|
|
|
|
|
[Sell]
TH-K/N Thermal Relay |
|
|
TH-K/N Thermal Relay The thermal overload relays are suitable for overload protection of AC motor operated on 8-hours duty or uninterrupted duty. The overload protected AC motor with frequency 50Hz,voltage up to 660V,current up to 40A. Several functions provided by these relaus are phase-failure protection,temperature compensation,ON/OFF indication and manual/automatic reset.The relay comply with IEC292-1 standard.
|
|
» Posted by: Kangyu electrical co.,ltd [China] |
|
|
|
|
|
[Sell]
T Thermal Relay |
|
|
T Thermal Relay The relay is suitable for using in the power circuits up to rated voltage 660V,rated current 500A 50Hz or 60Hz for overload and loss of phase protection of three phases induction motor and often combined with B series AC contactor into magnetic starter. T16 & T25 thermal relays have a friction tripp operating mechanism with loss of phase running protection,pullback spring trip operating mechnism(jump mechanism) with loss of phase protection for T85 & TSA45,backpack jump mechanism for T170 & T105,main circuit with instrument transformer jump mechanism with loss of phase for T250 & T370.
|
|
» Posted by: Kangyu electrical co.,ltd [China] |
|
|
|
|
|
[Sell]
LR2 Themal Relay |
|
|
LR2 Themal Relay This series of thermal relay can be used in the circuit of 50Hz or 60Hz,rated insultaion voltage 660V,rated current 0.1-93A for protecting the phase break when the electric motor is overload. The relay has different mechanism and temperatue conpensation & can be plugerd in LC1-D series AC Contactor.At present,it is the most advanced thermal relau in the world. Characteristics a. Fundamental parameter of the main circuit (a).Rated insulation voltage 660V. (b).Rated working current 25,36,93A separately. (c).the regulator seal of rated setting current (d).Current of the thermal component(see list 1) b. Auxiliary Circuit (a).There are one pair of N/O and N/C contact with electric insulation (b).Rated insulation voltage 500V (c).Rated frequency 50-60Hz (d).Use group,rated working voltage,appoint thermal current and rated current.
|
|
» Posted by: Kangyu electrical co.,ltd [China] |
|
|
|
|
|
[Sell]
MY, LY General Relay |
|
|
MY,LY General Relay MY,LY general relay is widely suitable for DC or AC circuit switching in various automation devices,process control and communication equipment etc.It is characteristic of stable performance,high reliability,capable of making and breaking relatively large load current,easy in maintenance and inspection as well as long service life.The plug-in base of the relay is suitable for use with standard 8,11&14 pins socket.They cover the rated current from 3A to 15A.
|
|
» Posted by: Kangyu electrical co.,ltd [China] |
|
|
|
|
|
[Sell]
LR1 Thermal Relay |
|
|
LR1 Thermal Relay LLR1-D series thermal relay is suitable for thermal protection in the circuit with AC 50 or 60Hz,voltage up to 660V,motor power up to 45Kw or less.It has defferential attachment and automatic temperature compensating function.It can be fixed on to contactor and can also be fixed independently. The product is made in accordance with IEC292-1.
|
|
» Posted by: Kangyu electrical co.,ltd [China] |
|
|
|
|
|
[Sell]
3UA Thermal Relay |
|
|
3UA Thermal Relay 3UA thermal relay is suitable ofr using in power system with AC 50Hz,rated operation voltage up to 660V and 1000V,in main circuit,current from 0.1A to 630A.It is used to protect AC three phase asynchronous motor against overload and open-phase. The current setting value can be regulated and the setting current values of many thermal elements are intercrossing overlepping arrangement,for easy selecting by the customers from -25¢J to +55¢J air temperature as the products have temperature compesating.The relays have the tst pushbutton for breaking NC contacts,the operating indication and free trip characteristics.The item conform to IEC292-1,IEC337-1 & VDE0660.
|
|
» Posted by: Kangyu electrical co.,ltd [China] |
|
|
|
|
|
[Sell]
MK General Relay |
|
|
MK General Relay MK2P 3P general relay is widely suitable for DC or AC circuit switching in various automation devices,process control and communication equipment etc.It is chatacteristic of stable performance,high reliability,capable of making and breaking relatively large load current,easy in maintenance and inspection as well as long service life.The plug-in base of the relay is suitable for us with standard 8 and 11 pins socket.
|
|
» Posted by: Kangyu electrical co.,ltd [China] |
|
|
|
|
|
[Sell]
NT-58 Mini Circuit Breaker |
|
|
NT-58 Mini Circuit Breaker The circuit breaker is used as a protection switch for power supplying a circuit with AC 50/60Hz,voltage 220V,current up to 32A.It has inherent overload protection function.Combined with a fuse,it can also provide short circuit protection for circuit.Besides,it can unfrequently make and break a loaded circuit.It is especially suitable for lighting devices in houses and public places,or a single electric appliance such as refrigerator etc.
|
|
» Posted by: Kangyu electrical co.,ltd [China] |
|
|
|
|
|
[Sell]
NC 100H Mini Circuit Breaker |
|
|
NC 100H Mini Circuit Breaker NC 100H high breaking capacity circuit breaker is used for AC 50Hz or 60Hz,single pole 240V,2,3,4 poles 415V,for protecting the circuit which overload and short circuit may take place.It can be used I lighting and electric motor distribution system.Meantime it is applicable to an unfrequent switch the electric apparatus and lighting circuit under normal condition.Breaking capacity is up to standard of IEC947-7 10KA.
|
|
» Posted by: Kangyu electrical co.,ltd [China] |
|
|
|
|
|
[Sell]
MY MT MU Mini Circuit Breaker |
|
|
MY MT MU Mini Circuit Breaker MY MT MU MCB is mainly suitable for overload and short circuit protection.It is especially used for illumination and distribution in industry and commerce.It is of pleasing outlook&high breaking capacity etc.Its frame and parts adopts plastics of light weight,reliable performance,high inflammable resistance and shock resistance for long service life.It is mainly used for overload and short circuit protection within the circuit of AC 50/60Hz,rated voltage of single pole up to 240V,two,three or four pole to 415V.It can also be used for an unfrequnet switchover of the circuit and illumination under normal conditions.
|
|
» Posted by: Kangyu electrical co.,ltd [China] |
|
|
|
|
|
[Sell]
L7 Series Circuit Breaker |
|
|
L7 Series Circuit Breaker The L7 series MCB belongs to the advanced level of the world.They have the characteristics of small size,high sensitivity long using life and strong protective function for short circuit and overload.The products are the newest generation and feature of high protective grade,high breaking capacity,good reliability of sensitive action and convenienty use.It is generally used for illumination and distribution in industry,commerce and buildings.
|
|
» Posted by: Kangyu electrical co.,ltd [China] |
|
|
|
|
|
[Sell]
K Series Mini Circuit Breaker |
|
|
K Series Mini Circuit Breaker K MCB is mainly suitable for overload and short circuit protection.It is especially used for illumination and distribution in industry and commerce.It is of pleasing out-look,light weight,reliable performance,high breaking capacity,etc.Its frame and parts adopt plastics of high inflammable resistance and shock resistance for long service life.It is mainly used for overload and short circuit protection within the circuit of AC 50/60Hz,rated voltage of single pole up to 240V,two,three or four pole up to 415V.It can alsi be used for an unfrequent switchover of the circuit illumination under normal conditions.
|
|
» Posted by: Kangyu electrical co.,ltd [China] |
|
|
|
|
|
[Sell]
Dz¢¸phase+neutral¢¸circuit breaker |
|
|
DZ¡¨PHASE+NEUTRAL¡¨CIRCUIT BREAKER The products is applicable to protect line conductor and overload,and short circuit of small sealed motors.It is mainly for protection of circuits with AC 220V and 50Hz/60Hz,and for unfrequent conversion under normal conditions as well.Its action can be up to two poles with its only one pole volume and be used as a leakage breaker by assembling with leakage.It is produced as per EN898-87,IEC947-2 standards. Technical data 1. Current rating:1,2,3,4,6,10,20,25,32A at 30¢J; 2. Voltage rating:220/240V AC 3. Breaking capacity to En 60898:4500A 4. Number of operating cycles(o-c):20000 5. Tripping characteristics: B curve:the magnetic release operate between 3 and 5 In C curve:the magnetic release operate between 5 and 10 In
|
|
» Posted by: Kangyu electrical co.,ltd [China] |
|
|
|
|
|
[Sell]
BH Mini Circuit Breaker |
|
|
BH Mini Circuit Breaker BH series mini circuit breaker is characteristics of small size,light weight,novel struture and excellent performance.They are mounted in the illuminating distribution board and used in guesthouse,block of flats,high buildings,square,airports,railway stations,plants and enterprise etc,in AC circuits 240V(single pole)up to 415V(3 pole)50Hz for protection of overload short circuit and for circuit changover in lighting system.Breaking capacity is 3KA.The items comply with BS & NEMA standard.
|
|
» Posted by: Kangyu electrical co.,ltd [China] |
|
|
|
|
|
[Sell]
PG230 PG430 Earth Leakag Circuit Breaker |
|
|
PG230 PG430 Earth Leakag Circuit Breaker PG230 & PG430 breakers are cuitable in AC 50Hz,250/440V circuit for earth leakage protection.The rated current is adjustable from 10A to 60A.User can select suitable current to better protection against overload and short circuit.The products comply with NFC61450.
|
|
» Posted by: Kangyu electrical co.,ltd [China] |
|
|
|
|
|
[Sell]
NFIN Residual Current Device |
|
|
NFIN Residual Current Device The Residual Current Device NFIN is in conformity with the standards of IEC 1008,VDE 0664,CEE27 and BS 4293. It can cut off the fault circuit immediately on the occasion of shock hazard or earth leakage of trunk line.Thus it si suitable to avoid the shock hazard and fire caused by earth leakage. NFIN RCD is mainly suitable for using in varieties of plants,enterprises,buildings,constructions,commerce.Hotels and families.It can be used in circuits up to single phase 240V,three phase 415V,50 or 60Hz.
|
|
» Posted by: Kangyu electrical co.,ltd [China] |
|
|
|
|
|
[Sell]
KYRC Residual Current Circuit Breaker |
|
|
KYRC Residual Current Circuit Breaker To open a circuit automatically in the case of an earth leakage fault between phase and earth and/or neutral greater or equal to 10mA,30mA,100mA,300mA or 500mA;it is used in domestic,commercial and industrial installations. Earth fault indicator Mechanical indicator appearing on the front face of the RCCB is to be differed between tripping and off position yellow-tripped. Nuisance tripping All the RCCBs are protected against transient voltages(lighting,line disturbances) and transient currents(from high capacitive circuits)DC sensitive RCCBs or time delau devices are available,please consult us you also have the possibility to install the following accessories:electrical cover kit locking kit.
|
|
» Posted by: Kangyu electrical co.,ltd [China] |
|
|
|
|
|
[Sell]
KYM Residual Current Circuit Breaker |
|
|
KYM Residual Current Circuit Breaker KYM residual current operated circuit-breaker with integral overcurrent protection can be used in the domestic and public field for otimu protetion of life against the risks if indirect overload.The residual current operated circuit-breakers with integral overcurrent.Protection combine in fact a protection against earthing fault(differential protection) and a protection against overcurrents detected in the installations magnetothermic protection versions using a rated residual fault current of 30mA also assure an additional protection in case of direct contacts.KYM series are equipped with overcurrent triggers integratd and manufactureed according to the most recent national and international regulations:standards IEC1009-1 and IEC23-18,their sizes are in compliance with the regulations of the standard DIN 43880,one module is 18mm(1pole),front window height equal to 45mm.According to IEC1009-1,KYM type of RCBO has no special operating process,so it can be used by laypeople.
|
|
» Posted by: Kangyu electrical co.,ltd [China] |
|
|
|
|
|
[Sell]
KY60NL Residual Current Circuit Breaker |
|
|
KY60NL Residual Current Circuit Breaker The KY60NL RCCB incorporates a residual current operated electromagnetic release which operates without any auxiliay source of supply to open a circuit automatically in the case of an earth leakage fault between phase and earth greater than or equal to I¡µn. The KY60NL combined MCB & RCCB provides: 1. protection against indirect contact. 2. complementary protection against direct contact 3. protection for the installation against insulation faults
|
|
» Posted by: Kangyu electrical co.,ltd [China] |
|
|
|
|
|
[Sell]
FIN Residual Current Device |
|
|
FIN Residual Current Device The Residual Current Device RCD FIN is in conformity with the standard of VDE 0664,CEE 27 and BS 4293. It can cut off the fault circuit immediately on the occasion of shock hazard or earth leakage of trunk line.Thus it is suitable to avoid the shock hazard and fire caused by earth leakage. FIN ELCB is mainly suitable for varieties of plants and enterprises,building,construction,commerce,hotels and families.It can be used in circuits up to single phase 240V,three phase 415V,50 to 60Hz.
|
|
» Posted by: Kangyu electrical co.,ltd [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 next»
|
|