|
|
|
|
|
|
|
[Sell]
Canneed KZJ-SST-2 Secure Seal Tester |
 |
|
KZJ-SST-2 Secure Seal Tester
The "canneed KZJ-SST-2 Secure Seal Tester" is used to test seal integrity on the glass or plastic containers and cans. The KZJ-SST-2 has been designed to address the special needs of sealing cans and bottles that use aluminum roll-on, twist crowns, or plastic caps. The KZJ-SST-2 operates with compressed air, nitrogen, or carbon dioxide. By detecting gas leakage, rather than liquid, the Secure Seal Tester gives more sensitive, accurate readings.
KZJ-SST-2 is constructed from anodized aluminum, stainless steel, and plastic materials. The tester's rugged construction withstands production line abuse, yet is accurate enough for laboratory use.
Technical data (changes reserved):
Measurement range: 0-16 bar
Pneumatic supply: handling up to 200 bar inlet pressure,
Sample capacity : 330 mm height × 150 mm dia. max.
Dimensions: 320 x 380 x 720 mm(W x D x H)
Net Weight: 15 kg |
|
» Posted by: Canneed Instrument (HongKong) Limited [China]  |
|
|
|
|
|
[Sell]
Canneed IDG Can Internal Diameter Gauge |
|
|
Canneed "IDG-100, IDG-200 Can Internal Diameter Gauge"
This unit serves for quickly checking the Internal Diameter of can. It is equipped with a calibration piece.
IDG-100 is for small diameter can ;
IDG-200 is for big diameter can
It is equipped with a digital dial gauge with "reset" and "preset" function, LCD display and data outlet for connecting the unit to a computer via multiplexer, if required.
Technical data (changes reserved):
Resolution: 0,01 mm
Power supply: Battery, SR-44, approx.5.000 h
Accuracy: 0.02mm |
|
| » Posted by: Canneed Instrument (HongKong) Limited [China] |
|
|
|
|
|
[Sell]
Canneed CLT-600 Leak Tester for can |
|
|
The canneed "CLT-600 Leak Tester for can" is used for checking the permeability of 3-piece cans in a water bath. The can is fixed to magnet disc plate and submerged into the water. At the same time it is subjected to pressure and leaks are revealed by air bubbles. End and side seams visible.
A special parallel clamping system enables to measure different diameters and heights with one device. The clamping pressure and the test pressure may be set independantly.
The operator determines the period of time the cans are under water. If he switches the by-pass lever and presses the two button valves, the cans deaerate and are lifted out of the water.The whole test cycle is automated and is pneumatically controlled by pressure regulator valves.
Technical data (changes reserved):
Maximum test pressure: 4 bar
Max. diameter: 130 mm
Max. can height: 300 mm
Bath dimensions: 1500 x 600 x 500 mm (W x D x H)
Dimensions: 1500 x 800 x 800 mm(W x D x H)
Weight: 200 kg |
|
| » Posted by: Canneed Instrument (HongKong) Limited [China] |
|
|
|
|
|
[Sell]
Canneed ELT-100 Leak Tester for End |
|
|
The "Canneed model ELT 100 Leak Tester for End"is used to determine the pressure at which ends buckle. This tester is also used to test for pin hole leaks in the tab score and rivet area.
The ELT 100 applies high pressure air to the product side of and end until the end fails. Leaking spots are made visible by revealing bubbles in the water bath. The failure of an end occurs either when the end buckles or when it starts leaking; leakage is generally caused by faulty scores or rivets.
The ELT 100 is easy to use. The test sample is placed on the Change Part, the water chamber is closed, and pressure is applied to the product side of the end. At some point the end will either buckle or start to leak. The pressure at which the failure occurs can be obtained from the front- panel mounted gauge, which incorporates a lazy hand for easy end failure recording.
Each end diameter or shape requires specially adjusted holders, which can be exchanged easily.
Technical data: (changes reserved)
Pressured air supply : 6 bar min. ,10 bar max
Max. test pressure : 6 bar max (adjustable)
Sample Capacity : 200mm dia max
Pressure gauge Range : 0 -1000 kpa,
Graduation :20 kpa
Dimensions : 600 x 420 x 600 mm L x B x H
Weight :approx.25kg
Water overflow bath size :10L |
|
| » Posted by: Canneed Instrument (HongKong) Limited [China] |
|
|
|
|
|
[Sell]
Canneed AXL-4000 Axial Load Tester |
|
|
The "canneed AXL-4000 Axial Load Tester" measures the axial force resistance of beverage cans in Newton. The can is placed in a support and gradually forced upwards against the pressure plate. The space between the support and the top plate can be altered with spacers. The can crashes after the peak force has been applied that the can is capable of resisting. The maximum value can now be read in the display.
Features
*Industry Standard
*Exceptionally Parallel Platens
*Durable Load Cell Design
*PLC Controlled
*LCD touch-screen Display
*Rs-232 Communications Capability
*Mechanical Overload Protection
*Display the max. and min. measuring value and average after several test.
Technical data (changes reserved):
Measure range: 3000 N
Resolution: 1 N
Rear Panel: RS232 serial output
Power supply: 115 V / 230 V, 50-60Hz
Max. can diameter: 80 mm
Max. can height: 160 mm
Dimensions: 500 x 400 x 600 mm (W x D x H )
Weight: 50 kg |
|
| » Posted by: Canneed Instrument (HongKong) Limited [China] |
|
|
|
|
|
[Sell]
Canneed EBT-100 Buckle Tester For Loose Ends |
|
|
The Canneed "EBT-100 Buckle Tester for loose ends" determines the exact pressure at which the end buckles. Any end of varying diameter may be tested: chang parts are available that can be exchanged within seconds.
The loose ends is placed in the holder. By the ring-like laying-on device the end is being fixed in its circumference. Close the door, Depress the "start" button. The "EBT-100 Buckle Tester" clamps the end firmly and thightly. Fast pressure increase up to 5 bar (programmable to just bellow the expected buckle value), from there the "speed of pressure increase" may be set within the device. The test is terminated as soon as the end buckles. The maximum pressure value is shown in the display.
Thus very constant results may be achieved which are independent from a later seam process. In comparison to seamed ends the results differ by 0.3 to 0.8 upwards.
Feature:
*Industry Standard
* suit any end of varying diameter
* with piston supercharger, doubled the Pneumatic supply
*Program Logic Control System (PLC) Controlled
*LCD touch-screen Display
*Rs-232 Communications Capability
* Overload Protection
*Test Point For Calibration
*"speed of pressure increase" may be set
*display the max. and min. measuring value and average after several test.
Technical data (changes reserved):
Measure range: 0-900 Kpa
Resolution: 1 Kpa
Rear Panel: RS232 serial output
Power supply: 115/230V/50-60Hz
Pneumatic supply: 5bar
Max. can diameter: 80 mm
Max. can height: 160 mm
Dimensions: 520 x 460 x 750 (W x D x H )
Weight: 50 kg
|
|
| » Posted by: Canneed Instrument (HongKong) Limited [China] |
|
|
|
|
|
[Sell]
Canneed Flange width gauge |
|
|
The Canneed "FWG-100-d Flange width gauges" is designed to measure the flange width of open ended cans.The spring loaded can guides automatically position the can for fast, accurate, and repeatable measurements. Constructed of machined for corrosion resistance and long life. The base plate is stainless steel to extend the wear life of the surface. With the Mitutoyo 0.01mm Resolution Digital Indicator. The gauges may be connected to a computer via a multiplexer.
Technical data (changes reserved):
Resolution: 0,01 mm
Sample Capacity
FWG-100-d: 50-90mm dia.
FWG-200-d: 50-200mm dia.
FWG-300-d: 50-300mm dia. bigger by order |
|
| » Posted by: Canneed Instrument (HongKong) Limited [China] |
|
|
|
|
|
[Sell]
Manual heat fusion marking machine YL-306 |
|
|
Technical Parameter:
1.Dimensions:1200*800*1100mm
2.paint weight:100kg
3.marking width:100,150,200,250,300mm
4.marking speed:500-1000m/h
5.weight of the whole mahchine:120kg
The manual hot melt marking machine is specialized equipment for traffic marking and is used for highway ,urban road, dotted line, curve, guide arrow, and letters of hot melt reflective marking.The product is of compactness,flexible operation,handy use,freely close, regular line, and even application integrating the advantages of domestic and overseas similar products with measurable glass bead spreader, even beads, and adjustable glass bead spreader by gravity, as well as specail formula for the rubber wheel which is of antifriction agine resistance and high-temperature resistance.
|
|
| » Posted by: Youline Traffic Facilities Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Self-propelled heat fusion marking machine ZX-100 |
|
|
Technical Parameter:
1.Dimensions:1150*1150*850mm
2.weight of complete machine:200kg
3.power:4.0hp
4.volume of mixer hopper:100kg
5.sashay speed:0-5m/h
6.marking width:100,150,200,300mm
7.supporting coating(matching):100,200,300mm
8.glass bead spreader:quatitative ajustable:100,150,200,300mm
9.liquefied gas storage tank:15kg of standard tank
|
|
| » Posted by: Youline Traffic Facilities Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Vibration marking machine ZD-100 |
|
|
Technical Parameter:
1.mension of vibration marking machine:1360*900*1100mm
2.weight:265kg
3.capacity of paint basket:120kg(60L)
4.beading box volume:10kg
5.engine:HONDA liquefled engine, OHV4 stoke
6.engine power:163cc; 5.5HP
7.fule:LGP dry gas
8.movement driving model:automatic oil-pressured stepless speed changnig
9.moving speed:>400m/h
10.largest slope allowed:15°
11.height of prominence:3-5mm
12.width of marking:150/200/300mm
|
|
| » Posted by: Youline Traffic Facilities Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Zenra crossing heat fusion marking machine BM-100 |
|
|
Technical Parameter:
1.dope bucket:the combination of dipe bucket and road marking scoop,hanging in the underpan of the frame, board scraping structure.
available capacity of the fitter net:50kg
2.bedaing box:hand movement in step clutch, gear cylce, rolling sowing, and disassembly design
3.rubber wheel:cast-iron sector made of special wear resistant rubber
4.width of the index line:400/450mm it can be customized according to the requirements of the project
5.size and weight:1250*760*900mm
6.net weight:90kg
|
|
| » Posted by: Youline Traffic Facilities Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Hydraulic double cylinder pre-heater YL-100 |
|
|
Technical Parameter:
1.Engine:16.5PS electric started boiling diesel of water-cooling
2.hydraulic driving system:Integrated multiplex hydraulic control valve forward and reverse stir and stepless speed changing
3.Lic motor:model BM
4.Cubage of hydraulic gasline box :70L
5.Capacity of Kettle cylinder:360kg*2
6.Structure:Frame structure, insulation is fixed between internal bladder and ektexine
7.Heating syatem: petroleum dry gas(50kg per jar commended )and imported highly efficient four-ring burner
8.Ssfty facility:Flooding facility of overload is designed for it to prevent maloperation.
9.Dimension and weight: 1800*1500*1600mm
10.Net weight: 700kg
Hydraulic double cylinder fusing kettle is the major equipment for fusing marking.Integrated multiplex hydraulic driving and stepless speed changing are adopted in the equipment which guarantee big pitch of strand loaded operation and excellent function.It features forward and reverse stir.Imported energy-saving burner of four-ring fire is also adopted to make sure the burning efficiently. The equipment boosts efficient fusing,long continous working hours friendly-using, saving time and easy maintenance.
|
|
| » Posted by: Youline Traffic Facilities Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Carrousel splitting foam cutting machine BC1032 |
|
|
Carrousel splitting foam cutting machine BC1032
Model BC1032-60 BC1032-70
Cutting foam size W1.5×L2×H1.2m(4pcs) W1.5×L2×H1.2m(5pcs)
Cutting faom size max W1.5×L2×H1.2m(4pcs) W1.15×L2×H1.2m(5pcs)
Total power 7.94KW 8.74
Worktable turning speed 0－3.5r/min 0－3.5r/min
Blade length 8940mm 10000mm
Work table dia Φ6m Φ7m
Cutting thickness 2-150mm 2-150mm
Machine weight 3300kg 3500kg
Machine external size max (L*W*H) W7.5m×L6m×H2.5m W8.5m×L7m×H2.5m
The machine adopts the advanced imported imported controlled techniques drive.this machine is mostly used for many quadrate foam once flatly slicing .It’s fully automatic controlled operation and the cutting is accurat. It can be continuously cutout .It’s dependability is lofty and production efficiency is better (This machine choose with vacuum quipments)
|
|
| » Posted by: shenzhen bei chuan machinery co.,ltd [China] |
|
|
|
|
|
[Sell]
Argon Arc Welding Wire |
|
|
Argon arc welding wire is made by advanced surface cleaning and copper coating technology.
The welding wire surface is smooth and clean, the copper coating layer is uniform and firm. With new model rust-proof materials, it offers excellent anti-rust performance. With closed packaging the welding wire can keep the color and a long time rust proof.
The wire is arranged using precision winding technology and offers good welding property with good electric arc stability, small spatter, moderate stiffness, smooth transporting of wire, flat welding seams and high efficiency. Argon arc welding wire is suitable for full range welding of semi automatic and fully automatic operation.
Argon arc welding wire is mainly used in low-carbon steel alloy, in welding of vehicles, bridge engineering, engineering machinery, steel components, shipbuilding, container and other industries. Our products have been exported to the Middle East, the United States and Europe and other countries with high praises from customers.
|
|
| » Posted by: TigSure Welding Wire Factory [China] |
|
|
|
|
|
[Sell]
Stainless Steel Welding Wire |
|
|
Stainless steel welding wire as the filling metals for welding, with added elements, works in certain degree to protect the welding seams and promote the melting of the wire and the basic metals.
This type of welding wire keeps the metal property of its stainless steel itself. The welding wire has more elements than steel wire and can add the burned metal elements caused by welding during the process, hence to make the joints with the same property with its base materials.
Stainless Steel Welding Wire Technical Info:
Grade: ER307,ER308,ER308L,ER309,ER309L,ER310,ER316,ER316L
Delivery condition:
Core wire in coil size: 2.0mm,2.5mm,3.2mm,4.0mm,5.0mm,6.0mm
Core wire in fixed length size: 2.0mm--6.0mm length: 350mm or customer's request
TIG wire in 1000mm length box pakage: 5.0kg or customer's request
MIG wire 1.2mm,1.6mm in standard spool & weight
Technical standards as per AWS related standards.
|
|
| » Posted by: TigSure Welding Wire Factory [China] |
|
|
|
|
|
[Sell]
Welding wire |
|
|
Welding wire is used as metal filling stuff or at the same time as metal wire welding materials for electric conduction. In gas welding and tungsten pole gas shielded arc welding, the welding wire is used as filling metal; in submerged arc welding, electroslag welding, and other melting pole gas shielded arc welding, the wire works both as filling metal also conductive electrodes. Welding wire can be divided into three categories. The wire surface does not require flux for anti- oxidation.
1.Rolled Welding Wire. Most welding wire falls into this category, including carbon steel wire, low-alloy steel wire, alloy structural steel wire, stainless steel wire and nonferrous metal wire, etc.
2.Casting Welded Wire. Some alloys, such as cobalt-chromium-tungsten alloy can not be made by forging, rolling, and drawing, can only be made by casting. Casting welding wire is mainly used for manual welding workpiece surface in order to meet special property requirements such as anti-oxidation, anti-wear and high temperature corrosion resistance, and other special performance requirements. Use of continuous casting and liquid extrusion can produce up to a few meters of cobalt chromium tungsten wire, tungsten wire for automatic filling gas shielded arc welding, in order to enhance welding efficiency and quality of cladding layer, while also improving the working conditions.
3.Flux-cored welding wire. A thin strip rolled into round or shaped steel tubing, with the filling of powder of certain extent, then into seam flux cored welding wire through drawing, or seamless flux-cored welding wire with tubes filling completely with powders. Welding with this wire has good welding deposition efficiency, good adaptability of steel and wide range of uses. This wire is mainly used for carbon dioxide gas shielded welding, submerged arc and electroslag welding. The powder flux cored wire electrode composition contains slag, building gas and solid components of the flux-cored wire arc welding without shielding gas. The self-shielded flux-cored wire is suitable for large welded structure and the construction works. |
|
| » Posted by: TigSure Welding Wire Factory [China] |
|
|
|
|
|
[Sell]
Dismantling Joint |
|
|
Flange Adaptor, Coupling, Dismantling Joint
Key products: Flange Dismantling, Flange Adaptor,Flexible Coupling
Size: DN65-DN2000
Material: Carbon Steel;GGG40;GGG50
Pressure: PN6,PN10,PN16,PN25.
Connection: DIN2576,BS4504 PN16,ANSI B16.5.
You can refer to http://www.unicflow.com for detail specifications.
|
|
| » Posted by: Huihua Fittings [China] |
|
|
|
|
|
[Sell]
Rubber Expansion Joint |
|
|
Rubber Expansion Joint
"Key products: Rubber Expansion Joints Single Sphere rubber expansion joint, Double Sphere rubber expansion joint, BSP Threaded Union rubber expansion joint.
"
Size: DN32-DN600
Material: EPDM,NBR,NR,Silicon.
Pressure: PN10,PN16,PN25.
Connection: DIN2576,BS4504 PN16,ANSI B16.5,BSP Thread
You can refer to http://www.unicflow.com for detail specifications.
|
|
| » Posted by: Huihua Fittings [China] |
|
|
|
|
|
[Sell]
Ductile Iron Pipe Fittings |
|
|
BS EN545 Ductile Iron Pipe Fittings
Key products: Flange Spigots,Flanged Sockets,Double Flanged Bends,Double Flanged Taper,Double Socket Bends,Double Socket Taper,All Flanged Tees,All socket tees,Double Socket Tee with Flanged Branch
Design: BS EN545,EN598;ISO2531;BS4772
Size: DN80-DN1600
Pressure: PN10,PN16,PN25.
Material: Ductile Iron GGG40,GGG50
Type of connection: Push-on Joint & Flange Joint
Internal lining: Cement Mortar Lined according to ISO 4179 .
External Coating:Black Bitumen Coated or Blue Fusion Bonded Epoxy Coated as specified.
You can refer to http://www.unicflow.com for detail specifications.
|
|
| » Posted by: Huihua Fittings [China] |
|
|
|
|
|
[Sell]
Sell grinder mill,milling machine,mills of Zenith |
|
|
http://www.zenithcrusher.com
lilian@zenithdream.com
grinder mill is a leading world level industrial mill.grinder mill is designed by our engineers and technical workers, basing on many years’ industrial mill research, and adopting world leading powder processing technology. grinder mill adopts numbers of national patent of mill, such as trapezium working surface, flexible connection, roll linked pressure boost, etc. grinder mill has completely overcome traditional mill’s defect in application, capacity, fineness, energy consumption, service life, etc. And grinder mill is the ideal substitute of traditional mill, such as Raymond mill, high pressure suspension mill, ball mill, etc. Nowadays, grinder mill has widely used in metallurgy industry, electric power industrial, chemical, building, steel industry, coal industry, etc. And grinder mill has achieved large economic benefits and social benefits.
Application
grinder mill is widely used in many industrial, such as building, chemical, chemical fertilizer, metallurgy, mining, nonmetal, abrasive, bearing materials, ceramic, steel, thermal power, bricks & tiles, coal industry, etc. grinder mill can grind these materials which are 9 or less on the Mohs scale, and moisture is below 6%., and they should be nonexplosive and nonflamable mining materials. The final size can be adjusted from 30 to 400 meshes easily. There are thousands materials our machine can grind. The typical materials are cement (raw meal and cement clinker), quartz, feldspar, calcite, gypsum, limestone, dolomite, graphite, fluorite, aedelforsite, phosphate ore, fused calciummagnesium phosphate, carbamide, electrolytic manganese metal, ferromanganese, coal, gangue, slag, zirconium, steatite, granite, orthoclase, marble, barytes, ceramic
|
|
| » Posted by: Shanghai Zenith Electric Power Equipment Co., Ltd. [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 next»
|
|
|
