|
|
|
Company Name: |
HongYe Silicone Rubber Manufacture |
| Contact Person: |
Ms Joy Chow |
| City: |
shenzhen |
| Country: |
China
 |
| Local Time: |
|
| E-mail: |
Premium
Membership Required (Join Free Today) |
|
| Introduction: |
Shenzhen Hong Ye Jie Technology Co., Ltd. was established in 1998, is a Science and technology corporation which is engaged in production, R & D, and sales of silicone rubber. It sets up Hong Kong Hongye Ltd., Shenzhen Hongye silicone rubber Factory and other affiliated enterprises in 2005.
Our products including 36 series in hundreds of kinds of silicone products like silicone rubber, RTV-2 molding silicone rubber, silicone rubber for manual model design,shoe sole mold silicone rubber,silicon oil, pad printing silicone rubber, encapsulant and potting compound, silicone rubber for LED display, electronic thermolysis ointment, thermal conductivity silicone, special silicone rubber for CPU, silicone tube, silicone membrane, silicone sealant , liquid silicone rubber, addition cure RTV silicone rubber, HTV silicone rubber, solid silicone rubber, gross rubber, silicone rubber sheet, hot stamping silicone plates, hot stamping silicone roller,etc. These are currently been exported to Southeast Asia, Europe, the America and other 50 countries and regions.
To reach the internationally leading quality standard with competitive price is our permanent pursuit. We aim at supply high quality products to meet customers\' satisfaction. It is our solemn commitment that any of our products with quality problems will be replaced within 3 months after purchase. We offer on-site follow-up service for product demonstration, free customer service to solve technical issues, free mold opening technologies, free technical training on pad printing silicon usage and rubber head making. What you need is what we pursue. We are committed to back you up in producing first class products.
Welcome old and new customers and distributors anywhere around the world to negotiate for business and cooperations. Let\'s join hands and strive for mutual prosperity!
|
| Business Type: |
Manufacturer |
| Areas of
Interest: |
1. Chemicals/Rubber
|
|
|
|
Offers
From This Member (3) |
|
|
|
[Sell] Two Component Rtv Silicone Rubbers |
 |
|
Two Component Rtv Silicone Rubbers
Two Component Rtv Silicone Rubbers applications
Two Component Rtv Silicone Rubbers is suitatble for Product duplication and mold manufacture such as
1.Two Component Rtv Silicone Rubbers used for toys, gifts
2. Two Component Rtv Silicone Rubbers good for decoration, plate engrave
3. Two Component Rtv Silicone Rubbers suitable for human replica, art crafts,
4. Two Component Rtv Silicone Rubbers applicable for resin crafts, unsaturated resin crafts
5. Two Component Rtv Silicone Rubbers used for poly resin crafts, candle crafts, plastic crafts
6. Two Component Rtv Silicone Rubbers suitalble for stationeries, plaster crafts, Bunddhist statue crafts, etc.
Two Component Rtv Silicone Rubbers description
a. good characteristics of easy-operation
b.light viscosity and good flowability
c. favorable tension
d. low shrinkage
e. no deformation
f. high temperaure resistance, acid and alkali-resistance and ageing resistance
Two Component Rtv Silicone Rubbers operations
Firstly, after your previous work of dealing with the origianal moldel, take some liquid silicone rubber, add 2%~3% cuing agent of the amount of silicon and mix them evenly.
Then after vacuum-pumping the mixture, you cn pour it into the mold frame. The sillicone mold will cured in 2~3 hours.
Note: the time for vacuum-pumping should be less than 3-5mins, othewise, once the silicone rubber has cross-link reaction during vacuumizing. it will not be operated.
Any question abt Two Component Rtv Silicone Rubbers pls feel free to ask Ms. Joy
Tel: 86-755-89948158
86- 13554758940/18938867578
Fax: 86-755-89948030
|
|
| » Chemicals/Rubber |
|
|
|
[Sell] RTV2 silicone rubber |
|
|
RTV2 silicone rubber
Applications of RTV2 silicone rubber
RTV2 silicone rubber is intended for statue mold making ,candles.
RTV2 silicone rubber is application for plastic toys, relieve furniture.
RTV2 silicone rubber is used for architectural decoration, funiture decorative.
RTV2 silicone rubber is application for sculpture, art crafts mold making and so on.
Features of RTV2 silicone rubber
RTV2 silicone rubber for statue mold making is flowing liquid with general hardness of 22-50A° after curing with features:
1. RTV2 silicone rubber is resistance to deformation and high-temperature, acid-alkali and expansion
2. RTV2 silicone rubber is good tensile strength, tear strength and elongation
3. RTV2 silicone rubber is high reproduction times
Datasheet of RTV2 silicone rubber
Model
Appearance
Viscosity (cs)
Hardness (Ao)
Tensile Strength (kgf/c)
Tear Strength (kgf/)
Elongation (%)
Mixing ratio(%)
Operating Time(H)
Curing Time(H)
628
White
14000~16000
25~28
≥35
≥25
≥500
2~3
0.5
2~4
Model
Appearance
Viscosity (cs)
Hardness (Ao)
Tensile Strength (kgf/c)
Tear Strength (kgf/)
Elongation (%)
Mixing ratio(%)
Operating Time(H)
Curing Time(H)
728
White, red
15000~17000
26~28
≥35
≥22
≥470
2~3
0.5
2~4
Any more information of RTV2 silicone rubber , please feel free to contact Joy Chow
Tel: 0086-755-89948006
86-18938867578
Fax: 0086-755-89948030
|
|
| » Chemicals/Rubber |
|
|
|
[Sell] rtv liquid molding silicone rubber |
|
|
rtv liquid molding silicone rubber features
rtv liquid molding silicone rubber is flowing liquid silicone rubber with general hardness of 22- 50 shore A after curing with features:
a. good characteristics of easy-operation
b.light viscosity and good flowability
c. favorable tension
d. low shrinkage
e. no deformation
f. high temperaure resistance, acid and alkali-resistance and ageing resistance
rtv liquid molding silicone rubber application
rtv liquid molding Silicon rubber for PU/poly resin products, unsaturated resin products, plaster products, candles and gypsums crafts, toys, soap molds, statues,casting molds making, etc.
rtv liquid molding silicone rubber operations
rtv liquid molding silicone rubber is a kind of flowing liquid, if customers want to make large products and large size moulds, the mould should be made of silicone with low hardeness. The amount of curing agent depends on the actual requirements of the customer. If mould require fast drying and demould, more curing is needed.
Are there any question abt rtv liquid molding silicone rubber pls feel free to ask Ms.Joy
Tel: 086-0755-89948158
Cell phone:086- 13554758940/18938867578
Fax: 086-0755-89948030
|
|
| » Chemicals/Rubber |
|
|
|
|
|
Pages: 1
|
|
|
|
|
