|
[Sell] PTFE flexible hose connector |
|
|
Convoluted PTFE Hose Connector Application: It can be used to connect graphite, ceramics or glass pipeline; and used as the feeding and batch pipe of tank car,stock tank or reactor; and also used as the tubular reactor or heat exchanger in special occasions. Suitable for most known chemicals, acids, oils, corrosives,alkalis, gases, steam, pharmaceutical and foodstuffs industries. Features: Convoluted hose that provides excellent flexibility with a high pressure rating. The convoluted PTFE liner is fully corrosion resistant, as well as ultra flexible to resist cracking and stress. -Convoluted PTFE Hose connector -ANSI Flange PTFE lined hose -Convoluted PTFE hose with SS braiding -Braid:high tensile stainless steel AISI 304 braid -Liner:Thick white PTFE, flared over surface -Sizes:1/2" through 12" ID -End fittings:lap joint flange of carbon steel or stainless steel |
|
» Electronics & Electricals/Cables & Wire |
|
|
|
[Sell] Shut-off PFA Ball Valve 2pieces |
|
|
Shut-off standard port PFA Ball Valve 2pieces Ball Valves lined with PFA or FEP provide trouble free service in acid environments, they are commonly used in pulp and paper operations, Chlorine water, Chlorine dioxide, Sodium hypochlorite and sulphuric services. Flange ASME B16.5 Class 1 |
|
» Machinery & Tools/Machinery |
|
|
|
[Sell] ss316 duct with teflon coating inside |
|
|
Teflon Lined or Coated pipe fittings Teflon Lining Equipment : storage tank, Reaction vessels, Centrifuges, Receiver /Dosing Tanks, Distillation Columns etc. Lining: PTFE,PFA,ETFE(F40),FEP(F46),PE,PP,PO ; Material : Carbon steel or Stainless Steel; Contact:+86-15000442852 SKYPE:ivy_fysalesat163.com |
|
» Textile & Wear/Equipment |
|
|
|
[Sell] Anti-static PTFE bellows expansion joints |
|
|
PTFE expansion joint bellows,anti-static PTFE lining for option.Vacuum pressure and high temperature resistance,more Fabric expansion joint,metal expansion joint,rubber expansion joint are available. |
|
» Electronics & Electricals/Cables & Wire |
|
|
|
[Sell] Glass lined film Evaporators for distillation |
|
|
Carbon Steel Glass Lined Film Evaporator (distillation high corrosive fluid) Application: Better for strong corrosive liquid distillation, the process of prohibit metallic ion suction, high viscosity medium, thermal sensitivity medium and high boiling point medium. Size:0.25~10m2 Design pressure: FV 0.4MPa(Vessel); 0.6MPa(Jacket); Pressure test: 0.59MPa(Vessel); 0.88MPa(Jacket) Design temperature: 200 degree; (Vessel/Jacket) For more,pls visit:www.teflonlined.com contact:salesatnjzhengyuan.com |
|
» Textile & Wear/Equipment |
|
|
|
[Sell] Glass lined Scraper Film Evaporators |
|
|
Glass Lined Scraper Film Evaporator -distillation high corrosive fluid. It is the pioneer product in China solving the problem of refining distillation of high boiler with strong corrosion and heat instable chemicals, which can greatly promote the recovery efficiency and quality of high boiler and heat instable chemicals. Heat sensitive materials:materials have effected on quality and gains. Material which is not refine from the reactor and without high purity . Material with more evaporation and high concentration . OPTIONAL SIZE: 0.5 m2 ~ 10m2. |
|
» Textile & Wear/Equipment |
|
|
|
[Sell] Chemical Batch Reactor with agitator |
|
|
Our Group offer range of reactors and accessories manufactured from glass-lined carbon steel, glass-lined stainless steel.Volume from 50L to 25000L.Jacketed open type or close type. With all necessary accessories like agitator,mechanical seal,Thermowell with baffle,Flush valve,Manhole,Dip pipe,Glass lined pipe fittings. |
|
» Textile & Wear/Equipment |
|
|
|
[Sell] SS316 PTFE lined reducing tee |
|
|
PTFE pipe fittings/PTFE lined Straight Tee/Seamless steel pipe tee/Equal tee/SS316 PTFE lined pipe General: l PTFE lined Equal tee or Reducing Tee. l Nominal Diameter(mm/in):DN15~DN300(1/2~12inch); l Operation temperature:-20C~180C; l Operation pressure:-0.09MPa~1.6MPa (-0.9bar~16bar); l Pipe: Seamless steel; I Liner: PTFE l Flange: ASME B16.5 Class 150/300; l Flange options: HG,GB,JB,JIS,BS,DIN, Loose flange available ; |
|
» Textile & Wear/Equipment |
|
|
|
[Sell] Teflon PTFE convoluted hose |
|
|
Convoluted PTFE Hose Connector Application: It can be used to connect graphite, ceramicsor glass pipeline; and used as the feeding and batch pipe of tank car, stock tank or reactor; and also used as the tubular reactor or heat exchanger in special occasions. Suitable for most known chemicals, acids, oils, corrosives, alkalis, gases, steam, pharmaceutical and foodstuffs industries. Features: Convoluted hose that provides excellent flexibility with a high pressure rating. The convoluted PTFE liner is fully corrosion resistant, as well as ultra flexible to resist cracking and stress. -Convoluted PTFE Hose connector -ANSI Flange PTFE lined hose -Convoluted PTFE hose with SS braiding -Braid:high tensile stainless steel AISI 304 braid -Liner:Thick white PTFE, flared over surface -Sizes:1/2" through 12" ID -End fittings :lap joint flange of carbon steel or stainless steel |
|
» Electronics & Electricals/Cables & Wire |
|
|
|
[Sell] Glass lined Reactor kettle |
|
|
Our Group offer range of reactors and accessories manufactured from glass-lined carbon steel, glass-lined stainless steel.Volume from 50L to 25000L.Jacketed open type or close type. With all necessary accessories like agitator,mechanical seal,Thermowell with baffle,Flush valve,Manhole,Dip pipe,Glass lined pipe fittings. |
|
» Textile & Wear/Equipment |
|
|
|
[Sell] Enamel carbon steel glass lined reactor |
|
|
Our Group offer range of reactors and accessories manufactured from glass-lined carbon steel, glass-lined stainless steel.Volume from 50L to 25000L.Jacketed open type or close type. With all necessary accessories like agitator,mechanical seal,Thermowell with baffle,Flush valve,Manhole,Dip pipe,Glass lined pipe fittings. |
|
» Textile & Wear/Equipment |
|
|
|
[Sell] Close type Glass lined Steel Reaction kettles |
|
|
Our Group offer range of reactors and accessories manufactured from glass-lined carbon steel, glass-lined stainless steel.Volume from 50L to 25000L.Jacketed open type or close type. With all necessary accessories like agitator,mechanical seal,Thermowell with baffle,Flush valve,Manhole,Dip pipe,Glass lined pipe fittings. |
|
» Textile & Wear/Equipment |
|
|
|
[Sell] Carbon steel Glass lined film Evaporators |
|
|
Carbon Steel Glass Lined Film Evaporator (distillation high corrosive fluid) Application: Better for strong corrosive liquid distillation, the process of prohibit metallic ion suction, high viscosity medium, thermal sensitivity medium and high boiling point medium. Size:0.25~10m2 Design pressure: FV 0.4MPa(Vessel); 0.6MPa(Jacket); Pressure test: 0.59MPa(Vessel); 0.88MPa(Jacket) Design temperature: 200 degree; (Vessel/Jacket) For more,pls visit:www.teflonlined.com contact:salesatnjzhengyuan.com |
|
» Textile & Wear/Equipment |
|
|
|
[Sell] 5000L Glass steel agitator Reactor(Open Type) |
|
|
Glass-Lined reactor:Carbon steel,Imported Japan enamel,Impeller agitator,Double mechanical seal,volume from 50L to 30000L,glass lining 0.8mm to 2mm,Japan 200BW glass lining have better acid resistance rate, and more widely condition use than DeDietrich in test.Talk with me:sales@njzhengyuan.com |
|
» Textile & Wear/Equipment |
|
|
|
[Sell] ETFE Coating carbon steel Columns |
|
|
Teflon lined equipments on hot supply: Storage tank,Reaction vessels,Centrifuges,Receiver/Dosing tanks,Distillation Columns,Apipe and fittings etc. Lining:PTFE,PFA,FEP,ETFE,PO,PP,PE; Properties of Teflon Coating / Lining equipment: ->Non-stick ->Low coefficient of friction ->Heat resistance and cryogenic stability ->Chemical resistance ->Non-wetting ->Unique electrical properties ->Free from Maintenance easy to clean ->Safety while handling HAZARDOUS material. ->Higher Performance and lower cost than other exotic material like Hastelloy, titanium etc. |
|
» Textile & Wear/Equipment |
|
|
|
[Sell] Worm Gear Ball Valve manufacture |
|
|
Worm Gear PFA Ball Valve provide trouble free service in acid environments, they are commonly used in pulp and paper operations, Chlorine water, Chlorine dioxide, Sodium hypochlorite and sulphuric services. General : ->Nominal Diameter(mm/in): DN25-DN100(1inch~4inch) ->Operation Pressure: -0.1MPa~1.6MPa; ->Working Temperature: -10C~180C; ->Lining: temperature 120C, choose FEP for Body and Bonnet; temperature 120C~180C, choose PFA for Body and Bonnet; ->Shell and Nodular cast ion: QT400-15, compliy with standard of GB/T12227; ->Installation and connection dimension:The structure length complies w ith the length standard through negotiable selection in appendix A.5.3 0f HG/T3704. ->The flange connection dimension complies with ISO7005-2 and PN16 standards. Besides, ANSI and BS standards are available by requirements. Dimension: DN 20 25 40 50 65 80 100 L 140 150 180 200 220 250 280 H 130 130 155 155 165 180 195 HL 165 165 240 240 280 315 315 Selection form of materials and accessories: No. Item Material Optional 1 Body Ductile Iron+ lining 2 Bonnet Ductile Iron+ lining 3 Ball WCB+ lining 4 Valve seat PTFE 5 Valve Bellows PTFE 6 Handle SS304 7 Stem SS304 Cast steel 8 Valve gland SS304 |
|
» Machinery & Tools/Other |
|
|
|
[Sell] Manual Lined Ball Valve for pulp and paper factory |
|
|
Ball Valves lined with PFA or FEP provide trouble free service in acid environments, they are commonly used in pulp and paper operations, Chlorine water, Chlorine dioxide, Sodium hypochlorite and sulphuric services. General : ->Nominal Diameter(mm/in): DN25-DN100(1inch~4inch) ->Operation Pressure: -0.1MPa~1.6MPa; ->Working Temperature: -10C~180C; ->Lining: temperature 120C, choose FEP for Body and Bonnet; temperature 120C~180C, choose PFA for Body and Bonnet; ->Shell and Nodular cast ion: QT400-15, compliy with standard of GB/T12227; ->Installation and connection dimension:The structure length complies w ith the length standard through negotiable selection in appendix A.5.3 0f HG/T3704. ->The flange connection dimension complies with ISO7005-2 and PN16 standards. Besides, ANSI and BS standards are available by requirements. Dimension: DN 20 25 40 50 65 80 100 L 140 150 180 200 220 250 280 H 130 130 155 155 165 180 195 HL 165 165 240 240 280 315 315 Selection form of materials and accessories: No. Item Material Optional 1 Body Ductile Iron+ lining 2 Bonnet Ductile Iron+ lining 3 Ball WCB+ lining 4 Valve seat PTFE 5 Valve Bellows PTFE 6 Handle SS304 7 Stem SS304 Cast steel 8 Valve gland SS304 |
|
» Machinery & Tools/Other |
|
|
|
[Sell] PTFE lined Expansion Joints |
|
|
PTFE Bellows/Expansion Joint Typical applications would be for PTFE Lined carbon steel piping. General: -Nominal Diameter (mm/in.): DN 15~DN1600 (NPS1/2~NPS64) -Pressure: 0.1MPa; -Fatigue frequency:5000 time; -Operating temperature:200C -Virginal PTFE liner; -Reinforcing Rings: Stainless ring; -Standard face to face dimensions with threaded ANSI 125/150 lb. drilling; Product description: Expansion joints are designed to 1) absorb greater pipe movements and stress; 2) isolate mechanical vibration; reduce system noise; 3) protect against surge forces. 4) These connectors are suitable for connection to metallic piping or plastic lined metallic piping. 5) simple space-saving design and speedy installation. Chemical resistance: due to the universal proof material PTFE, regarding the areas of applications therer are practically no limitations |
|
» Electronics & Electricals/Cables & Wire |
|
|
|
[Sell] Metallic bellows with PTFE liner |
|
|
Metallic bellows with PTFE liner/PTFE Bellows/Expansion Joint General: -Nominal Diameter (mm/in.): DN 15~DN1600 (NPS1/2~NPS64) -Pressure range: 0.06~0.4MPa; -Fatigue frequency:10000 times -Operating temperature:200C ; -Virginal PTFE liner; -Reinforcing Rings: Stainless steel sheild ; -Standard face to face dimensions with threaded ANSI 125/150 lb. drilling; Product description: Expansion joints are designed to 1) absorb greater pipe movements and stress; 2) isolate mechanical vibration; reduce system noise; 3) protect against surge forces. 4) These connectors are suitable for connection to metallic piping or plastic lined metallic piping. 5) simple space-saving design and speedy installation. Chemical resistance: due to the universal proof material PTFE, regarding the areas of applications therer are practically no limitations |
|
» Electronics & Electricals/Cables & Wire |
|
|
|
[Sell] Flexible expansion joints for chemical resistance |
|
|
Flexible expansion joints for chemical resistance/Expansion Joint Product description: Expansion joints are designed to 1) absorb greater pipe movements and stress; 2) isolate mechanical vibration; reduce system noise; 3) protect against surge forces. 4) These connectors are suitable for connection to metallic piping or plastic lined metallic piping. 5) simple space-saving design and speedy installation. Chemical resistance: due to the universal proof material PTFE, regarding the areas of applications therer are practically no limitations General: -Nominal Diameter (mm/in.): DN 15~DN1600 (NPS1/2~NPS64) -Pressure range: 0.06~0.4MPa; -Fatigue frequency:10000 times -Operating temperature:200C ; -Virginal PTFE liner; -Reinforcing Rings: Stainless steel sheild ; -Standard face to face dimensions with threaded ANSI 125/150 lb. drilling; |
|
» Electronics & Electricals/Cables & Wire |
|
|
|
|
|
Pages: 1
|
|
|