|
|
|
Company Name: |
HONG YE CHEMICAL PLANT CO; LTD. |
| Contact Person: |
Brook Zhou |
| City: |
shenzhen |
| Country: |
China
 |
| Local Time: |
|
| E-mail: |
Premium
Membership Required (Join Free Today) |
|
| Introduction: |
We are a joint venture specializing in the manufacturing of molding silicon rubber, mold duplicating rubber for resin craft makers ,special silicon for manual molding ,shoe mold rubber ,pad printing silicon ,silicon oil ,107 base ,DMC etc for plastic toys factories ,With a product line of tens of categories ,we can offer quick copying with precise contraction rate for mold making .to reach the internationally leading quality standard with competitive price is our best ambition that merits your trust.
It is our solemn commitment that :any of our products with quality problems will be replaced within 3 months after purchase ;we offer on –site follow –up service for product demonstration ,free customer service to solve technical training on pad printing silicon usage and rubber head making .What you need is also what we pursue .We are committed to back you up in producing first class products.Customers old and new and distribution and deputation .Let’s join hands and strive for mutual prosperity .
|
| Business Type: |
Exporter, Manufacturer |
| Areas of
Interest: |
1. Chemicals/Other
|
|
|
|
Offers
From This Member (3) |
|
|
|
[Sell] HY-620 Silicone rubber for mold making |
 |
|
We are a joint venture specializing in the manufacturing of molding silicon rubber, mold duplicating rubber for resin craft makers ,special silicon for manual molding ,shoe mold rubber ,pad printing silicon ,silicon oil ,107 base ,DMC etc for plastic toys factories ,With a product line of tens of categories ,we can offer quick copying with precise contraction rate for mold making .to reach the internationally leading quality standard with competitive price is our best ambition that merits your trust.
It is our solemn commitment that :any of our products with quality problems will be replaced within 3 months after purchase ;we offer on –site follow –up service for product demonstration ,free customer service to solve technical training on pad printing silicon usage and rubber head making .What you need is also what we pursue .We are committed to back you up in producing first class products.Customers old and new and distribution and deputation .Let’s join hands and strive for mutual prosperity .
Silicone rubber for mold making description
Silicone rubber for mold making is white or red flowing liquid with general hardness of 22-50A°after curing. Molding silicon rubber is a kind elastic silicon rubber mold which features with resistance to deformation, high-temperature, acid-alkali and expansion as well as high reproduction times, good tensile strength, tear strength and elongation.
Silicone rubber for mold making applications
Silicone rubber for mold making is primarily intended for poly resin crafts, PU crafts, PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy , stationery gifts crafts industry, a large statue Buddha, furniture, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.
Silicone rubber for mold making operations
If the customer wants to make large products and large size molds, the mold should be made of silicon rubber with high hardness. On the contrary, if the mold with fine and precision patterns, it should be made of silicon with low hardness. The amount of the curing agent depends on the actual requirements of the customer. If molds requiring fast drying and demould, more curing agent is needed; contrarily, if molds requiring slower drying and demould, less curing agent is needed.
(Note: our company does not recommend you to add silicone oil. If a special soft silicon mold or fine detailed and complex patterns products are required, 5%-10% silicone oil can be added to soften the mold for easy demould.)
Frequently asked questions of silicone rubber for mold making
Why does the silicone rubber mold have few molding times?
The silicone rubber mold has few molding times is due to follwoing reasons: adding too much silicone oil which will destroy the molecular of silicone rubber; making the mold for small and fine detailed products with higher hardness silicone rubber which is easy to break; making the mold for large products with soft silicone rubber which will reduce the tensile and tear strength of the mold, and the mold will have deformation. Thus, we should take the proper silicone rubber to make the mold for suitable products.
Any questions of silicone rubber for mold making, please feel free to contact Brook :
HOTMAIL: brook(dot)zhou02(at)Hotmail(dot)com
E-mail: hyjw(at)szrl(dot)net
TEL: 086-755-89948294
MOBILE:086-18825205877 |
|
| » Chemicals/Rubber |
|
|
|
[Sell] Pad Printing Silicone Rubber |
|
|
Pad Printing Silicone Rubber Usages:
Pad printing silicone rubber is mainly use for printing irregular patterns of plastic toys, electroplating toys and trade makers. Pad printing silicone rubber as a carrier which transfer patterns on the steel plate to the toys products surface.
.
Pad Printing Silicone Rubber Features:
Pad printing silicone rubber with high print times and abrasion resistance. Pad printing silicone rubber has good printing effects, permanent and durable. We can provide all kinds of color and our catalyst is free.
.
Pad Printing Silicone Rubber Operation Instructions:
Pad printing silicone rubber is two-component silicone, part A is liquid silicon rubber, part B is catalyst. The usual mixture of silicone rubber and catalyst is 100: 2 or 100: 3. E.g. we take 100g of liquid silicon rubber and 2g-3g catalyst, mix them and pour it to your mold. A fter 2-4 hours, you will get a Pad printing silicone rubber.
.
Any questions of silicone rubber for pad printing, please feel free to contact Brook :
HOTMAIL:brook(dot)zhou02(at)hotmail(dot)com
E-mail:hyjw(at)szrl(dot)net
TEL: 086-755-89948294
MOBILE:086-18825205877
|
|
| » Chemicals/Other |
|
|
|
[Sell] Manual Molding Silicone Rubber |
|
|
a. Applications of Manual Molding Silicone Rubber
Manual Molding Silicone Rubber is mainly used for model design of manual mold, PVC plastic molds, cement products, low melting point alloy molds, alloy toys, plastic toys, electronics, handicrafts, stationery, large-scale sculpture, reproduction of cultural relic, shoe sole molds, pad printing allocation, Electronic equipment antivibration, etc.
b. Model Codes of Manual Molding Silicone Rubber
HY-528# is applicable to make molds of smaller products and the production will be 2-3 pieces.
HY-540#, compared to other two types, for its moderate hardness and better quality & performance, its production will be 20-30 pieces.
HY-570# is applicable to large size products duplications and Electronic equipment antivibration.
c. Operation Instructions for Manual Molding Silicone Rubber
RTV-2 Manual Molding Silicone Rubber is a flowable liquid, and the quality has nothing to do with the color. It consists of two component. Part A is a flowable liquid silicone rubber, part B is the curing agent. Firstly, after your previous work of dealing with the original model, take some liquid silicone rubber , add 2%-3% curing agent of the amount of silicon, and mix them evenly. Then after vacuum-pumping the mixture, you can pour it into the mold frame. The silicone mold will cured in 2-3 hours.
Note: The time for vacuum-pumping should be less than 3—5 mins ,otherwise, once the silicone rubber has cross-link reaction during vacuumizing, it will not be operated.
FAQ of manual molding silicone rubber –
How to prevent silicone manual molds getting sticky?
The main reason for this problem is that you do not handle the products or original molds well, then you should deal with the original mold or products carefully before molding. Such as for the products with a complicated pattern or a unsmoothed surface, you should polish and clean the products after which it will be molded ,then spray the release agent. Normally, the release agent can be Vaseline , detergent. liquid wax Etc. In practical process, you can bush different release agent according to different material.
The second reason is that the operator pour the silicone into the mold when the mixture is mixed evenly, then the finish silicone mold will not cure and dry entirely.
Further information on Manual Molding Silicone Rubber is available. Please feel free to contact Brook:
HOTMAIL: brook(dot)zhou02(at)hotmail(dot)com
E-mail:hyjw(at)szrl(dot)net
TEL: 086-755-89948294
MOBILE:086-18825205877
|
|
| » Chemicals/Other |
|
|
|
|
|
Pages: 1
|
|
|
|
|
