|
|
|
Company Name: |
Shenzhen Hong Ye Jie Technology Co., Ltd. |
| Contact Person: |
Eileen Chen |
| City: |
Shenzhen |
| Country: |
China
 |
| Local Time: |
|
| E-mail: |
Premium
Membership Required (Join Free Today) |
|
| Introduction: |
Shenzhen Hong Ye Jie Technology Co., Ltd. was established in 1998, is a Science and technology corporation which is engaged in production, R & D, and sales of silicone rubber. It sets up Hong Kong Hongye Ltd., Shenzhen Hongye silicone rubber Factory and other affiliated enterprises in 2005.
Our products including 36 series in hundreds of kinds of silicone products like silicone rubber, RTV-2 molding silicone rubber, silicone rubber for manual model design, shoe sole mold silicone rubber, silicon oil, pad printing silicone rubber, encapsulant and potting compound, silicone rubber for LED display, electronic thermolysis ointment, thermal conductivity silicone, special silicone rubber for CPU, silicone tube, silicone membrane, silicone sealant, liquid silicone rubber, addition cure RTV silicone rubber, HTV silicone rubber, solid silicone rubber, gross rubber, silicone rubber sheet, hot stamping silicone plates, hot stamping silicone roller,etc. These are currently been exported to Southeast Asia, Europe, the America and other 50 countries and regions.
To reach the internationally leading quality standard with competitive price is our permanent pursuit. We aim at supply high quality products to meet customers satisfaction. It is our solemn commitment that any of our products with quality problems will be replaced within 3 months after purchase. We offer on-site follow-up service for product demonstration, free customer service to solve technical issues, free mold opening technologies, free technical training on pad printing silicon usage and rubber head making. What you need is what we pursue. We are committed to back you up in producing first class products.
Customers and distributors from around the world are welcomed to negotiate with us for business cooperation. Let us join hands and strive for mutual prosperity.
Any more information please fell free to contact with Ms. Eileen
E-mail: eileen(at)szrl(dot)net
Tel: 0086-755-89948294
Fax: 0086-755-89948030
Mobile: 0086-13724229791 |
| Business Type: |
Exporter, Manufacturer |
| Areas of
Interest: |
1. Chemicals/Rubber
2. Building & Construction/Materials
|
|
|
|
Offers
From This Member (3) |
|
|
|
[Sell] RTV molding silicon |
 |
|
RTV molding silicon applications
RTV molding silicon is maily used in Concrete, soap,Toys , ceilings, gift, house decoration, plate engrave, sculpture replica, arts & crafts, resin crafts, poly resin crafts, unsaturated resin crafts, candle crafts, plastic crafts, heritage copying , plaster crafts , Buddhist statue , crafts cement products, plastic toys, handicrafts, stationery, sculpture, reproduction of cultural relic, shoe sole molds, and so on.
RTV molding silicon features
HY-620 RTV molding silicon and HY-640 RTV molding silicon are particularly suitable for pouring mould.
HY-620 RTV molding silicon is for small crafts mould making, while HY-640 RTV molding silicon is for large crafts mould making.
Common features of HY-620 RTV molding silicon and HY-640 RTV molding silicon: light viscosity, good fluidity, easy-operation, good tension and high tear strength.
HY-628 RTV molding silicon and HY-638 RTV molding silicon are particularly suitable for brushing mould making.
Common features of HY-628 RTV molding silicon and HY-638 RTV molding silicon: moderate viscosity, easy-operation. Agents are available if requested. It won’t affect the quality of silicon rubber but to make the operation much easier.
Frequently asked questions of RTV molding silicon
Why is the appearance of the finished mold striate and unsmooth?
It is because the appearance of the product or the model itself is not perfect, and it has not been polished before the further operation. So when you make silicon molds, firstly you should polish the product, spray the mold spray evenly on the product. In this case, the problem can be avoided.
Anymore information about RTV molding silicon, please feel free to contact Ms Eileen CHEN.
TEL: 0086-755-89948294
MOBILE: 0086-13724229791
E-mail, eileen (at) szrl (dot) net |
|
| » Chemicals/Rubber |
|
|
|
[Sell] Two Component Molding Silicone Rubber(HY-638#) |
|
|
Two Component Molding Silicone Rubber(HY-638#)
Introduction of Two Component Molding Silicone Rubber(HY-638#):
1. Two Component Molding Silicone Rubber(HY-638#): flowable liquid silicon and catalyst.
2. Two Component Molding Silicone Rubber(HY-638#) Cures at room temperature within 4-6 hours.
FEATURES of Two Component Molding Silicone Rubber(HY-638#):
1. Two Component Molding Silicone Rubber(HY-638#) has An exceptional fluidity and good operability.
2. Two Component Molding Silicone Rubber(HY-638#) has good Temperature and deformation resistance as well as low shrinkage.
3. Two Component Molding Silicone Rubber(HY-638#) has High duplication times.
Operations for Two Component Molding Silicone Rubber(HY-638#):
Step 1 to use Two Component Molding Silicone Rubber(HY-638#):
Take 100g of part A and add 2g of part B and mix the silicon rubber and the curing agent evenly.
Step 2 to use Two Component Molding Silicone Rubber(HY-638#): vacuum pumping
Without exception, this takes less than 10 minutes. Otherwise, it will cause cross linking reaction, and no more further steps will be available.
Step 3 to use Two Component Molding Silicone Rubber(HY-638#): Brushing cast & Perfusion Molding operation.
If you are interested any more information about Two Component Molding Silicone Rubber(HY-638#), PLS feel free to contact Miss Eileen CHEN.
Tel: 0086-755-89948294
Mobile: 0086-13724229791
E-mail, eileen (at) szrl (dot) net |
|
| » Chemicals/Rubber |
|
|
|
[Sell] Sculpture Arts Casting with RTV liquid silicone rubber is used for |
|
|
Sculpture Arts Casting with RTV liquid silicone rubber is used for
- Unsaturated polyester resins, epoxy resins, polyurethane resins
- Polyurethane elastomers
- Natural and synthetic waxes, candle, soap
- Plasters, gypsum, column, cornices, domes, cements, concrete
- Low-melting point toys
- Imitation wood and bench
Advantages of Sculpture Arts Casting with RTV liquid silicone rubber
A. Shore A from 15 to 40 hardness after curing
B. Moderate viscosity, easy-operation
C. Excellent mechanical properties, in particular tear strength and tensile strength.
D. Excellent flexibility and it is easy to demould
E. High temperature resistance, high duplication times and repeated use
F. Range of catalysts allows the Sculpture Arts Casting with RTV liquid silicone rubber to fulfill requirements for various applications and using habit
Operation Instructions of Sculpture Arts Casting with RTV liquid silicone rubber:
1. Weigh a certain amount of silicone rubber, and then add curing agent by 2%-3% of silicone rubber. Ensure that all the silicone rubber is used in short time.
2. Fully and Evenly stirring the silicone rubber, then put them in vacuum and pump 3-5 minutes
3. Curing speed is closely related to the temperature and humidity, the higher the temperature and humidity, the faster the curing.
(Customers can choose curing agent or adjust the amount of curing agent in order to reach appropriate curing speed according to the weather.)
How to choose the right Sculpture Arts Casting with RTV liquid silicone rubber
1) The small size products with fine and precision patterns, you should choose soft silicone, with hardness at about 18 to 23 shore A for easy demoulding
2) Large size products, you should shoose hard silicone, with hardness at about 35 to 40 shore A, then the mold will not deformation.
As a direct professional manufacturer of Sculpture Arts Casting with RTV liquid silicone rubber, our Hong Ye Silicone Rubber Company could not only offer you with the best silicone rubber, but also free technique support on the silicone rubber application sollutions, including silicone mold making teaching courses, products making applications, etc.
Any further information about our Sculpture Arts Casting with RTV liquid silicone rubber, please feel free to contact Ms. Eileen CHEN
TEL: 0086-755-89948294
MOBILE: 0086-13724229791
E-mail, eileen(at)szrl(dot)net |
|
| » Chemicals/Rubber |
|
|
|
|
|
Pages: 1
|
|
|
|
|
