|
|
|
|
|
|
|
[Sell]
Silane coupling agent Si 69 |
 |
|
Chemical name:Bis[3-(triethoxysilyl)propyl]tetrasulfise
CAS No:40372-72-3
Molecular weight:538.95
Molecular formula:C18H42O6S4Si2
Application:CG-Si69 is a kind of silane coupling agent with multiple functional groups successfully used in rubber industry to improve modulus and tensile strength of rubber, to reduce the compound viscosity and save process energy consumption. It is especially applicable for polymers with double bond or rubber formulation with hydroxyl fillers. The suitable fillers include silica, silicate, clay, etc. The suitable rubber include natural rubber (NR), Butadiene styrene rubber (SBR), Isoprene rubber (IR), Butadiene rubber (BR), Acryloni-trile butadiene rubber (NBR), Ethylene propylene diene rubber (EPDM), etc.
Storage:Sealed and stored in a cool, dry and ventilated place, moisture-proof and waterproof, away from fire and heat sources.
Packaging:5L, 10L, 25L, 200L PE plastic drum or 1000L IBC drum.
Specification:
Density(25°C),g/cm3：1.060-1.100
Total Sulfur,%：22
Boiling Point ：250°C
Flash Point：106°C
Refractive Index(nD20):1.4600-1.5000
Appearance：Yellow or light yellow transparent liquid.
Dissolvability: Be soluble in organic solvent. It is almost insoluble in water.
Main products list:
Masterbatch products:MBT-80,MBTS-80,TBZTD-80,CBS-80,TBBS-80,S-80,DTDM-80,ZDEC-80,ZDBC-80
Rubber accelerator:
MBT, MBTS, CBS,TBBS,NOBS,TMTD,DCBS,DPG, TMTM, ZDEC,ZDBC,DTDM,ETU,DPTT
Rubber antioxidant: DTPD(3100),TMQ, IPPD, 6PPD,MBI,BHT
Antiscorching agent: PVI
silane coupling agent Si 69
Silicone rubber |
|
» Posted by: Henan T & N Chemical Co., Ltd [China]  |
|
|
|
|
|
[Sell]
Rubber accelerator DCBS(DZ) |
|
|
Chemical name:N,N-Dicyclohexyl-2-Benzothiazole sulfenamide
CAS No:4979-32-2
Molecular weight:346.56
Molecular formula:C19H26N2S2
Properties:Cream-colored Granule wilh taste bitter. The density is 1.26, Soluble in acetone organic liquids, including fats and oils, insoluble in water.
Application:DCBS is a sulfenamide accelerator with excellent anti-scorchingproperty and delayed onset of cure. It is compatible with natural and synthetic rubbers, suitable for radial ply tyre, rubber belts and shock absorber, etc. Particularly it produces good adhesion to metal.
Storage:The product should be stored in the dry and cooling place withgood ventilation, avoiding exposure of the packaged product to direct sunlight. The validity is 1 year. Notes The product could be ultrafine powder based on customer accurate requirement.
Packaging:25kg plastic woven bag, paper with plastic film bag
Specification:
Item Powder Oiled powder Granule
Appearance Cream-colored granule
Initial M.P. ℃ ≥ 97 97 97
Loss on drying % ≤ 0.3 0.5 0.3
Ash % ≤ 0.3 0.3 0.3
Residue on 150μm sieve % ≤ 0.1 0.1
Additive % 1.0-2.0
Granule Diameter mm 1.0-3.0
Main products list:
Masterbatch products:MBT-80,MBTS-80,TBZTD-80,CBS-80,TBBS-80,S-80,DTDM-80,ZDEC-80,ZDBC-80
Rubber accelerator:
MBT, MBTS, CBS,TBBS,NOBS,TMTD,DCBS,DPG, TMTM, ZDEC,ZDBC,DTDM,ETU,DPTT
Rubber antioxidant: DTPD(3100),TMQ, IPPD, 6PPD,MBI,BHT
Antiscorching agent: PVI
silane coupling agent Si 69
Silicone rubber |
|
| » Posted by: Henan T & N Chemical Co., Ltd [China] |
|
|
|
|
|
[Sell]
Rubber Vulcanising Agent DTDM |
|
|
CAS No:103-34-4
Molecular weight:236.37
Molecular formula:C8H16N2O2S2
Properties:White or light yellow crystals. Relative density: 1.32-1.38g/cm3.Soluble in alcohol and acetone, benzene, ethlene dichloride; Insoluble in water and fatty. No poison.
Application:It is used as the rubber accelerator and vulcanized agent of natural rubber, synthetic rubber. Under the curing temperature, it can release active sulfur, effective sulfur content is about 27%. It has operating safety, curing speed is slow when it is used alone. The curing speed can be arise when used with thiazole, thiurams, dithiocarbamates. There are many advantages, such as no-spray, no-pollution, no discolor, ease to disperse. It is especially suitable to butadiene rubber. It is mainly used to manufacture tyres, inner tube, rubber belt, heat-resistance rubber products, etc..
Storage:The product should be sealed and stored in the dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight. The validity is one year.
Packaging:25kg plastic woven bag lined with plastic film bag, kraft paper bag or jumbo bag.
Specification:
Item Specification
Oil extension Non Oil extension
Appearance(Visual White or light yellow crystal
inspection)
Initial M.P. ℃≥ 120 120
Ash%≤ 0.3 /
Heating Lose%≤ 0.5 0.5
Sulfur Content% 25-29 25-29
Oil Content% 1-2 /
Fineness through ≥99 /
（250）%
Main products list:
Masterbatch products:MBT-80,MBTS-80,TBZTD-80,CBS-80,TBBS-80,S-80,DTDM-80,ZDEC-80,ZDBC-80
Rubber accelerator:
MBT, MBTS, CBS,TBBS,NOBS,TMTD,DCBS,DPG, TMTM, ZDEC,ZDBC,DTDM,ETU,DPTT
Rubber antioxidant: DTPD(3100),TMQ, IPPD, 6PPD,MBI,BHT
Antiscorching agent: PVI
silane coupling agent Si 69
Silicone rubber |
|
| » Posted by: Henan T & N Chemical Co., Ltd [China] |
|
|
|
|
|
[Sell]
Rubber accelerator DPG (D) |
|
|
CAS No:102-06-7
Chemical name:Diphenyl guanidine
Molecular weight:211.27
Molecular formula:C13H13N3
Properties:
Grayish-white powder(granule)No taste, no poison. Densiy is 1.08--1.19. Soluble in acetone, ethyl acetate, benzene, alcohol, slightly soluble in CCl4; Insoluble in water and gasoline.
Application:
Used as a secondary accelerator with thiazoles and sulphenamides in NR and SBR compounds. Exhibits better storage stability compared to thiuram and dithiocarbamates but is not so active. DPG can be used in latex as secondary gelling agent (foam stabilizer) in the silico-flouride foam process.
Storage:
Keep container tightly closed in a cool, well-ventilated place. The recommended maximum storage life is 2 years when stored under normal conditions.
Packaging:
25kg plastic woven bag, paper with plastic film bag, kraft paper bag or jumbo bag.
Specification:
Item Powder Oiled powder Granule
Item Gray-white powder(granule)
Initial M.P. ℃ ≥ 145 145 145
Loss on drying % ≤ 0.3 0.5 0.3
Ash % ≤ 0.3 0.3 0.3
Residue on 150μm
sieve % ≤ 0.1 0.1
Residue on 63μm
sieve % ≤ 0.5 0.5
Additive % 0.1-2.0
Granule Diameter mm 1.5
Main products list:Â Â
Masterbatch products:MBT-80,MBTS-80,TBZTD-80,CBS-80,TBBS-80,S-80,DTDM-80,ZDEC-80,ZDBC-80Â Â
Rubber accelerator:
MBT, MBTS, CBS,TBBS,NOBS,TMTD,DCBS,DPG, TMTM, ZDEC,ZDBC,DTDM,ETU,DPTT Â
Rubber antioxidant: DTPD(3100),TMQ, IPPD, 6PPD,MBI,BHTÂ Â
Antiscorching agent: PVIÂ Â
silane coupling agent Si 69Â Â Â
Silicone rubber |
|
| » Posted by: Henan T & N Chemical Co., Ltd [China] |
|
|
|
|
|
[Sell]
High quality direct fast turquoise blue gl |
|
|
| [ Colour Index ] : C.I. Direct Blue 86 [Cas No]. 1330-38-7 [Molecular Weight]: 782.17 [H.S. Code]: 3204140000 [Appearance]: Dark Blue Powder [Strength]:100% 150% [Shade]: To the similar standard of the factory [Moisture%]:0.7 Max [Properties]:It is very soluble in water and alcohol [Use] : Dyeing Cotton and Viscose Fabric.Also can dying Sik and Nylon Fabric. [Packages]25KG Iron Drums , Cartons and Woven bags [Storage & Transportation]: The product must be stored in shade, dry & well-ventilated warehouse. Avoid to be contacted with oxidizing chemicals and combustible organic substances. Keep it away from direct sunlight, heat, sparks and open flames. Carefully handle the product and avoid damaging the package. Update Date:2011-7-1 21:45:12 |
|
| » Posted by: Hebei Lehui Import & Export Trading Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
Vulcanized rubber sheet |
|
|
| Vulcanized rubber sheet |
|
| » Posted by: Xiamen Xlong Seal Co.,Ltd [China] |
|
|
|
|
|
[Sell]
EPDM rubber ball |
|
|
| EPDM rubber ball EPDM: EPDM exhibits satisfactory compatibility with fireproof hydraulic fluids, ketones, hot and cold water, and alkali, and unsatisfactory compatibility with most oils, gasoline, kerosene, aromatic and aliphatic hydrocarbons, halogenated solvents and concentrated acids. The main properties of EPDM are its outstanding heat, ozone and weather resistance. The resistance to polar substances and steam are also good. It has excellent electrical insulating properties. It has good resistance to ketones, ordinary diluted acids and alkaline. Typical properties of EPDM vulcanizates are given below. EPDM can be compounded to meet specific properties to a limit depending first on the EPDM polymers available, then the processing and curing method(s) employed. EPDM are available in a range of molecular weights (indicated in terms of Mooney viscosity ML(1+4) at 125 C), varying levels of ethylene, third monomer and oil content |
|
| » Posted by: Xiamen Xlong Seal Co.,Ltd [China] |
|
|
|
|
|
[Sell]
FKM 90 solid rubber ball |
|
|
| FKM 90 solid rubber ball FKM There are four families of viton polymers: 1.A (Dipolymers of VF2/HFP): General purpose sealing. Automotive, Aerospace fuels & lubricants. Nominal polymer fluorine content: 66%. 2.B (Terpolymers of VF2/HFP/TFE): Chemical Process plant, Power Utility Seals & Gaskets. Nominal polymer fluorine content: 68%. 3.F (Terpolymers of VF2/HFP/TFE): Oxygenated Automotive fuels. Concentrated aqueous inorganic acids, water, steam. Nominal polymer fluorine content: 70%. 4.Specialty types include GLT, GBLT, GFLT & Viton Extreme (Copolymers of TFE/Propylene and Ethylene/TFE/PMVE): Automotive, Oil Exploration, Special Sealing & Ultra Harsh Environments. |
|
| » Posted by: Xiamen Xlong Seal Co.,Ltd [China] |
|
|
|
|
|
[Sell]
EPDM o ring cord |
|
|
| EPDM o ring cord Ethylen-Propylen-Dien-Kautschuk (EPDM) The range of uses of peroxydically cross-linked EPDM includes in hot water and steam seals. EPDM is also very resistant to ageing and ozone. Compared with the usual types of synthesis natural rubber it has good resistance to cold temperatures. EPDM is not resistant to aliphatic or aromatic hydrocarbons or mineral oil products. Resistance to chemicals, and also to oxidising agents, is very good. Temperature range from -50 C to +140 C depending on type. |
|
| » Posted by: Xiamen Xlong Seal Co.,Ltd [China] |
|
|
|
|
|
[Sell]
customized rubber ring |
|
|
| customized rubber ring Products for industry Metallurgy / Boat and ship / Water system / Electric power / Petroleum&chemical / Nuclear power |
|
| » Posted by: Xiamen Xlong Seal Co.,Ltd [China] |
|
|
|
|
|
[Sell]
FKM 80 x ring |
|
|
| FKM There are four families of viton polymers: 1. A (Dipolymers of VF2/HFP): General purpose sealing. Automotive, Aerospace fuels & lubricants. Nominal polymer fluorine content: 66%. 2. B (Terpolymers of VF2/HFP/TFE): Chemical Process plant, Power Utility Seals & Gaskets. Nominal polymer fluorine content: 68%. 3. F (Terpolymers of VF2/HFP/TFE): Oxygenated Automotive fuels. Concentrated aqueous inorganic acids, water, steam. Nominal polymer fluorine content: 70%. 4. Specialty types include GLT, GBLT, GFLT & Viton Extreme (Copolymers of TFE/Propylene and Ethylene/TFE/PMVE): Automotive, Oil Exploration, Special Sealing & Ultra Harsh Environments |
|
| » Posted by: Xiamen Xlong Seal Co.,Ltd [China] |
|
|
|
|
|
[Sell]
FKM 80 ED ring |
|
|
| FKM There are four families of viton polymers: 1. A (Dipolymers of VF2/HFP): General purpose sealing. Automotive, Aerospace fuels & lubricants. Nominal polymer fluorine content: 66%. 2. B (Terpolymers of VF2/HFP/TFE): Chemical Process plant, Power Utility Seals & Gaskets. Nominal polymer fluorine content: 68%. 3. F (Terpolymers of VF2/HFP/TFE): Oxygenated Automotive fuels. Concentrated aqueous inorganic acids, water, steam. Nominal polymer fluorine content: 70%. 4. Specialty types include GLT, GBLT, GFLT & Viton Extreme (Copolymers of TFE/Propylene and Ethylene/TFE/PMVE): Automotive, Oil Exploration, Special Sealing & Ultra Harsh Environments |
|
| » Posted by: Xiamen Xlong Seal Co.,Ltd [China] |
|
|
|
|
|
[Sell]
PU 90 O Ring |
|
|
| PU 90 O Ring Polyurethane natural rubber (AU) Polyurethane / AU O-rings are characterised by especially high efficiency. Polyurethane / AU O-rings have very high mechanical values including resistance to friction and tearing, very good rebound properties and high gas proof properties. Resistance to fuel, and to many other common technical oils, especially those with higher aromatics content, is excellent. Thanks to its resistance to high temperatures (up to +125 C) and good low-temperature flexibility (down to -30 C) and outstanding resistance to oxygen and ozone, an O-ring seal of polyurethane natural rubber can be expected to last a long time. |
|
| » Posted by: Xiamen Xlong Seal Co.,Ltd [China] |
|
|
|
|
|
[Sell]
FKM 70 O Ring |
|
|
| FKM There are four families of viton polymers: 1. A (Dipolymers of VF2/HFP): General purpose sealing. Automotive, Aerospace fuels & lubricants. Nominal polymer fluorine content: 66%. 2. B (Terpolymers of VF2/HFP/TFE): Chemical Process plant, Power Utility Seals & Gaskets. Nominal polymer fluorine content: 68%. 3. F (Terpolymers of VF2/HFP/TFE): Oxygenated Automotive fuels. Concentrated aqueous inorganic acids, water, steam. Nominal polymer fluorine content: 70%. 4. Specialty types include GLT, GBLT, GFLT & Viton Extreme (Copolymers of TFE/Propylene and Ethylene/TFE/PMVE): Automotive, Oil Exploration, Special Sealing & Ultra Harsh Environments |
|
| » Posted by: Xiamen Xlong Seal Co.,Ltd [China] |
|
|
|
|
|
[Sell]
FKM o ring cord |
|
|
| FKM o ring cord FKM There are four families of viton polymers: 1.A (Dipolymers of VF2/HFP): General purpose sealing. Automotive, Aerospace fuels & lubricants. Nominal polymer fluorine content: 66%. 2.B (Terpolymers of VF2/HFP/TFE): Chemical Process plant, Power Utility Seals & Gaskets. Nominal polymer fluorine content: 68%. 3.F (Terpolymers of VF2/HFP/TFE): Oxygenated Automotive fuels. Concentrated aqueous inorganic acids, water, steam. Nominal polymer fluorine content: 70%. 4.Specialty types include GLT, GBLT, GFLT & Viton Extreme (Copolymers of TFE/Propylene and Ethylene/TFE/PMVE): Automotive, Oil Exploration, Special Sealing & Ultra Harsh Environments. |
|
| » Posted by: Xiamen Xlong Seal Co.,Ltd [China] |
|
|
|
|
|
[Sell]
Platinum Cure Silicone Foams |
|
|
Description of Platinum Cure Silicone Foams
Platinum Cure Silicone Foams is a soft, two-component platinum silicone flexible foam that is versatile and easy to use. HY-F663 Platinum Silicone Foams expands 3.5 times its original volume and develops a uniform 20 lb./cu. ft. cell structure . Vibrant colors can be achieved by adding SilcPigsilicone color pigments. Cured foam is high heat resistance (will resist up to 350°F/176°C), water resistant, UV resistant and resists oxidation and ozone degradation.
Typical Applications for Platinum Cure Silicone Foams
Platinum cure Silicone Foams can be used for a variety of industrial and special effects applications including making foam filled appliances, padding/seat cushioning, orthotics/orthopedics, potting and encapsulation of electrical circuits and vibration dampening. |
|
| » Posted by: hongyejie [China] |
|
|
|
|
|
[Sell]
Electronic Potting Silicone Rubber |
|
|
1. Product Feature of Electronic Potting Silicone Rubber
HY-9055 silicone rubber is a kind of low viscosity, Inherent flame resistance, two components addition cured potting silicone with heat-conducting. It cures with both on room temperature and heated temperature. It has the feature of the higher temperature the faster of the curing time. It can be applied to electronic components for insulation, waterproofing, fixed and flame retardant. It mainly applied in electronic components surface with materials of PC(Poly-carbonate)、PP、ABS、PVC, etc. and metal materials.
2. Typical Application of Electronic Potting Silicone Rubber
HY-9055 electronic potting silicone rubber could be applied to
- high powered electronics,
- DC/DC module and circuit board which requires heat dissipation and high temperature resistance.
-It can be broadly used for LED screen, Wind Power Generator, PCB substrate, etc.
3. Technical Guidelines of of Electronic Potting Silicone Rubber
a, Pls put part A and part B in separate container and stir evenly before mixing the two part together.
b, Mixing Ratio: part A: part B = 1:1
c, Deaeration the mixture in vacuum pump under 0.08 MPa for 3-5 minutes.Then the mixture could be used for pouring.
Note: The thickness of the silicone affects the curing time. If the silicone used is a little thick,then the curing time will be a little longer.The temperature also affects the curing time.When in lower temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization. With temperature of 80～100℃, the silicone will cure in 15 minutes; while in 25℃ room temperature, the silicone will cure around 8 hours. |
|
| » Posted by: hongyejie [China] |
|
|
|
|
|
[Sell]
Transparent silicone rubber |
|
|
Transparent silicone rubber Application
Transparent silicone rubber is specialize for crystal silicone mold, imitation zircon silicone mold , crystal resin diamond silicone mold, crystal facets diamond silicone mold, and polyester/ polyurethane/ epoxy section diamond silicone mold, rhinestone jewelry silicone mold, amber silicone mold, crystal jewelry silicone mold, imitation agate silicone molo, jade mold, jewelry rings silicone mold , boutique crafts molding and casting.
Transparent silicone rubber Description
Transparent silicone rubber is the best choice for diamond molding, crystal molding, resin crystal rhinestone molding.
Transparent silicone rubber is suitable for flat dies and special three-dimensional mold plastic mold replication
Transparent silicone rubber is the best choice of mold making material for complex shape and high-precision products molding & casting.
Transparent silicone rubber Characteristics
* Low shrinkage (less than 0.1% )
* High tensile and tear strength with high copy times
* Hing heat resistance which can up to 250 °C
* Easy for operation (mixing ratio at 1:1 /10:1)
* Very good flow and easy for pouring operation
* Fast and non-shrink cure at room temperature which can be accelerated considerably by the application of heat |
|
| » Posted by: hongyejie [China] |
|
|
|
|
|
[Sell]
Liquid Pad Printing Silicone Rubber Material |
|
|
Specification
- Durable
- Good effects for printing
- Good quality without any impurity
- Good resilience
- Adjustable hardness
Liquid Pad Printing Silicone Rubber Material
1. Applications of liquid pad printing silicone rubber
Pad printing silicone rubber is mainly use for printing irregular patterns of plastic toys, electroplating toys and trade makers . Pad printing silicone rubber as a carrier which transfer patterns on the steel plate to the toys products surface.
2. Features of liquid pad printing silicone rubber
a. resistance to deformation, high-temperature
b. high printing times
c. good aging resistance
d. exceptional elasticity
e. great printing effect
3. Operation Instructions of liquid pad printing silicone rubber
Pad printing silicone rubber is two-component silicone, part A is liquid silicon rubber, part B is catalyst. The usual mixture of silicone rubber and catalyst is 100: 2 or 100: 3. E.g. we take 100g of liquid silicon rubber and 2g-3g catalyst, mix them and pour it to your mold. A fter 2-4 hours, you will get a Pad printing silicone rubbe |
|
| » Posted by: hongyejie [China] |
|
|
|
|
|
[Sell]
Platinum Cure Molding Silicone Rubber RTV |
|
|
Strenghts for platinum cure molding rubber silicone rtv
Platinum cure molding rubber silicone rtv is used for prototyping and the reproduction of parts. Silicone moulds can be constructed in many different forms depending on the shape of the part you are making. In this section we will outline how to create the easiest one part flat back mould.
Platinum cure molding rubber silicone rtv is used for prototyping and the reproduction of parts. Silicone moulds can be constructed in many different forms depending on the shape of the part you are making. In this section we will outline how to create the easiest one part flat back mould.
Why platinum cure molding rubber silicone rtv
Silicone is the first choice of material when casting 3 dimentional shapes that contain undercuts as it exhibits excellent release properties, a high level of surface detail, very good chemical and high temperature resistance.
It comes in a two-component system (base + catalyst) available in a hardness range of very soft to medium. It is available for making moulds that are poured, brushed or sprayed
Features of platinum cure molding rubber silicone rtv
1. Good characteristics of easy-operation
2. Light viscosity and good flowability
3. Low shrinkage
4. Favorable tension
5. No deformation
6. Favorable hardness
7. High temperature resistance, acid and alkali-resistance and ageing resistance
8. Food grade, non-toxic |
|
| » Posted by: hongyejie [China] |
|
|
|
|
|
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 next»
|
|
|
