|
|
|
Offer
From Non Premium Member |
|
|
|
Type: |
Sell |
| Subject: |
RTV 2 silicone rubber make molds for gypsum casting |
| Description: |
FEATURES of RTV 2 silicone rubber:
1.Two-part of RTV 2 silicone rubber flowable liquid silicon and curing agent.
2.RTV 2 silicone rubber Cures at room temperature within 5-46hours.
3.RTV 2 silicone rubber has An exceptional fluidity and good operability.
4.RTV 2 silicone rubber has good Temperature and deformation resistance as well as low shrinkage.
5.RTV 2 silicone rubber has High duplication times.
Model of RTV 2 silicone rubber:
RTV 2 silicone rubber RTV-630#:
Usage: Silicon rubber for PU/poly resin products,plaster,candles, gypsums crafts, cement products, concrete/architectural products,statuary, casting molds making, etc.
Model 630#
Appearance white
Mixing proportion of curing agent (%) 5%
Operating time (mins 25 0C ) 20-40
Curing time(hours 25 0C) 3-5
Hardness (A°) 30±2
Density ( g/cm 3 ) 1.08
Viscosity (Mpas -25 0C) 21000~23000
Tensile-strength(kgf /cm2 ) ≥40
Tear-strength (kgf /cm ) ≥30
Elongation-break(%) ≥ 450
Retractility(%) ≤0.3
Operations for RTV 2 silicone rubber:
Step One to use RTV 2 silicone rubber: Take 100g of part A and add 2g of part B and mix the silicon rubber and the curing agent evenly.
Step Two to use RTV 2 silicone rubber: vacuum pumping
Without exception, this takes less than 10 minutes. Otherwise, it will cause cross linking reaction, and no more further steps will be available.
Step Three to use RTV 2 silicone rubber: Brushing cast & Perfusion Molding operation.
Frequently asked questions of RTV-2 silicone rubber for mold making
Why does the silicone rubber mold have few molding times?
The silicone rubber mold has few molding times is due to follwoing reasons: adding too much silicone oil which will destroy the molecular of silicone rubber; making the mold for small and fine detailed products with higher hardness silicone rubber which is easy to break; making the mold for large products with soft silicone rubber which will reduce the tensile and tear strength of the mold, and the mold will have deformation. Thus, we should take the proper silicone rubber to make the mold for suitable products.
Any further information required, pls feel free to contact Mr Chris
Tel: 0086-755-89948019
Fax: 0086-755-89948030
Mobile：0086-18938867508
E-mail: hyi(at)szrl(dot)net
|
| Placement Date: |
Sep 25, 2012 |
| Expiration Date: |
Sep 25, 2013 |
|
|
|
|
|
|
Company Name: |
Shenzhen Hong Ye Jie Technology Co.,Ltd |
| Contact Person: |
Chris Yao |
| City: |
Shenzhen |
| Country: |
China
 |
| Local Time: |
|
| E-mail: |
Premium
Membership Required (Join Free Today) |
|
| Introduction: |
We are manufacturer specializing in molding silicone rubber, mold duplicating rubber for resin craft makers, special silicon for manual molding, shoe mold rubber, pad printing silicone, encapsulates and potting compound, addition cure liquid silicone, baby nipple silicone rubber, life casting, food grade silicone rubber, trademark silicone rubber, HTV silicone rubber, lead-zinc alloy crafts silicone rubber, hot stamping silicone plate, hot stamping silicone roller, gross rubber, RTV-2 silicone rubber, silicone molds, silicone products, etc.
If you have any questions pls feel free to contact Chris
Any further information required, pls feel free to contact Mr Chris
Tel: 0086-755-89948019
Fax: 0086-755-89948030
Mobile：0086-18938867508
E-mail: hyi(at)szrl(dot)net
|
| Business Type: |
Exporter |
| Areas of Interest: |
1. Chemicals/Rubber
|
|
