|
|
|
|
|
|
|
[Sell]
Hot Dipped Zinc Plated Wire |
 |
|
General Introduction: Hot-dipped zinc plated wire is also known as hot dipped galvanized wire or thermal galvanized wire. It is made by mean of wire drawing followed by heat treatment and zinc plating.
Wire Materials: Iron wire, carbon steel wire.
Advantages: Excellent flexibility and softness. The zinc coating can be 100g/m2, 200g/m2 and 300g/m2. Single coil package for hot-dip galvanized iron wire can be different from 10 kg to 1000 kg.
Application: As tying wire in agriculture for vines and orchards, as weaving wire in the fencing and netting industry, as material for packaging of products and other daily uses.
|
|
» Posted by: Anping County First Galvanized Iron Wire Factory [China]  |
|
|
|
|
|
[Sell]
Button Bits for Mineral Exploration |
|
|
Made of alloy and suitable carbide insert,with different buttons on top,and different flushes or water holes on top and sides.Any common or special sizes you need we could produce.
|
|
| » Posted by: Sanhe Qiangli Pneumatic Machinery Factory [China] |
|
|
|
|
|
[Sell]
Gas-powered Rock Drill YN27C |
|
|
1.Weight of the main machine: 27kg
2.Overall dimension: 746×315× 229mm
3.Type of engine:single cylinder,air cooled two strokes
4.Cylinder Diameter×Stroke of piston:5 8 × 70mm
5. Rotating speed of engine: ≥2450r/min
6.Displacement of englne plston: 185 cm3
7.Type of carburetor: hand needle valve,no floating type
8.Ignition system: Controllable silicon contactless system
9. Drilling speed:(mean value of five holes) ≥ 250mm /min
10. Max. drilling depth: ≥ 6m 11.Fuel consumption: ≤0.12L /M 12.Tank capacity:≥ 1.14L 13.Mixing ratio of gasoline and lubrication oil (in volumes):9:1
14. End of drill rod dimensions: hexagonal2 2 × 108mm
15. Rotating speed of drill rod:≥200r/min
16. Clearance of Spark plug :0.5 -0.7mm
|
|
| » Posted by: Sanhe Qiangli Pneumatic Machinery Factory [China] |
|
|
|
|
|
[Sell]
Wire Mesh Fence |
|
|
This page provides information on metal fences, woven or welded.
Materials for wire mesh fences: Galvanized iron wire or plastic coated iron wire.
Process: Welding.
Fence length: 2m, 2.5m as standard Application: Wire mesh fences are used in protection and isolation for road, railway, airport, residence district, seaport, garden, feeding and husbandry.
|
|
| » Posted by: Tejido Stainless Steel Wire Mesh Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
hydraulic gear puller,hydraulic tools |
|
|
Item: Integral-unit hydraulic gear puller
Item no.: CK Series
Description:
Using new type hydraulic gear puller is convenient for operating;
Workers can exchange two jaws and three jaws freely in the scene working;
The puller can be touched working center quickly after rotary according to the distance between puller and piston center;
It can choose pump freely;
The jaws with three can be adjusted from high to low point. |
|
| » Posted by: zhejiang Enershine Tools company [China] |
|
|
|
|
|
[Sell]
Hollow plunger cylinder,hydraulic tools,power tools |
|
|
Item: Hollow plunger cylinder
Item no.: RCH Series
Description:
Hollow hunger design allows for both pill and push forces;
Single-acting spring return;
Baked enamel finish for increased corrosion resistance;
Collar threads for easy installation. |
|
| » Posted by: zhejiang Enershine Tools company [China] |
|
|
|
|
|
[Sell]
puncher hole machine,hydraulic tools |
|
|
Item: Hydraulic puncher hole machine
Item no.: CH-70
Description:
CH-60、CH-70 hydraulic puncher hole machine is specialized for the hole digging of corner steel、flat steel、brass plate and other metal material, especially for electric power building and other industry filed operation;
SYD-35 metal digger is an advanced hand hydraulic tool which can dig the holes in the stainless steel sheet with the thickness less 1.5mm the press equipment can not do like this, easy operation, force-saving, quick; Smooth finished surface, not limited by place and location.
Model: CH-70
Thickness (mm): 12
Output (T): 35
Depth of throat (mm): 110
Weight (kg): 28
Mould (mm): 3/8＂(Φ10.5), 1/2＂(Φ13.8), 5/8＂(Φ17), 3/4＂(Φ20.5)
Remark: Can match CP-700 or ZCB-6-5 |
|
| » Posted by: zhejiang Enershine Tools company [China] |
|
|
|
|
|
[Sell]
Numbering boxes |
|
|
Types:
Rotary Numbering boxes
Plunger Numbering boxes
Others Numbering boxes
Digits: 7,8,9
Feature:1.horizontal/vertical
2.Progressive/ Regressive
3.3/16"Gothic /Roman/Etc.
4.Notch of Adapter: standard (22mm) wild (27mm)
5.Arm with spring or not
Circumference：153mm(18.9"),171mm(21.1"),180mm(22.3"),210mm(26.0"),etc
Packing : 1PCS / box
|
|
| » Posted by: Jingyuan Industry Group [China] |
|
|
|
|
|
[Sell]
printing machine spare parts |
|
|
Printing machine Spare Parts for Heidelberg series, ManRoland series , KMORI series, Hmada series, Ryobi series, Mitsubishi series, KBA series, Muller series.
1. Nozzle
2. Heidelberg Spare Parts
Printing Machine:102V,102F,MO,SOKD,SOKDZ,CTOD and other series component. All fittings for single color and bicolor offset machines component ,high-speed printing plate clips, adhesive tape clips, chains, gears, eccentric copper sets, original FAG and INA plane bearings, gear-opener bearings, localization bearings, pull bearings, super blue nets of teeth pillow, ink brushes, sucking films, all kinds of water based varnishes, paper delivery belts, powder based films 20C-45C, etc.
3. ManRoland Spare Parts
Printing Machine: RUK3B,RVP2C,RZFOB,PVU5 and other series components. all kinds of wear parts, all kinds of special wear bearings, printing gears, gnawing gears, helical gears, wind pumps, carbon steel plates, carbon brushes for electric machine, carbon brush racks, queue chains, Marco cinque machines, Marco hexad machines, Marco paper machines, printing machine copper cups, adhesive tape clips, delivery bits, bite blocks, bite pillows, paper delivery bite blocks, sucking films, all standards of ink brushes , etc.
4. Others Spare Parts
All kind of KMORI series , Hmada series, Ryobi series, Mitsubishi series, KBA series, Muller series printing machine Spare Parts.
|
|
| » Posted by: Jingyuan Industry Group [China] |
|
|
|
|
|
[Sell]
Large heavy CNC machined parts |
|
|
10 Large heavy CNC machined parts
Hangzhou Fulai Mechanical Parts Co., Ltd.
http://www.mechanical-oem.com/Large-Heavy-Parts-manufacturers.html
As our advantage, we have full experience in project operation for large heavy parts and steel structures, which can be cut by CNC flame cut or laser cut, later it will be assembled and welded by TIG/MAG machine. Of cause the large heavy structures also need to be heat treated in order to release the inside stress before machining, and then it may be machined by gantry planing machine, large CNC milling machines, heavy lathes and large CNC grinding machine etc.
|
|
| » Posted by: Hangzhou Fulai Mechanical parts Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Aluminum rollers (idlers) |
|
|
09 Aluminum rollers (idlers)
Hangzhou Fulai Mechanical Parts Co., Ltd.
http://www.mechanical-oem.com
HS Code：84439920 Aluminum rollers
We’re specialized in producing aluminum alloy rollers in high quality. Aluminum rollers can be widely applied to all kinds of printing machines that work with high rolling speed, including printing packaging, plastics, electronics, etc. Aluminum alloy materials are 6063T5 and 6061T5 etc and it needs to be dynamic balanced and later the aluminum roller will be anodized in natural or black color.
|
|
| » Posted by: Hangzhou Fulai Mechanical parts Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Lift stands |
|
|
08 Lift stands
Hangzhou Fulai Mechanical Parts Co., Ltd.
http://www.mechanical-oem.com
HS Code：7308900000 Elevator parts
This is a sheet metal stands for America lift/elevator. We provide custom sheet metal fabrication parts equipped various PEM nuts, studs, screws and inserts with wet paint, powder coating or zinc plating treated. The sheet metal parts can be made by laser cut, CNC punching, die-stamping, spinning and roll forming etc.
stands
|
|
| » Posted by: Hangzhou Fulai Mechanical parts Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Investment casting |
|
|
07 Investment casting
Hangzhou Fulai Mechanical Parts Co., Ltd.
http://www.mechanical-oem.com
HS Code：7325101000 Precision steel casting
This is an investment steel casting for an Italy customer. We provide various custom casting parts within precision CNC machining completely, and meanwhile we also have lots of casting sourcing such as die-casting, investment steel casting, precision stainless steel casting and aluminum injection etc.
|
|
| » Posted by: Hangzhou Fulai Mechanical parts Co., Ltd. [China] |
|
|
|
|
|
[Sell]
CNC precision machined parts |
|
|
06 CNC precision machined parts
Hangzhou Fulai Mechanical Parts Co., Ltd.
http://www.mechanical-oem.com
HS Code：8477900000 CNC machined parts
This is a GGG 60 casting, which is knife base of an Italy granulator machine. The parts are machined on a 4-axis CNC machine. We provide various custom precision machined parts and meanwhile we also have lots of casting sourcing such as die-casting, investment steel casting, precision stainless steel casting and aluminum injection casting etc. We can also provide material certification for each batch of casting products if necessary.
|
|
| » Posted by: Hangzhou Fulai Mechanical parts Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Turned parts |
|
|
05 Turned parts
Hangzhou Fulai Mechanical Parts Co., Ltd.
http://www.mechanical-oem.com
HS Code：84831010 Precision machined parts
This is a kind of precision CNC machined part. We would like to provide custom metal parts, which needs to be produced by cut, turning, milling or any other CNC machining. All the material such as 304, 316L stainless steel, mild steel, aluminum and copper/brass is available to produce custom parts.
|
|
| » Posted by: Hangzhou Fulai Mechanical parts Co., Ltd. [China] |
|
|
|
|
|
[Sell]
ALUMINUM CASES |
|
|
04 ALUMINUM CASES
Hangzhou Fulai Mechanical Parts Co., Ltd.
http://www.mechanical-oem.com
HS Code: 7616991090 Aluminum cases
This is an aluminum case (enclosure, box and cabinet so called as well) for light industry. The aluminum cases is made by CNC punching, bending, Tig/Mag welding and surface treatment is powder coating. The sheet metal fabrication also includes the process of die stamping, spinning, injection casting and so on – it depends on the requirements of the products and design.
|
|
| » Posted by: Hangzhou Fulai Mechanical parts Co., Ltd. [China] |
|
|
|
|
|
[Sell]
DRIVE FRAME |
|
|
03 DRIVE FRAME
Hangzhou Fulai Mechanical Parts Co., Ltd.
http://www.mechanical-oem.com
HS Code: 84831010 Marine parts
This is a drive frame for England houseboat company. We can provide not only custom metal parts but also TIG/MIG welding assembly if you need. All the material such as stainless steel 304L, 316L and DSS (Duplex Stainless Steel), steel (S235 and S355J2H etc.), aluminum (6061T651, 6063T5, 5052H32 and 3003 etc.) and copper/brass is available to produce custom parts.
The drive frame needs to be coated with zinc spray inside and powder coating outside.
|
|
| » Posted by: Hangzhou Fulai Mechanical parts Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Steel idlers |
|
|
02 Steel idlers
Hangzhou Fulai Mechanical Parts Co., Ltd.
http://www.mechanical-oem.com/Idlers.html
HS Code：84314990 parts of mine machinery
Steel idlers (include bracket assembly) are used widely in the conveyor system and mine industry etc. All kind of surface coating such as paint and powder coating etc. is available.
The usual diameter of idler is between D76 – D159mm.
|
|
| » Posted by: Hangzhou Fulai Mechanical parts Co., Ltd. [China] |
|
|
|
|
|
[Sell]
the production line of steel rolling |
|
|
Anshan HongMing Metallurgical Machinery Co., Ltd.is a large comprehensive enterprise which combines scientific research, metallurgical
equipments, mechanical processing, manufacturing rolling, trading and so on. We process top-ranking scientific researchers as well as experienced team of production,management, and marketing. On the basis of mutual benefit,
this is to introduce our detailed profile to our company's capability of undertaking for international friends and companies'reference and choose.
I.Ability of Undertaking processing
1.Ability of machine processing
The way of processing: the max processing equipment and prcessing ability.
2.Heating treatment:
13000x6500x2580mm annealing furnace
(max furnace is 120t, the high temperature is 11500C)ect..
II.steel rolling machine
D250mm to D650mm
III.the way of the cooperation
Our company not only can supply the equipment of the steel rolling ,but also can design it ,equip the equipment, and produce under the order . we have only one mission that is make the consumer be satisfied.
Please do not feel any hesitate to contact us for any doubt.
Wish we will have a pleasant and successful cooperation.
Contact person:Ms.Ada Li
Phone:86-412-8510377 86-412-8554528
Fax:86-412-8562503 86-412-8562501
MSN:ltt612@hotmail.com
e-mail:ltt612@hotmail.com asyingyi02@163.com |
|
| » Posted by: Anshan HongMing Metallurgical Machinery Co. Ltd. [China] |
|
|
|
|
|
[Sell]
Supply of mining equipment |
|
|
We, Anshan Ying Yat Trade CO., LTD & Anshan HongMing Metallurgical Machinery CO., LTD would like to introduce ourselves as a group corporation who has his own right to import and export. We can integrate the designing and production together as well. Our company has the professional technology development personnel. We can design and manufacture some large-scale mining equipments, such as all the complete set of equipments from mining to ironmaking and steelmaking. We are also engaged in all the smelting equipments including various forklift, loading shovel, ditch-and-trench excavator, large dumping wagon, crushing machine, magnetic separator, ball mill, sintering machine and so on used for mining. Our company can design and manufacture the ironmaking furnace, steelmaking furnace (from 50 cube to 200 cube blast furnace), medium frequency furnace, electric arc furnace, continuous casting machine etc. Moreover, various frication press,punching machine, bending machine, air hammer, tube drawing bench, wire drawing bench, high-frequency pipe welding machine, different pipe welding machine, plate bending machine, flattening machine, slitting machine and so on equipments are also within the scope of our supply.
And our company has very professional engineers and technical staffs. We can provide our users' with a series of service, such as design, manufacturing, installation, debugging and trial production.
In addition, our company can also sell large vehicles used for mine.
Finally, our company is in a position to sell brick moulding machine, stirring vehicle, stirring machine, stirring station, bulk cement vehicle, pushdozer and cement pouring pump cars.
Welcome friends anywhere to visit our company in China.
Contact person:Ms.Ada Li
Phone:86-412-8510377 86-412-8554528
Fax:86-412-8562503 86-412-8562501
MSN:ltt612@hotmail.com
e-mail:ltt612@hotmail.com asyingyi02@163.com |
|
| » Posted by: Anshan HongMing Metallurgical Machinery Co. Ltd. [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 next»
|
|
|
