|
|
Company Name: |
Shen Zhen Hong Ye Jie Silicone Rubber Technology Co., Ltd. |
Contact Person: |
Angel Yue |
City: |
Shenzhen |
Country: |
China
|
Local Time: |
|
E-mail: |
Premium
Membership Required (Join Free Today) |
|
Introduction: |
Company Name: Shenzhen Hong Ye Jie Technology Co., Ltd.
Business Type: Manufacturer Product/Service
(We Sell): RTV molding silicone,shoe mold rubber,pad printing silicon,silicon oil,107 base,molding silicone rubber,manual mold silicone,candle mold silicone,HTV silicone rubber, liquid silicone rubber
|
Business Type: |
Exporter, Manufacturer |
Areas of
Interest: |
1. Chemicals/Plastics 2. Chemicals/Rubber 3. Raw Materials/Metals 4. Raw Materials/Mines & Minerals
|
|
|
|
Offers
From This Member (4) |
|
|
|
[Sell] Shoe Mold Silicone Rubber |
|
|
1. Shoe mold silicone rubber applications Shoe mold silicone rubber is mainly used for shoe molds, sand casting, sole sampling, plaster models, simple products, products with non-complex patterns, as well as product models with stable size and non-deformation. 2.Features of Shoe mold silicone rubber a. shoe soles mold making b. Two-component silicone rubber with tin-catalyst c. Cured under room temperature d. low shrinkage e. excellent fexibility & easy demould 3. Shoe Mold Silicone Rubber Standard Datasheet: Model Appearance Viscosity (cps) Hardness (A°) Tensile Strength (Mpa) Tear Strength (KN/m) Elongation (%) Mixing ratio (%) Pot life(H) Demould time(H) 218 White ≤15000 18±2 ≥1.3 ≥5 ≥300 2~3 0.5~2 2~4 Notes: Mixing ratio, pot life and Demould time in the above table is measured under the room temperature of 25。C, relative humidity of 65% to 70%. The data is only for referfence, mixing ratio should be 2% to 3% modified according to various temperatures. Different colors are available if requested. 4. Shoe Mold Silicone Rubber Using Instruction: The component A of shoe Mold Silicone Rubber is white flowing liquid and the component B is the curing agent. a. Take silicone rubber of 100g and add 2% curing agent for mixing evenly. b. After the silicone rubber and the curing agent are completely mixed, put the silicon into a vacuum machine for deairing to remove the bubbles. c. After deaired, pouring the liquid silicone rubber into the product to be duplicated or into the mold frame. Notes: Shoe mold silicone rubber is used for pouring or brushing technique. That is to say, fix the product or sole model to be duplicated onto a plane plate, then enclose the plane frame with wooden plates to prevent the leakage of the silicon, mix the silicone rubber and the curing agent evenly according to the mixing ratio of 100 : 2 and pour them onto the sole model, then brush evenly with a wooden plate or a brush, and fill up the mold frame with gypsum after the silicone rubber is dried. Place of Origin: Guangdong China Brand Name Hong Ye Silicone Rubber Model Number: HY218, HY238 shoe mold silicone rubber Minimum Order Quantity: 200 Kilogram Price: FOB shenzhen USD 4.8~5.4/KG Packaging Details: vacuumed thick PE bag inside and iron barrel outside 25kg/drum and 200kg/drum Shipping Terms: Ocean freight/ Air lift Delivery Time: within 3 days after payment confirmed in our bank. Payment Terms: L/C,T/T Supply Ability: 8 Ton per Day Certifications:RoHS.MSDS.SGS ISO9001:2000 Any questions of RTV-2 silicone rubber for mold making, please feel free to contact Angel: MSN:angelfly369 Skype: angelfly369 Email:hysa@szrl.net Tel: 0086-755-89948294 Mob: 086-15273501823 Fax:086-755-89948030 Web:www(dot)szr(dot)net
|
|
» Chemicals/Rubber |
|
|
|
[Sell] liquid pad printing silicone rubber |
|
|
1. The application of pad printing silicone rubber: Pad printing silicone rubber is used for making the printing pads for plastic toys, electroplating products, electronic toys, craftworks, stationery, computer keyboard and so on. The printing pad then serves as a carrier to transfer patterns from the steel plate to the product’s surface. 2. Features of Pad printing silicone rubber HY912 HY916 a. Two components: silicone rubber and the curing agent b. American Dupont Teflon top-quality raw material c. White color d. Abrasion resistance e. good printing effect f. good resilience g. high temperature resistance h. top quality without impurities i. silicone oil can be added to adjust the hardness if necessary 3. Technical data of Pad printing silicone rubber Appearance: Yellow, red, green, white Viscosity(cs): 20000~25000 Hardness(A): 28-30 Tensile strength (kgf/cm) ≥35 Tear-strength (kgf/cm) ≥24 Elongation break: (%)≥400 Retractility (%): ≤0.3 Curing agent mixed rate(%): 2-3 Operate time(min): 30 Curing time(hours): 2-4 4. Brief operation instructions and tips: mixing data for silicon and curing agent a. Added with 1% of curing agent, silicon can still flow within 2.5 hours, mold can be released in6-8 hours. b. Added with 2% of curing agent, silicon can still flow within 50 minutes to 1 hour, mold can be released in 2-3 hours. c. Added with 3% of curing agent, silicon can still flow within 28-30 minutes, mold can be released in 1.5-2 hours d. Added with 4% of curing agent, silicon can still flow within 10-15 minutes, mold can be released in 1-1.5 hours e. Curing agent reaction rate is related with weather and temperature. Under 25 degree, they can be added according to the instruction or at double amount in winter or under subzero temperature. (Note: Curing agent can not be added above the 4% maximum level and the normal proportion is 2%. If more than 4% is applied, the silicon will condensate too fast for normal usage). Provided that you arrange production according to our instruction, you are sure to manufacture first class products and maximize your profit this is not only the need of, but also our responsibility for and a satisfactory answer to our customers. We may not be the first, but we will try to be the best. What you need is what we pursue! We have free CD on operation instruction for you and provide silicone oil under your request. On-line follow-up technical service are available. Place of Origin: Guangdong China Brand Name: Hong Ye Silicone Rubber Model Number: HY912 HY916 silicone rubber Certifications: RoHS. MSDS. SGS. ISO.9001:2000 HS code: 39100000 Payment & Shipping Terms: Ocean freight/ Air lift Minimum Order Quantity: 200 Kilogram Supply Capacity: 3.5 ton/week Price: FOB shenzhen USD 7.8-15.6/kg Packaging Details: vacuumed thick PE bag inside and iron barrel outside 25kg/drum and 200kg/drum Delivery Time: within 3 days after payment confirmed in our bank. Payment Terms: L/C at sight, T/T, Western Union Any more information, please feel free to contact Ms. Angel. MSN:angelfly369 Skype: angelfly369 Email:hysa@szrl.net Tel: 0086-755-89948294 Mob:086-15273501823 Fax:086-755-89948030 Web:www(dot)szr(dot)net
|
|
» Chemicals/Rubber |
|
|
|
[Sell] Manual Molding Silicone Rubber |
|
|
Manual Molding Silicone Rubber is a flowable liquid with consistent quality in whatever color. Part A is a folwable liquid, part B is the curing agent. Prepare the original mold or product to copy, add 2%-3% curing agent to certain amount of silicon, and mix them evenly and they are ready for use. In 2-3 hours, a pair of silicone mold can be obtained with temperature and deformation resistance as well as low contraction ratio. The product is intended principally for manual molding and small quantity product duplication. 1.Applications of Manual Molding Silicone Rubber Manual Molding Silicone Rubber is mainly used for model design of : manual mold, PVC plastic molds, cement products, low melting point alloy molds, alloy toys, plastic toys, electronics, handicrafts, stationery, large-scale sculpture, reproduction of cultural relic, shoe sole molds, pad printing allocation, Electronic equipment anti-vibration, etc. 2. Brief Description/Features of Manual Molding Silicone Rubber a. Manual molding silicone rubber has the advantage of: Good elasticity Non-deformation Heat resistance Low shrinkage b. Model Codes of Manual Molding Silicone Rubber HY-528 is applicable to make molds of smaller products and the production will be 2-3 pieces. HY-540 , compared to other two types, for its moderate hardness and better quality & performance, its production will be 20-30 pieces. HY-570 is applicable to large size products duplications and Electronic equipment anti-vibration. c. Operation Instructions for Manual Molding Silicone Rubber RTV-2 Manual Molding Silicone Rubber is a flowable liquid, and the quality has nothing to do with the color. It consists of two component. Part A is a flowable liquid silicone rubber, part B is the curing agent. Firstly, after your previous work of dealing with the original model, take some liquid silicone rubber , add 2%-3% curing agent of the amount of silicon, and mix them evenly. Then after vacuum-pumping the mixture, you can pour it into the mold frame. The silicone mold will cured in 2-3 hours. Note: The time for vacuum-pumping should be less than 3—5 mins ,otherwise, once the silicone rubber has cross-link reaction during vacuumizing, it will not be operated. We offer free CD on how to operate and provide on-line follow-up technical training service for customers’ reference. 3. FAQ of manual molding silicone rubber How to prevent silicone manual molds getting sticky? a. The main reason for this problem is that you do not handle the products or original molds well, then you should deal with the original mold or products carefully before molding. Such as for the products with a complicated pattern or a unsmoothed surface, you should polish and clean the products after which it will be molded ,then spray the release agent. Normally, the release agent can be Vaseline , detergent. liquid wax Etc. In practical process, you can bush different release agent according to different material. b. The second reason is that the operator pour the silicone into the mold when the mixture is mixed evenly, then the finish silicone mold will not cure and dry entirely. Place of Origin: Guangdong China Brand Name: Hong Ye Silicone Rubber Model Number: HY528, HY540 manual mold silicone rubber Payment & Shipping Terms: Ocean freight/ Air lift Minimum Order Quantity: 200 Kilogram Price: FOB Shenzhen USD 3.9-5.2/kg Packaging Details: vacuumed thick PE bag inside and iron barrel outside 25kg/drum and 200kg/drum HS code: 39100000 Shelf life: one year at cool dry place Delivery Time: within 3 days after payment confirmed in our bank. Payment Terms: L/C at sight, T/T, Western Union Supply Ability: 8 Ton per Day Certifications: RoHS. MSDS. SGS. ISO.9001:2000 Further information on Manual Molding Silicone Rubber is available. Please feel free to contact sales manager Ms. Angel Yue. MSN:angelfly369 Skype: angelfly369 Email:hysa@szrl.net Tel: 0086-755-89948294 Mob: 086-15273501823 Fax:086-755-89948030
|
|
» Chemicals/Rubber |
|
|
|
[Sell] RTV-2 Silicone rubber for mold making |
|
|
moulds making RTV-2 Silicone rubber are generally named as two-part room temperature sulfurated silicone rubber, which features an exceptional fluidity and good operability. When mixed with 2-3% curing agent, they can still be operated within 30 minutes, but will be formed after 2-3 hours. It is a kind of white or red flowing liquid with general hardness of 22-50A°after curing. With resistance to deformation, high temperature, acid and alkali, and expansion, silicon flexible molds are used for mold duplication and delicate mold making for poli crafts, resin crafts lighting and candle crafts. 1. Applications of Silicone rubber for mold making RTV-2 Silicone rubber for mold making is primarily intended for: a. poly resin crafts, PU crafts, PU resin crafts ,gypsum crafts ,unsaturated resin crafts, b. lighting and candles crafts ,plastic toy , stationery gifts crafts industry, c. a large statue Buddha, statues Buddha, artifacts copied, d. furniture, furniture decorative materials, building decoration materials, large-scale cement mold, e. artificial fossils Factory, Europe component factory, f. simulation landscapes, animals and plants sculpture, sandstone crafts and so on. 2. Features of RTV-2 Silicone rubber for mold making description a. low viscosity, exceptional fluidity and easy operation b. resistance to deformation, high-temperature c. acid, alkali and ageing-resistance d. low shrinkage e. good tensile strength f. high reproduction times 3. operation tips of RTV-2 silicone rubber for mold making a. adding too much silicone oil will destroy the molecular of silicone rubber, which will cause a decrease of the tensile and tear strength of the mold and deformation may occur. b. remember to take the proper silicone rubber to make the mold for suitable products. for products with delicate and complicated patterns, you are expected to use soft silicone to make molds. While for products with easy and smooth patterns, you should choose hard silicone rubber. Plus: We have free CD on how to operate for our customers enclosed with product package. Place of Origin: Guangdong China Brand Name: Hong Ye Silicone Rubber Model Number : HY625 HY630 silicone rubber HS code: 39100000 Shelf life: one year at cool dry place Shipping Terms: Ocean freight/ Air lift Minimum Order Quantity: 200 Kilogram Price: FOB shenzhen USD 5.8~7.5 Packaging Details: vacuumed thick PE bag inside and iron barrel outside 25kg/drum and 200kg/drum Delivery Time: within 3 days after payment confirmed in our bank. Payment Terms: L/C at sight, T/T, Western Union Supply Ability: 8 Ton per Day Certifications: RoHS. MSDS. SGS. ISO.9001:2000 Any questions of RTV-2 silicone rubber for mold making, please feel free to contact Angel: MSN:angelfly369 Skype: angelfly369 Email:hysa@szrl.net Tel: 0086-755-89948294 Mob: 086-15273501823 Fax:086-755-89948030 Web:www(dot)szr(dot)net
|
|
» Chemicals/Rubber |
|
|
|
|
|
Pages: 1
|
|
|
|