|
|
Offer
From Non Premium Member |
|
|
|
Type: |
Sell |
Subject: |
High Pressure Hydraulic Hose |
Description: |
High pressure hydraulic hose is an important part of most hydraulic machines and other equipment, which is used to transmit working fluids. High pressure hoses and other channels carry the largest compressive load of all the other components of the hydraulic machines. Their durability determines the service life of machinery, regardless of its type. This feature calls for the right choice of hoses: they should be of the highest quality and most guaranteed lifetime. High pressure hydraulic hose is special designed to move the working fluid in the hydraulic machines and mechanisms. Hose runs on the principle of flexible pipe for transporting fluids under high pressure. Applications: Hydraulic high pressure hoses are suitable for the transportation of hydraulic fluids based on mineral and oils, emulsions, water-glycol fluids and lubricants based on vegetable and mineral oils. But they are not suitable for transporting hydraulic fluids based on chlorinated hydrocarbons, and phosphate esters. Therefore they are used in various industries: construction and road equipment, lifting equipment, timber and agricultural machinery, industrial equipment, etc. The company draws attention to its customers a wide range of hydraulic hoses for high pressure. Here you can select the high pressure hoses of all possible types, sizes and purposes. We present the hydraulic hoses fully certified to meet international standards of GOST, DIN, EN, ISO, and SAE. High pressure hose 1SN DIN EN 853 and 2SN have the same tube, cover layer and operating temperature. 1SN DIN EN 853 has one layer high tensile steel wire braid reinforcement, and 2SN DIN EN 853 has two layers high tensile steel wire braid reinforcement. They are all wire braided high pressure hoses. Tube: oil resistant synthetic rubber Cover: Synthetic rubber, abrasion resistant Operating temperature: -40 ? C to +100 ? C (+120 ? C max.) High pressure hose 1SN specifications Dash size Internal D Outside D W.P. B. Bending radius Weight mm. inch mm. mm. bar bar mm. kg / m 6 1/4 " 6.4 4.13 225 900 100 0.226 8 5/16 " 8.0 15.0 215 850 115 0.265 10 3/8 " 9.5 4.17 180 720 130 0.335 12 1/2" 7.12 6.20 160 640 180 0.415 16 5/8 " 16.0 7.23 130 520 200 0.496 19 3/4" 19.0 7.27 105 420 240 0.638 25 1 " 4.25 35.6 88 350 300 0.980 31 1-1 / 4 " 8.31 43.5 63 250 420 1.207 38 1-1 ;/ 2 ;" 38.1 50.6 50 200 500 1.560 51 2 " 50.8 64 40 160 630 2.108 High pressure hose 2SN DIN EN 853 specifications Dash Size Internal D Outside D W.P. B.P. Bending radius Weight mm. inch mm. mm. bar bar mm. kg/m 6 1/4" 6.4 15.0 400 1600 100 0.376 8 5/16" 8.0 6.16 350 1400 115 0.412 10 3/8" 9.5 19.0 330 1320 130 0.519 12 1/2" 7.12 2.22 275 1100 180 0.630 16 5/8" 16.0 4.25 250 1000 200 0.780 19 3/4" 19.0 3.29 215 850 240 0.959 25 1" 4.25 38.1 165 650 300 1.409 31 1-1/4" 8.31 48.3 125 500 420 2.059 38 1-1/2" 38.1 54.6 90 360 500 2.385 51 2" 50.8 67.3 80 320 630 3.050 63 2-1/2" 63 81.0 70 280 760 4.190 76 3? 75.5 93.0 35 140 900 4.500 High pressure hose 4SP DIN EN 856 and 4SH have the same construction Tube: oil resistant synthetic rubber Reinforcement: four high tensile steel wire helix Cover: Synthetic rubber, abrasion resistant Operating temperature:-40 ? C to +100 ? C (+120 ? C max.) High pressure hose 4SP specifications Dash Size Internal D Outside D W.P. B.P. Bending radius Weight mm. inch mm. mm. bar bar mm. kg/ m 6 1/4" 6.4 8.17 450 1800 150 0.615 10 3/8" 9.5 4.21 445 1780 180 0.850 12 1/2" 7.12 6.24 415 1660 230 0.935 16 5/8" 16.0 5.28 350 1400 250 1.146 19 3/4" 19.0 32.1 350 1400 300 1.554 25 1" 4.25 39.7 280 1120 340 2.033 31 1-1/4" 8.31 50.8 210 840 460 3.176 38 1-1/2" 38.1 57.1 172 688 560 3,657 51 2" 50.8 70.6 172 688 660 5.137 High pressure hose 4SH DIN EN 856 specifications Dash Size Internal D Outside D W.P. B.P. Bending radius Weight mm. inch mm. mm. bar bar mm. kg/m 19 3/4" 19.0 32.2 420 1680 280 1.566 25 1" 4.25 38.7 380 1520 340 2.087 31 1-1/4" 8.31 |
Placement Date: |
Jul 05, 2013 |
Expiration Date: |
Jul 05, 2014 |
|
|
|
|
|
|
Company Name: |
Kachet High Pressure Hose Co., Ltd. |
Contact Person: |
Jane |
City: |
Hengshui |
Country: |
China
|
Local Time: |
|
E-mail: |
Premium
Membership Required (Join Free Today) |
|
Introduction: |
It was established in the year of 1993. It covers an area of 40,000 square meters and the construction area of more than 25,000 square meters with the total investment of RMB 30 million. By virtue of the quality of scientific management, advanced technology, excellent equipment, and eternal consciousness, it has developed into a leader in the domestic industry with a number of high-pressure hose manufacturers. |
Business Type: |
Exporter, Manufacturer |
Areas of Interest: |
1. Chemicals/Rubber
|
|