|
|
|
Company Name: |
shenzhen hongye jie technology co.,ltd |
| Contact Person: |
Candy |
| City: |
shenzhen |
| Country: |
China
 |
| Local Time: |
|
| E-mail: |
Premium
Membership Required (Join Free Today) |
|
| Introduction: |
Our company
Hong Ye Jie Technology Co.,Ltd,which was established in 1998, is a Science and technology corporation which is engaged in production, R & D, and sales of silicone rubber. It sets up Hong Kong Hongye Ltd., Shenzhen Hongye silicone rubber Factory and other affiliated enterprises in 2005.
Our products including 36 series in hundreds of kinds of silicone products like silicone rubber, RTV-2 molding silicone rubber, silicone rubber for manual model design,shoe sole mold silicone rubber,silicon oil, pad printing silicone rubber, encapsulant and potting compound, silicone rubber for LED display, electronic thermolysis ointment, thermal conductivity silicone, special silicone rubber for CPU, silicone tube, silicone membrane, silicone sealant , liquid silicone rubber, addition cure RTV silicone rubber, HTV silicone rubber, solid silicone rubber, gross rubber, silicone rubber sheet, hot stamping silicone plates, hot stamping silicone roller,etc. These are currently been exported to Southeast Asia, Europe, the America and other 50 countries and regions.
|
| Business Type: |
Manufacturer |
| Areas of
Interest: |
1. Chemicals/Rubber
|
|
|
|
Offers
From This Member (7) |
|
|
|
[Sell] liquid mold making RTV-2 silicone |
 |
|
Applications of liquid mold making RTV-2 silicone:
liquid mold making RTV-2 silicone is mainly applicable to manual mold design, PVC plastic molds, cement product molds, melting point alloy molds, alloy toy craftworks, plastic toy craftworks, gifts and stationery, large statues, duplication of cultural relics, shoe sole mold fabrication, pad printing positioning, shock resistance for electronic equipments, etc
Features of liquid mold making RTV-2 silicone
1. Good characteristics of easy-operation
2. Ligh viscosity and good flowability
3. Low shrinkage
4. Favorable tension
5. No deformation
6. High temperature resistance, acid and alkali-resistance and ageing resistance
For getting further information about liquid mold making RTV-2 silicone, PLS contact with Miss Nancy
Tel: 86-18938867585
email:hyr@szrl.net
|
|
| » Chemicals/Rubber |
|
|
|
[Sell] RTV-2 liquid mold making silicon |
|
|
Applications of RTV-2 liquid mold making silicon:
RTV-2 liquid mold making silicon is mainly applicable to manual mold design, PVC plastic molds, cement product molds, melting point alloy molds, alloy toy craftworks, plastic toy craftworks, gifts and stationery, large statues, duplication of cultural relics, shoe sole mold fabrication, pad printing positioning, shock resistance for electronic equipments, etc
Features of RTV-2 liquid mold making silicon
1. Good characteristics of easy-operation
2. Ligh viscosity and good flowability
3. Low shrinkage
4. Favorable tension
5. No deformation
6. High temperature resistance, acid and alkali-resistance and ageing resistance
For getting further information about RTV-2 liquid mold making silicon, PLS contact with Miss Nancy
Website:www(dot)szrl(dot)net
Skpy:nancy19870715
MOB:86-18938867585 |
|
| » Chemicals/Rubber |
|
|
|
[Sell] Casting silicon for making molds |
|
|
1 Application of Casting silicon for making molds
A.PU molds making
B.Plaster , gypsum molds making
C.Resin crafts molds making
D.Cement crafts molding
E. Concrete crafts molding
F. Stone crafts molding
G. Candle crafts molding
More information about Casting silicon for making mold , please contact with Miss Nancy
Tel: 86-18938867585
|
|
| » Chemicals/Rubber |
|
|
|
[Sell] RTV tin catalyst silicone rubber |
|
|
Applications of RTV tin catalyst silicone rubber:
RTV tin catalyst silicone rubber is mainly applicable to manual mold design, RTV tin catalyst silicone rubber can used to PVC plastic molds, cement product molds, melting point alloy molds, alloy toy craftworks, plastic toy craftworks, gifts and stationery, RTV tin catalyst silicone rubber can also used for large statues, duplication of cultural relics, shoe sole mold fabrication, pad printing positioning, shock resistance for electronic equipments, etc
Features of RTV tin catalyst silicone rubber:
1. RTV tin catalyst silicone rubber have Good characteristics of easy-operation
2. RTV tin catalyst silicone rubber have Good characteristics of Ligh viscosity and good flowability
3. RTV tin catalyst silicone rubber have Good characteristics of Low shrinkage
4. RTV tin catalyst silicone rubber have Good characteristics of Favorable tension
5. RTV tin catalyst silicone rubber have Good characteristics of No deformation
6. RTV tin catalyst silicone rubber have Good characteristics of Favorable hardness
7. RTV tin catalyst silicone rubber have Good characteristics of High temperature resistance,
8. RTV tin catalyst silicone rubber have Good characteristics of acid and alkali-resistance
9, RTV tin catalyst silicone rubber have Good characteristics of ageing resistance
For getting further information about RTV tin catalyst silicone rubber, PLS contact with Miss Nancy
mob: 86-18938867585 |
|
| » Chemicals/Rubber |
|
|
|
[Sell] molding silicon rubber |
|
|
Applications of molding silicon rubber
molding silicon rubber is mainly applied for making various molds,such as reproduction of poly resin, epoxy, polyurethane-polymer, plaster, gypsum, soaps, candle & lighting, architecture, decorative arts and crafts, plastic toy, gift and stationery, big statue, cultural relic product, etc..
Features of molding silicon rubber
Low shrinkage, no deformation, good elasticity, high duplication times, etc.
If you need more information of molding silicon rubber,PLS contact Miss Nancy Feng :
TEL: 0086 -755 - 89948013
Mobile: 0086 -18938867585
|
|
| » Chemicals/Rubber |
|
|
|
[Sell] Dow Corning Silicone RTV 3481 |
|
|
Applications of HY625# similar to DC silicone RTV 3481#
RTV- silicone rubber is mainly be used as following:
1.Decoration building mould making, including architecture column, porch column, interior column etc
2.Unsaturated rein crafts, epoxy resin crafts, poly resin crafts , plastic toys and so on.
3.Concrete decoration, garden statue ,plant, sculpture, Buddha and animal crafts .
Introduction
RTV-2 silicone rubber for molding are generally named Two part room-temperature Valcanizatoin silicone rubber, a kind elastic silicone rubber mold which features good resistance to deformation, good durability
Features of Rtv-2 silicone rubber
1 .Two part of liquid fluid: liquid white silicone and curing agent.
2. Cure at room-temperature within 4-8 hours, but all performance will act perfectly when it cure within 24 hours.
3 .Good fluidity and excellent operation.
4 .Good resistance to weather, temperature, aging, acid..
5 .Excellent tear strength, comfortable duplication times.
Technology short compare of our HY625# and DC Silicone RTV 3481 :
Model
Color
Mixing ratio (%)
Pot life (mins)
Demould
time
( hrs)
Hardness ( A0 )
Tensile-strength (kgf/cm2)
Tear-strength (kgf/cm)
Viscosity
(cps)
Shrinkage
rate (%)
Elongation
(%)
type
DC3481#
white
100 : 5
90
24
25
≥ 40
≥ 23
25000
≤0.5
370%
condensation
HY625#
white
100 : 5
30
4-6
25
≥ 39
≥ 25
23000
≤0.3%
500%
condensation
Attention:
Usually , we do not suggest customer to add silicone oil to the silicone to adjust the shore A. If necessary, we would suggest to add as 5% silicone oil.
For getting further information about our silicone products, PLS contact with Miss Nancy
TEL: 0086.-755-89948013 or
Mobile: 0086-18938867585
|
|
| » Chemicals/Rubber |
|
|
|
[Sell] molding silicon rubber |
|
|
molding silicon rubber
Applications of molding silicon rubber
molding silicon rubber is mainly applied for making various molds,such as reproduction of poly resin, epoxy, polyurethane-polymer, plaster, gypsum, soaps, candle & lighting, architecture, decorative arts and crafts, plastic toy, gift and stationery, big statue, cultural relic product, etc..
Features of molding silicon rubber
Low shrinkage, no deformation, good elasticity, high duplication times, etc.
molding silicon rubber
If the customer wants to make large products and large size molds, the mold should be made of silicon rubber with high hardness. On the contrary, if the mold with fine and precision patterns, it should be made of silicon with low hardness. The amount of the curing agent depends on the actual requirements of the customer. If molds requiring fast drying and demold, more curing agent is needed; contrarily, if molds requiring slower drying and demold, less curing agent is needed.
(Note: our company does not recommend you to add silicone oil. If a special soft silicone mold or fine detailed and complex patterns products are required, 5%-10% silicone oil can be added to soften the mold for easy demold.)
If you need more information of molding silicon rubber,
PLS contact Miss Nancy Feng :
TEL: 0086 -755 - 89948013
Mobile: 0086 -18938867585 |
|
| » Chemicals/Rubber |
|
|
|
|
|
Pages: 1
|
|
|
|
|
