|
|
|
|
|
|
|
[Sell]
thomas high temperature resistant UV curing adhesive |
 |
|
Name UV curable high temperature resistant adhesive（THO4094）
Outline It is heterocyclic adhesive which cures fast with UV light. it is temperature resistant and easy to operate. No bubbles appear after curing thus making the surface smooth and bright
Applications It applies to the coating, infiltrating and encapsulating of device surface, electronic components and chips in electric engine, capacitor, thermocouples, transformers, rectifiers, electronic modules LSI and other products to protect them against moisture, chemicals, excessive heat, vibration, mechanical impact and thermal shocks. It also applies to the bonding of metals, alloy, ceramics, glass and transparent compound.
Features It is transparent thick liquid.
It cures within 5 to 15 seconds exposed to UV light with its wavelength from 280 to 365 nm。
It is resistant to shock, ultraviolet light and extreme weather once it cures because it is durable and with good ductility and low contraction coefficient.
Being heat-resistant, it adapts to a wide range of temperature and bonds well under high temperature.
Being moderate in viscosity, the surface appears smooth and bright after curing.
Apply the adhesive to the surface of the substrates directly or fill it into the gap, then shine it with UV light..
You'll get long term durability and resistance to moisture, chemicals, oils, and temperature extremes.
Non-toxic after it cures and it is upto the RoHS standard.
Shelf life is one year.
The main technical parameters are as follows:
Heat resistance scope：- 50 °C—+ 350 °C
volume resistance: 1.7×1015Ω.cm sheet resistance 2.5×1015Ω
voltage withstand 28-35.5kV/mm hardness shore D 87
dielectric coefficient:4.1
Tensile strength≥48MPa; bending strength≥103.6 Mpa compressive strength≥223MPa shearing strength≥28.8Mpa
Instruction 1. To get the best results, the two surfaces being bonded should be free of oils, dirt, moisture and other contaminants and should be slightly roughed or sanded to remove gloss.
2. Spray the adhesive on the substrates, put them together and apply some strength on them, expose it to UV light and let it dry
Notes 1. Better to keep the working place well ventilated.
2 .If it has contact with skin, you should wash with soap.
3. It can be stored at well-ventilated places with low temperature, and keep them away from fire. Cover the lip after using it.
Copyright © 2005-2011 Thomas Technology, Inc. All Rights Reserved.
|
|
» Posted by: Thomas Sci Co.,Ltd [China]  |
|
|
|
|
|
[Sell]
thomas high temperature resistant PCB adhesive |
|
|
Name High temperature resistant adhesive used in circuit board soldering（THO4059）
Outline It is one-component epoxy adhesive. It is easy and convenient to use for it cures fast at room temperature and bonds well,
Applications It is applicable to the bonding of metals, the ceramics, the composite materials (PCB) materials working under the hot conditions. It also applies to the bonding, sealing repairing or soldering of electrical heating parts and components.
Features The A component is the tinted thick liquid, non-solid particle. The B component is in tinted paste shape.
Fast curing speed. At 100°C, within 0.45-1 hour, its surface cures, it reaches its maximum bonding strength when cooling down.
Being durable and resistant to ultraviolet light, once the bond has formed.
Being heat-resistant, it adapts to a wide range of temperature and bonds well under high temperature.
Mix the two components in a certain proportion, apply it to the surface of the substrates acquiring no strict treatment, which makes it so convenient to use.
You'll get long term durability and resistance to moisture, chemicals, oils, and temperature extremes.
Non-toxic after solidification, though it is a little smelly.
Shelf life is half a year.
The main technical parameters are as follows:
Temp. resistance scope：-40°C—+380°C
Cementation intensity: room temperature: Tensile strength≥25MPa; Shearing strength≥20 MPa
At 150°C : Tensile strength 3－5 MPa
Instruction 1. To get the best results, the two surfaces being bonded should be free of oils, dirt, moisture and other contaminants and should be slightly roughed or sanded to remove gloss.
2. Spread the mixture on the substrates, put them together and apply some strength on them, finally, heat it for 1 hour at 100℃.
Notes 1. Use another can or container to blend A with B. The tools used to get A and B should be different.
2. A and B should be mixed well.
3. It is necessary to keep it well ventilated and away from fire.
4. If it has contact with skin, you should wash thoroughly with soap and water.
5. It can be stored at well-ventilated places with low temperature, and keep them away from fire.
6. Cover the lip after using it.
Copyright © 2005-2011Thomas Technology, Inc. All Rights Reserved.
|
|
| » Posted by: Thomas Sci Co.,Ltd [China] |
|
|
|
|
|
[Sell]
thomas high temperature resistant thermally conductive adhesive |
|
|
Name Thermally conductive adhesives（THO4074）
Outline This single-component product is denaturalized epoxy adhesive. It is easy and convenient to use for it cures fast when heated and bonds well. Being stable and corona-resistant, it makes it easy to operate with its excellent electrical and mechanical property,
Applications It applies widely in bonding or potting the electric heating chips in capacitor, relay, LED or other industrial apparatus. Due to its excellent heat conductivity, it is superb for bonding substrates with different coefficient of thermal conductivity.
Features Being durable and resistant to ultraviolet light once the bond has formed.
Being heat-resistant, it adapts to a wide range of temperature and bonds well under high temperature.
Mix the two components in a certain proportion, apply it to the surface of the substrates acquiring no strict treatment, which makes it so convenient to use.
You'll get long term durability and resistance to moisture, chemicals, oils, and temperature extremes.
Non-toxic after solidifying, it complies with RoHS standard.
Shelf life is half a year.
The main technical parameters are as follows:
Temp. resistance scope：-48 °C－+450 °C
volume resistivity: 1×1015Ω.cm sheet resistance 2.5×1015Ω
voltage withstand: 20-25kV/mm hardness shore D 75
Cementation intensity: room temperature: Tensile strength≥25MPa;
Shearing strength≥18 MPa 200 °C: Tensile strength 3－5 MPa
280 °C: Tensile strength 1.6－1.9 MPa
Instruction 1. To get the best results, the two surfaces being bonded should be free of oils, dirt, moisture and other contaminants and should be slightly roughed or sanded to remove gloss.
2. Spread the adhesive on the substrates, heat it at the temperature of 100°C for about 60 minutes to foster its curing.
Notes 1. It is necessary to keep it well ventilated and away from fire.
2. If it has contact with skin, you should wash thoroughly with soap and water.
3. It can be stored at well-ventilated places with low temperature, and keep them away from fire.
4. Cover the lip after using it.
Copyright © 2005-2011 Thomas Technology, Inc. All Rights Reserved.
|
|
| » Posted by: Thomas Sci Co.,Ltd [China] |
|
|
|
|
|
[Sell]
thomas teflon conveyor belt adhesive |
|
|
Name High temperature resistant teflon adhesive (cures at room temperature)（THO4096-2）
Outline It is heterocyclic adhesive which cures at room temperature. it is temperature resistant and easy to operate. No bubbles appear after curing thus making the surface smooth and bright.
Applications Because the corrosion-resistant quality of the eteline or teflone, the materials are often used to make pipelines, vessels, bumps and valves. Our adhesive solve the problem of bonding or coating such materials themselves and to metals, alloys which may be used in high frequency communication devices and other devices which works in harsh conditions. These materials include PTFE, TFE, FEP, ETFE, CTFE, E-CTFE, PVF2, PVF, PP, PE and so forth.
Features Component A is transparent liquid, Component B is viscous fluid.
Its surface sets within 8 hours, and it reaches its maximum bonding strength within 36 hours.
It is resistant to shock, ultraviolet light and extreme weather once it cures because it is durable and with good ductility and low contraction coefficient.
Being heat-resistant, it adapts to a wide range of temperature and bonds well under high temperature.
Being moderate in viscosity, the surface appears smooth and bright after curing.
Apply the adhesive to the surface of the substrates directly or fill it into the gap, then heat it...
You'll get long term durability and resistance to moisture, chemicals, oils, and temperature extremes.
Non-toxic after it cures and it is upto the RoHS standard.
Shelf life is half a year.
The main technical parameters are as follows:
Temp. resistance scope：- 52 °C—+220 °C
voltage withstand 20-25kV/mm hardness shore D60
25°C Tensile strength50N/cm; 90°C, tensile strength: 45N/cm 180°C, 42N/cm
Instruction 1. To get the best results, it is better to sand the substrates several times in the clockwise and counterclockwise direction, and then immerse the eteline materials in the liquid “A” specially made by our company for 5 minutes, take them out, wash them clean in the running water, or for the best result, in the distilled water, dry them. Then cleanse the two bonding substrates with liquid “B”. wait till they are dry. bond them in time.
2. Mix A and B in a proportion of 3:1-5:2, stir the mixture well before using.
3. Spray the adhesive on the substrates, put them together and apply some strength on them.
Notes 1. Better to keep the working place well ventilated.
2 .If it has contact with skin, you should wash with soap.
3. It can be stored at well-ventilated places with low temperature, and keep them away from fire. Cover the lip after using it.
Copyright © 2005-2011 Thomas Technology, Inc. All Rights Reserved.
|
|
| » Posted by: Thomas Sci Co.,Ltd [China] |
|
|
|
|
|
[Sell]
thomas high temperature resistant teflon adhesive |
|
|
Name High temperature resistant teflon adhesive (cures at room temperature)（THO4096-2）
Outline It is heterocyclic adhesive which cures at room temperature. it is temperature resistant and easy to operate. No bubbles appear after curing thus making the surface smooth and bright.
Applications Because the corrosion-resistant quality of the eteline or teflone, the materials are often used to make pipelines, vessels, bumps and valves. Our adhesive solve the problem of bonding or coating such materials themselves and to metals, alloys which may be used in high frequency communication devices and other devices which works in harsh conditions. These materials include PTFE, TFE, FEP, ETFE, CTFE, E-CTFE, PVF2, PVF, PP, PE and so forth.
Features Component A is transparent liquid, Component B is viscous fluid.
Its surface sets within 8 hours, and it reaches its maximum bonding strength within 36 hours.
It is resistant to shock, ultraviolet light and extreme weather once it cures because it is durable and with good ductility and low contraction coefficient.
Being heat-resistant, it adapts to a wide range of temperature and bonds well under high temperature.
Being moderate in viscosity, the surface appears smooth and bright after curing.
Apply the adhesive to the surface of the substrates directly or fill it into the gap, then heat it...
You'll get long term durability and resistance to moisture, chemicals, oils, and temperature extremes.
Non-toxic after it cures and it is upto the RoHS standard.
Shelf life is half a year.
The main technical parameters are as follows:
Temp. resistance scope：- 52 °C—+220 °C
voltage withstand 20-25kV/mm hardness shore D60
25°C Tensile strength50N/cm; 90°C, tensile strength: 45N/cm 180°C, 42N/cm
Instruction 1. To get the best results, it is better to sand the substrates several times in the clockwise and counterclockwise direction, and then immerse the eteline materials in the liquid “A” specially made by our company for 5 minutes, take them out, wash them clean in the running water, or for the best result, in the distilled water, dry them. Then cleanse the two bonding substrates with liquid “B”. wait till they are dry. bond them in time.
2. Mix A and B in a proportion of 3:1-5:2, stir the mixture well before using.
3. Spray the adhesive on the substrates, put them together and apply some strength on them.
Notes 1. Better to keep the working place well ventilated.
2 .If it has contact with skin, you should wash with soap.
3. It can be stored at well-ventilated places with low temperature, and keep them away from fire. Cover the lip after using it.
Copyright © 2005-2011 Thomas Technology, Inc. All Rights Reserved.
|
|
| » Posted by: Thomas Sci Co.,Ltd [China] |
|
|
|
|
|
[Sell]
thomas moisture and temperature resistant adhesive |
|
|
Name High temperature and moisture resistant adhesive（THO4095-II）
Outline It is heterocyclic adhesive which cures fast when heated. it is temperature resistant and easy to operate. No bubbles appear after curing thus making the surface smooth and bright. Its viscosity and heat resistant property is adjustable.
Applications It applies to the coating, infiltrating and encapsulating of device surface, electronic components and chips in electric engine, capacitor, thermocouples, transformers, rectifiers, electronic modules LSI and other products to protect them against moisture, chemicals, excessive heat, vibration, mechanical impact and thermal shocks. It also applies to the bonding of metals, alloy, ceramics, glass and transparent compound which work under water or in some humid environment.
Features It is one-component transparent thick liquid.
It cures within one minute when heated with the temperature 120 deg.C for one minute.
It is resistant to shock, ultraviolet light and extreme weather once it cures because it is durable and with good ductility and low contraction coefficient.
Being heat-resistant, it adapts to a wide range of temperature and bonds well under high temperature.
Being moderate in viscosity, the surface appears smooth and bright after curing.
Apply the adhesive to the surface of the substrates directly or fill it into the gap, then heat it...
You'll get long term durability and resistance to moisture, chemicals, oils, and temperature extremes.
Non-toxic after it cures and it is upto the RoHS standard.
Shelf life is one year.
The main technical parameters are as follows:
Temp. resistance scope：- 52 —+ 325deg.C
volume resistance: 1.7×1015Ω.cm sheet resistance 2.5×1015Ω
voltage withstand 28-35.5kV/mm hardness shore D85
dielectric coefficient:4.4
Tensile strength≥35MPa; bending strength≥65 Mpa compressive strength≥175MPa shearing strength≥28.8Mpa shock strength≥17KJ/m*m
Instruction 1. To get the best results, the two surfaces being bonded should be free of oils, dirt, moisture and other contaminants and should be slightly roughed or sanded to remove gloss.
2. Spray the adhesive on the substrates, put them together and apply some strength on them, heat it with 120°C, wait for one minute and let it dry
Notes 1. Better to keep the working place well ventilated.
2 .If it has contact with skin, you should wash with soap.
3. It can be stored at well-ventilated places with low temperature, and keep them away from fire. Cover the lip after using it.
Copyright © 2005-2011 Thomas Technology, Inc. All Rights Reserved.
|
|
| » Posted by: Thomas Sci Co.,Ltd [China] |
|
|
|
|
|
[Sell]
thomas high temperature resistant adhesive |
|
|
Name High temperature resistant adhesive（THO4052）
Outline It is double-component epoxy adhesive. It is easy and convenient to use for it cures fast at room temperature and bonds well,
Applications It is used to bond metals, the ceramics, compound materials working under the hot conditions. It also applies to stop up the leaks, the blocking of the cracks, and the perfecting of the castings, as well as the potting of electrical components or heating parts.
Features Component A is the tinted thick liquid, non-solid particle. component B is in tinted paste shape.
Fast curing speed. At 25 deg.C, its surface cures during the first 3 hours, 18 hours later, it reaches its maximum bonding strength.
Being durable and resistant to ultraviolet light once the bond has formed.
Being heat-resistant, it adapts to a wide range of temperatures and bonds well under high temperature.
Mix the two components in a certain proportion, apply it to the surface of the substrates directly, which makes it so convenient to use.
You'll get long term durability and resistance to moisture, chemicals, oils, and temperature extremes.
Shelf life is half a year.
The main technical parameters are as follows:
Temp. resistance scope：-40－+380 deg.C
Cementation intensity:
At Normal temperature: Tensile strength≥25MPa;
Shearing strength≥20 MPa
At 150 deg.C: Tensile strength 3－5 MPa
Instruction 1. To get the best results, the two substrates being bonded should be free of oils, dirt, moisture and other contaminants, or the substrates should be slightly roughed or sanded to remove gloss.
2. Mix A and B in a proportion of 10:1 to get perfect bonding result.
3. Spread the mixture on the substrates, put them together and apply some strength on them, finally, let them dry for 2-4 hours.
Notes 1. Use another can or container to blend A with B. The tools used to get A and B should be different.
2. A and B should be mixed well.
3. It is necessary to keep it well ventilated and away from fire.
4. If it has contact with skin, you should wash thoroughly with soap and water.
5. It can be stored at well-ventilated places with low temperature, and keep them away from fire.
6. Cover the lip after using it.
Copyright © 2005-2011 Thomas Technology, Inc. All Rights Reserved.
|
|
| » Posted by: Thomas Sci Co.,Ltd [China] |
|
|
|
|
|
[Sell]
Testosterone phenylpropionate |
|
|
Testosterone phenylpropionate
MW： 420.58
CAS： 1255-49-8
Standard: CP
Appearance：white fine powder
Packing:5kg/drum
25kg/drum
|
|
| » Posted by: liaotianfeng [China] |
|
|
|
|
|
[Sell]
Testosterone propionate |
|
|
Testosterone propionate
MW： 344.49
CAS： 57-85-2
Standard: CP
Appearance：white fine powder
Packing:5kg/drum
25kg/drum
|
|
| » Posted by: liaotianfeng [China] |
|
|
|
|
|
[Sell]
Fluoxymesterone |
|
|
Fluoxymesterone
MW： 336.44
CAS： 76-43-7
Standard: USP28
Assay:99%
Appearance：white fine powder
Packing:5kg/drum
25kg/drum
|
|
| » Posted by: liaotianfeng [China] |
|
|
|
|
|
[Sell]
6-Bronmandrostenedione |
|
|
6-Bronmandrostenedione
Characteristics: white to almost white crystalline powder
CAS：38632-00-7
Packing：25kg/drum
|
|
| » Posted by: liaotianfeng [China] |
|
|
|
|
|
[Sell]
4-androstenedione |
|
|
4-androstenedione
MF： C19H26O2
MW： 286.41
CAS： 63-05-8
Appearance:White crystalline powder
Assay:≥99％（HPLC）
(titration)
Packing: 5kg/drum
|
|
| » Posted by: liaotianfeng [China] |
|
|
|
|
|
[Sell]
DHEA |
|
|
DHEA
Dehydroepiandrosterone
CAS NO.：53-43-0
Appearence: White fine powder
Packing:5kg/drum
|
|
| » Posted by: liaotianfeng [China] |
|
|
|
|
|
[Sell]
Letrozole |
|
|
Letrozole
Letrozole
CAS: 112809-51-5
Molecular formula :C17H11N5
Molecular weight:285.31
CAS NO.:112809-51-5
Content:99.6% （HPLC）
Packing:1KG/PP
Appearence: White crystalline powder
Indications:
postmenopausal women with advanced breast cancer, and more for anti-estrogen treatmentafterthefailure of the second-line treatment
|
|
| » Posted by: liaotianfeng [China] |
|
|
|
|
|
[Sell]
viagra |
|
|
viagra
cialis, viagra, Levitra Professional is a reformulated advanced prescription formulation with the highest degree of effectiveness in the sphere of male erectile dysfunction treatment that will result in intense, electrifying orgasms, better time control over ejaculation process and maximized increase in penis width, girth and length.
viagra, pfizer vagra, female viagra, generic viagra, cheap viagra, herbal viagra, wholesale viagra, dropshipping viagra, sildelafil viagra, boxes viagra, bottle viagra, blue pills Pfizer , viagra, cialis, lilly cialis, tadalafil cialis
BAYER Levitra, wholesale levitra, green tea, ketamine, cosmetic, herbal, valium, xanax, igf jintropin hgh, rhgh, mgf, drugs, sex products, ***** enhencement product, enhancer pill, sex enhancer, sex product, health product, male enhancer, ed, herbal medicine, sex enhancement, enhancerment pill, penis enlargement pill, libido, adult product.
Free shipping country include:USA, UK, Australia, Canada , spain, france, Germany and other countries.
We are agency of China EMS and TNT, hongkong EMS, so we can shipping your order safely.and quickly.We can do dropshipping too.
Top quality products, fast shippment , good communication, never lost a chance to improve your business.
1. Factory directly supply, factory price, the cheapest price.
2.Do drop shipping, supply tracking number.
3. Deliver to your door in 5-7 days.
If you are interested in any of our product, please give us a chance to fulfill your requirement
|
|
| » Posted by: liaotianfeng [China] |
|
|
|
|
|
[Sell]
Clomifene citrate |
|
|
Clomifene citrate
Products name: Clomifene citrate
Another name: 2-(4-[2-Chloro-1,2-diphenylethenyl]phenoxy)-N,N-diethylethanamine citrate
(Structural formula:) C26H28ClNO C6H8O7
(Molecular weight:) 598.11
CAS NO.: 50-41-9
Appearance: white or milky white crystalline powder
Use: the goods to anti-estrogen (fertility inducer), the objects in dysfunctional uterine bleeding, polycystic ovary, menstrual disorders and drug-induced amenorrhea and other gynecologic diseases.
Standard: CP USP
|
|
| » Posted by: liaotianfeng [China] |
|
|
|
|
|
[Sell]
Tamoxifen Citrate |
|
|
Tamoxifen Citrate
Products name:Tamoxifen Citrate
Structural formula: C32H37NO8
Molecular weight: 56364
CAS NO: 54965-24-1
Appearance: light yellow or white crystal powder
Use: for the treatment of advanced and recurrent breast cancer and ovarian cancer
Standard: CP2000,USP26
Package: 20KG/Drum, 25KG/Drum, 5kg/Tin
|
|
| » Posted by: liaotianfeng [China] |
|
|
|
|
|
[Sell]
Sidenafil citrate |
|
|
Sidenafil citrate
Product Description
Character: sildenafil citrate, sildenafil, viagra; cure ED(Erectile Dysfunction); 150-180mg/day
Property: white to off-white crystalline powder, odorless, bitter taste, insoluble in water and ethanol.
Function: sildenafil is a drug used to treat erection difficulties, such as erectile dysfunction (ED). Since it first became available in 1998, the prescription drug Sildenafil has helped about 16 million men around the world improve their sex lives. It is a prescription drug that works by increasing blood flow to the penis. It is not a hormone or an aphrodisiac.
Dosage: 150 - 180mg/day.z
Specification:1kg/20kg/100kg are available
|
|
| » Posted by: liaotianfeng [China] |
|
|
|
|
|
[Sell]
Slidenafil mesylate |
|
|
Slidenafil mesylate
Product Description
Charcter：slidenafil mesylate, cure ED, treat impotence, sex incentive, sex product, penile enlargement, small(100-150mg),small side effect, dissolve in the water.
Contents: 99.90%
Functions and use: It is medicine treatment raw material, indicated for the treatment of erectile dysfunction.
Property: it is the ramification of sildenafil, it is white to off-white crystalline powder, odorless, bitter taste, soluble in water and ethanol.
Mechanism: sildenafil mesylate, same as sildenafil is an inhibitor of type 5 -cGMP phosphodiesterase relaxing and smoothing muscle cells of the corpus cavernosum which leads to penile erection. This relaxation may be mediated by nitric oxide via cyclic guanosine monophosphate (cGMP).
Advantage: small dosage, small side effect, dissolve in water and ethanol.
Specification: 1kg/20kg/50kg are available
|
|
| » Posted by: liaotianfeng [China] |
|
|
|
|
|
[Sell]
Vardenafil |
|
|
Vardenafil
Product Description
Contents: 99.90%
Property: vardenafil is white to off-white crystalline powder, odorless, bitter taste, soluble in water and ethanol
Function: Vardenafil was approved by the FDA in August, 2003. It is used to treat erectile dysfunction (impotence; inability to get or keep an erection) in men. It works by increasing blood flow to the penis during sexual stimulation. This increased blood flow can cause an erection.
Dosage: 15 - 20mg/day.
Valid period: 2-3 years
Specification: 1kg/20kg/100kg
|
|
| » Posted by: liaotianfeng [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 next»
|
|
|
