|
|
|
|
|
|
|
[Sell]
Thermoelectric materials, Peltier elements , Thermoelectric elements |
 |
|
Thermoelectric materials, Peltier elements , Thermoelectric elements ,
Thermoelectric crystalbar, Thermoelectric components, Thermoelectric dices, wafers,
From the foundation of Wellen Tech, we are manufacturing the peltier element used in our TE modules. After about ten years' hard working, the production technology and quality of thermoelectric materials have reached the leading level in China.We can provide all kinds of thermoelectric material, such as ingots, wafers and elements. We can slice and dice in high accuracy. The minimun size can be 0.4mm.
|
|
» Posted by: Wellen technology Co.,Ltd [China]  |
|
|
|
|
|
[Sell]
heat pipe assembiies |
|
|
Heat Pipe assemblies
We can custom design many kinds of heatpipe assemblies ,Please do not hesitate to contact us if you have any requirement .
|
|
| » Posted by: Wellen technology Co.,Ltd [China] |
|
|
|
|
|
[Sell]
TR SOLAR COB LED 4W CANDLE LIGHT |
|
|
LED candle bulbs,led light,led bulbs,candle bulbs
LED Qty: 4w
LED Chip: Bridgelux
Voltage: AC85-265V/110VAC/220VAC CCT: 2700K -6500K
Base: E14/E12/E11/E17 Beam Angle: 360DPhotometric stereo
Life Span: 40,000hrs
Size: Φ35*101mm
|
|
| » Posted by: TR Solar Energy Group Co.,Ltd [China] |
|
|
|
|
|
[Sell]
sell 13.56MHz rfid module JMY680 IIC, UART, RS232C or USB |
|
|
This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me.
JMY680 series are RFID reader/writer module with IIC or UART serial ports. JMY680 has various functions and supports multi ISO/IEC standard of contactless IC card; the cards from different suppliers. The designer combined some frequent used command of RF IC card and then user could operate the cards with full function by sending simple command to the module through IIC or UART interface. The module and antenna are integrated design. And the impedance between RF module and antenna was tuned by impedance analyzer. So the module has excellent performance and stability.
Qualifications:
PCD: NXP RC500, RC531, RC400, RC632
Working frequency: 13.56MHz
RF standard: ISO14443A, ISO14443B, ISO15693
Operating distance: 80mm(depending on card and antenna design)
Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only
Auto detecting card: Supported, default ON
SAM card slot: 1 slot, 9600bps /38400bps
EEPROM: 512 Bytes
PPSS set: Supported
Interface: IIC, UART, RS232C or USB to RS232C Bridge(select when place order)
Communication rate: IIC--400Kbps; UART--19.2Kbps/115.2Kbps
Max.command length: 511 Bytes
Interface level: 3.3V (TTL level; 5V tolerance)
Power supply: 5.0V
Power consumption: 150mA
Dimension: 70mm*50mm*16.5mm
Weight: about 120g
Operating temperature: -25 ~ +85 centigrade
Storage temperature: -40 ~ +125 centigrade
ISP: Supported
RoHS: Compliant |
|
| » Posted by: Jinmuyu Electronics Co., Ltd [China] |
|
|
|
|
|
[Sell]
sell 13.56MHz RFID Module JMY609 PCD: NXP RC522, RC523 |
|
|
This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me.
JMY609, based on NXP PCD, is the reader module. The module supports series IC cards according to ISO14443A, ISO14443B and imitates the USB keyboard to read and output the card data. JMY609 is reader module with USB interface (HID standard). In the systems of Windows, Linux and other PC systems support USB keyboard, the module imitates the USB keyboard to operate the card data. With our software and DIP switch, the users can set the reader if to read the number of the card or the data of the card or both. And the data can be positive sequence output or be reverse order output. Meanwhile the users can choose freely the key output such as enter, tab etc. after the output of the number and the data of the card. The default of the JMY609 is configuration mode in factory setting. If you want to let the reader work, you need cofigurate it through the software and input the configuration information to the reader. There are 2 SAM card slots in the reader. If the users need read the SAM card and use the SAM to cooperate with the operation, and then you can contact us, we will help you do the job.
Qualifications:
PCD: NXP RC522, RC523
Working frequency: 13.56MHz
RF standard: ISO14443A, ISO14443B
Operating distance: 80mm (Mifare One, typical distance)
SAM card slot: 2 slots, (supported ISO7816 T=0 and T=1)
Interface: USB (HID standard)
Power supply: DC5V
Power consumption: 180mA
Dimension: 123mm*88mm*25mm
Weight: about 100g
Operating temperature: -25 ~ +85 centigrade
Storage temperature: -40 ~ +125 centigrade |
|
| » Posted by: Jinmuyu Electronics Co., Ltd [China] |
|
|
|
|
|
[Sell]
Sell 13.56 MHz rfid module JMY608 Interface: USB (HID standard) |
|
|
This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me.
JMY608, based on NXP SL RC400, is the reader module. The module supports series IC cards according to ISO15693, and imitates the USB keyboard to read and output the card data. JMY608 is reader module with USB interface (HID standard). In the systems of Windows, Linux and other PC systems support USB keyboard, the reader imitates the USB keyboard to operate the card data. With our software and DIP switch, the users can set the reader if to read the number of the card or the data of the card or both. And the data can be positive sequence output or be reverse order output. Meanwhile the users can choose freely the key output such as enter, tab and so on after the output of the number and the data of the card. The default of the JMY608 is configuration mode in factory setting. If you want to let the reader work, you need cofigurate it through the software and input the configuration information to the reader.
Qualifications:
PCD: NXP RC400
Working frequency: 13.56MHz
RF standard: ISO15693
Operating distance: 100mm
SAM card slot: no
Interface: USB (HID standard)
Power supply: DC5V
Power consumption: 180mA
Dimension: 123mm*88mm*25mm
Weight: about 100g
Operating temperature: -25 ~ +85 centigrade
Storage temperature: -40 ~ +125 centigrade |
|
| » Posted by: Jinmuyu Electronics Co., Ltd [China] |
|
|
|
|
|
[Sell]
Sell 13.56MHz rfid module JMY603 Interface: UART |
|
|
This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me.
JMY603 series are RFID reader/writer module with UART serial ports. JMY603 has various functions and supports multi ISO/IEC standard of contactless IC card; the cards from different suppliers. The designer combined some frequent used command of RF IC card and then user could operate the cards with full function by sending simple command to the module. The module and antenna are integrated design. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability.
Qualifications:
Authenticated: BCTC(the Bank Card Test Center )--contactless Bank Card LEVEL 1
PCD: NXP RC500, RC531, RC632
Working frequency: 13.56MHz
RF standard: ISO14443A, ISO14443B, ISO15693
Operating distance: 80mm (Mifare One, typical distance)
Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only
Auto detecting card: Supported, default OFF
EEPROM: 512 Bytes
Interface: UART
Baud rate: 19200--115200 BPS
Power supply: DC5V
Power consumption: 80mA
Dimension: 85mm*60mm*10mm
Weight: about 25g
Operating temperature: -25 ~ +85 centigrade
Storage temperature: -40 ~ +125 centigrade |
|
| » Posted by: Jinmuyu Electronics Co., Ltd [China] |
|
|
|
|
|
[Sell]
Supply 13.56MHz rfid module JMY602 Interface: IIC, UART, RS232C or USB |
|
|
This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me.
JMY602 series are RFID reader/writer module with IIC or UART or USB ports. There are 2 SAM card slots in the module which supports SAM cards compliant with ISO7816 (T=0 and T=1). And also it supports SAM card(38400bps)which was used in domestic card management system.
JMY602 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. The designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module. The module and antenna are integrated design. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability.
Qualifications:
PCD: NXP RC500, RC531, RC632, RC400
Working frequency: 13.56MHz
RF standard: ISO14443A, ISO14443B, ISO15693
Operating distance: 100mm (Mifare One, typical distance)
Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only
Auto detecting card: Supported, default OFF
SAM card slot: 1 slot, 9600bps/38400bps
EEPROM: 512 Bytes
PPSS: supported
Interface: IIC, UART, RS232C or USB (embedded CP2102 USB to RS232 converter)
Baud rate: IIC: 400Kbps, UART/RS232/USB to RS232: 19200--115200 bps
Max.command length: 254 Bytes /511 Bytes
Power supply: DC5V
Power consumption: 80mA
Dimension: 100mm*70mm*10.2mm
Weight: about 120g
Operating temperature: -25 ~ +85 centigrade
Storage temperature: -40 ~ +125 centigrade
ISP: supported
RoHS: Compliant |
|
| » Posted by: Jinmuyu Electronics Co., Ltd [China] |
|
|
|
|
|
[Sell]
Sell 13.56MHz rfid module JMY601 Interface: UART(TTL Level)) |
|
|
This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me.
JMY601 series are RFID reader/writer module with UART serial ports. JMY601 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. The RF protocol is complex. But the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module through UART interface. The module and antenna are integrated design. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability.
Qualifications:
PCD: NXP RC531, RC632
Working frequency: 13.56MHz
RF standard: ISO14443A, ISO14443B, ISO15693
Operating distance: 80mm(Mifare One, typical distance)
Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only
Auto detecting card: Supported, default OFF
EEPROM: 512 Bytes
Interface: UART(TTL Level)
Baud rate: 19200bps--115200 bps
Max.command length: 254 Bytes
Interface level: 3.3V(TTL level; 5V tolerance)
Power supply: DC5V
Power consumption: 80mA
Dimension: 60mm*60mm*5.7mm
Weight: about 20g
Operating temperature: -25 ~ +85 centigrade
Storage temperature: -40 ~ +125 centigrade
RoHS: Compliant |
|
| » Posted by: Jinmuyu Electronics Co., Ltd [China] |
|
|
|
|
|
[Sell]
Sell 13.56MHz RFID Module JMY506 PCD: NXP RC522, RC523 |
|
|
This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me.
JMY506 series are RFID reader/writer module with UART and IIC serial ports. JMY506 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. The RF protocol is complex. But the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module through IIC or UART interface. And the module and antenna are separate design. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. The module and antenna is linked by 50ohm coaxial line. The performance is good, though the wire can reach 10m. Normally the wire should be 60cm that is the module's best performance and stability.
Qualifications:
PCD: NXP RC522, RC523
Working frequency: 13.56MHz
Antenna connection: by 50ohm coaxial line, (recommend 60cm, Max. 10 meters), due to order
RF standard: ISO14443A, ISO14443B
Operating distance: 80mm(depending on card and antenna design)
Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only
Auto detecting card: Supported, default OFF
EEPROM: 512 Bytes
Interface: IIC&UART(selected by SPS pin, recommend to use IIC)
Communication rate: IIC--400Kbps, UART--19.2Kbps/115.2Kbps
Max.command length: 254 Bytes
Interface level: 3.3V(TTL level; 5V tolerance)
Power supply: DC 5.0V
Power consumption: 50mA
Dimension: 42mm*21mm*8mm
Package: DIP32
Weight: about 15g
Operating temperature: -25 ~ +85 centigrade
Storage temperature: -40 ~ +125 centigrade
ISP: Supported
RoHS: Compliant |
|
| » Posted by: Jinmuyu Electronics Co., Ltd [China] |
|
|
|
|
|
[Sell]
sell 13.56MHz RFID Module JMY505 50ohm coaxial cable |
|
|
This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me.
JMY505 series are RFID reader/writer module with UART and IIC serial ports. JMY505 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. The RF protocol is complex. But the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module through IIC or UART interface. And the module and antenna are separate design. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. The module and antenna is linked by 50ohm coaxial line. The performance is good, though the wire can reach 10m. Normally the wire should be 60cm that is the module's best performance and stability.
Qualifications:
PCD: MF RC500, RC531, RC632, RC400
Working frequency: 13.56MHz
Antenna connection: by 50ohm coaxial line, (recommend 60cm, Max. 10 meters), due to order
RF standard: ISO14443A, ISO14443B, ISO15693
Operating distance: 100mm(depending on card and antenna design)
Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only
EEPROM: 512 Bytes
Interface: IIC & UART (selected by SPS pin, recommend to use IIC)
Communication rate: IIC--400Kbps, UART--19.2Kbps/115.2Kbps
Max.command length: 511 Bytes
Interface level: 3.3V(TTL level; 5V tolerance)
Power supply: DC 5.0V
Power consumption: 70mA
Dimension: 42mm*21mm*8mm
Package: DIP32
Weight: about 15g
Operating temperature: -25 ~ +85 centigrade
Storage temperature: -40 ~ +125 centigrade
ISP: Supported
RoHS: Compliant |
|
| » Posted by: Jinmuyu Electronics Co., Ltd [China] |
|
|
|
|
|
[Sell]
sell 13.56MHz rfid module JMY504 PCD: NXP RC522, RC523 |
|
|
This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me.
JMY504 series are RFID reader/writer module with UART and IIC serial ports. JMY504 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. The RF protocol is complex. But the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module through IIC or UART interface. And the module and antenna are separate design. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. The module and antenna is separate design. 4 wires are linked the antenna and module. Normally the wire should be less than 200mm, or it will affect the module's performance and stability.
Qualifications:
PCD: NXP RC522, RC523
Working frequency: 13.56MHz
RF standard: ISO14443A, ISO14443B
Operating distance: 80mm(depending on card and antenna design)
Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only
Auto detecting card: Supported, default OFF
EEPROM: 512 Bytes
Interface: IIC & UART (selected by SPS pin, recommend to use IIC)
Communication rate: IIC 400Kbps, UART 19.2Kbps/115.2Kbps
Max.command length: 254 Bytes
Interface level: 3.3V(TTL level; 5V tolerance)
Power supply: DC 5.0V
Power consumption: 50mA
Dimension: 42mm*21mm*8mm
Package: DIP32
Weight: about 15g
Operating temperature: -25 ~ +85 centigrade
Storage temperature: -40 ~ +125 centigrade
ISP: Supported
RoHS: Compliant
|
|
| » Posted by: Jinmuyu Electronics Co., Ltd [China] |
|
|
|
|
|
[Sell]
sell 13.56MHz RFID Module JMY501 Interface: IIC & UART |
|
|
This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me.------
JMY501 series are RFID reader/writer module with UART and IIC serial ports. JMY501 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. The RF protocol is complex. But the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module through IIC or UART interface. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. The module and antenna is separate design. 4 wires are linked the antenna and module. Normally the wire should be less than 200mm, or it will affect the module's performance and stability.
Qualifications:
PCD: NXP RC500, RC531, RC632, RC400
Working frequency: 13.56MHz
RF standard: ISO14443A, ISO14443B, ISO15693
Operating distance: 100mm(depending on card and antenna design)
Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only
Auto detecting card: Supported, default OFF
EEPROM: 512Bytes
Interface: IIC & UART (selected by SPS pin, recommend to use IIC)
Communication rate: IIC--400Kbps, UART--19200bps/115200bps
Max.command length: 511 Bytes
Interface level: 3.3V (TTL level; 5V tolerance)
Power supply: DC5V
Power consumption: 70mA
Dimension: 42mm*21mm*8mm
Package: DIP32
Weight: about 15g
Operating temperature: -25 ~ +85 centigrade
Storage temperature: -40 ~ +125 centigrade
ISP: Supported
RoHS: Compliant |
|
| » Posted by: Jinmuyu Electronics Co., Ltd [China] |
|
|
|
|
|
[Sell]
sell 13.56MHz rfid reader MR600 LED Nixie Tube |
|
|
This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me.
MR600 series contactless smart reader is the desktop reader bases on NXP PCD or compatible PCD. The reader inlays LED Nixie tube which displays 8 numbers. The reader fully supports the IC card according to ISO14443A, ISO14443B, ISO15693 and ISO7816(T=0 & T=1); Various contactless IC card under international standard. The reader embeds SAM card slot. We do the optimization for application of domestic card system and so it can support fully SAM card according to ISO7816 (9600bps & 38400bps).
Qualifications:
PCD: NXP RC500, RC531, RC632, RC400; FM1722
Working frequency: 13.56MHz
RF standard: ISO14443A, ISO14443B, ISO15693
Operating distance: 80mm (Mifare One, typical distance)
SAM card slot: 1 slot, Supported: ISO7816 T=0, Supported: 9600bps&38400bps
Interface: RS232C or USB (build-in USB to UART converter)
Baud rate: 9600 ~ 115200 bps
Power supply: DC5V
Power consumption: 1.5W
Dimension: 141mm*100mm*31mm
Weight: about 100g
Operating temperature: -25 ~ +85 centigrade
Storage temperature: -40 ~ +125 centigrade |
|
| » Posted by: Jinmuyu Electronics Co., Ltd [China] |
|
|
|
|
|
[Sell]
sell 13.56MHz rfid reader MR730 Interface: Ethernet RJ45 |
|
|
This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me.
MR730 series contactless smart reader is the Ethernet interface desktop reader based on NXP PCD or compatible PCD. It doesn't have display. The reader supports series IC cards according to ISO14443 & ISO15693; various contactless IC card under international standard; especially the contactless CPU cards under ISO14443-4. Meanwhile the reader is available to pass EMV2000 and PBOC 2.0 and be authenticated by many laboratories--Visa Wave & Pay Pass (by FIME) and the Bank Card Test Center. The reader embeds SAM card slot. We do the optimization for application of domestic payment system and so it can support fully SAM card under 9600bps & 38400bps.
Qualifications:
PCD: NXP RC500, RC531, RC632, RC400; FM1722
Working frequency: 13.56MHz
RF standard: ISO14443A, ISO14443B, ISO15693
Operating distance: 80mm (Mifare One, typical distance)
SAM card slot: 1 slot, supported ISO7816 T=0, supported 9600bps&38400bps
Interface: Ethernet RJ45
Baud rate: 9600 ~ 115200 BPS
Power supply: DC5V
Power consumption: 1.5W
Dimension: 141mm*100mm*31mm
Weight: about 100g
Operating temperature: -25 ~ +85 centigrade
Storage temperature: -40 ~ +125 centigrade |
|
| » Posted by: Jinmuyu Electronics Co., Ltd [China] |
|
|
|
|
|
[Sell]
sell rfid 13.56MHz reader MR761 PCD: NXP RC522, RC523 |
|
|
This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me.
MR761 series, based on NXP PCD, is the desktop reader. The reader supports series IC cards according to ISO14443A, ISO14443B and outputs the data by the way of simulation keyboard through USB interface. MR761 IC card is desktop reader with USB interface (HID standard). In the systems of Windows, Linux and other PC systems support USB keyboard, the reader imitates the USB keyboard to operate the card data. With our software and DIP switch, the users can set the reader if to read the number of the card or the data of the card or both. And the data can be positive sequence output or be reverse order output. Meanwhile the users can choose freely the key output such as enter, tab etc. after the output of the number and the data of the card.
The default of the MR761 is configuration mode in factory setting. If you want to let the reader work, you need deploy it through the software and input the configuration information to the reader. The reader embeds 2 SAM card slots. If the users need read the SAM card and use the SAM to cooperate with the operation, and then you can contact us, we will help you do the job.
Qualifications:
PCD: NXP RC522, RC523
Working frequency: 13.56MHz
RF standard: ISO14443A, ISO14443B
Operating distance: 80mm (Mifare One, typical distance)
SAM card slot: 2 slots, (supported ISO7816 T=0 and T=1)
Interface: USB (HID standard)
Power supply: DC5V
Power consumption: 0.6W
Dimension: 123mm*88mm*25mm
Weight: about 100g
Operating temperature: -25 ~ +85 centigrade
Storage temperature: -40 ~ +125 centigrade
|
|
| » Posted by: Jinmuyu Electronics Co., Ltd [China] |
|
|
|
|
|
[Sell]
sell 13.56MHz rfid reader MR760 USB (HID standard) |
|
|
This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me.
MR760 series, based on NXP SL RC400,RC632 are the desktop reader. The reader supports series IC cards according to ISO15693,ISO14443A, ISO14443B and the reader imitates the USB keyboard to read and output the card data. MR760 IC card is desktop reader with USB interface (HID standard). In the systems of Windows, Linux and other PC systems support USB keyboard, the reader imitates the USB keyboard to operate the card data. With our software and DIP switch, the users can set the reader if to read the number of the card or the data of the card or both. And the data can be positive sequence output or be reverse order output. Meanwhile the users can choose freely the key output such as enter, tab etc. after the output of the number and the data of the card.
The default of the MR760 is configuration mode in factory setting. If you want to let the reader work, you need deploy it through the software and input the configuration information to the reader. We monitor the quality of the products strictly by the introduction of advanced equipment, to ensure that the reader has good quality and stability.
Qualifications:
PCD: NXP RC400,RC632
Working frequency: 13.56MHz
RF standard: ISO14443A, ISO14443B, ISO15693
Operating distance: 100mm (I.CODE SLI, typical distance)
SAM card slot: no
Interface: USB (HID standard)
Power supply: DC5V
Power consumption: 0.6W
Dimension: 123mm*88mm*25mm
Weight: about 150g
Operating temperature: -25 ~ +85 centigrade
Storage temperature: -40 ~ +125 centigrade |
|
| » Posted by: Jinmuyu Electronics Co., Ltd [China] |
|
|
|
|
|
[Sell]
sell 13.56MHz rfid reader MR780 Interface: RS232C or USB |
|
|
This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me.
MR780 series, based on NXP PCD or compatible PCD, is popular and high performance desktop reader. The reader supports series IC cards according to ISO14443, ISO15693; various contactless IC card under international standard; especially the contactless CPU cards under ISO14443-4. Meanwhile the reader is available to pass EMV2000 and PBOC 2.0 and be authenticated by many laboratorial certifications---Visa Wave & Pay Pass (by FIME) and the Bank Card Test Center. There are 3 SAM card slots in the reader(T=0 and T=1). The reader supports card-reset of various communication rate; PPSS operation after card-reset.
Qualifications:
PCD: NXP RC500, RC531, RC632, RC400; FM1722
Working frequency: 13.56MHz
RF standard: ISO14443A, ISO14443B, ISO15693
Operating distance: 100mm (Mifare One, typical distance)
SAM card slot: 3 slots, (supported ISO7816 T=0 and T=1)
Interface: RS232C or USB (build-in CP2102 USB to UART converter)
Baud rate: 9600--115200 BPS
Power supply: DC5V
Power consumption: 0.9W
Dimension: 123mm*88mm*25mm
Weight: about 100g
Operating temperature: -25 ~ +85 centigrade
Storage temperature: -40 ~ +125 centigrade
|
|
| » Posted by: Jinmuyu Electronics Co., Ltd [China] |
|
|
|
|
|
[Sell]
sell 13.56MHz rfid reader MR810 MCU: ARM7 |
|
|
This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me.
MR810 series, based on NXP PCD, are the USB PC/SC interface smart reader. The reader supports series IC cards according to ISO14443A, ISO14443B, ISO15693 and ISO7816; various contactless IC card under international standard; especially the contactless CPU cards under ISO14443-4. Meanwhile the reader is available to pass EMV2000 and PBOC 2.0 and be authenticated by many laboratorial certifications---Visa Wave & Pay Pass (by FIME) and the Bank Card Test Center. There are 2 SAM card slots in the reader which support SAM cards compliant with ISO7816 (T=0 and T=1). The reader supports card-reset of various communication rate; PPSS operation after card-reset; SAM operation of various communication rate.
Qualifications:
PCD: NXP RC531, RC632
Working frequency: 13.56MHz
RF standard: ISO14443A, ISO14443B, ISO15693
Operating distance: 100mm (Mifare One, typical distance)
Operating distance: 2 slots, (supports ISO7816 T=0 and T=1)
Interface: USB PC/SC
Power supply: DC5V
Power consumption: 0.9W
Dimension: 123mm*88mm*25mm
Weight: about 100g
Operating temperature: -25 ~ +85 centigrade
Storage temperature: -40 ~ +125 centigrade |
|
| » Posted by: Jinmuyu Electronics Co., Ltd [China] |
|
|
|
|
|
[Sell]
sell 13.56MHz rfid reader MR800 Interface: USB PC/SC |
|
|
This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me.
MR800 series for reader/writer with the popular ARM7 microprocessors are of rapid & stable, reliable operation and beautiful appearance. User can choose freely if with the LCD display modul(128x64). They support boot screen & idle screen set and picture storage etc. The interface is USB PC/SC. They can be directly used the Windows operating system with driver and the API functions. The development cycle simple and short. The reader not only supports series IC cards according to ISO14443 TypeA/B, ISO15693 but also SAM cards compliant with ISO7816 (T=0 and T=1).
Qualifications:
PCD: NXP RC531, RC632; RC400, RC500(select)
Working frequency: 13.56MHz
RF standard: ISO14443A, ISO14443B, ISO15693
Operating distance: 100mm (Mifare One, typical distance)
SAM card slot: 2 slots, (supports ISO7816 T=0 and T=1)
Interface: USB PC/SC
Power supply: USB DC5V
Power consumption: 0.9W
LED: four LED (red, green, blue, yellow)
Dimension: 123mm*88mm*25mm
Weight: About 200g
Operating temperature: -25 ~ +85 centigrade
Storage temperature: -40 ~ +125 centigrade
|
|
| » Posted by: Jinmuyu Electronics Co., Ltd [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 next»
|
|
|
