
Also we can supply stalk (riser) tubes made of other materials or by different process, for example, Si3N4 (SSN, RBSN, G.P.S-SN, HPSN), nitride bonded SiC, O’-SiAlON, dense fused silica and coated cast iron. Please contact us if interested.
Available Size and Types:
ID max: Φ200 mm, Length max: 1700 mm;
Metal flange type or one body type.
Applications:
Low pressure die casting and counter pressure die casting of molten aluminum, aluminum alloys, magnesium alloys and copper alloys.
Typical Technical Data:
Porosity: < 6.5%;
Bulk Density: > 3.20 g/cm3;
Flexural Strength: > 50 MPa;
Thermal Conductivity (600-800 °C): > 0.5 × 10-6 W/ (m?°C);
Thermal Expansion (800 °C): < 0.80 × 10-6/ °C.
If you are intreasted about our products, please feel free to write to me: alleninbiz(a)gmail.com.
|
|
| » Posted by: China abrasives import & export corporation [China] |
|
|
|
|
|
[Sell]
Nitride bonded silicon carbide stalk (riser) tube |
|
|
Our NBSC stalk tube (or riser tube) is designed for die casting of molten aluminum, aluminium alloys, magnesium alloys and copper alloys. As replacement of cast iron and old ceramic ones, our product has some exceptional features as follows:
a. High density, high mechanical strength;
b. Excellent thermal conductivity, low thermal expansion;
c. High washing resistance, oxidation resistance, acid resistance and thermal shock resistance;
d. Low wettability with the melts, bring minimum impurities to the melts;
e. High cost performance, long service life.
Also we can supply stalk (riser) tubes made of other materials or by different process, for example, Si3N4 (SSN, RBSN, G.P.S-SN, HPSN), O’-SiAlON, aluminum titanate, dense fused silica and coated cast iron. Please contact us if interested.
Available Size & Types:
ID max: Φ220 mm; Length max: 1700 mm;
Metal flange type or one body type.
Applications:
Low pressure die casting and counter pressure die casting of molten aluminum, aluminum alloys, magnesium alloys and copper alloys.
Typical chemical analysis: SiC: > 70.00%; Si3N4: >20.00%; Free-Si: < 0.20%; Fe2O3: < 0.15%.
Typical Technical Data:
Porosity: < 11%;
Bulk Density: > 2.65 g/cm3;
Compressive Strength: > 175 MPa;
Flexural Strength: > 70 MPa;
Thermal Conductivity (1400 °C): > 16.5 × 10-6 W/ (m?°C);
Thermal Expansion (20-1400 °C): < 4.6 × 10-6/ °C;
Maximum Working Temperature: 1550 °C.
If you are intreasted about our products, please feel free to write to me: alleninbiz(a)gmail.com.
|
|
| » Posted by: China abrasives import & export corporation [China] |
|
|
|
|
|
[Sell]
Nitride bonded silicon carbide heater protection tube |
|
|
Our product is designed for smelting or casting of molten aluminum, aluminium alloys, magnesium alloys, zinc and copper alloys.
a. High density, high mechanical strength;
b. Excellent thermal conductivity, low thermal expansion;
c. High washing resistance, oxidation resistance, acid resistance and thermal shock resistance;
d. Low wettability with the melts, bring minimum impurities to the melts;
e. High cost performance, long service life.
Also we can supply Si3N4 (SSN, RBSN, G.P.S-SN, HPSN), O’-SiAlON tubes. Please contact us if interested.
Available Size & Types:
ID max: Φ220 mm, Length max: 1700 mm;
Vertical type (metal flange type, one body type), horizontal type and pencile type.
Applications:
Low pressure die casting and counter pressure die casting of molten aluminum, aluminum alloys, magnesium alloys and copper alloys; zinc smelting.
Typical chemical analysis: SiC: > 72.00%; Si3N4: >25.00%; Free-Si: < 0.20%; Fe2O3: < 0.15%.
Typical Technical Data:
Porosity: < 11%;
Bulk Density: > 2.60 g/cm3;
Compressive Strength: > 175 MPa;
Flexural Strength: > 70 MPa;
Thermal Conductivity (1400 °C): > 16.5 × 10-6 W/ (m?°C);
Thermal Expansion (20°C-1400 °C): < 4.0 × 10-6/ °C;
Maximum Working Temperature: 1550 °C. |
|
| » Posted by: China abrasives import & export corporation [China] |
|
|
|
|
|
[Sell]
Graphite degassing rotor |
|
|
Our graphite rotor is made from high quality graphite powders, designed for excellent performance including easily replaceable and repairable separated shaft and impeller, good washing resistance of molten aluminum, high oxidation resistance, high-speed and efficient dispersal and removal of hydrogen and other unwanted particles, long service life.
Available Size:
Rotor shafts: diameter Φ50 mm-Φ150 mm, length 300-1700 mm;
Rotor impellers: diameter Φ100 mm-Φ380 mm, thickness 40-80 mm.
Applications:
Rotating degassing system for molten aluminum and aluminum alloys.
Typical Chemical Analysis:
Fixed-C: > 99.90%;
Moisture: < 0.10%;
Ash: < 0.10%;
Volatile Matter: < 0.10%.
Typical Technical Data:
Porosity: < 12%;
Volume Density: > 1.80 g/cm3;
Compressive Strength (bulk): > 60 MPa;
Oxidation Rate (750 °C): < 10 mg/ (cm2?hour);
Degassing Efficiency: > 50%;
Revolutions: 200-750 rpm;
Working Temperature: 650-800 °C;
Service Life: 50-60 days. |
|
| » Posted by: China abrasives import & export corporation [China] |
|
|
|
|
|
[Sell]
Nitride bonded silicon carbide (NBSC) degassing rotor |
|
|
Our NBSC rotor is designed for excellent performance including easily replaceable and repairable separated shaft and impeller, good washing resistance of molten aluminum, high oxidation resistance, high-speed and efficient dispersal and removal of hydrogen and other unwanted particles, long service life.
Available Size:
Rotor shafts: diameter Φ50 mm-Φ150 mm, length 300-1700 mm;
Rotor impellers: diameter Φ100 mm-Φ380 mm, thickness 40-80 mm.
Applications:
Rotating degassing system for molten aluminum and aluminum alloys.
Typical Chemical Analysis:
SiC: > 75.00%;
Si3N4: > 20.00%;
Free-Si: < 0.20%;
Fe2O3: < 0.20%.
Typical Technical Data:
Porosity: < 13%;
Volume Density: > 2.70 g/cm3;
Compressive Strength: > 170 MPa;
Degassing Efficiency: > 65%;
Revolutions: 200-750 rpm;
Working Temperature: 650-1400 °C;
Service Life: >120 days. |
|
| » Posted by: China abrasives import & export corporation [China] |
|
|
|
|
|
[Sell]
Silicon carbide (SiC) ceramic foam filter for non-ferrous |
|
|
Our product is designed for filtering or purifying of molten aluminum, aluminium alloys, magnesium alloys and copper alloys in their smelting or casting process.
a. Excellent thermal conductivity and washing resistance;
b. Bring no impurities to the melts;
c. Long service life.
Also we can supply alumina, zirconia and magnesia based ceramic foam filters for ferrous or steel melts.
Available Specs:
PPI: 10-60;
Maximum Thickness: 50 mm;
Maximum Length (Diameter): Φ600 mm.
Typical Technical Data:
SiC: 65-75%, Al2O3: 22-35%, SiO2: 3-8%, Fe2O3 < 0.15%;
Porosity: 80-95%;
Volume Density: < 0.40-0.60 g/cm3;
Compressive Strength: > 2.20 MPa;
Flexural Strength: > 1.00 MPa;
Thermal Shock Resistance (1110 °C): > 7 times;
Working Temperature: < 1500 °C. |
|
| » Posted by: China abrasives import & export corporation [China] |
|
|
|
|
|
[Sell]
Conveyor Belt |
|
|
Conveyor Belt,wire belt,wire mesh belt
www.wiremeshdragon.cn www.papermachineclothings.com flydragon00071@hotmail.com
Conveyor belt wire mesh Material: stainless steel wire, galvanized iron wire, nickel chrome wire, copper wire, polyester wire, etc...
Application: widely using for the special metallic mesh-belt in the industries of petroleum, metallurgy, foods, mining and medical
We offers good quality wire mesh conveyor belt and parts for customers. Mainly super-thin mesh belt, woven wire conveyor belt with chain side, flat wire conveyor belt and woven wire conveyor belt with flight. We also supply sprocket for belt. For further information or business inquiry, please contact us. |
|
| » Posted by: Fly Dragon Wire Mesh Co.,Ltd [China] |
|
|
|
|
|
[Sell]
wire mesh machine |
|
|
wire mesh machine,barbed wire machine,welding mesh machine,wire weaving loom,wire drawing machine
www.wiremeshdragon.cn www.papermachineclothings.com flydragon00071@hotmail.com
machines are applied in production of woven wire mesh, welded mesh, perforated metal, expanded metal, fiberglass mesh, barbed wire, razor wire and much more. Also equipment for treating wire like wire galvanizing, wire drawing, etc. Finished products can meet the quality of our National Standard and international standard. Arch also supplies necessaries parts and accessories for the machines, for example, wire winding and coiling machine for hexagonal wire netting. Custom orders can be discussed to meet the specific requirement for roll width, wire diameter, mesh opening and other technical data. Browse now and build your own plants with less cost.
|
|
| » Posted by: Fly Dragon Wire Mesh Co.,Ltd [China] |
|
|
|
|
|
[Sell]
Hot Rolled Ribbed Steel Bar |
|
|
Spiral ribbed steel bar is a kind of cold rolled steel bar ranging commonly from 5mm to 12mm.
COLD ROLLED RIBBED BAR/WIRE:
(1): Standard:GB13788-2000;
(2) Grade: CRB550; CRB650; CRB800; CRB900; CRB1170;
(3) Diameter: 5.0mm; 5.5mm; 6.0mm; 8.0mm, 10mm; 12mm;
(4) Rid: three side half monn size, or customized.
(5) Packing : Coil:1.0-2.0tons/coil; or Length: 2.0---12m/bundle;
(6) Packing: Coil and bundles with six steel strip tie.
(7) Tensile strength: CRB50>=550Mpa; CRB650>=650Mpa; CRB800>=800Mpa;
CRB900>=900Mpa; CRB1170>=1170Mpa.
http://www.reinforcingsteelbar.com
|
|
| » Posted by: JinDing Reinforcing Steel Bar Manufacture Co. [China] |
|
|
|
|
|
[Buy]
Second hand textile machinery |
|
|
We Polani Corporation would like to introduce ourselves as a dealer of
Used/Secondhand Textile Machinery & Power Generators in Pakistan.
At the moment we are looking to purchase following used/secondhand textile
machines for our potential customers:
- SULZER TW11, PU or P7100 Weaving Projectile Looms
Working Width 85” / 110" / 130" / 153”
Single Color, Cam Motion & 2 or 4 Colors Dobby
- Sulzer F2001 or G6100 Rapier Looms
Working Width 190 cm
Mechanical or Electronic Dobby
- Hisaka Jet Dyeing Machines
Single Tube or Double Tube
If you have any of above machines available then please send us the offer
with complete details, photographs and best competitive prices.
Sohail Polani
Polani Corporation
Tel: (92-21) 32566492 / 32566493 / 32566494
Fax: (92-21) 32563587
E-mail: info@polanico.com
Web: www.polanico.com
Skype: polanicorp |
|
» Posted by: Polani Corporation [Pakistan]  |
|
|
|
|
|
[Sell]
plywood processing machine |
|
|
Widja star machinery exporting and processing woodworking machine ,timber machine ,lumber machine ,softwood machine ,hardwood machine ,blockboard machine .
www.widjastar.cn |
|
| » Posted by: widja star machinery [China] |
|
|
|
|
|
[Sell]
sell VFD insulation oil purifier(sinonsh315) |
|
|
NSH VFD series is mainly used to improve the properties of insulation oil. It can remove trace water, gas, particulate matters etc. from the insulating oil effectively and rapidly so as to boost performance of transformers, circuit breakers, mutual inductors, cable and capacitors which has insulation system. VFD series specialize in purifying branded oil, insulating oil of high voltage and super high voltage transformer. Additionally, it is suitable for treating low viscosity lubrication oil.
Edges of VFD
* High efficiency and effectiveness.
* Enhance the value of breakdown voltage greatly.
* Easy handling and maintenance.
* Online work.
* Lower maintenance and replacement expenses.
* Small size, light weight, low noise
* Various sizes and configurations (shield) available.
Thanks and regards.
Sophia Zheng
Sino-NSH Oil Purifier Manufacture Co. Ltd.
E-mail: sinonsh315@sino-purification.com
http://www.sino-purification.com
http://www.ec51.com/sinonsh315
http://www.ec21.com/sinonsh315
MSN: sophia-dan09@hotmail.com
Skype: sophia-dan09
Tel: 0086-23-67755736
sinonsh315 |
|
| » Posted by: Sino-NSH Oil Purifier Manufacture Co. Ltd. [China] |
|
|
|
|
|
[Sell]
sell GER used engine oil regeneration system(sinonsh315) |
|
|
NSH GER Used Oil Regeneration System is particularly suitable to regenerate used internal-combustion engine oil including diesel engine oil, gasoline engine oil and used hydraulic oil, other used machinery lubrication oil. GER series are able to effectively remove colloid, oxid, acid, pitch, particles, impurities, water, gas in the used oil. Specially, GER can restore the color of used oil and remove the scent rapidly.
Edges of GER
* Two main filtering systems ensuring continuous work.
* No acid used during operation.
* Stainless steel made filters.
* Remove exhaust gas quickly and efficiently.
* Heat preservation material keeping high efficient heating.
* Turnkey Project.
* Purify blended oils.
* Low operation cost.
* Low maintenance and replacement expenses.
* High regeneration rate.
* Automatic reverse-washing system improving performance of filters.
* High performance security system.
* Small size, light weight, low noise.
Thanks and regards.
Sophia Zheng
Sino-NSH Oil Purifier Manufacture Co. Ltd.
E-mail: sinonsh315@sino-purification.com
http://www.sino-purification.com
http://www.ec51.com/sinonsh315
http://www.ec21.com/sinonsh315
MSN: sophia-dan09@hotmail.com
Skype: sophia-dan09
Tel: 0086-23-67755736
sinonsh315 |
|
| » Posted by: Sino-NSH Oil Purifier Manufacture Co. Ltd. [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 next»
|
|
|
