|
|
|
Offer
From Non Premium Member |
|
|
|
Type: |
Sell |
| Subject: |
Pad Printing Silicone Rubber |
| Description: |
Pad Printing Silicone Rubber
Usage for Pad Printing silicone rubber:
Pad printing silicon rubber is mainly applicable to the printing of irregular patterns on plastics toys, electroplating products, electronic toys, trademarks, artwork gifts, and stationery, etc.
Features of Pad Printing silicone rubber:
The silicon pad is a carrier which transfer printing the patterns on the steel plate onto the toy products' surface. Pad Printing silicone rubber with the advantages of abrasion resistance, high temperature resistance, good printing effect, etc. , which made of top-quality raw material due to adding American Dupont Teflon high-temperature resistance new material, is processed through high-temperature machining.
Instruction for Pad Printing silicone rubber
1． Firstly,clean the mold with detergent, and dry up the mold by a piece of cloth or an air gun and then coat the mold with a layer of release agent.
2. The normal proportion between the pad printing silicon and the silicone oil depends on the requirements of the customers. If pattern with big area to be printed, a soft silicon pad is needed and the amount of silicone oil is increased. Contrarily, if a silicon pad with high hardness is needed, the silicone oil should be added less or not . The hardness of general pad printing silicone rubber is approximate of 15A°~-25 A°.
3. General mixing proportion is as follows: add 30g silicone oil into 100g silicon with the hardness of the silicon pad being 20A°, which is suitable for the pad printing for alloy car and products with small patterns and contact areas. If a big pressure contact surface or a soft silicon pad is needed, the mixing proportion between the silicon and the silicone oil can be 100:30-100:50.
4. The amount of the curing agent and the chemical reaction with the silicon is as follows: mix 100g silicon and 50g silicone oil sufficiently and evenly, then add the curing agent which is 2%-3% of the total weight of the silicon and the silicone oil, mixing for 2-3 minutes, and then deair to remove the air bubbles . The time of deairring generally does not exceed 10 minutes. If the deairing time is too long,it may cause fast curing of the silicon and impact the quality of silicon.
Payment Terms:L/C, T/T
Port: Shenzhen
Minimum order quantity:200kg
Supply ability:8 tons/day
Deliverly Time:within 3 days after getting bank receipt
Package:25kg/drum and 200kg/drum
If you need more information about RTV silicon rubber for manual mold making, please feel free to advise about your idea, then we will follow it to recommend the most suitable silicon rubber for your products. Looking forward to hearing from you
website: www (dot) szrl (dot) net
E-mail: hyw(at)szrl(dot)net
Helenliao888(at)hotmail(dot)com
contact: Helen
Telephone:0086 755 89948019
0086 15889404068
|
| Placement Date: |
Nov 09, 2011 |
| Expiration Date: |
Nov 07, 2016 |
|
|
|
|
|
|
Company Name: |
HONG YE JIE TECHNOLOGY CO.TLD |
| Contact Person: |
helenliao |
| City: |
Shenzhen |
| Country: |
China
 |
| Local Time: |
|
| E-mail: |
Premium
Membership Required (Join Free Today) |
|
| Introduction: |
Hong Ye Jie Technology Co.Ltd was established in 1998, is a Science and technology corporation which is engaged in R & D ,production, and sales of silicon rubber. We also established the Hong Kong Hongye LTD, Shenzhen Hongye Jie rubber Factory and other affiliated enterprises in 2005.
Our products includes 36 series in hundreds kinds of silicon products like Silicone rubber, silicone material, silicone product, RTV-2 silicone rubber, HTV-2 silicone rubber, mold making silicone rubber, pad printing silicone rubber, manual mold silicone rubber, condensation silicone rubber, casting silicone rubber, brushing silicone rubber, pouring silicone, room temperature silicone rubber，trademark silicone rubber, gross silicone rubber
|
| Business Type: |
Manufacturer |
| Areas of Interest: |
1. Chemicals/Plastics
2. Chemicals/Rubber
|
|
