|
|
|
|
|
|
|
[Sell]
Motor Oil Treatment Lube Oil Refinery Oil Separator Oil Regeneration filter |
 |
|
Engine Oil Regeneration System(Used Oil Purifier, oil filtration, oil separator, , Oil filter, oil cleaner, oil refining, oil recycled, Oil Purification, Oil purify, Oil Recovery, Oil Processing, Oil Filtering, Oil Treatment, Oil Recycling, Oil Restoration, Oil disposal, Oil Reclamation, waste oil purifier, oil reconditioned, oil reconstituted, oil remediation, oil reactivation, energy saving, waste oil management, oil machine, oil recuperate)
Application
NSH GER engine oil regeneration System is particularly suitable to regenerate internal-combustion engine oil including diesel engine oil, gasoline engine oil and internal-combustion engine oils. GER series can effectively remove colloid, oxid, acid, pitch, particles, impurities, water, gas in the oil. Specially, GER can restore the color of used internal-combustion engine oil and remove the scent rapidly.
Advantages of GER
Design according to different customers needs.
Purify blended oils.
Low operation cost.
Low maintenance and replacement expenses.
High regeneration rate.
Automatic reverse washing system will extend the lifetime and improve the performance of the filters.
High performance security system including pressure protection device and automatic temperature controller makes purifier operated safely.
Small size, light weight and low noise.
Test report of treatment of used CC40 diesel engine oil
Item Unit Theory index Treated oil index
flow viscosity 100 2/s 12.5-16.3 11.6
Flash point 220 232
Acid mgkoH/g 2.0 0.04
Impurity % 0.01 0.006
Water-solubility acid or alkali / no
viscosity index 80 91
Pour point -10 -26
Sulfate ash / 0.172
Technical Specifications
Item Unit
GER-1,GER-2,GER-3,GER-4,GER-5
CapacityL/8 -10hrs 2000,4000,6000,8000,10000
Weight kg
2000,3000,4500, 6500,6700
Regeneration Rate 70-90
Working Pressure MPa -0.095-0.4
Temperature 60-200
Working Noise dB 90
Inlet/Outlet Pipe Diameter Mm 42
There are other types of this series depend on your need. If you interested them, please give me a message with your e-mail and other details.
We will deal with all your questions professionally.
NSH Product Catalogue
Engine oil regeneration series
GER Used Gas engine oil regeneration system
Insulation Oil Series
VFD Double-Stage High-Efficiency Vacuum Insulation Oil Purifier
VFD-A Double-Stage Vacuum Insulation Oil Automation Purifier
VFD-R Double-Stage Vacuum Insulation Oil Regeneration Purifier
VFD-T Double-Stage Vacuum Insulation Oil Purifier with Tester
Turbine Oil series
TF Turbine Oil Purifier
TF-A Turbine Oil Automation Purifier
TF-R Turbine Oil Regeneration Purifier
Lubrication Oil series
LV Lubrication Oil Purifier
LV-A Lubrication Oil Automation Purifier
LV-R Lubrication Oil Regeneration Purifier
Flame-resistant Oil series
FV Flame-resistant Oil Purifier
FV-A Flame-resistant Oil Automation Purifier
Explosion-proof series
EV Explosion-proof Vacuum Purifier
EV-A Explosion-proof Vacuum Purifier
EP Explosion-proof Precision Filtering Purifier
EP-A Explosion-proof Precision Filtering Purifier
De-impurity series
PF Precision Purifier
PF-A Precision Automation Purifier
Spare parts
Filters
PVC steel wire reinforce hose
|
|
» Posted by: Sino-nsh oil purifier manufacture co.,ltd [China]  |
|
|
|
|
|
[Sell]
waste engine oil recycling oil disposal oil recovery oil processor |
|
|
Engine Oil Regeneration System(Used Oil Purifier, oil filtration, oil separator, Oil filter, oil cleaner, oil refining, oil recycled, Oil Purification, Oil purify, Oil Recovery, Oil Processing, Oil Filtering, Oil Treatment, Oil Recycling, Oil Restoration, Oil disposal, Oil Reclamation, waste oil purifier, oil reconditioned, oil reconstituted, oil remediation, oil reactivation, energy saving, waste oil management, oil machine, oil recuperate)
Application
NSH GER engine oil regeneration System is particularly suitable to regenerate internal-combustion engine oil including diesel engine oil, gasoline engine oil and internal-combustion engine oils. GER series can effectively remove colloid, oxid, acid, pitch, particles, impurities, water, gas in the oil. Specially, GER can restore the color of used internal-combustion engine oil and remove the scent rapidly.
Advantages of GER
Design according to different customers needs.
Purify blended oils.
Low operation cost.
Low maintenance and replacement expenses.
High regeneration rate.
Automatic reverse washing system will extend the lifetime and improve the performance of the filters.
High performance security system including pressure protection device and automatic temperature controller makes purifier operated safely.
Small size, light weight and low noise.
Test report of treatment of used CC40 diesel engine oil
Item Unit Theory index Treated oil index
flow viscosity 100 2/s 12.5-16.3 11.6
Flash point 220 232
Acid mgkoH/g 2.0 0.04
Impurity % 0.01 0.006
Water-solubility acid or alkali / no
viscosity index 80 91
Pour point -10 -26
Sulfate ash / 0.172
Technical Specifications
Item Unit
GER-1, GER-2, GER-3, GER-4, GER-5
CapacityL/8 -10hrs 2000, 4000, 6000, 8000, 10000
Weight kg
2000, 3000, 4500, 6500, 6700
Regeneration Rate 70-90
Working Pressure MPa -0.095-0.4
Temperature 60-200
Working Noise dB 90
Inlet/Outlet Pipe Diameter Mm 42 |
|
| » Posted by: Sino-nsh oil purifier manufacture co.,ltd [China] |
|
|
|
|
|
[Sell]
Transformer Oil Treatment Insulation Oil Recovery Oil Recycling Equipment |
|
|
Transformer Oil Purifier(oil recycling, oil refining, oil recycled, Oil cleaner, oil refinery ,oil separator, oil machine, Oil Regeneration, Oil Purification, Oil purify, Oil Recovery, Oil Processing, Oil Filtering, Oil Filtration, Oil Treatment, Oil Restoration, Oil disposal, Oil Reclamation, waste oil disposal, oil reclaiming, waste oil management, energy saving, oil reconditioned, oil reconstituted, oil restituting, oil recovering, oil recuperation, oil filtrating, used oil, industrial oil, oil remediation, oil remediation, oil reactivation)
Application
VFD insulating oil purification series is mainly used to improve the properties of insulation oil. It can remove water, gas, particulate matters etc. from the insulating oil effectively and rapidly so as to boost performance of transformers, circuit breakers, mutual inductors, cable and capacitors which has insulation system. VFD oil filtration series is specialized in purifying branded oil, insulating oil of high voltage and super high voltage transformer. Additionally, it is suitable for treating low viscosity lubrication oil.
Description
Model VFD series utilizes coacervation technology, coalescing technology, separating technology and refined purification technology. Comparing to Model VF series, it adds ROOTS vacuum system, second stage of separating system to improve the effect of purification, to remove free, soluble water, carbon, free and dissolved gases and particulate matters from insulating oil effectively and rapidly.
Technical Specifications
ItemUnit
VFD-30,VFD-50,VFD-70 ,VFD-100,VFD-150,VFD-200VFD300
Flow Rate L/H
1800,3000, 4500, 6000, 9000,12000, 18000
Heating Power Kw
30 , 48, 72, 90 , 120 , 180 , 240
Total Power Kw
33 , 52, 77, 96 , 128 , 188 , 252
Inlet(Outlet)DiameterMm
DN25, DN25,DN32,DN32,DN40,DN50,DN65
Net Weight Kg
900, 1000, 1100, 1400, 1800, 2100, 2400
Size length Mm
1500, 1600, 1700, 1800, 2200, 2300,2400
width Mm
1100, 1300, 1400, 1500, 1700, 1800, 1900
height Mm
1950, 2000,2050, 2050, 2100, 2250, 2250
Vacuum Range MPa -0.092 --- -0.099
Max Vacuum Range Pa 50
Working Pressure MPa 0.2
Temperature Range 20--80
Water Content PPm 4
Gas Content % 0.1
Breakdown Voltage Kv 75
Power Supply V ~50Hz 380V or as needed
Working Noise dB 72 78
There are other types of this series depend on your need. If you interested them, please give me a message with your e-mail and other details.
We will deal with all your questions professionally.
|
|
| » Posted by: Sino-nsh oil purifier manufacture co.,ltd [China] |
|
|
|
|
|
[Sell]
Turbine Oil Filtration Oil Purifier Oil Treatment Oil Recycling |
|
|
NSH TF Turbine Oil Purifier(oil separator, oil machine, oil cleaner, oil refinery, Oil Regeneration, Oil Purification, Oil filter, Oil purify, Oil Recovery, Oil Processing, Oil Filtering, Oil Filtration, Oil Treatment, Oil Recycling, Oil Restoration, Oil disposal, Oil Reclamation, waste oil disposal, oil reclaiming, waste oil management, energy saving, oil reconditioned, oil reconstituted, oil restituting, oil recovering, oil recuperation, oil filtrating, used oil, industrial oil, oil remediation, oil remediation, oil reactivation, oil separation)
Application
TF series oil filtration equipment is particularly suitable for purifying turbine lubricating oil. It also applys to treat hydraulic, coolant oil and other lubrication in which contains large amount of water, vapor, impurities, sludge, dielectric and colloid.
It can eliminate them effectively and efficiently. TF series will result in the improvement of the properties of turbine oil, other lubrication and extend the maintenance period of turbine or other equipment which has lubrication system and keep them operated in good condition.
Description
TF turbine oil purifier series is developed by vacuum evaporation technology, coacervation technology, coalescing technology, separating engineering technology and refined purification technology. It can eliminate water, gas, impurities, colloid, dielectric etc. rapidly and effectively in high vacuum situation and make the waste oil renewed.
Turbine or other equipments which has lubrication system need be replaced frequently because of vapor, water and other impurities mixed with it. Otherwise, oil deterioration would result in breakdown of machinery or affect the normal running of machinery.
TF series can effectively extend the lifetime of oil and protect turbine and other machinery which has lubrication system from damage.
Technical specifications
Item Unit
TF-30 TF-50 TF-100 TF-150 TF-200 TF-300
Flow Rate L/H
1800 3000 6000 9000 12000 18000
Heating Power Kw
18 24 45 60 90 108
Total Power Kw
21 28 50 66 98 118
Inlet(Outlet)Diameter Mm
DN20 DN25 DN32 DN40 DN50 DN65
Net Weight Kg
450 580 700 900 1000 1200
Size length Mm
1350 1400 1500 1500 1600 1800
width Mm
950 950 1000 1200 1350 1400
height Mm
1500 1600 1650 1800 1800 1850
Vacuum Range MPa -0.08 --- -0.096
Working Pressure MPa 0.3
Water Ratio PPm 100
Impurity size 5
Clearness NAS1638 6
Temperature Range 20 80
Demulsifying Value min 15
Power Supply V ~50Hz 380V or as needed
Working Noise dB 70 75
There are other types of this series depend on your need. If you interested them, please give me a message with your e-mail and other details.
We will deal with all your questions professionally.
|
|
| » Posted by: Sino-nsh oil purifier manufacture co.,ltd [China] |
|
|
|
|
|
[Sell]
Industrial Lube Oil Processing Oil Disposal Oil Refining Machine |
|
|
LV Lubrication Oil Purifier (oil separator, oil machine, oil cleaner, oil refine, Oil Regeneration, Oil Purification, Oil filter, Oil purify, Oil Recovery, Oil Processing, Oil Filtering, Oil Filtration, Oil Treatment, Oil Recycling, Oil Restoration, Oil disposal, Oil Reclamation, waste oil disposal, oil reclaiming, waste oil management, energy saving, oil reconditioned, oil reconstituted, oil restituting, oil recovering, oil recuperation, oil filtrating, used oil, industrial oil, oil remediation, oil remediation, oil reactivation)
Application
LV series oil recycling system is suitable especially for purifying and restoring hydraulic oil, machine oil, coolant oil and other lubrication oil. The most breakdown of machinery which has lubrication oil system results from contaminated lubrication in which has water, gas, impurities etc. LV series can rapidly remove water, gas, particulate matters and impurities from lubrication oil and improve properties of lubricating oil so as to greatly extend lifetime of machinery which has lubrication system.
Features
Perfect capacity of removing impurities. The special filters of NSH are made of special materials which can eliminate various impurities, water and gas effectively and rapidly.
Automatic reverse washing system will extend the lifetime and improve the performance of the filters.
High performance security system including pressure protection device and automatic temperature controller makes purifier operated safely.
Online work
Easy handling and maintenance.
Lower maintenance and replacement expenses
Small size, light weight, low noise
Available to mobile or stationary options.
Various sizes and configurations (shield) available.
Technical Specifications
Item Unit
LV-30,LV-50,LV-100,LV-150,LV-200 LV-300
Flow Rate L/H
1800, 3000, 6000, 9000, 12000, 18000
Heating Power Kw
36, 60 , 72, 90 , 120, 135
Total Power Kw
39, 64 , 78,98, 128, 145
Inlet (Outlet) DiameterMm
DN20 DN25 DN32 DN40 DN50 DN65
Net Weight Kg
500, 550 , 700, 850, 1000, 1250
Size length Mm
1500, 1600, 1750, 1900, 1950, 2100
Width Mm
1050, 1150, 1150, 1600, 1600, 1600
height Mm
1650,1700, 1750, 1950, 1950, 2000
Vacuum Range MPa -0.08--- -0.096
Working Pressure MPa 0.3
Water Ratio PPm 100
Impurity size 5
Clearness NAS 5
Temperature Range 20-80
Power Supply V ~50Hz 380V or as needed
Working Noise dB 70 75
There are other types of this series depend on your need. If you interested them, please give me a message with your e-mail and other details.
We will deal with all your questions professionally.
|
|
| » Posted by: Sino-nsh oil purifier manufacture co.,ltd [China] |
|
|
|
|
|
[Sell]
(y-001) auto parts/auto molding part/auto molded part |
|
|
(y-001) auto parts/auto molding part/auto molded part
Supply various moulds for auto parts , also every plastic parts for automobile.Provide the moulds and injection molding.
1)Specialize in plastic injection moulds and injection molding for auto parts with rich experience.
2)We have produced almost every parts of automobile,such as airfilter,waterchamber,bumper,drawer,doorknob,steering wheel and so on.
3)Track the process, with 6 working days every week, and CNC, EDM 24 hours working everyday. So we can guarantee the lead time.
4)We have made auto parts for Chrysler, Ford, GM, Honda, Nissan, Toyota and so on .
Mould material: NAK80, 1.2738, P20, 2344, and so on.
Mouldbase: LKM, HASCO, and so on.
Mould hot runner: HASCO, YUDO, EWIKON
We accept the following file types of inquiry:
Pro/E Solidworks UG AutoCAD Adobe Acrobat
.dxf .pdf .x_t .stp .igs .prt
|
|
| » Posted by: Higrade(Qingdao) Moulds & Products Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
plastic mold |
|
|
| we offer vary kind of plastic mold,injection part,rubber mold, |
|
| » Posted by: China Promising Mold Plastic Co.Ltd [China] |
|
|
|
|
|
[Sell]
Stainless Steel Wire Netting |
|
|
Wetter Stainless Steel Wire Mesh Factory. offers first-class stainless steel wire netting against mosquito in stainless steel 304, 316 or 316L for customers option.
Standard mesh counts per inch of stainless steel insect screen: 14meshx14mesh/16meshx16mesh/18meshx18mesh/
18meshx14mesh/20meshx20mesh
Advantage of Stainless Steel Insect Screen Wire Netting:
Stainless Steel Insect Screen Wire Netting enjoys lighter weight, nice look, excellent property against rust and super corrosion resistance, hence offers longer work span compared with galvanized iron insect screen or PVC coated insect screen.
We supply stainless steel insect screen wire netting with wire gauge from SWG34 to SWG38 at a variety of roll sizes, mainly for export.
Specification Reference of Stainless Steel Insect Screen Wire Netting
|
|
| » Posted by: Wetter Stainless Steel Wire Mesh Factory [China] |
|
|
|
|
|
[Sell]
Stainless Steel Wire Mesh |
|
|
Wetter offers better woven wire mesh and services. Typical Weaving Patterns as Follows:
Plain Weave Wire Mesh:
The warp wire that establish the length of the wire mesh and the weft wire, parallel to the width, cross one another, alternating one on the top and one under, forming a 90° angle between each other.
Solid woven wire mesh may have a square or rectangular opening.
Wire mesh clothes are basic components in the production of filters, colanders for aliments, chemicals products, shielding, mosquito nets, etc.
Wire Materials:
Stainless Steel Wire: Aisi 304, 304L, 316, 316L, 310, 314, 410, 430.
Special Steel: Cromax, Incoloy, Alloy Ni-Cr, Inconel, Nichel, Monel, Titanium, Duplex.
Woven wire mesh is also available with carbon steel, low carbon steel, galvanized steel, brass, bronze, copper, aluminum alloy, etc.
Tabby Plain Weave Wire Mesh Product Features:
Stainless steel wire mesh plain woven offers high filtering efficiency, low pressure loss, constant mesh opening, good dimensional stability, high open surface area and good fireproof property.
Technical Note:
1, Standard roll width of stainless steel wire mesh: 1m or 48"
2, Standard roll length of stainless steel wire mesh: 30m or 100'
3, Material of stainless steel wire mesh: AISI 304 or 316
Stainless steel wire mesh plain woven sizes:
2mesh/3mesh/4mesh/5mesh/6mesh/8mesh/10mesh/12mesh/14mesh/16mesh/
18mesh/20mesh/26mesh/30mesh/40mesh/50mesh/60mesh/70mesh/80mesh/ 90mesh/100mesh/120mesh/150mesh/160mesh/180mesh/200mesh/250mesh/ 300mesh/325mesh/350mesh/400mesh/
Twilled Woven Stainless Steel Wire Mesh
In the Twilled Woven Wire Mesh, the wires of the weft and the warp intercross two above and two below , inverting the intersections of the warp wire at an established distance, obtaining a rigid, stable and robust type of wire mesh fabric.
Crossed twilled wire mesh are basic components in the production of filters, colanders for aliments, chemicals products, shielding, mosquito nets, etc.
|
|
| » Posted by: Wetter Stainless Steel Wire Mesh Factory [China] |
|
|
|
|
|
[Sell]
Expanded Metal Gratings |
|
|
Grating is the most economical industrial walking surface you can install in your plant.
Walking surface is anti-skid, providing safe foothold.
The open design allows effective sprinkler coverage for fire protection; prevents dirt, grease or snow accumulation; it enables a visual 'see-through' area inspection; lowers maintenance costs.
Expanded Solutions grating costs less than bar-type or sheet metal grating and is easier to install in new or replacement applications.
One of the major purpose for Expanded Metal is grating. They come in 2 types: Light and Heavy grating.
Materials : Expanded metal grating can be manufactured in Aluminium, Stainless steel, Mild steel, and other metals.
Patterns for Gratings : Diamond, square, round, triangle, scale hole.
Sizes: Thickness from 0.50mm to 8.00mm. Hole width from 2.500mm to 50mm. Hole length from 4.50mm to 100mm. Openness from 0.50mm to 8.00mm.
Features : Using expanded metal grating or expanded metal mesh is to ensure safety, strength and anti-skid surface of the most economical manner, especially on the runway, working platforms.
Because it is very easy to cut into the shape of irregular, rapid welding can quickly install or use accessories. Projection Mesh Expanded Metal Safety Grating features small tooth-like projections on the upper surface of the mesh. These projections provide an excellent non-slip surface where additional anti-skid surfacing is desired. Projection Mesh Expanded Metal Grating is available in carbon steel in 2 and 3 pounds per square foot and in aluminum a 1 pound per square foot.
Weight Identification : Expanded Metal Grating is identified by weight per square foot. Carbon Steel Expanded Metal Grating is available in 3, 3.14, 4, 4.27, 5, 6.25 and 7 pounds per square foot. Aluminum Expanded Metal Grating is available in 2 pounds per square foot and Stainless Steel Expanded Metal Grating is available in 3.3 and 4.5 pounds per square foot.
Uses : The normal applications are fences for walk ways, partitions, making of corner beads, gates and laths, tread plates, stair protection, etc.
|
|
| » Posted by: Streckgitter Expanded Metal Sheet Factory [China] |
|
|
|
|
|
[Sell]
Expanded Metal For Building |
|
|
In building, the uses of expanded metal products are becoming popular. A variety of steel structures made of expanded metal in the form of sheets or coils are used for wall construction. Using the latest technology made by cutting and expansion, the steel expanded meshes are more lightweight but strong bearing capacity. Conventional wall construction is a major net steel diamond-shaped hole, used in high-rise building, civilian room, plants and other large plastering works for a mortar substrate mount strong, cracking, earthquake and other characteristics of a modern building in the new metal building materials.
Material: Cold-rolled plate, galvanized sheet, stainless steel plates
Opening: Diamond-shaped steel mesh, hexagonal steel mesh, plate mesh
Features: Light, reinforcing performance, mesh uniform, to facilitate the construction, great strength against earthquake, preventing cracks.
We also supply expanded metal angle bead, rib lath and other sheet products processed from perforated metal or expanded metal. |
|
| » Posted by: Streckgitter Expanded Metal Sheet Factory [China] |
|
|
|
|
|
[Sell]
Industrial Expanded Metal Mesh |
|
|
Industrial expanded metal is made from steel plates or sheets, diamond shaped openings, uniform size and thickness. The most popular assortments for industrial meshes:
Carbon Steel Expanded Metal;
Stainless Steel Expanded Metal;
Aluminum Expanded Metal
Expanded Metal Meshes are produced from solid sheets or plates of carbon, galvanized and stainless steel, as well as aluminum and a variety of alloys of copper, nickel, silver, titanium and other metals. Because expanded metal is made from a solid sheet of metal, it can never unravel. The metal strands forming the open diamonds permit light, heat, air, liquids and sound to pass through yet present a virtually un-penetrable barrier to intruders. Expanded Metal is an extraordinary versatile material one with thousands of uses.
|
|
| » Posted by: Streckgitter Expanded Metal Sheet Factory [China] |
|
|
|
|
|
[Sell]
Decorative Expanded Metal Mesh |
|
|
Expanded metal sheet, after the process of expansion, if necessary, can become several times its original size.
In the process of expansion, the metal sheet material is given a full use with less or zero loss of material compared with metal mesh of other processing method.
To increase the rigidity and corrosion resistance, the expanded metal can be plastic coated.
Because of the structure, expanded metal sheets have great uses as well as the sectors of applications.
Easy for cutting and bending, expanded metal in fine and medium thickness, can be processed in small workshops or even on the spot of application.
Decorative Patterns: Specially designed expanded metal for use in architectural and decorative applications. These designs can be used to provide privacy and to control light and air while allowing visibility. Sun screens, room dividers, and building facades are only a few of the possible design possibilities. Decorative expanded metal is available in carbon steel, aluminum and other alloys in a wide range of patterns and gauges. Most of these patterns are produced on a special order basis only.
|
|
| » Posted by: Streckgitter Expanded Metal Sheet Factory [China] |
|
|
|
|
|
[Sell]
spare parts for shot blasting machine |
|
|
Good Quality Parts are heart of machine, which gives long life of equipment and minimum blasting cost. Our company could provide high chrome anti-abrasion spare parts are used in different types of shot blasting equipments including wheel vanes,impeller,impeller case,impeller vanes,impeller head,guard plate,lining plates and so on. All parts are made of high chrome alloy steel, heat treated to give long life. Blade, Impeller Control Cage are hardened. Barewheel which are hardened & balanced gives long life which is our speciality.Blades are balanced within 5 gms for long life and trouble free service.
Please let us have the detail information about spare parts for shot blasting machine that you required. We can assure you the steady quality, punctual delivery and technical services. Meanwhile ,our products have exported to some countries and we have got good reputation from domestic and abroad.
|
|
| » Posted by: Qingdao Disa Machinery Co,.Ltd. [China] |
|
|
|
|
|
[Sell]
shot blast machine for wire and bar |
|
|
DISA manufactures a kind of shot blasting machines for continuous inline descaling or batch type (coil) shot blasting machines for the iron and steel industry.
This type machine is suitable for treating steel wire,rod and bar of various diameters.The in line blast machines are designed for descaling wire rods, bars, or Billets at throughput speeds up to (60 meters/min.).
The abrasive is propelled by centrifugal turbines. The number of wheels of each machine depends on the size of the rod to be blasted and/or rod speed.
|
|
| » Posted by: Qingdao Disa Machinery Co,.Ltd. [China] |
|
|
|
|
|
[Sell]
Shot Blasting Machine for Gas Cylinder |
|
|
We offer special purpose shot blasting machine for LPG cylinders and cartridge bodies .The cylinders are fed from inputside, on diabola conveyor which give with its rotation a double movement of roto-translation to cylinder (cylinder while moving forward also rotates). A powerful and the latest low maintenance blast wheel is mounted on the top of work cabinet which continuously fires stream of abrasive on incoming cylinders The conveyor speed is adjustable to meet output requirement. The machine also entails efficient abrasive recovery, separation and control system which continuously clean the abrasive of dust, debris, oversize and undersize particles. An abrasive control valve is provided which meters the quantity of abrasive going into blast wheel unit.With very good finishing degree given by the special position and power of the wheel and by innovative handling system.It can cleans 6 cylinder/minute.The various capacities of machine to suit different sizes of LPG Cylinders can be manufactured.
|
|
| » Posted by: Qingdao Disa Machinery Co,.Ltd. [China] |
|
|
|
|
|
[Sell]
Steel Pretreatment shot blasting machine |
|
|
QXY series Steel Pretrement shot blast Machine mainly consist of lading and unloading mechanism, input and output roller converoy, preheating cabinet, blasting machine, paint spray cabinet, drying cabinet, automatic check system, dust collector and eletric control system. The products can be either operated in line or independently used according to users' demands. Whole line f the equipment is controlled by PLC (programmable logic control) system.
A position depositor and a photoeletric inspection device are used to antomatically measure the thickness and width of work-pieces being pretreated and adjust the width of hot-spot of thrown abrasives and the height of brush apparatus. The work speed of four segments of brush apparatus. The Work speed of four segments of roller conveyor in whole line is controlled by frequency conversion. The speed of either one segment or the whole line rollers can also be finely adjusted, thus, under the loading and unloading state, the high-accuracy of synchronous conveying can be achieved so that to ensure the shot blasting, paint spraying and drying result. |
|
| » Posted by: Qingdao Disa Machinery Co,.Ltd. [China] |
|
|
|
|
|
[Sell]
Double_hook and Continuous Pass_through Shot Blast Machine |
|
|
This machine is mainly used for shot blast and rust removal before paint coating of bulldozer, road machine, loading machine and components to remove welding slag, roll scale and other feculence and obtain clean metal surface with certain roughness. When using this machine to do shot blast, there are benefits as follows: improve exterior decoration and inherent quality of the product to bring new commercial opportunities to manufacturers; the workpiece after shot blast could obtain even clean metal surface with certain roughness to promote erosion resistance of mechanical products and metal materials; get rid of welding stress of components and enhance their fatigue strength to obtain permanent use life; strengthen adhesive strength of paint film and improve decoration quality and antisepsis effect of workpiece; the whole machine has realized PLC automatic cleaning model, promoted the efficiency greatly and reduced labor strength of cleaning work.
|
|
| » Posted by: Qingdao Disa Machinery Co,.Ltd. [China] |
|
|
|
|
|
[Sell]
Hanger Pass-through Shot Blasting Machine |
|
|
This series is pendent-chain & Pile-type Shot Blast Machines The machines are designed to increase the performance of the hook type machines by keeping the turbines continuously running.
The materials are hanged on several hooks connected to a ring type overhead conveyor, which can be monorail, double rail or with hoists.
The hook inside the blasting room, once in position, starts to rotate on its axis and move back and forward in front of the turbines (mounted on one side of the machine). These combined movements ensure the complete shot-blasting of the parts external surface.
The customer can choose the size and loading capacity of the machine according to the parts to be shot-blasted. especially to some industries such as motorcar, tractor, diesel engine, electric motor and valve. It could make workpiece after cleaned show clean and bright metal surface and improve paint quality of the workpiece.
|
|
| » Posted by: Qingdao Disa Machinery Co,.Ltd. [China] |
|
|
|
|
|
[Sell]
Turntable Shot Blast Machine |
|
|
Shot blast machine for the treatment of workpieces huang on a turning hook in two compartments,each altermating in the blast zone area on a pre-set timer.with facility for monitoring the position of the hook automatically.
|
|
| » Posted by: Qingdao Disa Machinery Co,.Ltd. [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 next»
|
|
|
