|
|
|
Company Name: |
Shenzhen Hong Ye Jie Technology CO., Ltd.（CN） |
| Contact Person: |
Andy |
| City: |
shenzhen |
| Country: |
China
 |
| Local Time: |
|
| E-mail: |
Premium
Membership Required (Join Free Today) |
|
| Introduction: |
Shenzhen Hong Ye Jie Technology CO., Ltd. is an experienced manufacturer of silicone rubber in China. Our main products include silicone rubber, RTV silicone, RTV-2 molding silicone, silicone rubber for manual model design,shoe sole mold silicone rubber,pad printing silicone rubber, silicon oil, liquid silicone rubber, addition cure silicone rubber, encapsulant and potting compound, silicone rubber for LED display, electronic thermolysis ointment, thermal conductivity silicone, special silicone rubber for CPU, silicone sealant, HTV silicone rubber, solid silicone rubber, gross rubber, silicone rubber sheet, hot stamping silicone plates, hot stamping silicone roller,etc. Due to reliable quality and competitive prices, these products have been well popular in over 70 countries including Malaysia, Philippines, Iran, Saudi Arabia, Turkey, India, Russia, France, United Kingdom, Spain, Poland, Canada, Mexico,USA, Australia, South Korea,etc. Welcome old and new customers and distributors anywhere around the world to neogotiate for business and cooperation at anytime. |
| Business Type: |
Exporter, Manufacturer |
| Areas of
Interest: |
1. Arts & Furniture/Crafts
2. Arts & Furniture/Decoration
3. Arts & Furniture/Furniture
4. Building & Construction/Construction
5. Chemicals/Rubber
|
|
|
|
Offers
From This Member (3) |
|
|
|
[Sell] Pad Printing Silicone Rubber |
 |
|
Pad Printing Silicone Rubber:
Pad printing silicone rubber is specially designed for silicon pads which requires to be exquisite, without impurity or granules, and has advantages such as wearability, high-temperature resistance, and good in printing effect due to adding American Dupont Teflon high-temperature resistance new material. Applications: It is mainly used for printing irregular patterns of plastic toys, electroplating products, electronic toys, trademarks. The silicon pad is a carrier which transfers the patterns from the steel plate onto the products’ surface.
.
Pad Printing Silicone Rubber Features:
Pad printing silicone rubber with high print times and abrasion resistance. Pad printing silicone rubber has good printing effects, permanent and durable. We can provide all kinds of color and our catalyst is free.
.
Pad Printing Silicone Rubber Operation Instructions:
Pad printing silicone rubber is two-component silicone, part A is liquid silicon rubber, part B is catalyst. The usual mixture of silicone rubber and catalyst is 100 to 2 or 100 to 3.we take 100g of liquid silicon rubber and 2g-3g catalyst, mix them and pour it to your mold. After 2 to 4 hours, you will get a Pad printing silicone rubber.
.
Frequently asked question of pad printing silicone rubber:
The reasons why the silicone pad has a short service life are listed as follows:
(1)The problem caused by inappropriate filtration of silicone rubber, and impurities in the packaging process due to the uncleanness of barrels and bags.
(2)The short service life of the silicone pad has a close relationship with the adding amount of silicone oil. The more the silicone oil added, the softer the silicone pad will be. The silicone oil will destroy the molecule of the silicone rubber, thereby bringing about the non-durable and easy ageing of the silicone pad.
(3)All the users should know the properties of pad printing silicone rubber. The service life of the silicone pad has close relationship with the size of the printed patterns. For example, if a big pattern to be printed, a big silicone pad is required; if a small pattern to be printed, a small silicone pad (the silicone pad has to be adjusted according to the size of the patterns, and the proportion between the size of the silicone pad and the pattern is 3:1.)
.
Payment & Shipping Terms:
Minimum Order Quantity: 100 Kilogram
Price: FOB shenzhen USD 7.8-15.6
Packaging Details: 25kg/drum and 200kg/drum
Delivery Time: within 3 days after receiving your bank receipt
Payment Terms: L/C,T/T,Western Union
Supply Ability: 8 Ton per Day
For more information, please contact with Mr Andy:
FAX: 0086-755-89948030
MOBILE: 0086-18938867592
E-mail:hyji(at)szrl(dot)net
MSN:haoee(at)msn(dot)cn
website:www(dot)szrl(dot)net |
|
| » Chemicals/Rubber |
|
|
|
[Sell] Electronic Potting Compound |
|
|
Product Feature
HY 9055 is a kind of low viscosity, Inherent flame resistance, two components addtion cured potting silicone with heat-conducting. It cures with both on room temperature and heated temperature. It has the feature of the higher temperature the faster of the curing time. It can be applied to electronic components for insulation, waterproofing, fixed and flame retardant. It mainly applied in electronic components surface with materials of PC(Polycarbonate)、PP、ABS、PVC, etc. and metal materials.
*
*
Typical Application
HY 9055 could be applied to
- high powered electronics
- DC/DC module and circuit board which requires heat dissipation and high temperature resistance.
-It can be broadly used for LED screen, Wind Power Generator, PCB substrate, etc.
*
*
TECHNICAL GUIDELINES
1. Pls put part A and part B in separate container and stir evenly before mixing the two part together.
2.Mixing Ratio: part A: part B = 1:1
3. Deaeration the mixture in vacuum pump under 0.08 MPa for 3-5 minutes.Then the mixture could be used for pouring.
4. Pls note that the thickness of the silicone affects the curing time. If the silicone used is a little thick,then the curing time will be a little longer.The temperature also affects the curing time.When in lower temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization. With temperature of 80～100 centigrade, the silicone will cure in 15 minutes; while in 25 centigrade room temperature, the silicone will cure around 8 hours.
*
Notes:
1.The following material may hinder the curing of HY 9055, So pls use after the test. When necessary, pls clean the application areas.
Organotin compound or Condensation silicone with organotin
Sulphur, sulfide and sulfur rubber materials.
Amine compounds as well as contains the amine materials.
Pewters solder flux
2. HY 9055 should be sealed storage.The mixture should be used up disposably to avoid causing waste.
3. HY 9055 belongs to non-dangerous goods, but keep away from mouth and eyes.
4. When it gets stratified after a period of storage, Please mix it evenly before using,which does not affect the performance.
*
*
PACKAGE
20Kg/pail as a set (Part A 10Kg + Part B 10Kg)
SHELF LIFE AND TRANSPORTATION
1. Twelve(12) months when stored at 24C in tightly closed original packages.
2. This kind of product is non-dangerous product, which could be transported as general chemicals.
3. Storage beyond the expired date doesnot necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
*
*
For more information, please contact with Mr Andy:
FAX: 0086-755-89948030
MOBILE: 0086-18938867592
E-mail:hyji(at)szrl(dot)net
MSN:haoee(at)msn(dot)cn
website:www(dot)szrl(dot)net |
|
| » Chemicals/Rubber |
|
|
|
[Sell] Silicone rubber for mold making |
|
|
Brief description:
Silicone rubber for mold making:
1. resistance to deformation, high-temperature
2. high reproduction times
3. good tensile strength
4. exceptional fluidity and good operability.
*
*
Silicone rubber for mold making applications
Silicone rubber for mold making is primarily intended for poly resin crafts, PU crafts, PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy , stationery gifts crafts industry, a large statue Buddha, furniture, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.
*
*
Silicone rubber for mold making description
Silicone rubber for mold making is white or red flowing liquid with general hardness of 22-50A after curing. Molding silicon rubber is a kind elastic silicon rubber mold which features with resistance to deformation, high-temperature, acid-alkali and expansion as well as high reproduction times, good tensile strength, tear strength and elongation.
*
*
Frequently asked questions of silicone rubber for mold making
Why does the silicone rubber mold have few molding times?
The silicone rubber mold has few molding times is due to follwoing reasons: adding too much silicone oil which will destroy the molecular of silicone rubber; making the mold for small and fine detailed products with higher hardness silicone rubber which is easy to break; making the mold for large products with soft silicone rubber which will reduce the tensile and tear strength of the mold, and the mold will have deformation. Thus, we should take the proper silicone rubber to make the mold for suitable products.
*
*
For more information, please contact with Mr Andy:
FAX: 0086-755-89948030
MOBILE: 0086-18938867592
E-mail:hyji(at)szrl(dot)net
MSN:haoee(at)msn(dot)cn
website:www(dot)szrl(dot)net
*
*
Place of Origin: Guangdong China
Brand Name: Hong Ye Silicone Rubber
Minimum Order Quantity: 200 Kilogram
Price: FOB shenzhen USD 5.20-7.40
Packaging Details: 25kg/drum and 200kg/drum
Delivery Time: within 3 days after payment confirmed in our bank.
Payment Terms: L/C,T/T,WesternUnion
Supply Ability: 8 Ton per Day
Certifications: RoHS.MSDS.SGS ISO9001:2000
|
|
| » Chemicals/Rubber |
|
|
|
|
|
Pages: 1
|
|
|
|
|
