|
|
|
|
|
[Sell]
CTB1500X3000 magnetic separator |
 |
|
http://www.zcrusher.com/megnetic-separator.html
Advantages:
1)Short magnetic circuit,
2) little magnetic flux leakage
3) high magnetic intensity
4) low energy consumption
5) fine beneficiating results
6)simple structure and easy to maintain. |
|
» Posted by: Henan Fengde Beneficiation Division [China]  |
|
|
|
|
|
[Sell]
Floatation machine for sale |
|
|
http://www.zcrusher.com/flotation-machine.html
This type of Floatation machine is formed by U through solid, hollow shaft inflation, suspension rotor and new type impeller. The cone impeller lean backwards, the blending quantity is big and the pressure head is small, the advantages are: simple structure and low energy consumption. Inside the impeller, there is air distributor, which distributes air into most parts of impeller evenly.
|
|
| » Posted by: Henan Fengde Beneficiation Division [China] |
|
|
|
|
|
[Sell]
Tongrui Black Engine Oil Refining equipment |
|
|
Tongrui NRY Engine Oil Refining machine is particularly suitable to regenerate used internal-combustion engine oil including diesel engine oil, gasoline engine oil and used hydraulic oil, other used machinery lubrication oil. NRY series are able to effectively remove colloid, oxid, acid, pitch, particles, impurities, water, gas in the used oil. Specially, NRY can restore the color of used oil and remove the scent rapidly.
Edges of NRY
◆ Two main filtering systems in the NRY which can ensure the NRY works continuously by batch.
◆ Environmentally friendly, no acid used during operation.
◆ The filters in filtering systems are made of stainless steel. It can extend lifetime of filtering systems. Traditional filter is made of fabric or paper which need to be replaced frequently. So using stainless steel filter can largely decrease operation cost for customers.
◆ Exhaust gas removing systems can remove exhaust gas quickly and efficiently and make operation more environmentally friendly.
◆ Heat preservation material which can keep heating high efficient. Reducing operation cost. |
|
| » Posted by: Tongrui Filtration Equipment Manufacturing Co.,ltd [China] |
|
|
|
|
|
[Sell]
Tongrui Transformer oil regeneration machine,oil purification Tongrui |
|
|
ZJA series High vacuum Transformer oil regeneration machine is used for overhauling and installing the electric insulating equipments which can running as energized, such as transformer, oil switch, and mutual inductor. Also it is especially applied to regenerate and purify the seriously exhausted insulating oil and make the oils reach the international standard. As a special equipment for dehydration, degassing, purification process of various kinds of insulating oils in electrical transformers and circuit breakers etc. It is designed on vacuum drying principle, coalescence and separation technique, accurate fine filtration etc..
The oil technical data after treatment:
1. Gas content less than 0.1%
2. Impurity size less than 1μm without free carbon
3. Oil dielectric strength (breakdown voltage) more than 75KV
4. Acidity value less than 0.01 mgKOH/g
5. Dielectric loss factors at 90℃ less than 0.001
|
|
| » Posted by: Tongrui Filtration Equipment Manufacturing Co.,ltd [China] |
|
|
|
|
|
[Sell]
Beneficiation flow for sale |
|
|
http://www.zcrusher.com/beneficiation-flow.html
Beneficiation flow:
The Mining Equipments flow produced by our company can provide you with all-around technical support. The whole line consists of vibrating feeder, jaw crusher, vibrating screen,BallMill,MagneticSeparator,Flotation machine,Spiral classifier,Dryer,Mixer,Concentrator,Fiter press and belt conveyor and so on. According to specific requirements, we can combine different models together to meet various needs.
Remark: According to different customers and different mine, my company for you design different beneficiation complete sets of equipment.
|
|
| » Posted by: Henan Fengde Beneficiation Division [China] |
|
|
|
|
|
[Sell]
0.6x10 Rotary Dryer |
|
|
http://www.zcrusher.com/rotary-dryer.html
Rotary dryer introduction:
Drier(Drying Machine) is used for drying materials with a certain humidity or granularity in milling of ores, building materials, metallurgy and chemical industry. Gyro drying machinery has a strong adaptability of materials and it can dry various materials. The operation is very simple and liable. For this reason, it is used widely.
|
|
| » Posted by: Henan Fengde Beneficiation Division [China] |
|
|
|
|
|
[Sell]
Stop valve |
|
|
| Globe valve (Stop valve) Specification: 1)Size: 2"-18" 2)Pressure rating: 150#--1500# 3)Material: WCB/WCC/WC6/WC9/LCB/LCC/CF8/SS304/CF8M/SS316 etc. 4)Standards: A)Design and manufacture: BS 1873/ASME B16.34 B)Inspection and Test: API598 C)Flange connection: ANSI B16.5 D)Face to Face: ASME B16.10 |
|
| » Posted by: Zhejiang Wanli Valve Manufacture Co.,Ltd, [China] |
|
|
|
|
|
[Sell]
Flanged globe valve |
|
|
| Specification: 1)Size: 2"-18" 2)Pressure rating: 150#--1500# 3)Material: WCB/WCC/WC6/WC9/LCB/LCC/CF8/SS304/CF8M/SS316 etc. 4)Standards: A)Design and manufacture: BS 1873/ASME B16.34 B)Inspection and Test: API598 C)Flange connection: ANSI B16.5 D)Face to Face: ASME B16.10 |
|
| » Posted by: Zhejiang Wanli Valve Manufacture Co.,Ltd, [China] |
|
|
|
|
|
[Sell]
Sell gate valve |
|
|
| Gate valve Specifications: 1) Design and manufacture: API600/API6D; 2) Flanges: Conforms to ANSI B16.5; 3) Material: Carbon steel (WCB/LCB/LCC/WC6/WC9), stainless steel (CF8/CF8M, CF3/CF3M); 4) Size: 2 - 24"; 5) Pressure rating: 150lb - 900lbs; 6) Flange end 7) Driving device: handwheel,worm gear |
|
| » Posted by: Zhejiang Wanli Valve Manufacture Co.,Ltd, [China] |
|
|
|
|
|
[Sell]
SS Check valve |
|
|
| Check valve Specification: 1)Size: 2"-24" 2)Pressure rating: 150#-1500# 3)Material: WCB/WCC/WC6/WC9/LCB/LCC/CF8/SS304/CF8M/SS316 etc. 4)Standards: A)Design and manufacture: BS 1868/API6D B)Inspection and Test: API598 C)Flange connection: ANSI B16.5 D)Face to Face: ASME B16.10 |
|
| » Posted by: Zhejiang Wanli Valve Manufacture Co.,Ltd, [China] |
|
|
|
|
|
[Sell]
Jaw crusher plant |
|
|
http://www.zcrusher.com/jaw-crusher.html
The structure of Jaw Crusher:
The structure of Jaw Crusher includes Main Frame, Main Axle, Roller Bearings, Eccentric Shaft, Jaw Plates, Side Plates, Toggle Mechanism, Fly Wheels and Springs.
The Features of Jaw Crusher:
1. Jaw Crusher is of various types;
2. Jaw Crusher is suitable for crushing maximum, medium and minimum stones;
3. The operating principle of Jaw Crusher is easy to be operated;
4. The structure of Jaw Crusher is simple and it is easy to maintain;
|
|
| » Posted by: Henan Fengde Beneficiation Division [China] |
|
|
|
|
|
[Sell]
600*600 Trough Feeder |
|
|
http://www.zcrusher.com/swing-feeder.html
Pendulum feeder introduction:
Our company has always devoted to technology research of machinery equipment for many years, and the factory of Swing Feeder specializes in producing Swing Feeder of every kind. It has the best production equipment, outstanding technical research and development team and produces the best Pendulum Feeder for you. Experts with rich experience in SwingFeeder provide specialized process information about Pendulum Feeder for you. This is the ideal choice for you to invest mineral processing industry. Send me email:equipmentland2008@gmail.com to know more information about Pendulum Feeder.
Pendulum feeder application:
Pendulum Feeder is situable for mineral processing, coal, chemical and other industries. It can deliver granular materials to recieving device of different kinds from storage feed trough through funnel. Swing Feeder is not situable for conveying dry powder or large granularity materials, otherwise it may cause dust pollution and blockage of discharge hole.
|
|
| » Posted by: Henan Fengde Beneficiation Division [China] |
|
|
|
|
|
[Sell]
PF0607 Stone Impact Crusher |
|
|
http://www.zcrusher.com/impact-crusher.html
Impact crusher is mainly used to crush many kinds of large, medium, small hard size materials with compression resistance no more than 350Mpa,in the fields of highway, reservoir, railway, airport and other fields that need rock with cubic shape. It features in high capacity, high performance, high reduction ratio, cubic shape and low flakiness.
The single rotor impact crusher has the characteristics of simple structure, big reduction ratio, low energy consumption l, high output , light weight , cubic physique end product . it can supply the uses of industry sectors such as dressing, chemistry, cement, building, fire-proof material, ceramics, glass to use in hitting garrulous and each kind of medium degree of hardness using of in broken bits material, for example: Limestone, chamotte, slag, coke, coal and so on.
Compare to hammer crusher,impact crusher has bigger reduction ratio and Can fully use the high speed impact energy of entire rotor . But because the impact crusher board hammer is extremely easy to wear, it also is restricted in the hard material stave application.impact crusher is usually used to break thick garrulous, garrulous or the limestone, the coal, the calcium carbide, the quartz, the dolomite, the curing iron ore, the gypsum and the industrial chemicals which are hard following brittle material.
|
|
| » Posted by: Henan Fengde Beneficiation Division [China] |
|
|
|
|
|
[Sell]
Numerical control hydraulic die forging hammer |
|
|
Adapbility:
The numerical control hydraulic die forging hammer is used in precision forging and multiple mould forging of all kinds of accessories.
Performance:
+ Hit energy controled by digitization ,you can set it at will.
+ The hit frequency is high,the hammer head return fast and no close die phenomena.
+ The control system show chinese word,so people can communicate with the machine.
+ The fault diagnosis system can diagnose the machine automated ,this can reduce the analysis of failure reason.
+ The U-Frame and cast steel machine body entirety.
+ We can supply vibration isolation device composed by spring vibration isolation and viscous damping according to the customer's requiement ,this remove the vibration produced in the working.
+ The X type guide rail structure ensurd the good guide and the precision of forgings.
+ The hydraulic liftout device ensured the reliability and stability of mold stripping.
|
|
| » Posted by: Anyang Forging Press Machinery Industry Co., Ltd [China] |
|
|
|
|
|
[Sell]
Pneumatic forging hammer |
|
|
Applications :
This pneumatic forging hammer is widely used for general Forging works, such as drawing-out, upsetting, punching, chiseling, forge, welding, bending and twisting. It is also used for forge in bolster dies.
Features of pneumatic forging hammer:
+ Ready operation: economic and convenient
+ Easy to operate, by manipulating the hand lever or foot-pedal, all operating functions—idle run, top setting, pressing down, single blow, light or full series blow can be obtained as desired
+ A special oil-pump is provided for lubricating the cylinders. Prior to running, turn the hand-crank of the pump to get the cylinders being lubricated beforehand.
|
|
| » Posted by: Anyang Forging Press Machinery Industry Co., Ltd [China] |
|
|
|
|
|
[Sell]
Briquette press |
|
|
Main Tech-features of briquette press：
Eletric part is manipulated by PLC system, strong anti- interference,automatic and easy operation.
Tandem type oil cylinder, high velocity of movement and productivity.
Monoblock cast steel body, avoiding rupture of weld , stable and long life.
User self prepares helix feeder, chain discharge device and guard cover,according to work condition
|
|
| » Posted by: Anyang Forging Press Machinery Industry Co., Ltd [China] |
|
|
|
|
|
[Sell]
Billet Precision Cutting Machine |
|
|
Billet Precision Cutting Machine Introduction：
+ Mainly used for precision billet cutting for bearings, auto, and metallurgy etc.
Characteristic:
+Error of the cutting weight≤ ± 1%, section-slope ≤ 3 °, is an ideal energy-saving high-performance scrap-free cutting equipment.
|
|
| » Posted by: Anyang Forging Press Machinery Industry Co., Ltd [China] |
|
|
|
|
|
[Sell]
Tailing recovery machine |
|
|
http://www.zcrusher.com/tailing-recovery-machine.html
Tailing recovery machine introduction:
Our company has always devoted to technology research of machinery equipment for many years, and the factory of Tailings Recovery System specializes in producing Tailings Recovery System of every kind. It has the best production equipment, outstanding technical research and development team and produces the best Tailings Recovery System for you. Experts with rich experience in Tailings Recovery System provide specialized process information about Tailings Recovery System for you. This is the ideal choice for you to invest mineral processing industry. Take up your mobilephone now and call the inquiry telephone 0371-67858111 to know more information about Tailings Recovery System.
Tailing recovery machine application:
this product is used to recycle tailings in the process of magnetite, makes powdered ore not lose and makes full use of the effective resources.
|
|
| » Posted by: Henan Fengde Beneficiation Division [China] |
|
|
|
|
|
[Sell]
Cone crusher |
|
|
http://www.zcrusher.com/cone-crusher.html
Cone crusher is suitable to crush various kinds of ores and rocks of medium or above medium hardness,and cone crusher is of stable structure, high efficiency, easy adjustment, and use economically, etc. The spring safety system of crusher acts as an overloading protection system that allows metals to pass through the crushing chamber so as not to damage the cone crusher.The safety system uses dry oil and water as two kinds of sealed formation to make plaster powder and engine oil separated to make surereliable performance. The type of crushing chamber depends upon the size of feeding and fineness of the crushed product. The standard type(PYB) is applied to medium crushing, the medium type is applied to medium or fine crushing and the short head type is applied to fine crushing. According to stave work need of Cone crusher,cone crusher is maily usely in the compressive strength not surpassing 300Mpa each kind of ore and rock to medium crush and in broken bits .this is a typical equipment of our country for crushing hard ore to medium crush and broken bits.it is widely applied.it has the charaterisrics of high reduction ratio, high output,,few powder lost, the product granularity even, strong compatibility of hard grain.
Principle of Cone Crusher:
Cone crusher crushes materials by the working surface between the movable cone and fixed cone. The movable cone of the cone crusher is supported by spherical bearing and fixed on an hanging erect shaft which is set in the eccentric sleeve, and the sleeve is set on the stopping and pushing bearing. The movable cone and erect shaft are drived by the eccentric shaft sleeve together. The eccentric shaft sleeve is driven by horizontal shaft and fimbriated gear, and the wheel of the conveyor belt is drived by motor through v-belts.The lower part of vertical shaft is installed in the eccentric sleeve. When the eccentric sleeve of cone crusher rotates, there is a conical surface lined out by the shaft. When the movable cone comes near the fixed cone, rocks are grinded into pieces, when the cone leaves, grinded materials is discharged from the diacharge hole. The fixed cone can be ascended or descended by adjusting setting to adjust the width of discharge hole, consequantly the output size is determined.
|
|
| » Posted by: Henan Fengde Beneficiation Division [China] |
|
|
|
|
|
[Sell]
Trough feeder |
|
|
http://www.zcrusher.com/trough-feeder.html
Trough feeder introduction:
Our company has always devoted to technology research of machinery equipment for many years, and the factory of Trough Feeder specializes in producing Trough Feeder of every kind. It has the best production equipment, outstanding technical research and development team and produces the best Trough Feeder for you. Experts with rich experience in Trough Feeder provide specialized process information about Trough Feeder for you. This is the ideal choice for you to invest mineral processing industry.
Send me email:equipmentland2008@gmail.com to know more information about Trough Feeder.
Trough feeder application:
Trough Feeder is widely used in chemical, mine, metallurgy, construction, mine-selecting and coal and so on. And it sends block material to receiving device through storage silo.
Trough feeder can be set up on the ground and also can be hung on the discharging hole of ore storage bin. Trough base does alternate motion, and its frequency of stroke is 20-60 time/min, its stroke is 20-200 mm. Stroke can be properly adjusted through drive set eccenter. Eccentric distance is the half of stroke. According to production practice of mine-selecting factory, eccentric distance is not less than 30 mm for viscous minerals. Trough width of Trough Feeder is about 2-2.5 times of that of feeding maximum size. The biggest Trough Feeder can meet the feeding ore of iron ore less than 500mm. The common used specification is 980*1240 Trough Feeder, its feeding size is 350-0 mm and is situable for feeding equipment of 400*600 Jaw Crusher .
|
|
| » Posted by: Henan Fengde Beneficiation Division [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 next»
|
|
