|
|
|
|
|
|
|
[Sell]
Stainless Steel Pipes |
 |
|
Catering to the demands of different industries, our wide assortment of stainless steel pipes has earned us high reputation from our clients. These stainless steel pipes are manufactured by us using superior quality steel, which is procured by us from certified vendors of the market. Due to their precision dimensions and high functionality, these stainless steel pipes are largely used in different worldwide industries.
Features:
• Made from super grade stainless steel
• Resistant to corrosion
• Customization available
• Hardness
• Easy installation |
|
» Posted by: Joyti Divya Fabrication Ltd. [India]  |
|
|
|
|
|
[Sell]
Perforated Metal Screen |
|
|
Perforated metal panels and screens for architecture can be used as balcony, partitions, façade, elevator cabinet and other parts of buildings.
Materials: Stainless steel sheets, aluminum or galvanized iron sheets.
Specify the following when order:
Materials;
Hole pattern;
Open area;
Strength;
Hole size and thickness.Typical patterns for perforated screen include slotted, embossed, diamond, square and round.Slotted perforated metal is produced in ferrous materials in plates, stainless steel or galvanized steel.
Oblong Slotted Perforated Metal Screen Information:
3.175 x 25.400 mm oblong slot
6.350 mm centers
Side Staggered
43% open
22 gauge steel
Length of oblong slots run length of sheet.
1/4" Slotted Perforated Metal Screen
6.350 x 38.100 mm slot
Every third bridge 4.763 mm wide
Other bridges 2.381 mm
67% open area of sheets
16, 18, 20 gauge steel
Length of slots runs width of perforated sheet.
Mesh sizes and plate thickness typical available:
Ф DE 1.2X5 D/C 7 X 7.5mm
Ф DE 2X14 D/C 14X21mm
Ф DE 2.5x20 D/C14X25mm
To:
Ф DE 5X20X D/C 16X44mm
Ф DE 8X20 D/C 25X46mm
Custom orders with gauges and sizes available.
|
|
» Posted by: Blatt Perforated Metal Co. [China]  |
|
|
|
|
|
[Sell]
Sell Steel Measuring Tapes |
|
|
Keywords:
Measuring Tape
Tape Measure
Measure Tape Supplier
Steel Measuring Tape
Ruler, 5 Metres x 3/4 inches
Promotional Measure Tapes
Gift Measure Tapes
Steel Tape, Hand Tools
China Measuring Tape Supplier.
Measuring Tape - 5M
HS Code: 90178000
Item No.: HW01001
Blade Size: 5M x 19mm
Graduation Type: In/Ft, Metric.
Certificates: EEC Standard Class-II
Material: Steel blade + ABS case
Descriptions: With belt-clip, stopper, and sling strap. Automatic rewind. Easy to lock and release. Perfect for promotion.
Imprint: LOGO printing available.
Packing: Each in a polybag, 12pcs per whitebox, 10 boxes per master carton.
Qty/CNT: 120pcs
G.W. / N.W.: 19 / 18 kg
Meas.: 45 x 24 x 31.5 cm
We are also specialized in OEM/ODM orders; Just give us your specific requirements and picture, we can make almost all kinds of measuring tapes for you.
Mr. Eddy Xiao
----------------------------
Waynex Industrial Company Limited
Address: 36 Fuqiao Rd. Ningbo 315000 China
Tel: +86 574 8736 2428
Fax: +86 574 8736 5498
Mobile: +86 159 5828 5395
Email: waynexco@gmail.com
Skype: xiaozuwei
MSN: waynexco@hotmail.com
http://www.waynex.com
|
|
| » Posted by: Waynex Industrial Company Limited [China] |
|
|
|
|
|
[Sell]
wire nails from wirenails.net |
|
|
BWG Wire Nails Co. provides quality iron wire processed nail products, used for general purpose applications as fasteners. Products include Roofing Nails, Fetter Ring Shank Iron Nails, Concrete Steel Nails, Flat Head Panel Pins, Shoot Nails, Common Round Iron Nails, Annular Thread Ring Shank Nails, Fine Iron Nails, Finishing Nails, Iron Brad Nails, Shoe Iron Tacks, Galvanized Iron Square Boat Nails, etc.
Finish can be: Polished, vinyl plated, blued, phosphated, hot dipped galvanized, temper hardened, electro galvanized or color painted.
Collated coil nails are used in the industries of wood furniture, architecture, board package and fitment. Especially for the binding of batch woodwork and the parts which are not easy to be operated by manual hammer. It is the ideal successor to traditional manual bulk nail.
Features:
Collated coil nails can save time and labor;
It has strong penetrating power, beauty and long duration;
Using of coil nails can reduce labor intensity and improve production efficiency. Commonly, its efficiency is 30 times of that of manual operation.
　
Wire Coil Nails Technical Info:
Wire Diameter Available: 0.083", 0.099", 0.113", 0.120", 0.131"
Nail Length: 1-1/4" to 3-1/2"
Nail Shank Types: Smooth, screw, ring
Finish: Bright, vinyl coated, electro galvanized
Angle: 16 degree, 15 degree, 10 degree, 0 degree
Winding: Flat, conical
Nails: 200-400pcs/coil
Package: 20-60 coils/ ctns, 24-40ctns / pallet
Roofing Coil Nails Technical Info:
Angle: 15 degree flat or 16 degree conical.
Wire Diameter: 0.120"
Nail Length: 3/4" 7/8" 1" 1-1/4" 1-1/2" 1-3/4"
Shanks Type: Smooth.
Point: Diamond.
Finish: Bright, electro galvanized
Plastic Sheet Coil Nails Technical Info:
Angle: 15 degree flat or 0 degree flat.
Diameter: 0.113" 0.120" 0.131"
Nail Length: 50mm-100mm
Shanks: Smooth, screw, ring.
Point: Diamond.
Finish: bright, electric galvanized
http://www.wirenails.net |
|
| » Posted by: BWG Wire Nails Co. [China] |
|
|
|
|
|
[Sell]
concrete nails |
|
|
Flat and countersunk head, diamond point, smooth shank and flut shank.
Concrete nails application:
Concrete nails are widely used for concrete walls, stone and masonry structure and other building construction purpose.
Concrete nails packing:
(1). In small box of 100 pcs each, 10 such boxes in a medium box, then several of which in a carton.
(2). In small box of 1kg each, 20 boxes in a carton.
(3). Loose in carton of 20/25kgs net.
BWG supplies steel finishing nails (headless nails) ranges from 16 to 125mm.
Technical Info: Cupped head, smooth shank, diamond point, polished surface.
Finish: Bright or electro galvanized
Uses: Headless finishing nails are used for furniture-making, interior or exterior upholstery.
BWG supplies flat coutersunk head cement nails.
Technical Info:
Head: Flat, countersunk type
Point: Diamond type
Shank: Smooth, Fluted, Twisted, Spiral.
Finish: Bright, Eletro Galvanized, Blacked, Blue
Size: Length 1"-4"; Wire Nail Dia. 2mm-4.2mm.
Available in countersunk, checkered or plain head, diamond point, polished.
Application: Common round iron wire nails are used for general construction purpose, wooden cases and furniture.
　
Technical Info:
Commodity Name: Common Nails
Materials: Galvanized steel
Specifications: 3/8"-6", BWG4-20 for all kinds of round nails.
Packing: In wooden cases of 112lbs consisting of 16 packets x 7lbs net each. Or in cartons of 25kg net, or 20kg net, both palletized.
Collated coil nails are used in the industries of wood furniture, architecture, board package and fitment. Especially for the binding of batch woodwork and the parts which are not easy to be operated by manual hammer. It is the ideal successor to traditional manual bulk nail.
Features:
Collated coil nails can save time and labor;
It has strong penetrating power, beauty and long duration;
Using of coil nails can reduce labor intensity and improve production efficiency. Commonly, its efficiency is 30 times of that of manual operation.
　
Wire Coil Nails Technical Info:
Wire Diameter Available: 0.083", 0.099", 0.113", 0.120", 0.131"
Nail Length: 1-1/4" to 3-1/2"
Nail Shank Types: Smooth, screw, ring
Finish: Bright, vinyl coated, electro galvanized
Angle: 16 degree, 15 degree, 10 degree, 0 degree
Winding: Flat, conical
Nails: 200-400pcs/coil
Package: 20-60 coils/ ctns, 24-40ctns / pallet
Roofing Coil Nails Technical Info:
Angle: 15 degree flat or 16 degree conical.
Wire Diameter: 0.120"
Nail Length: 3/4" 7/8" 1" 1-1/4" 1-1/2" 1-3/4"
Shanks Type: Smooth.
Point: Diamond.
Finish: Bright, electro galvanized
Plastic Sheet Coil Nails Technical Info:
Angle: 15 degree flat or 0 degree flat.
Diameter: 0.113" 0.120" 0.131"
Nail Length: 50mm-100mm
Shanks: Smooth, screw, ring.
Point: Diamond.
Finish: bright, electric galvanized
http://www.wirenails.net |
|
| » Posted by: BWG Wire Nails Co. [China] |
|
|
|
|
|
[Sell]
common round iron nails |
|
|
Available in countersunk, checkered or plain head, diamond point, polished.
Application: Common round iron wire nails are used for general construction purpose, wooden cases and furniture.
　
Technical Info:
Commodity Name: Common Nails
Materials: Galvanized steel
Specifications: 3/8"-6", BWG4-20 for all kinds of round nails.
Packing: In wooden cases of 112lbs consisting of 16 packets x 7lbs net each. Or in cartons of 25kg net, or 20kg net, both palletized.
Collated coil nails are used in the industries of wood furniture, architecture, board package and fitment. Especially for the binding of batch woodwork and the parts which are not easy to be operated by manual hammer. It is the ideal successor to traditional manual bulk nail.
Features:
Collated coil nails can save time and labor;
It has strong penetrating power, beauty and long duration;
Using of coil nails can reduce labor intensity and improve production efficiency. Commonly, its efficiency is 30 times of that of manual operation.
　
Wire Coil Nails Technical Info:
Wire Diameter Available: 0.083", 0.099", 0.113", 0.120", 0.131"
Nail Length: 1-1/4" to 3-1/2"
Nail Shank Types: Smooth, screw, ring
Finish: Bright, vinyl coated, electro galvanized
Angle: 16 degree, 15 degree, 10 degree, 0 degree
Winding: Flat, conical
Nails: 200-400pcs/coil
Package: 20-60 coils/ ctns, 24-40ctns / pallet
Roofing Coil Nails Technical Info:
Angle: 15 degree flat or 16 degree conical.
Wire Diameter: 0.120"
Nail Length: 3/4" 7/8" 1" 1-1/4" 1-1/2" 1-3/4"
Shanks Type: Smooth.
Point: Diamond.
Finish: Bright, electro galvanized
Plastic Sheet Coil Nails Technical Info:
Angle: 15 degree flat or 0 degree flat.
Diameter: 0.113" 0.120" 0.131"
Nail Length: 50mm-100mm
Shanks: Smooth, screw, ring.
Point: Diamond.
Finish: bright, electric galvanized
BWG supplies quality roofing nails for binding of drywall to wood to secure the shingles.
Technical Info:
Nail Head Size(mm): 14mm/18mm/20mm/24mm
Head Type: Umbrella head, flat head
Roofing Nails Shank Type: Smooth shank, twisted shank
Finish: Galvanized, hot dipped
Specification:
1-1/2 x BWG8-BWG13
1-3/4 x BWG8-BWG13
2x BWG8-BWG13
2-1/2x BWG8-BWG11
1-1/2" - 3" x BWG 5-13
Packing: In carton of 20kg-25kg net each. Or in wooden case of 112lbs each, consisting of 16packets x 7lbs net each.
Uses: Roofing nails are mainly used for roofing, insulation and siding
http://www.wirenails.net |
|
| » Posted by: BWG Wire Nails Co. [China] |
|
|
|
|
|
[Sell]
Collated Coil Wire Nails |
|
|
board package and fitment. Especially for the binding of batch woodwork and the parts which are not easy to be operated by manual hammer. It is the ideal successor to traditional manual bulk nail.
Features:
Collated coil nails can save time and labor;
It has strong penetrating power, beauty and long duration;
Using of coil nails can reduce labor intensity and improve production efficiency. Commonly, its efficiency is 30 times of that of manual operation.
Wire Coil Nails Technical Info:
Wire Diameter Available: 0.083", 0.099", 0.113", 0.120", 0.131"
Nail Length: 1-1/4" to 3-1/2"
Nail Shank Types: Smooth, screw, ring
Finish: Bright, vinyl coated, electro galvanized
Angle: 16 degree, 15 degree, 10 degree, 0 degree
Winding: Flat, conical
Nails: 200-400pcs/coil
Package: 20-60 coils/ ctns, 24-40ctns / pallet
Roofing Coil Nails Technical Info:
Angle: 15 degree flat or 16 degree conical.
Wire Diameter: 0.120"
Nail Length: 3/4" 7/8" 1" 1-1/4" 1-1/2" 1-3/4"
Shanks Type: Smooth.
Point: Diamond.
Finish: Bright, electro galvanized
Plastic Sheet Coil Nails Technical Info:
Angle: 15 degree flat or 0 degree flat.
Diameter: 0.113" 0.120" 0.131"
Nail Length: 50mm-100mm
Shanks: Smooth, screw, ring.
Point: Diamond.
Finish: bright, electric galvanized
BWG Wire Nails Co. provides quality iron wire processed nail products, used for general purpose applications as fasteners. Products include Roofing Nails, Fetter Ring Shank Iron Nails, Concrete Steel Nails, Flat Head Panel Pins, Shoot Nails, Common Round Iron Nails, Annular Thread Ring Shank Nails, Fine Iron Nails, Finishing Nails, Iron Brad Nails, Shoe Iron Tacks, Galvanized Iron Square Boat Nails, etc.
Finish can be: Polished, vinyl plated, blued, phosphated, hot dipped galvanized, temper hardened, electro galvanized or color painted.
BWG supplies flat coutersunk head cement nails.
Technical Info:
Head: Flat, countersunk type
Point: Diamond type
Shank: Smooth, Fluted, Twisted, Spiral.
Finish: Bright, Eletro Galvanized, Blacked, Blue
Size: Length 1"-4"; Wire Nail Dia. 2mm-4.2mm.
Technical Info:
Nail diameter: #6, 7, 8, 10.
Nail length: From 13mm or 1/2 inches to 254mm or 10 inches
Material: C1022
Finish: Black, yellow zinc coated, blue plated, etc.
Head type: Pan, bugle, etc.
Thread type: Coarse or fine
Drive: Philips
Packing: In bulk or small packing according to the customers requirements.
http://www.wirenails.net |
|
| » Posted by: BWG Wire Nails Co. [China] |
|
|
|
|
|
[Sell]
galvanized square boat nail |
|
|
Technical Info:
Materials: Galvanized steel or copper coated
Shank Type: Square
Head: Conical Type
Uses: Commonly used in making of wood boat, etc.
Duplex head nails description:
Double headed, smooth shank, diamond shank, bright finish.
Duplex head nails application: Duplex head nails are used for temporary construction, such as form work or scaffolding. The double head on this nail makes it easy to pull out when forms or scaffolding are torn down.
Duplex Head Nails Size:BWG supplies quality roofing nails for binding of drywall to wood to secure the shingles.
Technical Info:
Nail Head Size(mm): 14mm/18mm/20mm/24mm
Head Type: Umbrella head, flat head
Roofing Nails Shank Type: Smooth shank, twisted shank
Finish: Galvanized, hot dipped
Specification:
1-1/2 x BWG8-BWG13
1-3/4 x BWG8-BWG13
2x BWG8-BWG13
2-1/2x BWG8-BWG11
1-1/2" - 3" x BWG 5-13
Packing: In carton of 20kg-25kg net each. Or in wooden case of 112lbs each, consisting of 16packets x 7lbs net each.
Uses: Roofing nails are mainly used for roofing, insulation and sidingTechnical Info:
Nail diameter: #6, 7, 8, 10.
Nail length: From 13mm or 1/2 inches to 254mm or 10 inches
Material: C1022
Finish: Black, yellow zinc coated, blue plated, etc.
Head type: Pan, bugle, etc.
Thread type: Coarse or fine
Drive: Philips
Packing: In bulk or small packing according to the customers requirements.
BWG supplies steel finishing nails (headless nails) ranges from 16 to 125mm.
Technical Info: Cupped head, smooth shank, diamond point, polished surface.
Finish: Bright or electro galvanized
Uses: Headless finishing nails are used for furniture-making, interior or exterior upholstery.
http://www.wirenails.net |
|
| » Posted by: BWG Wire Nails Co. [China] |
|
|
|
|
|
[Sell]
Duplex Head Nails |
|
|
Duplex head nails description:
Double headed, smooth shank, diamond shank, bright finish.
Duplex head nails application: Duplex head nails are used for temporary construction, such as form work or scaffolding. The double head on this nail makes it easy to pull out when forms or scaffolding are torn down.
Duplex Head Nails Size:
BWG supplies quality roofing nails for binding of drywall to wood to secure the shingles.
Technical Info:
Nail Head Size(mm): 14mm/18mm/20mm/24mm
Head Type: Umbrella head, flat head
Roofing Nails Shank Type: Smooth shank, twisted shank
Finish: Galvanized, hot dipped
Specification:
1-1/2 x BWG8-BWG13
1-3/4 x BWG8-BWG13
2x BWG8-BWG13
2-1/2x BWG8-BWG11
1-1/2" - 3" x BWG 5-13
Packing: In carton of 20kg-25kg net each. Or in wooden case of 112lbs each, consisting of 16packets x 7lbs net each.
Uses: Roofing nails are mainly used for roofing, insulation and siding
BWG supplies shoot nails ranges from wire diameter: 3.2mm - 3.7mm
Nail Length: 32mm, 42mm, 52mm, 62mm, 72mm
Packing: According to customers’ requirements.
We supply shoot nails in various sizes.
Using of brad head nails greatly reduces the possibility of splitting when used in hard or brittle timber. This kind of nail is ideal for general joinery.
Features:
Small head allows for countersinking below wood surface for later filling to give smooth finished appearance. Brad head nails do not turn after driving. It only leaves a small hole for filling.
Technical Info:
Nails Length: 2"
Size: 6d
Bright finish.
Cupped brad head, smooth shank and diamond point.
Used on interior finish carpentry and trim.
http://www.wirenail.net |
|
| » Posted by: BWG Wire Nails Co. [China] |
|
|
|
|
|
[Sell]
Concrete Nails |
|
|
Flat and countersunk head, diamond point, smooth shank and flut shank.
Concrete nails application:
Concrete nails are widely used for concrete walls, stone and masonry structure and other building construction purpose.
Concrete nails packing:
(1). In small box of 100 pcs each, 10 such boxes in a medium box, then several of which in a carton.
(2). In small box of 1kg each, 20 boxes in a carton.
(3). Loose in carton of 20/25kgs net.
Using of brad head nails greatly reduces the possibility of splitting when used in hard or brittle timber. This kind of nail is ideal for general joinery.
Features:
Small head allows for countersinking below wood surface for later filling to give smooth finished appearance. Brad head nails do not turn after driving. It only leaves a small hole for filling.
Technical Info:
Nails Length: 2"
Size: 6d
Bright finish.
Cupped brad head, smooth shank and diamond point.
Used on interior finish carpentry and trim.
BWG supplies steel finishing nails (headless nails) ranges from 16 to 125mm.
Technical Info: Cupped head, smooth shank, diamond point, polished surface.
Finish: Bright or electro galvanized
Uses: Headless finishing nails are used for furniture-making, interior or exterior upholstery.
Technical Info:
Cut masonry nail is made of high-quality low-carbon-steel
Finish: Electric galvanized, hot dipped galvanized, blunt point and tapered shank reduce splitting
Sizes of Masonry Nail: 1"-4", 3d-20d
Packing: Bulk, box, bag, or according to customers’ requests
Uses: Cut masonry nail is mainly used for attaching wood to hinder block, mortar joints, brick walls, and fresh concrete |
|
| » Posted by: BWG Wire Nails Co. [China] |
|
|
|
|
|
[Sell]
Galvanized Roofing Nails |
|
|
BWG supplies quality roofing nails for binding of drywall to wood to secure the shingles.
Technical Info:
Nail Head Size(mm): 14mm/18mm/20mm/24mm
Head Type: Umbrella head, flat head
Roofing Nails Shank Type: Smooth shank, twisted shank
Finish: Galvanized, hot dipped
Specification:
1-1/2 x BWG8-BWG13
1-3/4 x BWG8-BWG13
2x BWG8-BWG13
2-1/2x BWG8-BWG11
1-1/2" - 3" x BWG 5-13
Packing: In carton of 20kg-25kg net each. Or in wooden case of 112lbs each, consisting of 16packets x 7lbs net each.
Uses: Roofing nails are mainly used for roofing, insulation and siding
BWG supplies furniture nails of various sizes, mainly used in furniture making, furniture repair, cabinet work, casings, etc.
Available in countersunk, checkered or plain head, diamond point, polished.
Application: Common round iron wire nails are used for general construction purpose, wooden cases and furniture.
Technical Info:
Commodity Name: Common Nails
Materials: Galvanized steel
Specifications: 3/8"-6", BWG4-20 for all kinds of round nails.
Packing: In wooden cases of 112lbs consisting of 16 packets x 7lbs net each. Or in cartons of 25kg net, or 20kg net, both palletized.
Technical Info:
Cut masonry nail is made of high-quality low-carbon-steel
Finish: Electric galvanized, hot dipped galvanized, blunt point and tapered shank reduce splitting
Sizes of Masonry Nail: 1"-4", 3d-20d
Packing: Bulk, box, bag, or according to customers’ requests
Uses: Cut masonry nail is mainly used for attaching wood to hinder block, mortar joints, brick walls, and fresh concrete BWG Wire Nails Co. provides quality iron wire processed nail products, used for general purpose applications as fasteners. Products include Roofing Nails, Fetter Ring Shank Iron Nails, Concrete Steel Nails, Flat Head Panel Pins, Shoot Nails, Common Round Iron Nails, Annular Thread Ring Shank Nails, Fine Iron Nails, Finishing Nails, Iron Brad Nails, Shoe Iron Tacks, Galvanized Iron Square Boat Nails, etc.
Finish can be: Polished, vinyl plated, blued, phosphated, hot dipped galvanized, temper hardened, electro galvanized or color painted. |
|
| » Posted by: BWG Wire Nails Co. [China] |
|
|
|
|
|
[Sell]
Shoot Nails |
|
|
BWG supplies shoot nails ranges from wire diameter: 3.2mm - 3.7mm
Nail Length: 32mm, 42mm, 52mm, 62mm, 72mm
Packing: According to customers’ requirements.
We supply shoot nails in various sizes.
Technical Info:
Materials: Galvanized steel or copper coated
Shank Type: Square
Head: Conical Type
Uses: Commonly used in making of wood boat, etc.
Collated coil nails are used in the industries of wood furniture, architecture, board package and fitment. Especially for the binding of batch woodwork and the parts which are not easy to be operated by manual hammer. It is the ideal successor to traditional manual bulk nail.
Features:
Collated coil nails can save time and labor;
It has strong penetrating power, beauty and long duration;
Using of coil nails can reduce labor intensity and improve production efficiency. Commonly, its efficiency is 30 times of that of manual operation.
Wire Coil Nails Technical Info:
Wire Diameter Available: 0.083", 0.099", 0.113", 0.120", 0.131"
Nail Length: 1-1/4" to 3-1/2"
Nail Shank Types: Smooth, screw, ring
Finish: Bright, vinyl coated, electro galvanized
Angle: 16 degree, 15 degree, 10 degree, 0 degree
Winding: Flat, conical
Nails: 200-400pcs/coil
Package: 20-60 coils/ ctns, 24-40ctns / pallet
Roofing Coil Nails Technical Info:
Angle: 15 degree flat or 16 degree conical.
Wire Diameter: 0.120"
Nail Length: 3/4" 7/8" 1" 1-1/4" 1-1/2" 1-3/4"
Shanks Type: Smooth.
Point: Diamond.
Finish: Bright, electro galvanized
Plastic Sheet Coil Nails Technical Info:
Angle: 15 degree flat or 0 degree flat.
Diameter: 0.113" 0.120" 0.131"
Nail Length: 50mm-100mm
Shanks: Smooth, screw, ring.
Point: Diamond.
Finish: bright, electric galvanized
BWG supplies steel finishing nails (headless nails) ranges from 16 to 125mm.
Technical Info: Cupped head, smooth shank, diamond point, polished surface.
Finish: Bright or electro galvanized
Uses: Headless finishing nails are used for furniture-making, interior or exterior upholstery.
Using of brad head nails greatly reduces the possibility of splitting when used in hard or brittle timber. This kind of nail is ideal for general joinery.
Features:
Small head allows for countersinking below wood surface for later filling to give smooth finished appearance. Brad head nails do not turn after driving. It only leaves a small hole for filling.
Technical Info:
Nails Length: 2"
Size: 6d
Bright finish.
Cupped brad head, smooth shank and diamond point.
Used on interior finish carpentry and trim.
|
|
| » Posted by: BWG Wire Nails Co. [China] |
|
|
|
|
|
[Sell]
Brad Head Nails |
|
|
Using of brad head nails greatly reduces the possibility of splitting when used in hard or brittle timber. This kind of nail is ideal for general joinery.
Features:
Small head allows for countersinking below wood surface for later filling to give smooth finished appearance. Brad head nails do not turn after driving. It only leaves a small hole for filling.
Technical Info:
Nails Length: 2"
Size: 6d
Bright finish.
Cupped brad head, smooth shank and diamond point.
Used on interior finish carpentry and trim.
Collated coil nails are used in the industries of wood furniture, architecture, board package and fitment. Especially for the binding of batch woodwork and the parts which are not easy to be operated by manual hammer. It is the ideal successor to traditional manual bulk nail.
Features:
Collated coil nails can save time and labor;
It has strong penetrating power, beauty and long duration;
Using of coil nails can reduce labor intensity and improve production efficiency. Commonly, its efficiency is 30 times of that of manual operation.
Wire Coil Nails Technical Info:
Wire Diameter Available: 0.083", 0.099", 0.113", 0.120", 0.131"
Nail Length: 1-1/4" to 3-1/2"
Nail Shank Types: Smooth, screw, ring
Finish: Bright, vinyl coated, electro galvanized
Angle: 16 degree, 15 degree, 10 degree, 0 degree
Winding: Flat, conical
Nails: 200-400pcs/coil
Package: 20-60 coils/ ctns, 24-40ctns / pallet
Roofing Coil Nails Technical Info:
Angle: 15 degree flat or 16 degree conical.
Wire Diameter: 0.120"
Nail Length: 3/4" 7/8" 1" 1-1/4" 1-1/2" 1-3/4"
Shanks Type: Smooth.
Point: Diamond.
Finish: Bright, electro galvanized
Plastic Sheet Coil Nails Technical Info:
Angle: 15 degree flat or 0 degree flat.
Diameter: 0.113" 0.120" 0.131"
Nail Length: 50mm-100mm
Shanks: Smooth, screw, ring.
Point: Diamond.
Finish: bright, electric galvanized
BWG supplies flat coutersunk head cement nails.
Technical Info:
Head: Flat, countersunk type
Point: Diamond type
Shank: Smooth, Fluted, Twisted, Spiral.
Finish: Bright, Eletro Galvanized, Blacked, Blue
Size: Length 1"-4"; Wire Nail Dia. 2mm-4.2mm.
BWG Wire Nails Co. provides quality iron wire processed nail products, used for general purpose applications as fasteners. Products include Roofing Nails, Fetter Ring Shank Iron Nails, Concrete Steel Nails, Flat Head Panel Pins, Shoot Nails, Common Round Iron Nails, Annular Thread Ring Shank Nails, Fine Iron Nails, Finishing Nails, Iron Brad Nails, Shoe Iron Tacks, Galvanized Iron Square Boat Nails, etc.
Finish can be: Polished, vinyl plated, blued, phosphated, hot dipped galvanized, temper hardened, electro galvanized or color painted.
http://www.wirenails.net |
|
| » Posted by: BWG Wire Nails Co. [China] |
|
|
|
|
|
[Sell]
bulletproof UD Fabric |
|
|
Our Unidirectional Fabric is formed by using current advanced international composite technology of unidirectional array of orthorhombic structure. Fiber arrangement is even, dense, tidy and smooth. This product is developed by Rongyi by using its competitive technology.
This product features soft quality, low specific gravity, waterproof, resistance to dampness and chemical corrosion, and anti-UV radiation, etc. It is popularly applied to light bulletproof jacket, body armor plate,ballistic helmet, explosion-proof shield, light hard armor and explosion isolation.
This product complies with GA-141-2001, standard of Ministry of Public Security. This product has approved by Ministry of Public Security as well as Bulletproof Equipment Quality Supervision and Inspection Center of China Arm Industry Ministry.And also passed the test NIJ Level IIIA of USA
160g/m2 1.2m*100m |
|
| » Posted by: Ningbo Rongyi Chemical Fiber Science&Technology Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
Stainless Steel Wire Mesh |
|
|
Woven wire mesh and wire cloth in stainless steel or other metals are mainly used as filter wire mesh, filter wire cloth or wire mesh screen. Stainless steel wire mesh is also written as stainless steel mesh, stainless wire mesh, stainless steel wire mesh cloth, stainless steel mesh screen, stainless steel wire netting mesh or stainless steel woven mesh. We introduce stainless steel wire mesh manufacturers and related information on stainless steel woven wire mesh and materials here.
Variety According to Processing Difference:
1, Woven Stainless Steel Mesh:
Stainless Steel Square Opening Wire Mesh ( Plain Woven & Twilled Woven)
Fine Filtration Wire Mesh Filter Cloth (Dutch Plain Woven, Dutch Twilled Woven, Five-Heddle Woven & Dutch Reverse Woven)
2, Welded Stainless Steel Wire Mesh
3, Twisted Hexagonal Wire Netting in Stainless Steel
4. Crimped Stainless Steel Wire Mesh Screening
5. Perforated Metal Sheet in Stainless Steel
6. Expanded Metals in Stainless Steel
Stainless steel wire mesh can be divided into stainless steel insect screening, stainless steel wire mesh filters, stainless steel woven fencings, etc.
Stainless Steel Wire Materials for Stainless Steel Woven Wire Mesh & Wire Cloth:
Stainless Steel Wire Type 304
Often referred to as "18-8" (18% chromium, 8% nickel) T-304 is the basic stainless alloy most commonly utilized for wire cloth weaving. It withstands outdoor exposure without rusting and resists oxidation at an elevated temperature up to 1400 Degrees Fahrenheit.
Type 304 L
Stainless Steel Wire Type 304 L is very similar to T-304, the difference being the reduced carbon content for better weaving and secondary welding characteristics.
Type 316
Stainless Steel Wire Type 316 is stabilized by the addition of 2% molydbenum, T-316 is an "18-8" alloy.
Type 316 has better resistance to pitting corrosion than the other chromium-nickel stainless steels where brines, sulphur-bearing water or halogen salts, such as chlorides are present. A valuable property of T-316 is high creep strength at elevated temperatures. Other mechanical properties and fabricating characteristics are similar to T-304.
Wire cloth woven of stainless steel wire T-316 has extensive use in chemical processing when better corrosion resistance is required than the regular chromium-nickel types.
Type 316 L
Type 316 L Stainless Steel Wire is very similar to T-316, the difference being the reduced carbon content for better wire cloth weaving and secondary welding characteristics.
Applications of Stainless Steel Woven Wire Mesh and Wire Cloth: Sifting and filtering in acid and alkali conditions. Slurry net in petroleum, sifting and screening mesh in chemical and chemical fiber industry, acid washing mesh in electric plating industry.
|
|
| » Posted by: Wire Mesh Manufacturers [China] |
|
|
|
|
|
[Sell]
plastic stool |
|
|
"Only professional manufacture" is our motto for the products, and based on mutual benefits, we take quick shipment and best service to serve every customer home and abroad.
Our company mainly manufacture PP bottle, PS bottle, AS bottle, PP lunch box and other kind of daily used plastic wares. To learn more details, please feel free to contact us.
|
|
| » Posted by: Zhejiang HuangYan JiaXin Plastic Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
PP box |
|
|
"Only professional manufacture" is our motto for the products, and based on mutual benefits, we take quick shipment and best service to serve every customer home and abroad.
Our company mainly manufacture PP bottle, PS bottle, AS bottle, PP lunch box and other kind of daily used plastic wares. To learn more details, please feel free to contact us.
|
|
| » Posted by: Zhejiang HuangYan JiaXin Plastic Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
sell lubrication oil filter LV |
|
|
Sino-NSH LV Lubrication Oil Purifier(Oil Regeneration, Oil Purification, oil reprocessing, Oil purify, Oil Recovery,Oil Processing,Oil Filtering ,Oil Filtration, Oil Treatment ,Oil Recycling ,Oil Restoration ,Oil disposal, Oil Reclamation)
Application
LV series is suitable especially for purifying and restoring hydraulic oil, machine oil, coolant oil and other lubrication oil. The most breakdown of machinery which has lubrication oil system results from contaminated lubrication in which has water, gas, impurities etc. LV series can rapidly remove water, gas, particulate matters and impurities from lubrication oil and improve properties of lubricating oil so as to greatly extend lifetime of machinery which has lubrication system
Features
Perfect capacity of removing impurities. The special filters of NSH are made of special materials which can eliminate various impurities, water and gas effectively and rapidly.
Automatic reverse washing system will extend the lifetime and improve the performance of the filters
High performance security system including pressure protection device and automatic temperature controller makes purifier operated safely
Online work
Easy handling and maintenance
Lower maintenance and replacement expenses
Small size, light weight, low noise
Available to mobile or stationary options
Various sizes and configurations (shield) available
|
|
| » Posted by: Sino-NSH Oil Regeneration Plant Co., Ltd [China] |
|
|
|
|
|
[Sell]
forklifts for sale |
|
|
http://blachdeker.com.pl/wozki.html
sell Dan Truck 09
capacity 8000 kg
lifting height 4 m
price 26 700 euro |
|
» Posted by: BLACHDEKER [Poland]  |
|
|
|
|
|
[Sell]
Sell Sino-nsh TF Turbine Oil Purifying plant |
|
|
NSH TF Turbine Used Oil Filtration Equipment (Oil Filtration/Oil Purification/Oil Treatment/Oil Recycling/Oil Restoration/Oil Regeneration/Oil Filtering/Oil Purifier/Oil Reclamation)
Application
TF series oil filtration equipment is particularly suitable for purifying turbine lubricating oil. It also applies to treat hydraulic, coolant oil and other lubrication in which contains large amount of water, vapor, impurities, sludge, dielectric and colloid.
It can eliminate them effectively and efficiently. TF series will result in the improvement of the properties of turbine oil, other lubrication and extend the maintenance period of turbine or other equipment which has lubrication system and keep them operated in good condition.
Description
TF turbine oil purifier series is developed by vacuum evaporation technology, coacervation technology, coalescing technology, separating engineering technology and refined purification technology. It can eliminate water, gas, impurities, colloid, dielectric etc. rapidly and effectively in high vacuum situation and make the waste oil renewed.
Turbine or other equipments which has lubrication system need be replaced frequently because of vapor, water and other impurities mixed with it. Otherwise, oil deterioration would result in breakdown of machinery or affect the normal running of machinery.
TF series can effectively extend the lifetime of oil and protect turbine and other machinery which has lubrication system from damage.
|
|
| » Posted by: Sino-nsh Oil Cleaner Facility [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 next»
|
|
|
