|
|
|
Company Name: |
HongYe Silicone Rubber Manufacture |
| Contact Person: |
Ms Joy Chow |
| City: |
Shenzhen |
| Country: |
China
 |
| Local Time: |
|
| E-mail: |
Premium
Membership Required (Join Free Today) |
|
| Introduction: |
Shenzhen Hong Ye Jie Technology Co., Ltd. was established in 1998, is a Science and technology corporation which is engaged in production, R & D, and sales of silicone rubber. It sets up Hong Kong Hongye Ltd., Shenzhen Hongye silicone rubber Factory and other affiliated enterprises in 2005.
Our products including 36 series in hundreds of kinds of silicone products like silicone rubber, RTV-2 molding silicone rubber, silicone rubber for manual model design,shoe sole mold silicone rubber,silicon oil, pad printing silicone rubber, encapsulant and potting compound, silicone rubber for LED display, electronic thermolysis ointment, thermal conductivity silicone, special silicone rubber for CPU, silicone tube, silicone membrane, silicone sealant , liquid silicone rubber, addition cure RTV silicone rubber, HTV silicone rubber, solid silicone rubber, gross rubber, silicone rubber sheet, hot stamping silicone plates, hot stamping silicone roller,etc. These are currently been exported to Southeast Asia, Europe, the America and other 50 countries and regions.
To reach the internationally leading quality standard with competitive price is our permanent pursuit. We aim at supply high quality products to meet customers\\\\\\\' satisfaction. It is our solemn commitment that any of our products with quality problems will be replaced within 3 months after purchase. We offer on-site follow-up service for product demonstration, free customer service to solve technical issues, free mold opening technologies, free technical training on pad printing silicon usage and rubber head making. What you need is what we pursue. We are committed to back you up in producing first class products.
Welcome old and new customers and distributors anywhere around the world to negotiate for business and cooperations. Let\\\\\\\'s join hands and strive for mutual prosperity!
|
| Business Type: |
Exporter, Manufacturer |
| Areas of
Interest: |
1. Chemicals/Rubber
|
|
|
|
Offers
From This Member (3) |
|
|
|
[Sell] Poly-condensation silicones |
 |
|
. Poly-condensation silicones usages
Poly-condensation silicones is primarily intended for mold making of gypsum, concrete, poly resin ,PU resin, unsaturated resin crafts, lighting and candles crafts , plastic toys , stationery gifts crafts industry, large statue, Buddha, relievo furniture, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils Factory, European buildings, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.
2. Poly-condensation silicones features:
1. Poly-condensation silicones with Good characteristics of easy-operation
2. Poly-condensation silicones with Light viscosity and good flowability
3. Poly-condensation silicones with Low shrinkage
4. Poly-condensation silicones with Excellent tensile and tear strength
5. Poly-condensation silicones with Favorable hardness
6. Poly-condensation silicones with High temperature resistance, acid and alkali-resistance and ageing resistance
7. Poly-condensation silicones with High duplication times
3. Some pictures of Poly-condensation silicones
4. Poly-condensation silicones discription
Poly-condensation silicones is a kind of flowable liquid silicone, the quality has nothing to do with the color. It consists of two components. Part A is a flowable liquid silicone rubber, part B is the curing agent. Firstly, after your previous work of dealing with the original model, take some liquid silicone rubber , add 2%-3% curing agent of the amount of silicon, and mix them evenly. Then after vacuum-pumping the mixture, you can pour it into the mold frame. The silicone mold will cured in 2-4 hours.
And more curing agent is needed; contrarily, if molds requiring slower drying and demould, less curing agent is needed.
5. Poly-condensation silicones frequently asked question
Why does the silicone rubber molds appeared striately and unsmoothly?
It is because the appearance of the product or the model itself is not perfect, and it has not been polished before the further operation. So when you make silicon molds, firstly you should polish the product, spray the mold spray evenly on the product. In this case, the problem can be avoided.
If you are interested in this kind Poly-condensation silicones , pls feel free to contact Ms Joy Chow
Tel: 86-755-89212380
Mob: 86-13554758940/ 18938867578
Fax: 86-755-89948030
Hyk at szrl dot net
www dot szrl dot net
|
|
| » Chemicals/Rubber |
|
|
|
[Sell] 25 shore A RTV silicone rubber |
|
|
Applications of 25 shore A RTV silicone rubber
25 shore A RTV silicone rubber is intended for statue mold making ,candles.
25 shore A RTV silicone rubber is application for plastic toys, relieve furniture.
25 shore A RTV silicone rubber is used for architectural decoration, funiture decorative.
25 shore A RTV silicone rubber is application for sculpture, art crafts mold making and so on.
Features of 25 shore A RTV silicone rubber
25 shore A RTV silicone rubber for statue mold making is flowing liquid with general hardness of 25A° after curing with features:
1. resistance to deformation and high-temperature, acid-alkali and expansion
2. good tensile strength, tear strength and elongation
3. high reproduction times
Datasheet of 25 shore A RTV silicone rubber
Model
Appearance
Viscosity (cs)
Hardness (Ao)
Tensile Strength (kgf/c)
Tear Strength (kgf/)
Elongation (%)
Mixing ratio(%)
Operating Time(H)
Curing Time(H)
625
White
17000~19000
25
≥35
≥25
≥500
5%
0.5
2~4
Any more information pls abt 25 shore A RTV silicone rubber pls feel free to ask Ms.Joy
Tel: 86-755-89212380
Mob: 86-13554758940/ 18938867578
Fax: 86-755-89948030
Hyk at szrl dot net
www dot szrl dot net |
|
| » Chemicals/Rubber |
|
|
|
[Sell] Two parts rtv silicone for moulds |
|
|
Two parts rtv silicone for moulds
Applications of Two parts rtv silicone for moulds
Two parts rtv silicone for moulds is intended for statue mold making ,candles.
Two parts rtv silicone for moulds is application for plastic toys, relieve furniture.
Two parts rtv silicone for moulds is used for architectural decoration, funiture decorative.
Two parts rtv silicone for moulds is application for sculpture, art crafts mold making and so on.
Features of Two parts rtv silicone for moulds
Two parts rtv silicone for moulds is flowing liquid with general hardness of 22-50A° after curing with features:
1. resistance to deformation and high-temperature, acid-alkali and expansion
2. good tensile strength, tear strength and elongation
3. high reproduction times
Datasheet of Two parts rtv silicone for moulds
Model
Appearance
Viscosity (cs)
Hardness (Ao)
Tensile Strength (kgf/c)
Tear Strength (kgf/)
Elongation (%)
Mixing ratio(%)
Operating Time(H)
Curing Time(H)
628
White
14000~16000
25~28
≥35
≥25
≥500
2~3
0.5
2~4
Any more information of Two parts rtv silicone for moulds , please feel free to contact Joy
Tel: 86-755-89212380
Mob: 86-13554758940/ 18938867578
Fax: 86-755-89948030
Hyk at szrl dot net
www dot szrl dot net |
|
| » Chemicals/Rubber |
|
|
|
|
|
Pages: 1
|
|
|
|
|
