|
|
|
|
|
|
|
[Sell]
Manufacturing line for a-S silicon PV solar cell |
 |
|
Manufacturing line for a-S silicon PV solar cell
(http://www.pvd-metallizer.com)
Manufacturing line for amorphous silicon PV solar cell is mainly applicable for the production of large-sized photovoltaic sheet glass. Taking common sheet glass as substrate goes through CVD or PVD coating process to make transparent conductive film coating, through PECVD to realize various amorphous silicon films, by sputtering coating to achieve aluminum film or AZO electrode. By laser technology to engrave on the coated films and after that with checking, examination and packing to accomplish the manufacturing process of large-area cell components. The total manufacturing is within 10 processes. It is more easy and simple in manufacturing process to make crystal silicon cell with advantages of higher utility of silicon material and lower production cost compared with that of crystal silicon cell production.
Our company as per market demands and customer requirements, has developed consecutive sputtering coating line of diverse models applicable for sputtering coating back and front electrodes on the plate of amorphous silicon solar photovoltaic cells by DC & MF sputtering technology and with auto control system OA2000 of his own intellectual property right. It is available for bulk production by good comparison with that made by western countries.
Coupled with this sputtering coating line, PECVD sputter coaters, glass edge grinding machine, glass washing machine, heat treatment device and laser cutting machines and related coating technology, etc are also supplied by our company. Our company offers all the technical information and technical support for whole manufacturing process of amorphous silicon solar photovoltaic cells.
China Guangdong PVD Metallizer Co.
Alex Li
Tel: +86 758 2279559
Fax:+86 758 2279559
Mobile:+86 13929890858
Email: vacuumsale@hotmail.com
MSN: vacuumsale@hotmail.com
Skype: vacuum-metallizer
Website: http://www.pvd-metallizer.com
|
|
» Posted by: China Guangdong PVD Metallizer Co. [China]  |
|
|
|
|
|
[Sell]
Sputtering coating line for low-e glass |
|
|
Sputtering coating line for low-e glass
(http://www.pvd-metallizer.com)
Adopting the principle of magnetron sputtering E-discharge, this Vacuum Coating Production Line can coat metallic film or compound films on the surface of large-sized glass, such as curtain wall glass or architectural glass, forming the glass with characteristics of sunshine shelter, temperature-keeping, energy-saving, low emission and decoration, etc. that has been extensively used high-rank architecture, act wall and room decoration, etc.
The production line is composed of glass-loading tipping rack, glass washing machine, attendant chamber, pre-pumping chamber, buffer chamber, sputtering coating chamber, output buffer chamber, output pre-pumping chamber, output washing machine, on-line inspection, un-loading tipping rack and control board system.
Work principle: This machine can produce reflective and lower irradiant architectural glass or act wall glass. By the principle of sputtering technique under magnetic field, some film is coated on the surface of large plate glass such as single metal film, alloyed film, metal compound film. The coated glass has function or effect of sunlight prevention, heating preservation, energy saving and decoration. By magnetron sputtering reactive coating technique, it can also coat or metallize various color films or iridescent film on glass.
By reactive coating technology and change of different target materials, the machine can make glass of any color such as silver, dark brown, sapphire, gilded, etc. It can also produce the imitation of ancient copper glass and of golden glass.
China Guangdong PVD Metallizer Co.
Alex Li
Tel: +86 758 2279559
Fax:+86 758 2279559
Mobile:+86 13929890858
Email: vacuumsale@hotmail.com
MSN: vacuumsale@hotmail.com
Skype: vacuum-metallizer
Website: http://www.pvd-metallizer.com
|
|
| » Posted by: China Guangdong PVD Metallizer Co. [China] |
|
|
|
|
|
[Sell]
Thermal evaporation metallizer |
|
|
Thermal evaporation metallizer
(http://www.pvd-metallizer.com)
Double Door Vertical Type Thermal Evaporation metallizer is operated by the principle of thermal evaporation by resistance heating that can be used for coating metallic films and gold-imitative films on the pre-treated plastics, ceramics and others in order to obtain bright and good-looking results with lower cost. This machine is extensively used in the fields of Arts & Crafts industries, decoration or upholstery, toy-making, etc.
Its double doors structure enables the highly efficiency of substrates feeding-discharge and coating simultaneously.
The machine equipped with high-vacuum diffusion pumps, Roots pump, sliding valve pumps or rotary pumps composed of vacuum group, is the customers superior choice for vacuum metallizers of decoration purposes.
China Guangdong PVD Metallizer Co.
Alex Li
Tel: +86 758 2279559
Fax:+86 758 2279559
Mobile:+86 13929890858
Email: vacuumsale@hotmail.com
MSN: vacuumsale@hotmail.com
Skype: vacuum-metallizer
Website: http://www.pvd-metallizer.com
Address: No.1 duanzhou road, Zhaoqing, China
|
|
| » Posted by: China Guangdong PVD Metallizer Co. [China] |
|
|
|
|
|
[Sell]
Steel Fencing Gates |
|
|
Steel fencing gates make the important parts for steel fencing system and it offers the following benefits:
Reduction of manual handling issues in operating large gates
Superior service life of bearing hinges
Anti tamper hardware used to deter interference with the gate
Competitive pricing
Cost effective design
Superior strength due to the double bottom rail design
Gate Systems
Gate Systems utilize a tube frame design with steel, aluminum or stainless steel infill panels and louvers. We supply a variety of panel styles, including numerous sizes of square or rectangular mesh patterns, or louvers. The tube frame can also be manufactured in steel, aluminum or stainless steel.
Integrated gate systems are available in swing gates, v-wheel roller gates or monorail track cantilever gates. These gate systems are designed to work efficiently and trouble-free in virtually any setting.
Standard gate systems are available in many sizes and in a variety of styles. Custom fabrication services are available to complete even the most complex metal structures.
Fence gate systems are manufactured using an exclusive electro-forged welding process that provides complete penetration of the cross member, and most have a hot-dip galvanized finish with a polyester powder coating that provides the best corrosion protection available.
Our fencing gate systems have the following features:
Have greater rigidity
Eliminate most maintenance
Handle exposure to the elements without crazing or fading
Available in 15 color choices
|
|
| » Posted by: PuSheng Steel Fencing Industrial Co. [China] |
|
|
|
|
|
[Sell]
Palisade Fencing |
|
|
Steel palisade fencing for security makes the most popular fencing for locations requiring security and vandal resistance. Flexible build system allows for contoured terrain to be fenced without detailed pre-planning.
'D' Section Palisade
'D' Section refers to the shape of the vertical pale profile, which is best suited to sites requiring a boundary with forbidding appearance and general damage resistance.
'W' Section Palisade
The 'W' Section profile gives extra protection over 'D' Section to the pale fixing on the attack face of the fence.
|
|
| » Posted by: PuSheng Steel Fencing Industrial Co. [China] |
|
|
|
|
|
[Sell]
Low cost used TADANO GT-550E crane truck |
|
|
MODEL : GT-550E
Original place: Japan
YEAR:2005
CAPACITY : 55 TON at 3.0m
ENGINE:Nissan
Model..........NISSAN....PF6
CHASSISI: Nissan
Boom: 5-section,11.1m-42.0m
Extension speed: 30.9 m in 123 s
Jib Length: 9.0m and 14.6m
OUTRIGGERS
EXTENDED width
Fully.........6.800m
Middle....4.600m
Minimum....2.390m
Hydraulic Jack: 5
OVERALL LENGTH:13.48M
OVERALL WIDTH:2.82M
OVERALL HEIGHT:3.68M
Max.travelling speed: 83km/h
Gradeability:53% |
|
| » Posted by: Shanghai EnHua Construction Machinery Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Heat fusion marking removal machine RR-508 |
|
|
Technical Parameter:
1.Engine:10.5-12.5HP imported fourstroke cooling petrol engine
2.Operating method: the handle bar is equipped with petcock control switch, and the frame is equipped with burnishing head landing control bar and burnishing force.
3.Adjusting range of burnishing force:active trimming knife strong, moderate, and weak stepless control
4.Rubber tire: cast iron wheel nave, made of antifriction gelatin, and the rear wheel is equipped with dual gun single stack axis strengthening wheel
5.Burnishing head: made of three independently revolving burnishing head, and the head is inlaid with imported super-antifriction hard alloy, and width is 180mm
6.serving life of burnishing head: 20,000 to 30,000mm
7.Dimension and weight:1150*720*890mm
8.Net weight:162kg
|
|
| » Posted by: Youline Traffic Facilities Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Primer (sprayable) machine DQ-100 |
|
|
Technical Parameter:
1.power:Honda 5.5HP gasoline engine
2.The biggest pressure sprayed:0.5Mpa
3.Width of spray:100-450mm
4.Safty presssure control:keep the pressure stable and setup unilateral ball valve
5.Moving speed:65-70m/min
6.Size aand weight:800*400*850mm
7.net weight:50kg
|
|
| » Posted by: Youline Traffic Facilities Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Cold (sprayable) truck CZ-406 |
|
|
Technical Parameter:
1.power: 13HP HONDA gasonline engine
2.the maximum load output flow :18L/min
3.the highest output dope pressure :3000PSI (21Mpa)
4.the normal work pressure:10-18Mpa
5.width of the spray :100-300mm
6.thickness of the spray :0.2-0.4mm
7.the two guns can be used at th same time
8.volume :1300*1300*1200mm
9 net weight:600kg
This machine is the high-pressure and equal flow-airless spray engine,it utillzes gasoline engine to
drive plunger pump to force dope form high pressure,the sprayed index marks are common in
thickness and angles,the lines are clear,because of the direction bar in the spraying gun,the line
can be adjusted into certain width correcting and conveniently,equipped with the computer line
controller,the space between dotted lines can be changed according to the projet requirements.
|
|
| » Posted by: Youline Traffic Facilities Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Nickel Welding Wire |
|
|
Nickel and nickel alloy welding wire are available in different materials including ERNi-C1(Ni99), ERNiFe-C1(Ni55) and Ni60.
Common size for Nickel Welding Wire:
Core wire in coil size: 2.0mm, 2.5mm, 3.2mm, 4.0mm, 5.0mm, 6.0mm
Core wire in fixed length: size: 2.0mm--6.0mm length: 350mm or custom sizes
TIG wire in 1000mm length
MIG wire 1.2mm,1.6mm in standard spool & weight
|
|
| » Posted by: TigSure Welding Wire Factory [China] |
|
|
|
|
|
[Sell]
flux core welding wire |
|
|
Flux-cored welding wire is made out of thin strip rolled into round or shaped steel tubing, with the filling of powder of certain extent, then into seam flux cored welding wire through drawing, or seamless flux-cored welding wire with tubes filling completely with powders.
Flux cored welding wire can be with seams or without seams according to manufacture procedures. Welding with this wire has good welding deposition efficiency, good adaptability of steel and wide range of uses. This wire is mainly used for carbon dioxide gas shielded welding, submerged arc and electroslag welding. The powder flux cored wire electrode composition contains slag, building gas and solid components of the flux-cored wire arc welding without shielding gas.
The self-shielded flux-cored wire is suitable for large welded structure and the construction works. |
|
| » Posted by: TigSure Welding Wire Factory [China] |
|
|
|
|
|
[Sell]
mig welding wire |
|
|
Mig welding wire can be aluminum welding wire, stainless steel welding wire or other alloy wire specially for mig welding processes.
Solid wire MIG welding:
Metal inert gas (MIG) welding was first patented in the USA in 1949 for welding aluminium. The arc and weld pool formed using a bare wire electrode was protected by helium gas, readily available at that time. From about 1952 the process became popular in the UK for welding aluminium using argon as the shielding gas, and for carbon steels using CO 2 . CO 2 and argon-CO 2 mixtures are known as metal active gas (MAG) processes. MIG is an attractive alternative to MMA, offering high deposition rates and high productivity.
Process characteristics
MIG is similar to MMA in that heat for welding is produced by forming an arc between a metal electrode and the workpiece; the electrode melts to form the weld bead. The main differences are that the metal electrode is a small diameter wire fed from a spool and an externally supplied shielding gas is necessary. As the wire is continuously fed, the process is often referred to as semi-automatic welding.
Shielding gas
In addition to general shielding of the arc and the weld pool, the shielding gas performs a number of important functions:
forms the arc plasma
stabilises the arc roots on the material surface
ensures smooth transfer of molten droplets from the wire to the weld pool
Thus, the shielding gas will have a substantial effect on the stability of the arc and metal transfer and the behaviour of the weld pool, in particular, its penetration. General purpose shielding gases for MIG welding are mixtures of argon, oxygen and CO 2 , and special gas mixtures may contain helium. The gases which are normally used for the various materials are:
|
|
| » Posted by: TigSure Welding Wire Factory [China] |
|
|
|
|
|
[Sell]
ZYB Multifunction oil purifier characteristic |
|
|
Function
This applies to mining equipment, metallurgy, machinery, chemicals, plastics, instrumentation, transportation, oil drilling, construction ceramics, precision die-casting industry and other machinery used oil, turbine oil, hydraulic oil, compressor oil, the load of gear oil, frozen oil, steel rolling oil, quenching oil, light oil, and a variety of fast quenching oil. 5 apply to 1500, high school sports low-viscosity oil for purification. The special equipment used for the purification compressor oil, oil pollution contains a large number of water-soluble acid, histidine, carbon, sand and dust, water, sometimes up to 70% by renewable purification equipment to deal with after separation Out of the water, such as water-soluble oil in acid grave when he was separated from the water, for the color white. Oil-containing acid were severely separated for the dark blue water, oil was a serious alkali separated water, for the color white. Snowflake's water, there are many floating objects. The present oil purification equipment is Purification of the physical machine without having to use other chemicals.
Characteristic
1) specialized machine design, it is traditional with the modern vacuum filtration separation of a combination of renewable sources of waste oil treatment plant into one. Oil can be an effective way to remove the powder, particle impurities, emulsified water, free water.
2) tank-wide stainless steel piping material can be used to remove internal corrosion process can work continuously for a long time.
3) the device can handle low viscosity and high viscosity of a variety of lubricants, which is common Transmission filter device could not be completed. Every time the cost of processing low-cost, to be no more than 10% of the oil deal.
4) can handle low viscosity and high viscosity of a variety of lubricants, with no special circumstances, the only waste oil and electricity, can be carried out at any time to deal with waste oil, simple, easy maintenance, resulting in lower maintenance costs , Summer power consumption for the whole 50% to 60% of the winter.
5) the purification equipment to deal with all kinds of oil, without the use of other chemicals, machinery purely physical purification treatment, to ensure a clean oil products after the original quality of performance does not change.
6) air-cooled condensing, separating waste oil from water vapor in 2 seconds into a condensate water, emit up to address the waste water cooling water.
7) this device is also suitable for high-viscosity oil, oil water anomaly
8) the device can run the lines contained, but also the use of mobile.
Contact: Melody
Chongqing Zhongke oil purifier manufacture Co., Ltd
Email: melody080926@126.com
oilpurifiermelody@126.com
Hotmail: melody080926@hotmail.com
Tel: 0086-023-66600690
Fax: 0086-023-68174166
http://www.cncpck.com/melody080926/
http://oilpurifierzk.ec51.com
http://melody080926.tradeprince.com/
http://zhongkeoilpurifier.itm.com.cn
|
|
| » Posted by: Chongqing Zhongke oil purifier manufacture Co., Ltd [China] |
|
|
|
|
|
[Sell]
YFL Lubrication oil separator and purifier system |
|
|
Application
It mainly applys to separator all kinds of light oil, high viscosity’s lubrication oil to restore the treated oil color. Especially the manufacture of the bearing and gear could purifier the coal oil for air which contains all kinds of lubrication oil: such as, anti-rust oil, cut oil etc, this equipment could be separatored efficiently the water, mechanical impurity, precipitate and causticity from the waste oil. (Separatored rate 100%)
※ Feature：
1. This equipment combination the absorption separator, rotatonal flow separator, electrolyze separator, neutrality separator, deep decolor, mechanical purification to be one.
2. It has following features: such as low cost of the purification, easy operation, the excellent effective of decolor and so on. The color difference is keep within 1%.
Contact: Melody
Chongqing Zhongke oil purifier manufacture Co., Ltd
Email: melody080926@126.com
oilpurifiermelody@126.com
Hotmail: melody080926@hotmail.com
Tel: 0086-023-66600690
Fax: 0086-023-68174166
http://www.cncpck.com/melody080926/
http://oilpurifierzk.ec51.com
http://melody080926.tradeprince.com/
http://zhongkeoilpurifier.itm.com.cn
|
|
| » Posted by: Chongqing Zhongke oil purifier manufacture Co., Ltd [China] |
|
|
|
|
|
[Sell]
Sell griinding mill,milling machine,mills |
|
|
http://www.zenithcrusher.com
lilian@zenithdream.com
Grinding mill is a leading world level industrial mill.grinding mill is designed by our engineers and technical workers, basing on many years’ industrial mill research, and adopting world leading powder processing technology. Grinding mill adopts numbers of national patent of mill, such as trapezium working surface, flexible connection, roll linked pressure boost, etc. grinding mill has completely overcome traditional mill’s defect in application, capacity, fineness, energy consumption, service life, etc. And grinding mill is the ideal substitute of traditional mill, such as Raymond mill, high pressure suspension mill, ball mill, etc. Nowadays, the grinding mill has widely used in metallurgy industry, electric power industrial, chemical, building, steel industry, coal industry, etc. And it has achieved large economic benefits and social benefits.
Application
Grinding mill is widely used in many industrial, such as building, chemical, chemical fertilizer, metallurgy, mining, nonmetal, abrasive, bearing materials, ceramic, steel, thermal power, bricks & tiles, coal industry, etc. grinding mill can grind these materials which are 9 or less on the Mohs scale, and moisture is below 6%., and grinding mill should be nonexplosive and nonflamable mining materials. The final size can be adjusted from 30 to 400 meshes easily. There are thousands materials our machine can grind. The typical materials are cement (raw meal and cement clinker), quartz, feldspar, calcite, gypsum, limestone, dolomite, graphite, fluorite, aedelforsite, phosphate ore, fused calciummagnesium phosphate, carbamide, electrolytic manganese metal, ferromanganese, coal, gangue, slag, zirconium, steatite, granite, orthoclase, marble, barytes, ceramic
|
|
| » Posted by: Shanghai Zenith Electric Power Equipment Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Sell sand washing machine,sand washer |
|
|
http://www.zenithcrusher.com
lilian@zenithdream.com
The sand washing machine is used to remove the dust in sand. The mining machine aims at improving the quality of sand. The materials include the required gravel in building-site, gravel factories, hydropower station and concrete dam site, post and electric pole factory, casting-70 sand, glass factory’s quartz sand and refilling pressure sand.Sand washer (sand washing machine) is widely used for cleaning materials in the following industries: quarry, minerals, building materials, transportation, chemical industry, water conservancy and hydropower, cement mixture station and so on.
Features:
1) Simple structure
2) Water saving
3) No pollution
4) Easy to maintain
5) Good durability
|
|
| » Posted by: Shanghai Zenith Electric Power Equipment Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Security Fence System |
|
|
Features:
Anti-climbable;
Virtually impenetrable;
High security;
Maintenance free;
Unobtrusive appearance;
High deterrent;
Easy installation.
Affordable and durable high security fence system guaranteed.
Welded wire mesh fence panel. Mesh size 1/2" x 3"" (12mm x 76mm). Finishes available are galvanized or galvanized and polyester powder coated in a variety of colors.
The system can be installed with a vertical or horizontal mesh alignment.
Different post options are available. The system can also be mounted onto existing chain link style posts to retrofit current chain link fence installations.
Security fence system stands out with its translucent and unobtrusive appearance for good visibility which is important for effective security monitoring.
Yet this fence system sends a clear message to would be intruders.
|
|
| » Posted by: CarryGreen Security Fence Co. [China] |
|
|
|
|
|
[Sell]
Floor Slab Heating System |
|
|
Metech as expert welded wire mesh manufacturers, supplies high quality welded wire mesh panels for floor slab heating system. The system is composed by a specially designed heating cable tied to reinforcing mesh and buried in the concrete floor slab. This kind of floor slab heating enables a large surface area distributes the heat more evenly and comfortably throughout the room than traditional systems.
Welded wire panels are simple for installation & fixing of heating pipes or cables, they strengthen heat isolation sheet materials with high tension and strength at the same time increase the load-bearing of the surface floor.
Reinforcing Mesh Sheet Width: 0.5m -1.5m (2 foot -6 foot)
Length of Sheet: 0.5m -4m (2 foot -6 foot)
Opening of Welded Wire Mesh: 2.54cm-20cm (1 inch -8 inch)
Wire Diameter Applied: BWG 18- BWG10 (1.6mm- 3.0mm)
|
|
| » Posted by: Metech Welded Mesh Inc. [China] |
|
|
|
|
|
[Sell]
Slab Reinforcement Mesh |
|
|
Reinforced Welded Wire Mesh Panels are made of galvanized welded wire mesh for constructional uses, for example, block slab structure reinforcing, hollowed slabs reinforcement, building wall reinforcement and support wall reinforcement.
Slab reinforcement mesh or brick wall reinforcing mesh provided by Metech joint reinforcement mesh for masonry wall construction.
It has the continuous lengths of joint reinforcement that are embedded into the horizontal mortar joints of masonry walls. Joint reinforcement has long proven to be necessary for superior performance of masonry wall construction.
Variety: Truss-Mesh Reinforcement
Ladder-Mesh Reinforcement
Available at: hot dipped galvanized, electro galvanized or stainless steel. |
|
| » Posted by: Metech Welded Mesh Inc. [China] |
|
|
|
|
|
[Sell]
Welded Mesh Panels |
|
|
We supply welded wire mesh in rolls or in panels.
Features:
Electrowelded panel has flat surface or crimped surface. Framed or not framed.
Variety:
Framed Panels
C Post Fence Panel
Double Edge Wire Panel
Welded wire panels offer flat even surface, firm structure, be used extensively in building, food, agriculture and so on.
Materials:
Stainless Steel
Galvanized
Hot-dip Zinc Plating
Please specify the following when ordering our panels or gratings:
1: Center to center distance of the panel;
2. Panel width;
3.Panel length;
4. Wire Diameter.
|
|
| » Posted by: Metech Welded Mesh Inc. [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 next»
|
|
|
